126,684 used machines on RESALE, but how to find them? Machine Search
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 118 by 160 mm 32 mm high -Drawing with the photos -Number: 1x counter bearing available -Price: per piece -Dimensions: 340/95/H220 mm -Weight: 15.4 kg
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 75 by 110 mm 25 mm high -Drawing with the photos -Dimensions: 215/70/H200 mm -Weight: 10 kg
Automat. Bindemaschine / Automatic Binding Bindomatic 9000 Serial-No. 15270002 Dokumentformat DIN A4 Rückenstärke 1,5 bis 15mm Kapazität Bis zu 30 Dokumente innerhalb von 1 Minute Stromversorgung 230 V, 50/60 Hz, 140 W (maximal) Abmessungen 746 x 645 x 43 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Fully Automated Craft Brewery 30hl/brew with Meura Mash Filter This fully automated 30 hl craft brewery, installed in 2015–2017, is in excellent condition and represents high-end European brewing technology. The system is a complete, turnkey solution including all necessary auxiliary equipment. The brewery is still installed and fully operational. The brewhouse has a capacity of 30 hl per brew and is capable of producing approximately 6–8 brews per day. It features a traditional three-vessel configuration equipped with a Meura mash filter for efficient wort separation. The brewery has been used to produce a wide range of both filtered and unfiltered beer styles. The cold block includes 3 × 75 hl fermentation tanks and 2 × bright beer tanks. Additionally, the system is equipped with advanced beer filtration capabilities, including a GEA centrifuge (unitank-compatible), kies ...
approx. 3x belt curves, VanRiet, 45 degrees, driven – used - Price per piece ex location (net): 1.450.-€ (net)incl. loading Manufacturer: VanRiet Type: Belt Conveyor Curve Year of Make: 2017 Condition: good – very good Available: immediately Location: Frankenberg camp / Saxony
Min. 4x belt curves, VanRiet, 90 degrees, driven - used - Price per piece ex location (net): incl. loading Manufacturer: VanRiet Type: Belt Conveyor Curve Year of Make: 2017 Condition: good – very good Available: immediately Location: Frankenberg camp / Saxony No. 2 + 3 – 2.950.-€ (net) Element width: approx. 1.42m Belt width: approx. 1.20m Height incl. feet: approx. 61cm. Radius: outside / outside approx. 4.70m Voltage: 230/400 V, 50Hz, 4.75A, 3kW No. 21 + 23 – 2.950.-€ (net) Element width: approx. 1.42m Belt width: approx. 1.20m Height incl. feet: approx. 61cm. Radius inside / inside approx. 2.20m Voltage: 230/400 V, 50Hz, 4.75A, 3kW
Blowing machine SIG Corpoplast 12 with 12 cavities Type BLOMAX 12 Neck finish: PCO 28 - 1881 Capacity: approx.: 22.500 bph incl. preform hopper incl. preform feeding system + chiller The machine was complete overhauled in 2023, incl. all blowing stations incl. all change by the oven (all maintenance records available on request) Price for the complete reconditioning in 2023 was approx. EUR 80.000,00. The machine was in production with the following preforms: - 500 ml - 13,5 g - 1000 ml - 38 g The machine will be sold without moulds. Working hours: 94000 hours
We currently offer: Iveco generator set Type: G.E. 8210 SRI 26.01 Generator Stamford Type: HC. 434E1 Power: 300 KVA Hz 50 RPM 1500 AVR Control: MX 341 IP 22 Built in 1993 We estimate operating hours to be less than 500 hours Metrics: L: 3.20m B: 1.20m H: 2.10m You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
Key data: 200 KW, 250 kVA
We currently offer: Number 7 John Deere generator set Power Tech 6.8 liters Type: RE 507891 Generator LeRoy Somer Type: LSA 46. 2L6 C 6/4 Power 250 KVA / 200 KW Hz 50 RPM 1500 IP 23 AVR control R448 Year of construction 2006 Metrics: L: 3.80m H: 2.20m W: 1.10m Weight: approx. 2.5 tons You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
SARCMI BLUESTAR 2000 Complete PET filling line: Blow Molding Machine - SBO-14 ROUE - 18.200 bph Air Compressor - CE68BSG40 - 38,9 m3/m Air Conveyor Monoblock Filler BLUESTAR 2000 - 1R 54 72/9H - 0,5 l. -20000 bph, 1,5 l. -15000 bph Cap Elevator Labeling Machine ROLLQUATRO F30 - 24000 labels/hour Fill Level Control Device - STRATEC Shrink Wrapping Machine - АРЕТ 143/DF - 20000 labels/hour Bottle and Packaging Conveyor Pallet Stacker - PALKOMBI Series IBP429 - 30 pallets/hour Pallet Wrapper - ROTOPLAT 2000 - 30 pallets/hour All machinery in good condition, complete working line.
