128,879 used machines on RESALE, but how to find them? Machine Search
Used mozzarella production line. New 2013. The line includes: - Tank for preliminary pressing of cheese curd - LT150 thermizer - Molds for shaping the curd - Chilled water tanks - Brine tanks - Tube heat exchanger for cooling brine Cheese curd plasticizing set consisting of: Tanks for pre-pressing cheese curd with an automatic device for cutting into small portions. The prepared cheese curd is fed into the thermizer for plasticization. The plasticized mass is manually formed into cheese molds. The portions prepared in this way, packed in molds, are cooled in an ice water tank. After cooling, they are removed from the molds and placed in brine tanks. After salting, the mozzarella blocks are sent to a ripening room with specific temperature and humidity parameters.
Key data: 18 , 8 , 3
Screw compressor Mannesmann DEMAG SE 30 S 3 m³/min, 8 bar, 18.5 kW Good condition Test run carried out Ready for action
High-quality lattice supports with high load capacities, inexpensive alternative for gratings – Brand new – Prices on request! Manufacturer: Delta Shelving Type: Manta Mesh Standard width: 885mm (with a 2.70m trusss then 3 supports are needed = 2.655mm) 1335mm Frame depths: 1.05m 1,10 1.20m Other depths on request! Evenly distributed load: between 250 and 1,500kg Standard (price applies to the standard version): 1.000kg, i.e. also per pallet Lattice grid: 50 x 100 or 25x100mm Please also indicate which beam type (truss type) you have! So whether box profile (or IPE carrier) 50 or 40mm, or whether they have trusses with step. Advantages: no sharp edges 200% safety factor – independent of the shelf beams Bealstable for permissible deflection and structural failure Large selection of standard sizes and load capacities MantaMESH is our market-leading wire me ...
Diesel-Generator Power: 500 kVA Year: 1997 Operating hours: 49612 Generator: Stamford HC I534D1 Speed: 1500 1/min Voltage: 400/231 V, 50 Hz Battery voltage: 24 V 20 ft container Weight: 8.5 tons Manual switchgear with motor monitoring Subject to prior sale - errors possible! Internal reference number: E-1004-49
Manesty D3B tablet press Serial: 24D117 Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph
Manesty D3B tablet press Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph
Key data: 65
MAN E0826 E302 Natural Gas Generator Set for sale. Model: MAN E0826 E302 Fuel: Natural Gas Year: 2004 Capacity: 65 kW Hz: 50 Voltage: 400 V Scope of supply: Engine, alternator, acoustic canopy with panels, exhaust gas heat exchanger and other accessories. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
Perfector 1/5 and 6/0, RCI CCI Comand Table, SAPC Semi Autoplate Change, Rolandmatic Dampening with Technotrans Refrigerator, Auto-Wash, Double Size Impression Cylinders, Roland Mabeg Jet Feeder, Steel Plate on Overlap, High Pile Delivery, Autosize, IR Dryer and UV Dryer, Standard Accessories
Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Mann air filter housing with: filter -Inlet/outlet: Ø 80/70 mm -Part Number: 43 905 63 8981 -Dimension: Ø 260/400 mm -Weight: 11.5 kg
SUB: FOR SALE... MAN 8L 20 / 27. USED CRANKSHAFTS AT TURKEY HAVE A GDY SIR WE VE 2 PCS USED MAN 8L 20 / 27 CRANKSHAFTS AT OUR STOCK AT TURKEY.. CRANSHAFTS MEASURMENTS IN STANDART SIZE LIMITIS CRANKSHAFT CLASS STAMP ON ATTACHED PICTURE. CRANKSHAFTS ARE READY TO INSPECTION AT WORK SHOP IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Regards; Aliaga marine services E-mail: infoaliagamarine.com PHN/fax: + 90 232 618 03 88 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY
Laboratory power supply, power supply, voltage generator, laboratory power supply -Input: 230 volts AC -Output: 0-30 volts DC -Dimensions: 150/240/H130 mm -Weight: 4.5 kg
Manz Automation aico.panel 80036808 Touch-Panel 19" aico.box.IPC V2 81009594 Set Item Condition: New as pictured Possible traces of storage, installed but not put into operation. Type: aico.panel Art-No.: 80036808 24VDC/2A Type: aico.box.IPC V2 Art-No.:81009594 REV: 2.1; 100-240 VAC / 4-2A; 50/60Hz Incl. accessories 30kg More items - new and used - can be found in our shop! International shipping costs on request!
