136,467 used machines on RESALE, but how to find them? Machine Search
Rotary vane vacuum pump running Manufacturer: Becker Type: KVT 3.140 Motor: 400V/50Hz suction power: 140m3/h end pressure: 100mbar (abs.) corresponds 90% vacuum Status: Generalueberholt Zubehoer: Vacuum filter mounted; User manual Further details or technical advice via request; ready for use
Waelz piston pump booster Manufacturer: Busch Type: Panda WV 0500 C/B and Panda WV 1000 C/B available suction swells: 500 - 1000 m3/h Performance: 12 months Status: Generalueberholt Delivery time: by arrangement; ready for use
Rotary vane vacuum pump - 2 stages - oil lubricated Manufacturer: Leybold Type: Trivac D 40 B /BCS Cat.-No.: 11286 Status: Generalueberholt Suction power: approx. 40 m3/h Endduck: approx. 5x10e-3 mbar Performance: 12 months Inclusive: User manual and oil Delivery time: ex works If you need another pump or spare parts, we look forward to hearing your request.; ready for use
Rotary vane vacuum pump incirculation lubricated: Busch Type: R5 RA 250D Status: Pre-performance Performance: 12 months Cleaner: Mineraloile Supply: Intake filter Delivery time: from stock; ready for use
Scroll vacuum pump Status: used, over-checked, functional Manufacturer: Edwards Type: GVSP 30 Motor: 400V Equipment: Mineraloel nominal suction digesters: 30 m3/h End pressure: <0.01 mbar (abs.) Including: user manual
Screw vacuum pump Manufacturer: Busch Type: NX 450 A Suction plugs: 450 m3/h Performance: 12 months Including: operating instructions, oil filling Status: as available as new date: by arrangement; ready for use
Rotary vane vacuum pump & oil lubricated Number: 5 pcs Status: Generalueberholt Performance: 12 months Manufacturer: Busch Type: RA160D Voltage: 50/60Hz 400V engine rated power: 4KW nominal suction digesters: 160m3/h end pressure: 0.5hpa(mbar) Inclusive: operating instructions, spare parts list delivery time: from stock; ready for use
Sales are made on behalf of the customer. Professional high-pressure cleaner DYNAJET 500th HELI Blue Performance The No. 1 in efficiency, power and performance. Professionals from all industries worldwide rely on dynaJET's highly efficient high-pressure water cleaners. These high-pressure units impress with their universal application possibilities, extreme cost-effectiveness, absolute reliability, long product life and uncompromising quality. Standard safety equipment offers you and your employees the highest level of safety. The latest generation of DYNAJET high-pressure units offers reduced fuel consumption, lower emissions and improved ease of use. Get efficiency, or even the opportunity to conquer new business areas, in your company. All DYNAJET high-pressure cleaners are comprehensively tested by our quality management before they are delivered. Our product and accessor ...
Rotary vane vacuum pump oellubene Manufacturer: Busch Type: RA 0016C Including: oil filling Status: advancer Performance: 12 months delivery time: by arrangement; ready for use
Blumer MCB III - label punching Technical Details · Max format : 700 x 1000 mm, · Min punched format : 10x10 mm, · Max punched format (non stackable)250 x 700 mm, · Max label format–stackable 150x 150mm, · Stack height : approx 50 / 80mm, · Punching pressure : 20tons, · Punching tool height:30 – 80mm. Additional Information · Delivery time IMMEDIATELY · Typ: MCB III · Year of man. 1988 · Condition: excelent · Located: Zagreb, Croatia Description · BLUMER MCB 3.1 PUNCHING MACHINE. The MCB 3.1 can punch any formats from paper, plastic, textiles, aluminium foil etc with fast program speed and high precision. Programming is via a freely programmable CNC, Storage capacity : approx 100 programs containing about 200 label positions each , numerically programmable. Machi ...
