man b used for sale

Stripe breaking device IMA

Polishing machine Brand: BAUERRICHTER Type: SL1 1350X3500 table size: 1400x4000mm work area: 1350x3500mm Note: The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.

Section bending tools included: tubedia 50 mm amp; 80 mm Number of rolls: 3 rolls Roll capacity cold: 2550 x 15 mm Profile bending machine: yes Pre-bending : yes

Machine data: Press force: 3,000kN Roller diameter: 850mm Working width: 400mm Briquette dimension: 38 x 32 x 16mm Briquette volume with 4mm gap: approx. 16cm³ Briquette weight: approx. 38g Throughput capacity: 30,000kg/h Rated speed: 17.9/min Circumferential speed: 0.79m/s

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD Heating surface approx. : 20 m² Power max. : 1.000 kg/h Operating overpressure : 13 bar Increased test overpressure : 23.4 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 1994 1 pipe reactive law equipped with Weishaupt oil burner, control cabinet, feed water pump, and the existing coarse and fine fittings

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD Heating surface approx. : 20 m² Power max. : 1.000 kg/h Operating overpressure : 10 bar Increased test overpressure : 18.5 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 1991 equipped with Weishaupt oil burner, control cabinet, feed water pump, and the existing coarse and fine fittings

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 13.0 bar Increased test overpressure : 24.05 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of manufacture : 2003 CE mark : 0036 equipped with Weishaupt gas burner type G7/1-D, ZMD-LN, 250-1,550 kW, 15-500 mbar, gas control section, control cabinet, feed water pump and the existing coarse and fine fittings. Econmizer: Eco 3, 82 kw, 31 bar, 238°C, 28 ltr.

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 13 bar Increased test overpressure : 23 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of manufacture : 2003 CE mark : 0036 equipped with Weishaupt gas burner G7/1-D, ZMD, 300-1,750 kW, 15-500 mbar, Gas control section, control cabinet, feed water pump and the existing coarse and fine fittings.

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 13 bar Increased test overpressure : 23.4 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 2000 equipped with Weishaupt gas burner type G7/1-D, ZMD, 300-1,750 kW, Gas control section, control cabinet, feed water pump and the existing coarse and fine fittings.

1 gebr. Boiler --------------------------- Make : LOOS; Gunzenhausen Type : U-HD Heating surface approx. : 31 m² Power max. : 2.000 kg/h most permissible. Operating overpressure : 10 bar Increased test pressure : 18 bar Water content at NW approx. : 1.740 l Water content full approx. : 2.480 l Year of construction : 1999 equipped with Weishaupt gas burner, gas control system, Control cabinet, feed water pump, water level sight glass, steam and safety valve and the existing coarse and fine fittings

1 gebr. Boiler ---------------------------------- - mounted on frames - Manufacturer : Jumey Heating surface approx. Taxi: 40 m² Capacity : 2,000 kg/h Operating overpressure max. : 10.0 bar Previously operated with : 5.0 bar Water capacity at NW approx. : 3,540 l Water content full approx. : 4.750 l Year of construction : 1994 equipped with Weishaupt gas burner, gas control system, Control cabinet, feed water pump, and the existing coarse and fine fittings.

Manufacturer: Bürkle Transportband, Working length mm: 4900, Working widht mm: 1300, Total hight mm: 910, Frequency converter: möglich, Total hight mm: 910, Engine power kW: 0,75, Feeding speed min-max m/min: 8-30,

Manufacturer: Pankoke und Kochsiek, Type: BFA 03, Year: 1988, Drilling supprt from bottom: 3, Groove saw: 1x Horizontal<CRLF>1x Vertikal, Year :1988

Manufacturer: Biesse, Type: Selco EB 108, Year: 2008, Program: Selco Optiplaning, Optimisation: Selco Osi Plus, Max plate format mm: 4200 X 2200, Saw blade protrusion: 107, Cutting lenght mm: 4200, Working hight mm: 95, Vorschub Sägewagen : 100, Network-capable: yes, Angle pressure fixture: yes, Saw Blade Diameter mm: 400, Säge verstellbar über Steuerung: yes, Number of clamping tools: 9, Main motor kW: 13,5, Feeding speed continous adjustable: yes, Feeding from front side: yes, Feeding speed continous adjustable: yes, Year :2008

Manufacturer: Bürkle Transportband, Working length mm: 2100, Working widht mm: 1370, Total hight mm: 900, Belt width: 1370, Own controller: no, Engine power kW: 0,5,

Manufacturer: Bürkle Transpportband, Year: ca 2000, Working length mm: 2500, Working widht mm: 1450, Total hight mm: 900, Belt width: 1450, Own controller: no, Year :ca 2000

