We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,301 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Manufacturer: MAN GHH Power supply: 400 V / 50 Hz Power capacity: 500 kg Lifter for cutter trolleys 200 L Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
used
1 factory-tested ceiling crane girder Lifting capacity 3000 kg Wingspan approx. 6,800 mm Hook way approx. 8,000 mm Make MAN GHH Year of production/workshop testing 1988/2016 equipped monorail trolleys, short type, freely movable floor control Working speeds: Hoist around 0.8/8.0 m / min Trolley gear approx. 4.0/16.0 m / min Crane chassis approx. 8.0/32.0 m / min
used
2 factory-tested, well preserved double girder cranes Load capacity 5000 kg Wingspan approx. 13.630 mm Hook way approx. 4,000 mm Fabrikat MAN-SWF Year of production/workshop test 1995/2016 Cranes, floor control, freely movable equipped with SWF double girder trolleys, travels to the lower straps of the crane bridges Working speeds: Hoist approx. 0.8/5.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min
used
2 factory-tested, well-preserved single girder suspension cranes Payload 10.000 kg Gauge approximately 17,700 mm Lifting height Max approx. 9,300 mm Make MAN / SWF Year of construction/workshop test 1987 1990/2016 Service life approx. 3 years with SWF monorail trolleys short type, long travel rate programs, freely movable floor control Working speeds: Hoist CA. 0,8/8 m / min Trolley gear approx. 20 m / min Crane chassis approx. 40 m / min
used
4 factory-tested, very well preserved double girder cranes Load approx. 20.000 kg Wingspan approx. 16.650 mm Hook path about 5.000 mm Fabrikat MAN/SWF Year of production/workshop test 1995/2016 Cranes equipped with SWF double girder trolleys with reduced design to minimize the installation height, freely movable floor control Working speeds: Hoist approximately 0.32/3.2 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min
used
; Mileage [km]: 6; Power [PS]: 5; Engine: MAN NEW ENGINES
used
MAN D 2866 LUH 24
new
Outdated MAN E2876LE302 bio gas engine in Exchange.
used
MAN D 2066 LF 12 - Euro 4-287 KW - 390 HP Motor was cpl. repaired according to RAL GZ-797: with new piston rings, new bearings, new oil pump, AT cam shaft, AT injectors, new water pump, oil and fuel filters 1 year warranty without KM-limit Old Engine must be returned
used
MAN D 2066 LF 31 - Euro 4-324 KW - 440 HP Motor was cpl. repaired according to RAL GZ-797: with new cylinder liners, Pistons, bearings, turbochargers, air compressor, injectors, high pressure pump - without starter, alternator and clutch Repair enabled old part must be returned. Maximum mortgage of old part of 4.000,00 = €
used
MAN D 2876 LF 13 - Euro 4-390 KW - 530 HP Motor was cpl. repaired according to RAL GZ-797: with new pistons and liners, new bearings, new oil pump, AT cam shaft, AT injectors, new water pump, oil and fuel filters 1 year warranty without KM-limit Bauglieches old part must be returned
used
DEAR'S SALE, ALPHA MAN L&V 28/32 COMPLETE ENGINE & SPARE PARTS 12V CRANKSAFT STD 6L CRANKSAFT STD LINER, PISTON, FULL COVER, CONROD... ANY PARTS Brgds info@kscege.com
Dear's Sale, Man B&W 16/24 spare parts; Full cover, liner, pumps, conrod, crank&block(5cyl) piston, etc Best Regards info@kscege.com
used
Dear's Sale, Man B&W 40/45 engine parts Piston head full.. 2 pcs Liner 2 pcs valves etc Ready for transport Best Regards Hakan KUSCU info@kscege.com
used
Cylinder heads for MAN 28/32 A-H for sale, Info by request Part no: 1.1616-03-E0
used
MAN head, for engine 28/32 REVISED
used
Key data: 16230
16MW MAN TURBO back pressure turbine for sale. Model: MARC4 B-00 Year: 2008 Hours: 60,145 Capacity: 16,230 kW Hz: 50 Scope of supply: Steam turbine, Gearbox, Generator, Lubrication oil system, Control oil system, Instrumentation and control system. General Information The turbine is well preserved. Additional info: Steam and cooling system piping not included. Service History Status: All required maintenance carried out in compliance with the operating manuals. There is a leaking sealing at the connection. Cost of repair is estimated to be below €50,000. No further defects are known at this moment. The last revision planned in 2018 was not carried out due to decommissioning. Most likely it will need a major overhaul. Available for Sale. Price: Please apply
used
7.2MW diesel power plant. This vintage power plant has been used as an emergency generating sets for a larger R&D center in Korea, a very short actual running hours (abt. 2000~3000hrs) and has been well maintained, so our company can confidently recommend this power plant to anyone who needs it. The plant was dismantled and has been now stored in our factory and will be delivered to the buyer after the performance verification test of the generating sets at our test shop. Main Specifications - Engine Model: SSANGYONG-MAN 18V28/32H x 2 Sets - Manufactured & Running Hours: in 1999 & abt. 2000~3000hrs - Continuous Output: 3600kW x 720 rpm - Frequency & Voltage: 60Hz & 6600V - Fuel Oil: Diesel Oil / Heavy Fuel Oil - Plant Auxiliary Equipment: 1 set
new
Qty. 40 Second-hand diesel generator sets – never installed Type: HFO, LDO fired Generator Sets 8.7 MW each, 50 HZ Mfc.: MAN Built: 2010 Upgrated & Refurbished: 2015/17/18 Alternator new : 2017-2020 Controls: 2020 Condition: Excellent, preserved by OEM continuously and stored in Warehouse based on preservation contract Running hours: 0 hrs Guarantee: 18 month from shipping date or 12 months from commissioning date!
