man b used for sale

General SKU397X1155 MakeNiro-Aeromatic LocationBarneveld TypeT6 Main Features MaterialStainless steel Volume540 Ltr. Motor20 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pancheck 2x With pan mounted on wheelscheck Capacity540 l. Pan sizesø 1280 x 550 mm Can be heated by steamcheck With fancheck Capacity2 m3/s Motor2,0 kW, 380 V With dust filtercheck Filter surface21 m²: Fine dust filter: 38,6 m² MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) Information No.929057 Year of construction1992 With switchgearcheck Extra Specifications Heating capacity: :208.3 kW Steam overpressure: :4 bar Max. allowable operating overpressure: :6 bar Test overpressure: :7.8 bar Max. steam consumption: :356 kg/h Average steam consumption: :190 kg/hFluid bed dryers batchAeromaticDryers > Fluid bed dryers batchBrand > Aeromati ...

General SKU397X1154 MakeNiro-Aeromatic TypeT3 No.919054 Year of construction1990 LocationBarneveld Main Features MaterialStainless steel Volume123 Ltr. Motor7.5 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck Granulatorcheck With pancheck With pan mounted on wheelscheck Capacity0,123 m³ Capacity0,186 m² With sprayercheck (CIP) Can be heated by steamcheck With fancheck Capacity0.5 m³/s Motor7,5 kW 380/660 V (EEx E II T3) With dust filtercheck Filter surfaceExhaust filter 3.5 m²: HEPA supply air filter 36 m² MaterialStainless steel 1.4305 (303), Stainless steel 1.4552, Stainless steel 1.4301 (304), Stainless steel 1.4306 (304L) Information With switchgearcheck (as is) Floorspace7,6 x 0,78 m Total height3,5 m Extra Specifications Filter housing – explosion pressure resistance (pressure shock resistance): 10 bar(g) Exhaust air filter  ...

General SKU397X1157 MakeNiro-Aeromatic TypeT6 No.879012.1 Year of construction1986 LocationBarneveld Main Features MaterialStainless steel Volume540 Ltr. Motor20 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pancheck 2x With pan mounted on wheelscheck Capacity540 l. Pan sizesø 1280 x 550 mm Can be heated by steamcheck With fancheck Capacity2 m³/s Motor2,0 kW, 380 V With dust filtercheck Filter surface21 m²: Fine dust filter: 38,6 m² MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) Information Extra Specifications Heating capacity: 208.3 kW Steam overpressure: 4 bar Max. allowable operating overpressure: 6 bar Test overpressure: 7.8 bar Max. steam consumption: 356 kg/h Average steam consumption: 190 kg/h Fluid bed dryers batchAeromaticDryers > Fluid bed dryers batchBrand > Aeromatic What you can expect from Foe ...

Manufacturer: Brandt KDF mit Fügefräsen, Type: Profiline KDF 670, Year: 2005, Barcode: 0,5-3, Min-max edge material mm: 120-3500, Work piece width min-max mm: 10-55, Min.-max. workpiece length in mm: 10-60, Edgeband height max mm: 20, Luftkissentische Einlauf: Umstellung von 2mm auf Fase automatisch, mit Vakuum: yes, mit Klemmung: yes, Machining cracks: yes, Fine milling: yes, Application of separation agent: yes, PU-EVA: yes, Laser technology: yes, kW Leistung Laser: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, with tool holders: yes, Nut Motore: yes, Type of scraper: yes, Number of tools per tool-magazine: yes, Number of sanding units: yes, Buffing unit: yes, Top pressure belt/roller: yes, Workpiece support: yes, Workpiece return: Rolle, Return type: yes, System dismantled: ca. 6700, FREE TEXT: ZHR 01, : ink Rückführung/ Verfügbarkeit ca. ab Jul ...