Manufacturer: 4 Stück Spehoma Transportbänder ca. 4500 mm 600 mm, Type: Transportband, Year: ca. 2000, Control: hand, Working length mm: ca.4000, Working widht mm: 600, UV-Band: 950 Verstellbar, Total hight mm: 1,5, UV conveyor belt: 8-20, Frequency converter: yes, Own controller: no, Bandsteuerung : yes, Year :ca. 2000

Manufacturer: Busch Schleifbürste Rotationschleifbürste, Type: Robatech 1300, Year: 2014, Control: Siemens, Software: Busch, Monting of the machine: 1 Schleifbürstenband, Number of units: 1, Working widht mm: 130, Through running hight max mm: 0-80, Number of rotations controlled: 30-140 m/min, Units mounted upright: Rotation 360 Grad, Fast exchange device: Bürstenbesätze, Through running hight max mm: 0-80, kW output motor: 5,5 Bürste/, Feeding speed continous adjustable: 4-12, Weight approx. kg: 3500, Required space L x W x H mm: 3840 X2400 X2000, Year :2014

Manufacturer: Bütfering AWS, Type: AWS 1100, Year: 1981, Monting of the machine: Kombiaggregat, Sanding width mm: 1100, Sanding hight mm: 120, Sanding belt dimensions: 1900 X 1150, Längsschleifaggregate: Kombi/Bürste, Band 1 Leistung kW : ca.10, Combi unit roller/shoe: yes, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: 0,5, Constant table hight: no, Year :1981

Manufacturer: MB Busch, Type: Robatech 1300, Year: 2002, Control: Siemens, Monting of the machine: Kettenbürstenschleifsystem, Number of units: 1 Rotierend, Working widht mm: 1300, Through running hight max mm: 150, Diameter of brushes: Einschubbürsten, Fast exchange device: Bürsten, Through running hight max mm: 150, Vacuum belt: yes, Feeding speed continous adjustable: yes, Dust removal brush: yes, Weight approx. kg: ca.2000, Required space L x W x H mm: 3000 X 2000, Workpiece clamping technology: Vakuum, Year :2002

Manufacturer: Weeke BHH 40 Durchlaufbohrmaschine, Type: BHH 40, Control: Woodwoob, Work piece width min-max mm: 30-800, Min.-max. workpiece length in mm: 250-2200, Min.-max. workpiece height in mm: 12-50, Automatisches Rüsten: yes, Automatic width adjustment: yes, Dowel tools Qty: 4, Dovel diameter mm: 8 X 30, Dovel lenght mm: 30, Min - max dowel centre-to-centre distance mm: 32, Schwingförderer Rohre : 4, Drilling support horizontal: 2, Working range max mm: max.60, Dovel units: 6, Work piece refeeding: yes,

Manufacturer: Bürkle , Type: Tansportband, Working length mm: 2500, Working widht mm: 1300, Total hight mm: 980, Belt width: 1300, Own controller: no, Engine power kW: ca.0,5, Feeding speed min-max m/min: 10-30, Feeding speed continous adjustable: über Regler möglich, Working hight adjustable mm: yes, Movable: no,

Manufacturer: Bürkle UV Transportband, Type: ca.2005, Working length mm: 2630, Working widht mm: 1300, UV-Band: yes, Total hight mm: 890 +-, Bandsteuerung : yes, Engine power kW: ca.0,5, Feeding speed min-max m/min: 6-30, Feeding speed continous adjustable: über Umrichter möglich,

Manufacturer: Bürkle Transportband, Year: 2002, Working length mm: 3000, Working widht mm: 1400, UV-Band: no, Belt width: 1420, Own controller: no, Bandsteuerung : no, Engine power kW: 0,5, Feeding speed min-max m/min: 6-30, elektronisch regelbar: möglich, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Year :2002

Manufacturer: Biesse Selco, Type: EBT 120, Year: 2008, Bench top saw: 4400x2200, Work piece length min-max mm: 4400, Work piece width min-max mm: 2200, Saw blade protrusion: 122, Vorschub Sägewagen : 1-150, Min-max feed programming slider m/min: 100, Saw Blade Diameter mm: 430, Main motor kW: 15, Feeding speed continous adjustable: yes, Scoring Aggregate : 2,2 kW, Work piece length min-max mm: 4400, Work piece width min-max mm: 2200, Feeding speed continous adjustable: yes, Year :2008

Manufacturer: Bürkle, Type: Bürste, Working widht max mm: 1300, Diameter of brushes: 150,