Rotary vane vacuum pump lubricated Performance: 12 months Manufacturer: Leybold Type: Trivac D8 B and type BCS available Cat No.: 11296 Status: Generalueberholt and repainted Suction power: approx. 8 m3/h Endduck: approx. 5x10e Operating instructions Delivery time: from stock Please contact further details or technical advice via enquiry; ready for use
Rotary vane vacuum pump Manufacturer: Busch Type: R5 RA 305 D Voltage: 50/60Hz 400V nominal suction digesters: 300m3/h End pressure: 0.5hpa(mbar) Status: Generalueberholt Gewaehrleistung- 12 months Including: engine re-storage, repainting, electric check delivery time: from stock; ready for use
Blumer MCB III - label punching Technical Details · Max format : 700 x 1000 mm, · Min punched format : 10x10 mm, · Max punched format (non stackable)250 x 700 mm, · Max label format–stackable 150x 150mm, · Stack height : approx 50 / 80mm, · Punching pressure : 20tons, · Punching tool height:30 – 80mm. Additional Information · Delivery time IMMEDIATELY · Typ: MCB III · Year of man. 1978 · Condition: excelent · Located: Zagreb, Croatia Description · BLUMER MCB 3.1 PUNCHING MACHINE. The MCB 3.1 can punch any formats from paper, plastic, textiles, aluminium foil etc with fast program speed and high precision. Programming is via a freely programmable CNC, Storage capacity : approx 100 programs containing about 200 label positions each , numerically programmable. Machi ...
Claw vacuum pump dry Manufacturer: Busch Type: Mink MM 1502 AV Motor: DS 400V suction power: 500 m3/h Final pressure: approx. 200 mbar (abs.) Zubehoer: Operating instructions delivery time: by arrangement; ready for use
Bitzer Screw Compressor NEW Type HSK 7471-90-40P Stroke volume 250cbm/h 90 hp electrical power. New
Resonance screening machine, Screening machine, Vibrating screen, Linear screening machine used Manufacturer: Binder + Co AG TYPE: SL1000GX.6.7 Year of construction: 1999 Sieve: 2 levels each approx. 4.2 x 0.9 m Upper level: Longitudinal grid with approx. 13 mm distance Lower level: plastic screen with approx. 9 x 9 mm mesh size Insertion height approx. 1.5 m Dimensions without drive approx. 6800 x 1700 x 1800 mm Resonance screens are used in the dry and wet screening of round and edge grain as well as leafy materials. They work according to the throwing principle. This machine was used in a glass recycling plant. Changes and errors in the technical data, information and prices as well as prior sale reserved.
used
Engine number: 8 069 531 Power: 45 kW Speed: 3000 1/min overhauled, no generator, no starter motor Price Excl. VAT, subject to prior sale Photos on request
Bosch Turbo Scara SR8 Robot + Control IQ200 Manufacturer: Bosch Order No. 3842999836 Serial No.3810198 HubPinole 40025 PN. pressure max. 8 bar Load max 8 kg Weight 51 kg + Control IQ 200 (Changes and errors in the technical data, information reserved!) Panning area see picture Item condition used In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please also note our other offers.' After purchase, the amount is due within 7 working days.
Rotary vane vacuum pump dry Manufacturer: Becker Type: VT 4.40 Condition: Generalueberholt Spannung 400V DS Suction valves. 40m3/h Performance: 12 months Delivery time: from stock Other pumps on request !; ready for use
Bitzer composite system with 3 compressors Bitzer Type 4-H15.2Y with control box
Bosch Turbo Scara SR 800EC robot + control IQ 150 + handheld control unit PHG 2000 Manufacturer: Bosch Order No. 3842506428 Series No. 764840020 Maximum load on gripper flange: 100 N Stroke 3rd axis 320 mm Pn.-Duuck 4-8 bar Weight: 100 kg Swivel range see diagram Item condition used In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please also note our other offers.' After purchase, the amount is due within 7 working days.
Bitzer compressor type 4H-15.2Y, 73m. Lifting volume. Have 5 pcs of it.
used
Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop
Long reach - flail mower for rear three point attachment, cutter head 125 cm with hammers (380 g) and bottom roller. Bowden cable control, own hydraulic system, drive via PTO 540 RPM. Range horizontal 507 cm from tractor centerline, vertically to 500 cm, tractor weight minimum 2100 kg; min. 37 kw/50 hp required (factory specifications). Other smaller long-reach flail mowers and mower technology on stock!