new
TO WHOM IT MAY CONCERN; WE VE NEW UNUSED GENUINE SPARE PARTS OF MAN TURBO NR 34S AT OUR STOCK. NEW SET OF SPARE PARTS 1159500-0138 2PCS NEW SET OF SPARE PARTS 1191468 1PCS NEW BEARING BUSH 1191468 7PCS NEW BEARING BUSH 1151768-0442 1PCS NEW NOOZLE RING IMO 2475 128.05cm3 2PCS NEW LABYRINTH RING 1191468 2PCS NEW LOCATING BEARING 1191468 2PCS NEW LOCATING BEARING 517002 1PCS ALL PARTS EX STOCK LOCATED AT IZMIR TURKEY. IF YOU VE ANY QUESTIONS . PLS DO NOT HESITATE TO CONTACT WITH US .
used
TWO PCS MAN 2842 LE 401 - REBUILD 2019 - 0 HOURS AFTER COMPLETE OVERHAUL
used
Generator set MAN 315VA 7mpm39i2n Type D2866LXE 310 kW with control cabinet
new
Original MAN valve New! ---------------------------------------------------------------------- ---------- Note: We also have various RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
new
Original MAN valve New! ---------------------------------------------------------------------- ---------- Note: We also have various RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
used
New, original cylinder liners MAN B&W never used for 50MC engine
used
Unused cylinder liners, never used MAN B&W
Make:Man Type: NA 34 Four Inlet Marking: 181228 56746 8114 (CO2) VO N88 NV MCN 241
used
Gas Engine Generator Set (CHP/BHKW) MAN for natural gas Model E2866E 95 kWe Spec number 524806 Serial number 27093890484901 Stamford generator UC1274E2 400V/50Hz, 140 KVa 202 Amp year 2000 Serial number 0117910/02 Scope of delivery: - Generator set - Control panel
used
MAN 9L32/40 complete engine 3 pieces available Each engine 4320 Kw at 720 Rpm Also able to sell crankshaft / spare parts or the cylinder block please contact: info@fin-marine
used
MAN NR34/S026 turbines 1 new and 3 used available New bearings and repair sets also available in our stock in Istanbul Please contact: info@fin-marine
used
Steel construction - mezzanine, 500kg/m2, floor area approx. 6.440 m2 - used - : Special price ex location: only 350.000.- € (net), incl. disassembly, etc.! Manufacturer: Pro Man Type: Mezzanine Year of construction: 2007 stage load: 500kg/m2 Floor height (upper edge floor covering): 3.462mm Bottom Edge Carrier: 3.230mm Footprint: approx. 92,000 x 70,000mm Stage covering partly chipboard (38mm), partly gratings Accessories: stairs, railings, pallet transfer places, Bottom edge chipboard: white Plan of the stage as PDF on request Condition: very good Available: from about March 2022 Location: CZ
used
MAN B&W 58/64 CYLINDER HEADS , OVERHAULED READY TO INSTALL PISTONS, FUEL PUMPS, CONNECTING RODS, CYLINDER LINERS AVAILABLE. TC ( NA48 SM1013)
used
CNC stop make de man type AST-1/0 / MSR 3Year 1995Support length: 3000 mmPad width: 200 mmWorking height: 800 - 1000 mmFeed rate: 22 m / minDrive power: 120 WWith- PC control MSR 3 with max. 1000 sentencesvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
MAN Heat exchanger, for engine 28/32 Part number: 76613
used
MAN oil pump, for engine 28/32 Part number: 6100565
used
MAN water pump, for engine 28/32 Part number: SH6B17
Dear's Sale, used 1 engine MAN 42 COVER Brgds Hakan KUSCU +905323642509
Dear's Sale, used 3 engine MAN 16/24 Layner, piston, conrod ,fuel pomp, air cooler, etc. Brgds Hakan KUSCU +905323642509
used