Manufacturer: Gottschild, Type: BSD 2000, Year: 2004, Control: Siemens, Monting of the machine: 5 Tellerbürsten, Number of units: 5, Working widht mm: 650, Through running hight max mm: 40, Diameter of brushes: ca.300, Cross-brushing unit: yes, Fast exchange device: yes, Through running hight max mm: 40, kW output motor: ca.1,5, Vacuum belt: yes, Feeding speed continous adjustable: yes, Year :2004

Manufacturer: Pankoke und Kochsiek, Type: BFA-03, Control: hand, Program-controlled: no, Min.-max. workpiece length in mm: 22,5, Min.-max. workpiece height in mm: 0,75, Program: 40, Drilling beam swivel-mounted: no, Lochraster: yes, Drilling engine kW: yes, Working range max mm: yes, Drilling support horizontal: 2, Dovel insertion: inkl. Magazinaufstapel Magazin und Hauptsäge und Nutsäge,

Manufacturer: Weeke, Type: BST 50, Year: 1992, Program-controlled: yes, Work piece width min-max mm: 100-1050, Min.-max. workpiece length in mm: 350-2600, Min.-max. workpiece height in mm: 10-60, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 60, Drilling support horizontal: 2, Drilling supprt from bottom: 6, Drill support from top: keine, FREE TEXT: inkl Bohrhetriebe, Year :1992

Manufacturer: Brandt , Type: KD 79/2 CF, Year: 2002, Min-max edge material mm: 0,5-3,0, Min-max feed m/min: 18, Axis control: no, Premilling: yes, Fine milling: yes, Application of separation agent: no, IR zone: no, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Work piece refeeding: yes, Year :2002

Manufacturer: Bürstenschleifmaschine, Type: 250 mm, Number of units: 2, Working widht mm: 250 , Diameter of brushes: 280, Units mounted upright: yes, Fast exchange device: yes, kW output motor: 1,5,

Manufacturer: Hymmen, Type: BVK, Year: 1995, Work piece width min-max mm: 1350, Number of brushes: 2, Brushes inclinedt: 2, Working hight mm: ca 980, Year :1995

Manufacturer: Hymmen, Type: BVK, Year: 1995, Work piece width min-max mm: 1350, Min.-max. workpiece height in mm: 3 - 120, Purpose: Beizvertreiben, Number of brushes: 2, Brushes inclinedt: 2, Diameter of brushes: 150, Power per brush kW: 0,75, rotations controlled: 150-750, Feeding speed min-max m/min: 5-20, Vaccum conveyor belt: yes, FREE TEXT: Maschine bekommt neuen Schaltschrank und die Bürstengeschwindikkeit wird Drehzahl geregelt, Year :1995

Manufacturer: Giradina, Type: Bürste, Year: 2005, Monting of the machine: Bürstenaggregat, Number of units: 1, Working widht mm: 1300, Through running hight max mm: 60, Diameter of brushes: 300, Number of rotations controlled: no, Fast exchange device: yes, Through running hight max mm: 60, kW output motor: ca.1,5, FREE TEXT: Maschine ohne Welle/, Year :2005

Manufacturer: Protool, Type: Bohrm. DRP 8 E, Drilling engine kW: 0,460, FREE TEXT: mit Ständer,

Manufacturer: Bürkle Vertreibetstationen, Type: VBS, Work piece width min-max mm: 400, Number of brushes: 2, Brushes straight: yes, Working hight mm: 10-200, Power per brush kW: 0,5, rotations controlled: regelbar, Feeding speed min-max m/min: ca.8-15, Vaccum conveyor belt: no, FREE TEXT: Bürstenträger sind nicht dabei/Transportbandlänge 1600 mm,

Manufacturer: Brandt, Type: KS 23, Year: 1988, Min-max edge material mm: 0,5-12, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 55, Min-max feed m/min: 12, Premilling: no, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Corner tracing type: no, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Edge sanding: yes, Year :1988

Manufacturer: Tillecke Bürsten schleifmaschine, Year: ca.1980, Monting of the machine: 1 Bürstenaggregat, Number of units: 1, Working widht mm: 1300, Through running hight max mm: ca 80, Diameter of brushes: 200, Number of rotations controlled: yes, Units mounted upright: yes, Through running hight max mm: ca 80, Axle-diameter: ca.50, kW output motor: ca.2, Vacuum belt: Haftteppich, Feeding speed continous adjustable: 8-15, FREE TEXT: Flextrim Schleifbürstenbesatz, Year :ca.1980

Manufacturer: Bargstedt, Type: Transportband, Year: ca1995, Control: hand, Working length mm: 6500, Working widht mm: 800, Total hight mm: 950 Verstellbar, Engine power kW: 1,5, Feeding speed max m/min: 8-20, Feeding speed continous adjustable: yes, Belt control: no, Working hight adjustable mm: yes, Year :ca1995