Manufacturer: Bütfering, Type: SCO 413/TQEQ, Year: 2007, Control: Programmspeicher 600, Barcode: möglich, Monting of the machine: Querschleifen/Längschleifen/Querschleifen/Enststaubung, Sanding width mm: 1350, Sanding hight mm: 160, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rollers: keine, Transverse sanding units: 2, Längsschleifaggregate: 1, Bürstenaggregate: 1, Belt 2 shoe unit: Querschleifen, Band 2 Leistung kW : 13,5, Band 2 Schleifbandgeschwindigkeit m/s : 2-16, Belt 2 synchronous and reverse run: Längsschleifen, Band 3 Kombiaggregat Walze/Schuh: Schuh, Band 3 Leistung kW : 15, Band 3 Schleifbandgeschwindigkeit m/s : 2-18, Band 4 Kombiaggregat Walze/Schuh: Querschleifen, Band 4 Leistung kW : 13,5, Band 4 Schleifbandgeschwindigkeit m/s : 2-16, Separation of sampling in mm: 25, Frequency control of belts: 3, Continous adjustable feeding speed m/min: 4- ...

Manufacturer: Brandt, Type: KD 85, Year: 1998, Control: Homatic NC 21, Min-max edge material mm: 0,4-20, Work piece width min-max mm: 70, Min.-max. workpiece height in mm: 8-55, Min-max feed m/min: 7+25, Einlauflineal gesteuert: yes programm, Premilling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: 8 Kilo, Number of sanding units: 3, Edge sanding: 1, Profile sanding top bottom: 2, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Compressed air bar: 6, Machine lenght mm: 10900, Noise enclosure: yes, FREE TEXT: Schiebeanschlag Einführung Rechtwinkliger Teile/Dr ...

Manufacturer: Bütfering, Type: AWS 2CE 1100, Year: 1992, Monting of the machine: Walze / Schuh, Sanding width mm: 1100, Sanding hight mm: 150, Number of sanding belts: 2, Sanding belt dimensions: 1110 x 1900, Steel roller: yes, Band 1 Leistung kW : 15, Band 1 Schleifbandgeschwindigkeit m/s : 5 / 10, Band 2 Schuhaggregat: 11, Band 2 Schleifbandgeschwindigkeit m/s : 5 / 10, Band 2 Gleich und Gegenlauf: yes, Frequency control of belts: no, Transportbandantrieb kW: 1,5, Intermediate sanding of lacquer: no, Constant table hight: yes, Vacuum table: no, Noise enclosure: yes, Brushing unit: 0,55 kW, Weight in kg: 3300, Year :1992

Manufacturer: Brandt, Type: KE 22 F, Year: 1991, Edgeband thickness max mm: 20, Edgeband height max mm: 55, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Work piece thickness min mm: 150, Coil magazine: yes, Feeding speed max m/min: 7-25, Machine lenght mm: 10000, Compressed air bar: 6, Premilling: yes, Strip magazin: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: no, Ziehklinge Radius: yes, Flat scraper: yes, Buffing unit: yes, Glue system granulate/cartridge: Granulat, Top pressure belt/roller: Rolle, KS 10 Bandschleifaggregat für Funier oder Massiv, Year :1991

Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  Application: CSD Hygienic design condition: good technical con ...

Overview  The machine was built in 2008 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be inspected at any time. Technical data Capacity: last 21.115 bph (at 1,5l)  Formats: 500ml, 750ml, 1.000ml, 1.500ml  PCO 1881  Operating voltage: 400V/ 50 Hz   Control voltage: 24 VDC  Scope of delivery  Blow molding machine | SIG Corpoplast | BLOMAX 12 | 2008  Preform feeder | Transver AG | - | 2008 Silo  Elevator  Sorting Chute

In-store baking oven Unox Bakertop 6 Convection oven for 6 trays 60x40 Upper hood with steam codensator Proofer bottom for 6 trays 60x80 Connection 400V, 32A-CEE plug Used oven & SAB tested with warranty

Residual bread chopper Bio 2 for all light/dark leftover breads etc. "the organic universal shredder" Robust technology Connection 400V, 16A-CEE plug Used machine