Qty. 1 Second-hand paper mill Mfc.: VOITH, Mitsubishi, Johnson, MAN Turbo, Reitz, Quattroll Built: 2005, 2006 Type of Head Box Masterjet F with Modulejet No. of Top Former: Voith Duo-d Pond Width: 3,700 mm Wire Width: 3,850 mm Max. Sheet Width: 3,363 mm on Reel Type of size Press: Metering Size Press Speed Sizer” Voith Dryer Section: Pre Dryer Cylinder 30 pcs After Dryer Cylinder 8 pcs Paper Grade: Printing & Writing Paper Basic Weight: 60 ~ 260 gsm (main 70~120 gsm) Max. OP Speed: 800 m/min at 80 gsm Product capacity: Avg. 271 ton/day at 80 gsm
used
MAN 16V32/40 Crankshaft 2 Pieces available in our stock in Istanbul Turkey Crankshaft is in good condition STD size Tests are done for: Measurement Hardness Crack Bending For more information please contact with us: info@fin-marine
used
Man Roland R204 in a very good condition. 110 mil , format 74x56
used
3 Nos. 12.35 MW each MAN B&W (1999) make HFO fired generator sets, available for sale with IMMEDIATE Delivery. The above generator sets are in excellent condition and can be inspected on foundation. These generator sets have been operated for a total of 35000 hours and for only around 8000-10000 hours after last overhauling.
used
Available in stock 1 x Used Fitting and removing device for cylinder liner. The tool was used for MAN engines. The tool is used but in good working conditions.
used
Available in stock 1 x Used Fitting and removing device for injectors. The tool was used for MAN engines. Tool in good working conditions.
used
Engine: MAN D2858 Power: 115 kVA Generator: AEG IKB 55/240-4 Year built: 1972 Operating hours: Only 200 because only ran in emergency power mode Control cabinet has been renewed After disassembly, a test run was carried out. Subject to prior sale - errors possible Internal reference number: E-1004-46
used
MAN 18V28/32S and H, HFO generator complete with auxiliary equipment. Rated power output : 3825KW - 4079KW, Year : 1997-2004, 10.5KV 50 Hz. Qty : 1- 6 units, buying any qty is welcome Good for mining project
used
Container 2,9 x 9,0 meter, gaskooler, gasheaterr, aktiv carbonlfilter, intercooler radiator silencer, ventilation olietanke, exhaurst heat exchanger, gasstring, Gas booster, panelboar and curkitbreaker, • Brand og model; MAN E2876 •Power; 220kW •Heat; Eksos 139kW. Vann 103kW • Year; 2015 • Running hours; ca 30.000 • Hours since last ouverhaul) ca 7000 • Compleat unit Plug and run • Spareparts extra turbocharger.startmotor filters and other parts. I have this unit on stock 50000 euro ready to load
used
; Gross weight [kg]: 9000; Engine: MAN D2840LE; Accessories: Drip pan, Switching panel, Volt meter, Ampere meter, Hertz meter, Start battery, Exhaust system; Power type: 4000002
used
We offer a generator set MAN 2842 LE with control cabinet and other attachments Engine Model: D2842LE Engine number: 49366251184101 Power: 380 kW / 1500 1/min Year built:1991 Generator 400 kva / 50hz Generator operating hours: 78.26 h / Running hours generator: 78.26 h Further information according to nameplates / more details see type plates Verkauf nur als Set / Sale only as a Set
used
Reference Num.: 4028 Brand: MAN Roland Type: R 104 T 01 Construction year: 1994 Impressions: 45 mio Size: 480 x 660 mm Available: directly Status: Not in production Location: Deutschland Sheet size: min 210 x 280 mm, max 480 x 660 mm Printing speed: max 13,000 sheets/hour Printing units: 4 Machine size: Length: 4,271 mm, Width: 2,740 mm, Height: 1,865 mm Total weight: kg 1,171 / lbs 2,582 Equipment: - RCI - Rolandmatic - WEKO Puderapparat - Bacher-Registersystem - Platten Schnellspannschienen - Edelmann-K?hlung - Superblue