58 Mw MAN 18V48/60TS power plant 50 Hz 3 x Man 18V48/60TS generators together with auxilary equipments Approx 4000 Working hours each 58 Megawatts total power 19305kw each at 500 RPM and 50 Hz Engines year of build 2014 with ABB AMG1600UU12 DSE Alternators Alternators year of build 2015
Torque wrench, torque tool -Recording: 1/2 inch -Torque: 4-13 mkp -Dimensions: 630/110/H40 mm -Weight: 1.2 kg
Key data: 630 mm
Manual Tin Shears / Guillotine Shears with Table - Heavy-duty design - Adjustable front stop 360 mm - with table and runway Specification - Max. cutting length: 630 mm - Table dimensions WxD: 630 x 540 mm - Front stop: 360 mm - Dimensions WxHxD: approx. 1000 x 1200 x 2000 mm - Weight: approx. 300 kg
ID2954 Niemeyer manhole finisher year/Year of construction 1996 Manhole finisher, with conveyor belt, vibrator, outlets, wall traverse, filling carriage, manhole inserts (worth approx. 23,500 euros), accessories Shaft ring paver, with feed belt, vibrator, outlets, wall traverse, filling trolley, shaft inserts (worth approx. 23,500 euros), accessories
amount: 1 STK height: 450 mm external diameter: 340 mm Filter cartridge/3-5µm 340 x 450 mm - H 34 2240/40 KIT MANN FILTER Oil filter element Mann filter element for oil of the highest quality for wire erosion, die sinking and spark erosion drilling. The Mann + Hummel H 34 2240/40 KIT oil filter element reliably removes dirt and solid particles such as dust, metal abrasion, oil, carbon, soot, etc. It offers protection and is used for the filtration of engine, hydraulic and gear oil. Technical data Height: 450 mm Outer diameter: 340 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pre-filter, intake air filter, air filter housing, air filter housing, alternator air filter, adapter tube -Manufacturer: Mann, adapter tube type 3900025327 -Size: from Ø 200 to Ø 150 mm -Total dimensions: Ø200/H105 mm -Weight: 0.6 kg
Pre-filter, intake air filter, air filter housing, air filter housing, generator air filter, adapter tube, pipe bend -Manufacturer: Mann, elbow 90° Ø 150 mm -Total dimensions: 360/220/H155 mm -Number: 8x sheets available -Price per piece -Weight: 1.5 kg
Key data: 70
MAN E0836 E302 CHP Unit in Acoustic Canopy for Sale. Capacity: 70kW Hours: 4,500 Year: 2011 Fuel: Natural gas Voltage: 400 Hz: 50 Scope of supply: Engine, Alternator, Control Panel, Acoustic canopy, Canopy fan, Engine water pump. Footprint of the combined heat and power unit is 3.4 meters x 1.14 meters including the control panel. It has been serviced every 1000 hours. The unit is not due an overhaul until 24,000 hours. Engine has been barred over, and the canopy fan and engine water pump have been powered up. The unit is in a warm boiler room so is in good condition. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Mann Filter, micro Top Air Filter Type C 17 160 Ovp -Number: 3x air filters included -Price: per piece -Packaging dimensions: 180/180/H230 mm -Weight: 1.1 kg/pc.
Man 12 Cylinder container for sale. Price: Please Apply Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
winch rope, crane rope, hoist rope, wire rope, stainless steel rope -Manufacturer: Manitowoc, crane rope Ø 17 mm -Length: about 250m -Item No.: 03120320 D17 x 250M -Price: complete -also other crane ropes: available -Transport dimension: Ø 700 x 600 mm -Weight: 420 kg
MAN ROLAND R 504 0B + Lv year 2007 A 4 Colors Offset press with Coater of size 53 x 74 cm (72 Mio. Imp.) Including : RCI with CCI Color Pilot Press Pilot, DeltaMatic Dampening with Technotrans, Auto. Impression Cylinders, Blankets and Rollers Washers, PPL Auto. Plate Loading, QuickStart, LCS, Auto. Size settings, Suction Feeder band, Coating Unit with Extended Delivery Air Glide, SeccoMatic Hot Air, CIP 3, Grafix powder spray, Straight. Machine in Super Condition, As NEW, Still in Production till End of May 2024
Key data: 220
MAN Lean Burn Biogas 2876 LE302 Containerised Generator. Model: MAN Lean Burn Biogas 2876 LE302 Capacity: 220 kW Hours: 0 Year: 2023 Fuel: Biogas V: 400 HZ: 50 Scope of supply: New MAN 2876 LE302 and ComAp Control Panel. Used Container, Alternator, Radiators and Gas line. MAN Engine comes with manufacturers warranty. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
MAN 6L23/30 Crankshaft in good condition STD size, Measurment Control, Hardness Control, Crack Test, Oscillation tests done From our istanbul stock contact us at: infofin-marine for more information
MAN 27/38 Cylinder heads Std sized seat bores Free of cracks and weldings 20 pcs available in good condition From our istanbul stock Please contact us at infofin-marine
MAN 28/32H spares available: MAN 28/32H 15 pcs cylinder heads with std sized exh seat bores free of cracks and weldings MAN 28/32H pistons 10 pcs std sized ring grooves free of cracks and weldings MAN 28/32H connecting rods 5 pcs free of ovality and cracks MAN 28/32H water jackets 8 pcs From our istanbul stock Please contact us at infofin-marine
MAN 32/40 Cylinder heads Augsburg type 11 pcs available froms stock in good condition std sized seat bores, free of cracks and weldings from our istanbul stock
volume capacity: 5,63 m³/min suction: 1 bar pressure: 8 bar turning speeds: 3000 U/min engine output: 37 kW dimensions of machine L x W x H: 1,35 x 1,05 x 1,43 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MAN 7L32/40 Crankshaft Std sized Free of cracks , weldings or oscillation Reports available
Globoidal cam gears, indexing, oscillator indexer, index gear -Manufacturer: Manifold, Transmission Clutch Indexing -Type: V-1-C 5 120 -Shaft: Ø 48 x 145 mm -Indexing angle: 120° -Number of stops: 5 -Dimensions: 400/385/H395 mm -Weight: 151kg
Globoid gear, indexing, oscillator indexer, index gear -Manufacturer: Manifold, gearbox from rotary indexing table type RTU 800 8-150 -Translation: i = 1:8 45° -Dimensions: see photos -Quantity: 2x gears available -Price per piece -Dimensions: 470/375/H500 mm -Weight: 172 kg/pc.