Overview  This complete Bag‑in‑Box filling line was manufactured by OETTEL Maschinen GmbH, CERMEX, and PRECIA MOLEN. The line is designed for filling water and syrup into Bag‑in‑Box formats. It was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The line is described as fully operational, is available immediately, and can be visited on request. Preventive maintenance was carried out twice per year; the last maintenance took place in January 2025. Palletizing, stretch wrapping, and pallet labelling equipment were upgraded in 2017 and 2023. Technical data Capacity: 5 L BIB: 650 BIB/hour / 7 pallets/hour 19 L BIB: 420 BIB/hour / 13 pallets/hour Formats: 5 L / 19 L Bag‑in‑Box Application: Water and syrup Configuration: Carton forming, Bag‑in‑Box filling, checkweighing, carton closing, conveying, palletizing, stretch wrappi ...

CORDEC automatic outfeed with bundling and stacking, Manufacture year 2025, Automatic ouffeed system for:, - outfeed for single pieces with automatic stacking, - outfeed for manual bundling with automatic stacking, Consisting of:, - Outfeed system with cross transport, - Event end rollers, - Cross transport (liftable), - Bundling station for manual bundling, - Roller conveyor, - Strapping machine, - Roller conveyor, - Paternoster stacking system, - Hydraulic lifting table with cross chain transport, - Cross chain transport for packages

Key data: 1100 mm, 3 , 150 mm

Wide belt sander BÜTFERING, AWS-3E-1100, # 0-001-747-312, year 1991 TECHNICAL DATA: Working width max. 1,100 mm Working height max. 150 mm Abrasive belt width 1,110 mm Sanding belt length 1,900 mm 1. Grinding unit Profiled steel contact roller D=200 mm Motor power 15 KW 2. Grinding unit Combined contact rolling - grinding shoe unit Profiled rubberized contact roller, D=150 mm Air cushion sanding shoe Motor power 11 kW 3. Grinding unit Grinding shoe unit, electronically controlled link pressure beam Element width 30 mm Synchronization / counter-rotation Infinitely variable sanding belt speed (frequency converter) Digital display of the sanding belt speed Motor power 11 kW - Transport carpet with stepless belt feed 3 - 15 m/min. - Vacuum table / vacuum clamping device 11 kW - Rotating cleaning brush 0.75 kW - Digital display of the grinding height - ...

General SKU290P488 LocationBarneveld MakeHeinkel Aktiengesellschaft (DE) TypeHF 600 No.1083/11 Main Features MaterialStainless steel Motor22 KW Inlet diameter600 mm Specified Features - Basket centrifuge Basket centrifugeInverting filter centrifuge Rubber linedTFE Capacity52 Ltr Basket sizesdia.600mm x220mm Max. loading weight65 KG Liquid outlet125x125mm Hydraulic drivefor discharge With hydraulic unitcheck Motorfor rotation 22 KW, 400 Volt (EExde IIC T4) Max. basket speed1936 rpm Max. temperature100 degr.C, MaterialStainless steel 1.4571 (316Ti) Information Year of construction1988/2003 With switchgearcheck Floorspace3,0x1,0 M Total height1,5 M Weight2700 KGBasket centrifugesHeinkelCentrifuges > Basket centrifugesBrand > Heinkel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to a ...

