man b used for sale

geared motor, electric motor -Speed: 19.5 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 22 kg

geared motor, electric motor -Speed: 16.2 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 3x geared motors available Price: per piece -Weight: 21 kg

Manufacturer: BIZERBA Type: FK 23 Band Saw BIZERBA Type FK 23 Cutting and portioning of fresh meat with or without bone as well as cutting of long bones, poultry and fish Cutting height 251 mm Cutting thickness 10-190 mm Saw blade speed 17 m/sec Dustbin System for clamping and releasing the saw blade Height-adjustable saw table Protection class IP 55 Voltage 400 V 50 Hz Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60

Gear motor, electric motor -Condition: unused -Speed: 90 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 25 kg

geared motor, electric motor -Speed: 17.5 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 16 kg

Max. size= 45 x 35 cm, Availability= 092023, perfect folding machine for in-house printers, copy and letter shops as well as for digital printers. PBA underfloor suction feeder with integrated alignment table 2 pockets Total counter, control panel, double sheet control, scoring, perforating and cutting devices formats: max. 35x45 cm min. 8.5 x 12 cm Fold length: max. 36 cm; minimum 5cm Paper weight: 40 - 250 g/m² Speed: 160m/min Power connection: 230 V / 10A LOT Loaded in truck or container

2 BOLZ sterile tanks with agitator. volume 16,150 liters max. excess pressure 3.2 bar max. allowable working temperature 150 °C double jacket --> YES Volume double jacket 1,000.0 liters Dimensions: diameter inside 2.490 mm diameter outside 2.580 mm cylindrical height 2.500 mm total height 5.000 mm wall thickness bottom 6 mm wall thickness cylinder 8 mm Full drawing of the tanks available. Used, but in good condition. Visit possible

geared motor, electric motor -Speed: 6.8 rpm -Power: 0.18 kW -Design: B14 angle -Shaft diameter: Ø 25 mm -Protection class: IP 55 -Weight: 17 kg

Specifications Bag dimensions: 1m3 Year of Make: 1999-2000 Weight of the bag: do 500 kg Productivity: 500 kg/h Power connection: 400V/2.2 kW

Combined blower oven with two floors and a fermentation chamber Dimensions: 90x150x210cm Electric power: 15kW Capacity: 4 trays x 60x40cm

Spiral dough mixers Container capacity (capacity): 20 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) Specification of Electric Dough Mixer Flour Capacity: 8 kg Bowl Capacity: 20 liter Mixing Speed: 150/200 r/min Bowl Speed: 12/20 r/min Voltage: 220V/380V 50Hz Electric Power: 1.5 kW Machine Size: 730x390x900 mm

geared motor, electric motor -Speed: 103 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 18 kg

grinding length: 600 mm grinding width: 300 mm workpiece height: mm total power requirement: kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 2,9 x 2,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The main machines in the line: fluid mixer Trusioma hot and cold KO-kneader BUSS Mixing mill Buzuluk 660x2100 mm 4-roll calender Buzuluk 700x1800 mm, inverted "L" tempering and stretching device behind the calender – roller track film thickness profile measuring device winding device

geared motor, electric motor -Speed: 76 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 23 kg

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...

Electric Stacker JUNGHEINRICH type EMC B10 Year of construction: 2005 Maxi loading capacity: 1000 KG Centre of gravity: 600 mm Maximum width of the lower forks: 1250 mm Total length of the lower forks: 960 mm Equipped with new batteries (October 2024) Length: 1500 mm Width: 1250 mm Total Lift height: 1650 mm Weight: approx. 500 kg

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...

geared motor, electric motor -Condition: unused -Speed: 189 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 24 kg

geared motor, electric motor -Speed: 33 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 20 kg

geared motor, electric motor -Speed: 33 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 20 kg

SPECIFICATIONS: Installed power: 6 kW Workpiece length: 1200 mm Pin width: max 100 mm Accessories: 1 soundproofing room 1 loader

geared motor, electric motor -Speed: 34 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 3x geared motors available Price: per piece -Weight: 20 kg