SPECIFICATIONS: Dimensions of the work table mm: 2500 x 1300 Number of pistons: 4 Diameter Ø 90 mm Piston stroke mm: 470 Complete with intermediate plate Operation with water
Key data: 92 KW, 100 kVA, 400 V
MAN Diesel (emergency power) D2565 ME Diesel generator from 1977 with 402 operating hours, complete with controls, silencer and cooling but without day tank. 1 available 80 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer TA 2252L11, 100 KVA Gas engine MAN D2565 ME Manufacturer: MAN Model: D2565 ME Type: Gas Engine Serial number: 383045/53 Power [KW]: 92 Year of Make: 1977 Hours: 402 Weight unit [kg]: 1,670 Dimensions LxWxH [cm]: 250 x 80 x 180 AC Generator Leroy Somer Manufacturer: Leroy Somer Model No.: TA 2252L11 Type: AC Synchronous Generator Serial Number: 84922,2 Power [KVA]: 100 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 152 Speed [1/min]: 1,500 Year of Make: 1977 Weight [kg]: 560
Bosch Injection Pump for MAN D2842 LE211 with GAC controller, cf. MAN part number: 51.11103-7451 59.11103-7451 N (l/min): 750 RW (mm): 12.7 or 13.6 EPP-FM (mm³/H): 332 or 367
Holder for oil filter MWM 232 for sale Mann & Hummel Part Number: 6751283106 MWM Part Number: 2404242170
Make: MAN Model: 5L21/31 Mfg date: 2012.03 Output: 1000 kW Speed: 900 RPM Generator: Hyosung Corporation Type: HMD500-08 Output: 1175 kVA Voltage: 450 V Frequency: 60 Hz Quantity: 2 Weight: 5500 kg
Boiler for spiral mixer, Fabr.Kemper SPA 125, manual locking
MAN 18V51/60 new spare parts Brand new with 0 hours 18.900 Kw at 514 RPM Year of make 2019 Following spare parts available: 18 new pistons complete available 18 new cylinder heads complete available 18 new connecting rods complete available suitable for MAN 48/60 18 new liners available New Std sized crankshaft available suitable for MAN 18V48/60 18 new fuel pumps available 18 new Fuel Injection Valve Complete With Injection Nozzle available 1 new turbocharger available 18 new camshaft piece available
TO WHOM IT MAY CONCERN ; WE VE USED STANDART SIZE CRANKSHAFT OF MAN 8L 27/38 AT OUR STOCK IF YOU VE ANY FURTHER QUESTIONS . IT WAS DISMANTLED FROM GENERATOR ENGINE PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
TO WHOM IT MAY CONCERN ; WE VE USED STANDART SIZE CRANKSHAFT OF MAN 6L 27/38 AT OUR STOCK IF YOU VE ANY FURTHER QUESTIONS . IT WAS DISMANTLED FROM GENERATOR ENGINE PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
Key data: 550 KW, 11000 V
MAN E3262 LE202 gas generators Year of make 2015 50 Hz 550 Kw at 1500 RPM 4 units available 2 units with 0 hours and 2 units with very low working hours Auxiliary equipment also available
Key data: 254 KW
Model: MAN E2848 LE322 Hours: 14,651 Year: 2010 Fuel: Natural Gas Capacity: 254 kW Hz: 50 V: 400 Scope of supply: Engine, Alternator, Frame, Control panel, Gas Line. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange .
Used machine in good condition. Available for immediate delivery. - Power source : 80 kVA - Axes: 5 - Control: SIEMENS 840D
Stockpresse / Spindle Press Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
hydraulic unit -The hydraulic unit comes from a hydraulic elevator -Design: IM 1209
maximum number of results exceeded
please refine your search