Key data: 300 mm, 3920 mm, 34 mm

Extensive standard equipment: Double Column Structure Double Vice with Full Stroke Tension (Hydraulic) Floating Pendulum Vise Hydraulic Saw Band Tension Automatic feed in pendulum mode (500mm) Carbide saw blade guide system Stepless speed control by inverter Driven wire brush Work Light Automatic Chip Conveyor User-friendly NC control with touchscreen Display of belt speed on the touchscreen Flushing hose for machine cleaning

Crate washer with incline conveyor We will be happy to plan your machine, and change, supplemented conveyor technology

Overview  This 5/10hl 3-device brewhouse was manufactured in 2017 by the Austrian manufacturer Labu. The brewhouse has various automation features such as automatic starting, automatic sparging and automatic spent grains discharge. It is currently available for sale, including additional equipment. Technical data  Capacity: 5/10hl Electrical heating: 27kW / 400V (special ceramic heating element) Equipment: 3 appliances: brewing kettle, lauter tun, whirlpool Additional equipment included: Manual filler (wall-mounted) Keg filler 2 fermentation and storage tanks (650L each) 1 fermentation and storage tank (1200L) All tanks from L-Inox, equipped with jacket and cone cooling (3 bar operating pressure, tested up to 4.5 bar) Glycol cooler Plate heat exchanger Scope of delivery  1x 5/10hl 3-device brewhouse (brewing kettle, lauter tun, whirlpool) 1x manual filler (wall-mounted) 1x keg filler  ...

Balers, Bramidan, 4-x 30 SLD, 30 to. Pressing force – used - : Price from location: only 3.950.-€ (net) Manufacturer: Bramidan Type: 4-x 30 SLD Number: PEY297206-3 Year of Make: 2008 H: 2300mm / W: 1800mm / D: 1500mm Weight: 1.850kg 3x230/400V, 25/16 Amp, 4kW Condition: good (the photo with the flutter tape is only so that the press is no longer used because a new, larger one was purchased) Available: immediately Location: Husum Instruction manual is available

The Brewiks 500 is a two-vessel microbrewery system operating on a plug-and-brew principle. It consists of a mash tun and a lauter tun, both on wheels, which together function as mash tun, filter tun, boiler, and whirlpool. Average output is up to 580 litres of high gravity wort per 6-hour brew cycle. Construction and Certification - The system is manufactured from quality stainless steel AISI 304/316 and carries a CE certificate. - Both vessels are stone wool insulated and mounted on stands with wheels for easy repositioning. Mash Tun - Included Equipment - 7-inch touchscreen controller - Electrical installation with 40 kW electrical heaters - Hygienic pump - Water heating system - Heat exchanger for heating sparging water - Pipe heat exchanger with hot water recuperation - Stone wool insulation - Valves and fittings - Stand on wheels - Condensing lid with silicon seal and drain tu ...

Manufacturer: Brandt Type of Machine : Edge Banding Machine Model: KDF 220 Year of Manufacture: 2012 Technical Specifications - Supply Voltage: 400Y/230V - Phases: 3-Phase - Frequency: 50 Hz - Fuse: 16 A - Maximum Operating Full Load Current: 14 A - Short Circuit Current Rating: 5 kA rms symmetrical - Control Voltage: 24 V - Largest Motor: 4.5 A - Largest Heater: 2.4 A - Enclosure Type: 1 Find more here - / Contact us at -

Bright Beer & Fermentation Tanks Speidel 3 x 625 liters Top condition, vertical stainless-steel bright beer and fermentation tanks, made by Speidel in year 2019. Tank side walls are double jacketed which can be connected to a cold-water source for a product temperature control. Technical characteristics Manufacturer Speidel GmbH, Germany Manufacturing year 2019 Manufacturer’s type BBT FD-082-S Tank volume 625 litres Number of tanks 3 pcs Tank material Stainless steel 1.4301 (AISI 304) Cooling jackets Tank side Tank outside diameters 820 mm Tank height 1660 mm Tank empty weight 80kg

BREADING MACHINE, TITAN INTERNATIONAL, TYPE: TPM 630 Technical description: Serial number: 871038 Material: Stainless steel Mesh widht: 630 mm Hopper load capacity: 208 Lt Power supply: 380-440 V / 50-60 Hz Dimensions: 1850 x 1000 x 2000 mm