The CP22 belongs to the series of gasoline-powered high-pressure machines with a pressure of 170 to 500 bar and a volume flow of 16 to 46 l/min. The machine has pneumatic tyres with a parking brake on the rear axle and swivel castors on the front axle. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The machine measures 1060 x 760 mm and is 850 mm high. The Honda engine is equipped with electric starter. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CP22-170 170 bar 46 Lpm CP22-220 220 bar 36 Lpm CP22-280 280 bar 27 Lpm CP22-350 350 bar 23 Lpm CP22-500 500 bar 16 Lpm General Specifications: ----- Drive motor: 2 Cylinder 4 Stroke Petrol Engine, Electric Start Power of the drive motor: 16.4 kW Spee ...
used
Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop
New SGB transformers 1000KVA power voltage: 10/20kv - 690V SWITCHABLE other services and voltages also available easy questions! SEE photos was still never used available now 6 PCs of nationwide cheaper delivery issues is always available: Mr Serhan 01727265324 or e-mail: Transformatoren@gmx
GEA-CFS” fryer Type BRN 3000/500 all stainless steel electrically heated 84 kW frying length 3.000 mm belt width 500 mm mechanical lid oil level control teflon-infeed extra infeed conveyor 5 mm extra outfeed conveyor 5 mm oil circulation pump filter sediment removal system electrical hoists fire protection total length ± 6.650 mm total width ± 1.500 mm total height ± 3.200 mm
Workbench width: 2,860 mm / Height: 900 mm / Workbench depth: 800 mm We offer you here a used workbench frame of the manufacturer Vogelsang for sale. Technical data for the workbench frame: Manufacturer: Vogelsang Type: NS Included in delivery are: 02x workbench stand, new Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 110 x 50 mm Clear width: 2,700 mm 08x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.
used
all stainless steel suitable for thermal oil heated with top hold down belt with canopy nett belt length 6.000 mm nett belt width 1.000 mm adjustable speed infeed conveyor outfeed conveyor sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 9.250 x 2.000 x 3.450 mm ± 359 kW
Workbench width: 2,860 mm / Height: 900 mm / Workbench depth: 1,000 mm We offer you here a used workbench frame of the manufacturer Vogelsang for sale. Technical data for the workbench frame: Manufacturer: Vogelsang Type: NS Included in delivery are: 02x workbench stand, new Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 110 x 50 mm Clear width: 2,700 mm 08x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.
Angle gearbox Bondioli Pavesi type 2061 Used gear brands make "Bondioli Pavesi", i = 1 : 1.93 for up to 59 kw input power at 1,000 1/min. With mounting plate with oblong holes, with or without 4-grooved pulley and Taperlock for sale.
Kuhse control cabinet for CHP incl. breaker 800A
Barsso” vacuum tumbler Type 5 Bartumb NEW ! all stainless steel PLC control with 50 programs max. load : ± 500 kg adjustable speed from 0 up to 9 rpm with vacuum pump Büsch with water filter dimensions (l x w x h) : 2.550 x 1.300 x 1.650 mm
Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 800 mm We offer you here a used workbench of the manufacturer Jung Heinrich for sale. Included in delivery are: 02x workbench stand, used Material color: blue Frame profile: 76.2 - 100 mm Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 85 x 40 mm Traverse type: GN85x41mm Clear width: 2,775 mm 08x safety pins, used Version: completely galvanized 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,980 mm Depth chipboard: 800 mm Surface: coated if necessary (possibly two-part) 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,755 mm Depth chipboard: 800 mm Surface: coate ...
Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 1,000 mm We offer you here a used workbench of the manufacturer Jung Heinrich for sale. Included in delivery are: 02x workbench stand, used Material color: blue Frame profile: 76.2 - 100 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 85 x 40 mm Traverse type: GN85x41mm Clear width: 2,775 mm 08x safety pins, used Version: completely galvanized 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,980 mm Depth chipboard: 1,000 mm Surface: coated if necessary (possibly two-part) 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,755 mm Depth chipboard: 1,000 mm Surfac ...
BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Fabr. -No.: 216 105 // Type: ATMOS V4-KR Var. 0102 Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL
RECON Part number: 1202 7073 / 3.601.0.170.601.4 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
front roller 600 x 1500 for mixing mill Buzuluk 14240 (KG40) Unused
rear roller 600 x 1500 for mixing mill Buzuluk 14240 (KG40) unused
Manufacturer: Busch Type: Mink MM 1142 BV Motor: DS 400V Suction power: 140 m3/h Final pressure: approx. 60 mbar (abs.) Zubehoer: suction filter; Operating instructions delivery time: short-term; ready for use
maximum number of results exceeded
please refine your search