Fully automatic machine for cleaning (blowing out) bottles using compressed air Running direction from left to right Connection pressure 6-9 bar, working pressure 0.5-3.0 bar Output max. 12,000 bottles/h Bottles are rotated 180° so that the openings point downwards. Blow-out needles plunge into the interior of the bottles Pressure sensor for checking the correct blow-out pressure Extraction of blow-out air and residues below the bottles HMI Siemens Simatic Touch Panel PLC Siemens S7-300 With format set for 10 ml vials (diam. 25.3 x 46.2 and diam. 24.0 x 45.0, other format sets on request) Connection 230/400V/50Hz Has worked together with bottle unscrambler 02-0746 (see pdf)
approx. 2.900 pieces shelves for Bito shelving shelves, shelves: approx. 1.30m x 0.50m - used - : Price from location (net) / unit: Shelf: only 6,50 € Price for complete purchase: only 6.-€ (net) / piece! Manufacturer: Bito Type: unknown Year of manufacture: unknown Depth: 50 cm Shelf width: 130 cm Frame height: approx. 260 cm (some only 200 cm) Quantities: Frame: approx. 450 pcs. Shelves: approx. 5,000 pcs. Load capacity per floor: unknown, but at least 100kg Inl. Incidentals Condition: good Available: immediately Location: 69502 Hemsbach
Key data: 1100 mm, 1 , 150 mm
Combination grinding unit with contact roller and air grinding shoe Brush roller Abrasive belt tension, pneumatic motor strength adjustment Specifications: max. working width 1100 mm Max. workpiece thickness 150 mm Min. workpiece thickness 3 mm Sanding belt dimensions 1900 x 1120 mm Feed speed 5/10 m/min. Motor power grinding unit 15 kW Motor power height adjustment 0.50 kW Motor power feed carpet 0.5/1.0kW Operating pressure 6 bar Air pressure approx. 20 l/min Suction nozzle 2 x 200 mm Weight approx. 2100 kg Machine width approx. 1750 mm Cntaou7R Machine depth approx. 1700 mm Machine height approx. 1900 mm
AS NEW CONDITION WORKS IN PRIVATE WORKSHOP FROM NEW. Working mode: Semiautomatic Machine type: Horizontal bandsaw Cut: Straight cut Mitre cuts range: 0° Drive: 4 kW, 3x400 V/50 Hz Saw band speed: 20 - 120 m/min. Saw band dimensions: 4 580 x 34 x 1,1 mm Material loading height: 780 mm Length: 2 172 mm Width: 1 197 mm Height: 1 771 mm Weight: 800 kg This universal semiautomatic bandsaw of a double-column construction, designed for perpendicular cuts of materials up to 280 mm in diameter, provides high quality at an affordable price. The saw arm is guided by two robust columns and laid on preloaded, no-clearance linear guiding on one side and on auxiliary guiding on the other side. The excellent cutting performance results from these features: a three-sided hardmetal precision guide of the 34 mm high saw band and synchronou ...
Collator tb sprint B 312 VP 12 Station variable pile up to 30 cm formats: max. 35 x 65 cm, min. 6.5 x 10 cm paper weights: 20 to 1000 g/m² speed: up to 3300 cycles/h current: standard 400 V, 50 Hz, 3/N/PE additional equipment: • single sucker- and -blower valves, individually adjustable • controlled blast and separating air • missed sheet detector, photo electric, each station • double sheet detector electromechanical at the delivery • paper jam detector over transport table • lighting of transport table • hand feeding station right • delivery jogger for normal- and criss-cross-delivery, selectable by switch • total- and preselection batch counter • SPS programme control with - Touch Screen - missed sheet repeat without machine stop with the next cycle - ejector, faulty sets are separated while running, max. set thickness 4 mm - programmable, au ...
Single-station machine for containers up to 1 ltr. Extruder S 50/20D. Single head, programmed. 380V 50 Hz. Available now!
Used boiling kettle BASTRA, 400 L - Heating type: Electricity - With separate MC 30 control - Boiler capacity: 400 litres The unit has been serviced annually and is in good condition. More pictures and information on request. Visits and test runs are possible by arrangement.