CNC bending machine Type: Biegemaster BM 6,15 Manufacturer: Sperr & Lechner Year: 2016 The bending machine can bend sheets up to a thickness of 1.5 mm steel sheet, in the case of aluminum sheet the maximum thickness is 2 mm. The maximum length of the bent sheet is 6200mm and the width is 915mm. Machine in good condition, fully functional, under power Find more here - / Contact us at -

NEW ENGINE BOW THRUSTER MOTOR HYUNDAI NEW,

Key data: 1350 mm, 1

- Working width 1350 mm - Rubberized pressure rollers - Roller table at the inlet and outlet - Belt feed speed 2.5-13 m/min, infinitely adjustable, perforated belt (prepared for vacuum tensioning device by external, not included drive motor) - Combi-contact roller-grinding unit (15 kW), with electr link pressure bar (element width 25 mm), belt speed infinitely variable from 2.5 to 20 m/s, belt length/width 2150/1370 mm, belt blow-off device, sanding shoe rest in the machine, pneum. Abrasive belt tensioning device - 1 rotating workpiece cleaning brush (0.75 kW) on the outlet side of the machine - Paintwork: RAL 5018 - Total connected load approx. 22 kW (36 A) - Operating voltage: 400 V, 50 Hz Technical data subject to actual equipment The sale is carried out on behalf of the owner from the current location, in the condition as existing, excl. Warranty.

Blower/fan Buehler design GR 360 degrees 240 m³/min, 210 mm water column Power 11 kw V-belt drive Output 455 x 355 mm Suction 450 mm Good condition, test run in our specialist workshop

General SKU231Y132 MakeWam TypeDLP2035G Year of construction2010 Main Features Motor3 KW Inlet diameter100 mm Width350 mm Specified Features - Lump breaker MaterialStainless steel 1.4307 (304L) Lump breakercheck Double shaftcheck Teeth height50 mm With hoppercheck bag dumping station InletDN100 OutletDN350 with valve Motor3,0 kW (400 V, 1430 rpm) Rotor speed60 rpm Information LocationBarneveld Mounted on wheelscheck With switchcheck Floorspace1,30 x 1,25 m Total height1,70 mLump breakersNew arrivalsWamBreakers > Lump breakersNew arrivalsBrand > Wam What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

A Bekum injection blow molding machine without molds is available. Industry: pharmaceutical, product: plastic bottles, operating bottle volume: 10ml, production capacity: 10ml: approx. 4800pieces/h, materials: PE/PP, machine dimensions X/Y/Z: approx. 6250mm/2200mm/2200mm, weight: approx. 12000kg. The rotary drive of the rotary table appears to be worn out. The injection cylinder of the unit is leaking and further leakages are present. An on-site inspection is possible. Expected to be available from July 2026.

MANUFACTURER: Trepko TYPE: XPG 40 MOULDS: 200- 250 Gr Bricks CAPACITY: 80 pcs per minute DESCRIPTION: Trepko XPG 40 Butter forming and wrapping machine 250 gram butter bricks with capacity 4800 pcs per hour. APPLICATION: Butter, Margarine and similar high viscousity products. PRICE: Please contact Used butter machines for sale, used butter packing machines, used butter wrapping machine for sale, used butter form fill seal machine, trepko butter machine, benhil butte packing machine, margarine packing machine, butter foil wrapping machine, margarine foil wrapping machine, used dairy machinery for sale, used dairy equipment for sale, used dairy machines for sale,

BUCHI speeddigester digestion block K-425 + Scrubber K-415 BUCHI K415 Dimensions (L x W x H): 417 x 347 x 526 mm Weight: 12Kg BUCHI K425 (K-425) Speeddigester Mineralization Block With accessories and glassware (see photos) Year of Manufacture: 2016 and 2017 In excellent condition