Manufacturer: Brandt, Type: KD 99, Year: 1998, Control: Homatic, Min-max edge material mm: 0,4 - 3,0, Work piece width min-max mm: 62, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 60, Edgeband height max mm: 62, Premilling: yes, Bevel milling: yes, Corner tracing type: yes, 4 Motoren: yes, Nuten : yes, Radius scraper: yes, 4 Motoren: yes, Compressed air bar: 6, Machine lenght mm: 8740, Noise enclosure: yes, Rückführung Typ: yes, machine ready for demonstration: yes, Year :1998

Manufacturer: Brandt , Type: KS 25, Year: 1991, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 55, Min-max feed m/min: 14, Premilling: no, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Flat scraper: yes, Bonding part EVA: yes, Top pressure belt/roller: Rolle, Werkstückunterstützung: yes, Freiplätze: keine, Year :1991

Manufacturer: Koch , Type: BLG, Year: 1992, Control: hand, Program-controlled: yes, Software: 300, Work piece width min-max mm: 200-2500, Min.-max. workpiece length in mm: 10-60, Program: yes, Lochraster: alle 2, Drilling engine kW: 60/80, Working range max mm: 2 von hinten, Drilling supprt from bottom: 2, Drill supports from behind: 7, Work piece refeeding: yes, Taktleitung min: 1, Dovel insertion: yes, Overhauled on: alle Bohrgetriebe drehbar 360 Grad, Year :1992

Manufacturer: Bodenförderband, Year: ca.1980, Working length mm: 35.000, Working widht mm: 1200, Total hight mm: ca 100, Year :ca.1980

Manufacturer: Bütfering, Type: Profiline SCR/RRR, Year: 2007, Sanding width mm: 1350, Sanding hight mm: 3-160, Number of sanding belts: 3, Sanding belt dimensions: 13702620, Rollers: 3, Rubber roller: 1, Steel roller: 2, Shore roller 1: 70 , Bürstenaggregate: 1, Band 1 Leistung kW : 37, Band 2 Leistung kW : 30 , Band 3 Leistung kW : 22, Continous adjustable feeding speed m/min: 4-20, Transportbandantrieb kW: 7, Constant table hight: yes, Vacuum table: yes, Weight in kg: ca. 2020, Year :2007

Manufacturer: Bauerrichter, Type: WRM 4 / S-E, Year: 1997, Number of units: 4, Working widht mm: 800, Through running hight max mm: 60, Diameter of brushes: 400, Number of rotations controlled: 250 - 2500 U/min, Units mounted inclined: 4, Fast exchange device: yes, Through running hight max mm: 60, Polishing width mm: 800, Engine power - kW: 4x 4 kW, Vacuum belt: yes, Exhaust diameter mm: 2 x 200, FREE TEXT: mit Oszillation, Year :1997

Manufacturer: Bütfering, Type: Vega 213 CE, Year: ca.1995, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: ca.2120 X 1350, Table hight adjustment by engine: yes, Rollers: 1, Rubber roller: yes, Band 1 Leistung kW : 12 gleich und gegenlauf, Band 2 Kombiaggregat Walze/Schuh: 15, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 6-20, Feeding engine kw: 1,2, Intermediate sanding of lacquer: no, Vacuum table: yes, Segment sanding shoe: yes, Bürstaggregat : yes, Durchmesser/ Bürstenbesatz: 125, Year :ca.1995

Manufacturer: Biesse , Type: Stream B1 S3, Year: 2005, Control: NC 1600, Min-max edge material mm: 20, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 60, Min-max feed m/min: 25, Min.-max. batten magazine mm: 20, Bevel milling: yes, radius milling: yes, Radius scraper: yes, Buffing unit: yes, Year :2005

Manufacturer: Brünninghaus Kartonverklebeautomat, Type: XL.46 PA, Year: 1996, Control: hand, Carton size min. L x W x H mm: 120 X 120 X 150, Box dimensions max. L x W x H mm: 650 X 640, Year :1996

Manufacturer: Boere , Type: BKS 900 / BBBg20/2, Year: 1985 / 1991, Monting of the machine: Walze Schuh + Walze/Schuh/Bürste, Double sided sanding line: yes, Sanding width mm: 900, Sanding hight mm: 150, Number of sanding belts: 4, Continous adjustable feeding speed m/min: 5 - 25, Rubber roller: yes, Shoe unit: yes, Shoe unit: yes, Schleifbänder unten: 2, Brushing unit: yes, Year :1985 / 1991

HBM Wotan WMO B105, CNC control system Siemens 820M