Machine Benhil 8345 Model. 8345 Capacity up to 90 packets/min Pack size 500 gr Dimensions 150 x 95 Product Butter, margarine, etc. Wrap material Aluminium foil or parchment paper in reels. Product Feed Hopper with Screws Photocell Foil Centering unit Weight 2.000 kg (gross) Dimensions Approx. 200 x 150 x 200 cm (l x w x h) Electricity 2,2 kW
Key data: 530 mm
Automatic machine with mitre Cutting Area 90° round 530 mm 90° flat 530 x 800 mm 45° flat 530 x520 mm 30° flat 530 x 320 mm Cutting angle 45°-0°-60° Saw motor 3.0 kW Belt speed 20 - 120 m/min, infinitely variable Equipment: - 99 Programs - Machine stand with chip loading tray - Hydraulic cutting pressure regulation - Stepless speed adjustment - Hydraulic guide arm adjustment - Minimum quantity lubrication - Shutdown at the end of the cut and retraction behind Movable jaw - Chip brush running along - Hydraulic mitre adjustment - Hydraulic vise clamping - Hydraulic saw blade clamping - Instruction manual
Precision wedge shoes BILZ - PKA 4 Payload 7,700 kg screw-on with insulating plate B4 Overall height 63 mm in central position Adjustment range +4 / -6 mm Size 200 x 200 mm Female thread M20 Weight 9.5 kg - New - unused - 6 pieces in stock Unit price
We sell our PPK baler. the main pump and auxiliary pump were replaced this year 2024. Invoices are available. The press only pressed cardboard boxes. It can be demonstrated and put into operation at any time.
spindle diameter: 105 mm x-travel: 2100 mm y-travel: 1500 mm z-travel: 1400 mm Table area: 1750x2000 mm turning speeds: 16-1400 U/min table load: max. 4 t weight of the machine ca.: 18 t The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 150 mm x-travel: 7200 mm y-travel: 3800 mm Plate area: 9000x6000 mm digital readout: AEG ram: diameter: 440 mm ram: horizontal adjustment: 1000 mm spindle travel: 1500 mm threading cutting device:: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1000 mm z-travel: 1600 mm Control: Heidenhain type: TNC 410 table surface area: 1000x1120 mm Table load: 3000 kg spindle stroke: 710 mm spindle turning speed range: 4-1600 U/min main drive motor: 13 kW total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1210 mm z-axis: 1475 mm spindle travel: 710 mm B-axis (table): 360 ° Table dimensions: 1250x1400 mm Table load: 3500 kg T-slots: 22H7 T-slot - distance: 125 mm spindle turning speed range: 4-1600 U/min spindle drive: 16,5 kW Control: total power requirement: 47 kW weight of the machine ca.: 9,25 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 125 mm x-travel: 2500 mm y-travel: 1900 mm w-axis: 1100 mm radial face slide travel: mm table adjustable: 1000 mm digital readout: Pfillips workpiece: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 45 mm wall strength: 2 mm bending radius min.: . mm Control: total power requirement: kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 5x0,85x1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Horizontal Baller for SALE/RENT BAUER 300 Baller is in good working condition (was used in printing house)! Technical specifications: Installation of the secondary raw material baler Manufacturer: BAUER Model: 300 Year of production: 1994 Power: 22 kW Kledex Dk S Asm Aty Atjl Pressing force: 40-50 t The dimensions of the baler are 10,300 x 2,000 x 3,000 mm Tipping weight: ~ 400 kg PRICE AVAILABLE UPON REQUEST! ----- Verkaufen/Mieten Ballenpress BAUER 300 Technische Daten: Bsbmeycfv Iecbw Nvswh Installation der Sekundärrohstoffpresse Hersteller BAUER Modell 300 Produktionsjahr 1994 Leistung 22kW Druckkraft 40-50 t Die Abmessungen der Presse betragen 10300 x 2000 x 3000 mm Kippen Gewicht ~ 400 kg PREIS BEI ANFRAGE!
Three-phase electric motor with brake BALKANCAR, ZAE KK 1204 - 4A ( KK1204-4A ) 0,0,0 18 kW 1440 rpm 220 / 380 V IP44 shaft diameter: Ø 10 mm Flange diameter: Ø 135 mm New !' Dimensions: 220 x 175 x 135 mm
Throttle valve, proportional throttle valve block installation, pilot operated BOSCH 0811 402 642 ( 0811402642 ) FESXE50CA-1X/980LK0B1M 315 bar 24 V DC with built-in electronics (OBE) and inductive displacement transducer New ! Dimensions: 220 x 140 x 300 mm
TOP mezzanine floor with equipment 33x30m 500Kg per m2 approx. 350 m2 2017 railing staircase TOP mezzanine floor with 10m wide barrier free Steel platform / industrial platform (top condition) 85,00 Net per m2 For sale is a high-quality mezzanine / steel structure built in 2017, ideal for industry, logistics, warehousing or production. The system is solid and suitable for high loads – perfect for expanding storage areas without building a new building. All the assets in the pictures are for sale. Shelving Racks/Conveyor Technology/ Stackers/ Ant/ Pallet Truck/ Bito Roller Rack/ Order Racking ⸻ Technical data: Total area: approx. 10 m x 33 m (≈ approx. 350 m²) Floor height (upper edge): approx. 4.10 m Lower edge of the stage: approx. 3.80 m Load capacity: 500 kg/m² Column grid: None clear width 10m Railing height: 1.10 m Staircase: available Ye ...