Berief KIPPKO 1200L, For Sale: Berief KIPPKO 1200L Industrial Cooking Kettle, We are offering a Berief KIPPKO 1200L tilting cooking kettle for sale. The machine has been removed from production while fully operational and remains in clean, well-maintained, and good working condition., This industrial kettle is designed for large-scale food processing and is ideal for producing soups, sauces, ready meals, vegetables, meat products, and other liquid or semi-liquid foods., Technical Specifications:, - Manufacturer: Berief, - Model: KIPPKO 1200L, - Capacity: 1,200 liters (gross volume), - Material: Stainless steel (food-grade), - Heating system: Double jacket, indirect steam heating, - Steam pressure (jacket): approx. 3 bar, - Maximum temperature: approx. 140°C, - Tilting system: Hydraulic tilting kettle, - Mixing system: Horizontal multi-arm agitator with wall scrapers, - Control: PLC syst ...

Size: 380 mm Equipments: cold glue, Exhaust, Paper mill max.lenght 380mm; max.thikness 40mm; max.hight 350mm; with mill and vacuum device

General SKU283U516 MakeRuberg-Mischtechnik KG (Amixon) TypeVM1500 No.VM1500/1639 Year of construction2000 LocationBarneveld Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume1500 Ltr. Motor22 KW Specified Features - Ribbon blender Ribbon blendercheck Capacity1932Ltr. Useful capacity1500Ltr. Trough sizesDia: 1350x1350mm InletDia: 300mm, 80mm Manhole485x1000mm OutletDia: 200mm Interrupted ribboncheck Max. temperature40°C Motor22kW, 400Volt, 1465rpm Speed mixing shaft28 rpm MaterialStainless steel 1.4571 (316Ti) Information Floor space2,1x1,6m Total height2,1m Weight2400kgRibbon blendersTea, herbs & coffeeRuberg Mischtechnik KGMixers > Ribbon blendersIndustries > Food & Feed > Tea, herbs & coffeeBrand > Ruberg Mischtechnik KG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price  ...

consisting of: frame shelf, loading magazine: 15-fold, max. loading length: 6,000 mm, automatic feeder, bending unit, power: 3.87 kVA, dead weight: 2,530 kg, with separate control unit, type: MBF372, switch/control cabinet system with cooling unit, Fabr. RITTAL

Heating block / mineralizer BLOC DIGEST 12 + RAT 2 SELECTA control unit Reference: BLOC DIGEST 12 digestion unit For 12 samples Automatic Precision Dry Bath Thermostat for 12 Reaction Samples, 45°C to 450°C RAT 2 control unit for standardized COD mineralizer With: 18 digestion tubes With smoke collector (be careful, 2 of them are chipped) In excellent condition

Used Fully Automatic Glass Jar Packaging System With Carton Forming Machine (Wrap Trays) In addition to packing products of the same type in cartons, it is also possible to automatically mix products sold offline. (Conveyor belt feeding for mixed cartons). The line includes: – Buhmann cartoning machine type C300, weight 1200 kg. – Buhmann packer type PF 800, weight 7500 kg. Performance: Online product launch – max. 280 jars/min Mixing Type A – 140 jars/min Mixing type B – 140 jars/min Total capacity (online,A,B) max.300 jars/min Cartoning machine for forming cartons and applying lids – 23.5 cartons/min Year of construction: 2016 Working hours: 5000h

Bag filling and sealing machine Rianta PS Mako BFS 300 Year of Make: 2020 Condition: cleaned & tested Suitable for 2-core paper or plastic clip tape, 8mm wide, wire diameter. 0.6-0.8mm Capacity: 35 packs/min (depending on product) Max. product dimensions (LxWxH): 450 x 230 x 140 mm Air blower to open the bags Date Printer Incl. inclined conveyor belt, type: SF 1500

Offer 26077 Technical data approx.: - Control for fully automatic workflow - ( feed , incision speed. Replenishment machine, etc. ) - In a separate control panel - Cutting range at 90° around 260 mm - flat 300 x 260 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Remnant length automatic operation / manual approx. 130 / 40 mm - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely variable 20 - 140 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 8.0 kW - Space requirement approx. W 2700 x H 1600 x D 2450 mm - Weight approx. 1800 kg - Roller conveyor 1000 mm

General SKU413X1254 MakeVirba LocationBarneveld TypeVSK 14,7-10-10/7,5-II Main Features MaterialStainless steel Motor0.9 KW Surface2.06 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface2,06 m² Bed sizes2750 x 750 mm Product inletø 150 mm Product outlet2x ø 200 mm Number of sections:1 Air inletø 250 mm Air outletø 400 mm Vibro motorcheck 2x Motor2x 0,90 kW, 400 V, 965 rpm MaterialStainless steel 1.4301 (304) Information No.33482 Year of construction1997 Mounted on mild steel framecheck Floorspace3,70x1,40 m Total height2,25 mFluid bed dryers continuousNew arrivalsVibraDryers > Fluid bed dryers continuousNew arrivalsBrand > Vibra What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ma ...

Big Bag, 1-place holding structure, complete with supporting hooks, Constructed in solid, painted carbon steel, single place, Machine reconditioned

Key data: 230 mm

suitable for mitre cuts on one side Cutting area at 90° round 230 mm, flat 280x150 mm at 60° round 133 mm, flat 130x90 mm Cutting speed 40 + 80 m/min incl. Hydraulic material feed Chip clearing brush, coolant device, roller conveyor piece

Used transfer machine from Baader Linco. The device automatically transfers birds from the slaughter line to the evisceration line. Birds are released from the slaughter line by cutting off their legs with a built-in cutting unit and re-suspended at the ankle joint on the eviscerating line.

Offer 24407 Technical data: - 2 motor-driven rollers - Hydraulic. Feed of the upper roll Pressure capacity 18 t - Shaft diameter 60 mm - Shaft rotation 6 rpm - Roller diameter 215 mm - Bending performance - flat steel R 300 upright 80 x 15 mm - R 300 flat 120 x 25 mm - Square R 300 50 mm - Round tube R 900 100 x 2 mm - Drive 400 V / 1.5 kW - with: - separate control panel with digital display + foot switch - right / left – run - Lateral straightening rollers - Standard bending kit for flat and angle material - Weight approx. 1200 kg - Space requirement approx. W 1000 x H 1750 x D 1250 mm

We are selling a BAUER 400 baler Technical specifications: Recycling press installation Manufacturer: BAUER Model: 401 Year of manufacture: 1994 Power: 22 kW Pressing force: 40-50 t Dimensions: 10300 x 2000 x 3000 mm Tipping weight: ~400 kg PRICE ON REQUEST! ----- Wir verkaufen Ballenpresse BAUER 400 Technische Daten: Installation der Sekundärrohstoffpresse Hersteller BAUER Modell 401 Produktionsjahr 1994 Leistung 22kW Druckkraft 40-50 t Die Abmessungen der Presse betragen 10300 x 2000 x 3000 mm Kippen Gewicht ~ 400 kg PREIS BEI ANFRAGE!

New BEL M314Ai Laboratory Balance - 310g - 0.1mg New equipment in its original packaging Technical Parameters: Precision Balance Reference M314Ai Legibility: 0.1 mg (10-4 g) Maximum capacity: 310 g Repeatability: 0.1 mg Linearity: 0.3 mg Response time of less than 4 seconds Dimensions of the top: diameter 80 mm Chamber dimensions (W x D x H): 162 x 171 x 225mm Net weight approx. 6.6 kg Scale dimensions (W x D x H): 215 x 345 x 345 mm

New BEL M124A Laboratory Balance - 120g - 0.1mg New equipment in its original packaging Technical Parameters: Precision balance reference M124A Legibility: 0.1 mg (10-4 g) Maximum capacity: 120 g Repeatability: 0.1 mg Linearity: 0.3 mg Dimensions of the top: diameter 80 mm Chamber dimensions (W x D x H): 162 x 171 x 225mm Net weight approx. 6.3 kg Scale dimensions (W x D x H): 215 x 345 x 345 mm