Valve block, direct-acting 3/2-way lifting anchor valves URBAN, BÜRKERT 312-C-02,0-B-FLNSCH-E-107 2-group group P: 0 - 8 bar 24 V DC used ! Dimensions: 85 x 90 x 110 mm
Valve block, direct-acting 3/2-way lift anchor valves URBAN, BÜRKERT 312/C 4-group group P: 0 - 8 bar 24 V DC used, tested ! Dimensions: 150 x 90 x 110 mm
Valve block, direct-acting 3/2-way lift anchor valves URBAN, BÜRKERT 312-C-02,0-B-FLNSCH-E-107 5-group group P: 0 - 8 bar 24 V DC used ! Dimensions: 180 x 90 x 110 mm
Spring-balanced BOSCH 0 607 454 224 ( 0607454224 ) 3.4 Nm 640 rpm 6.3 bar balancer: TECNA 9200 load capacity: 0.4 - 0.8 kg extension: 1,350 mm used, tested ! Dimensions: 320 x 230 x 150 mm
Machine : Tools for boring mill / radial drilling machine Type: MK5 5 drill rods φ 40 , 30, .. L- 280 – 400mm 3 extensions MK5 – MK4 , L-400-520mm 1 boring tool Oerlikon MK5, φ 70, 6-260 5 top-mounted milling mandrels MK5 - φ 16, 22, 27,32,40mm 2 Clarkson clamp chucks 1 MK5 boring tool, adjustable, φ 60mm 2 Shots 2 milling cutters: End mill roughing/plain φ 56x100mm, / groove milling cutter 4 milling cutters: 2 roughing/plain φ 40x12o, 2 roughing cutters 1 Reduction from MK5 to SK40 Weight: approx. 70kg kg PRICE : € 600,- ex works ! A - T-slot size: approx. 21.5mm, B-35, thread M20 16 T-slot nuts 20 pcs threaded rods M20, L-120 – 400mm 3 x 2 pcs clamping claws 4 nuts long, 6 nuts, washers 2 blocks for adjustment with adjustment screw 4 blocks 80 x 60 x40mm ( underlay )
Bread line baking technology built in 2021 consisting of dough divider, ribbon rounder, intermediate bread proofer and bread long moulder is currently for sale. Bread plant built in 2021 consisting of: - Dough divider bread dough divider machine Soft built in 2021 - Ribbon rounder Rounder built in 2021 - Intermediate bread proofer - Bread long scooter Combi 600 built in 2020
Wide belt grinding machine Boere Elite 1300 BK Grinding width max. 1300mm Grinding calibration roller from below
Convection oven Wiesheu B15-EM for 1 rack trolley 60x40cm. Oven for 1 rack trolley from Wiesheu type B15 with 15 supports for 60x40cm trays. The furnace runs with a high-voltage connection and has a fixed water connection for the generation of steam (procurement). The digital control has a program memory. The stove is immediately available in stock. -digital control - for 60x40cm trays - Voltage: 400V - Frequency: 50Hz - Power: 20.8 kW - Rated current: 30.1 A - Year of construction 08 / 2013
Oven for 1 rack trolley from Wiesheu type B15 with 15 supports for 60x40cm trays. The furnace runs with a high-voltage connection and has a fixed water connection for the generation of steam (steam). The digital control has a program memory. The stove is immediately available in stock. Convection oven Wiesheu B15TS300 -digital control - for 60x40cm trays - with a rack trolley - Voltage: 400V - Frequency: 50Hz - Power: 20.8 kW - Rated current: 30.1 A - Year of construction 12 / 2006
Fully Equipped Bottling System A complete bottling system, ideal for beverage production! Perfect for both small and large-scale operations. System Components: Heated water tanks: 6 units of approximately 3000 liters each 1 unit of 6000 liters 1 unit of 10,000 liters Production lines: 2 complete bottling production lines Small bottling systems: 4-5 units for smaller productions Vacuum machines: Various machines for efficient packaging Blue Water system: Large system with separate oil burner Additional equipment: Approximately 70 components, including machines, spare parts, and accessories Advantages: Ideal for starting or expanding your beverage production Complete system, ready for use High production potential Has been active until 2023
maximum number of results exceeded
please refine your search