SPECIFICATIONS: Installed power: 6 kW Workpiece length: 1200 mm Pin width: max 100 mm Accessories: 1 soundproofing room 1 loader

geared motor, electric motor -Condition: Geared motor is unused -Speed: 33 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 4x geared motors available Price: per piece -Weight: 20 kg

geared motor, electric motor -Speed: 2.5 rpm -Power: 0.11 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 2x geared motors available Price: per piece -Weight: 22 kg

Key data: 225 mm

Sheet thickness 6 mm Knife length 225 mm Machine weight approx. 1.2 t Space requirements approx. 1.1 x 1.4 x 1.5m Total power requirement 55 kW Notching machine with fixed angle 90°

workpiece length - max.: 3000 mm feed length: - mm length: - mm power capacity: 2 kW Weight: 1300 kg With control panel HBG 10 A guide channel, size of approx. 60 mm diameter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

geared motor, electric motor -Speed: 100 rpm -Power: 0.37 kW -Design: B3 angle -Shaft diameter: 20 mm -Brake -Protection class: IP 55 -Weight: 20 kg

SW BA600-2 CNC machining center with swivel table / built in 1999 / Siemens 840C control / incl. chip conveyor, coolant lubricant preparation and extraction

Dimensions: Length: 7400 mm Width: 4000 mm Height: 3236 mm Extraction capacity: Q = 18000 m³/h P = 15 kW The cabin has a suction machine with filters to suck the powder from the cabin floor. The powder booth is set up in a pit to lower the entire height of the painting line. Manual doors are installed to enter the workpieces into the cabin. The overspray is extracted during powder coating via the floor. On the floor there is a grate for walking on and under the grate there is a second flat floor with automatic self-cleaning system, connected by air ducts with post-filter. A self-cleaning system automatically blows the powder from the bottom to the post-filter (suction machine) and consists of

Oven, doors single-sided, electric Dimensions: 3,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 54 kW Auxiliary heating: electrically indirect via thermoblock

Chemical pre-treatment 3 zones for powder coating with spray ring (automatic) and manual Dimensions: Length: 8000 mm Width: 4500 mm Height: 3500 mm Max. workpiece dimensions (automatic): Length: 6500 mm Width: 1000 mm Height: 2300 mm Max. workpiece dimensions (manual): Length: 6500 mm Width: 2500 mm Height: 2300 mm Tanks are positioned at ground level with a sloping floor. Tank No.1 is thermally insulated and is heated by electric heaters. Achievement: 27 kW. Volume of each tank = 1.00 m³. For degreasing (1st tank), a medium pressure pump is used to operate the 1st spray system. The rinsing phases are also operated by a pump with medium pressure via the 2nd spray system. On the bottom i ...

Oven, doors single-sided, gas Dimensions: 4,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Recirculating air: Q = 12000 m³/h P = 2 x 2.2 kW Heat output: 69 kW Auxiliary heating: Gas indirectly via thermoblock

Chemical pre-treatment for powder coating (3 zones) 1 Dimensions of the cabin length 3900 mm Width 1600 mm Height 2500 mm 2 dimensions of the pre-treatment complete length 4000 mm Width 3000 mm Height 4000 mm 3 Passage opening width 1000 mm Height 1700 mm The chemical pretreatment for the use of nanotechnology or phosphating consists of 3 stages in 1 spray chamber. Chemical spray pretreatment works in time and this means that the workpieces are manually pushed into the chamber. After closing the doors, the passage starts and the pumps start spraying. Each pump has different spray times. After the spraying process is finished, there is an alarm indicating that the door can be opened and the workpiece can be pulled out. All pre-treatment functions a ...

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

Battenfeld HM 500/3400 Clamping force: 500t Year of construction: 2007 Shot capacity: 1937g Injection unit .../3400 Screw diameter: 85 mm Injection pressure: 1574 bar Shot capacity: 1937 g L/D ratio: 22 Clamping unit 500/... Clamping force: 500 t Plate size: 1590 x 1470 mm Distance between tie bars: 1000 x 800 mm Max. plate spacing: 1600 mm Weight: 25000 kg Equipment: -1 x air valve -2 x core pull on the closing side, NW 6 -Interface for robot according to EUROMAP 67 -Integrated temperature control for the feed zone -Core pull movement and parallel ejection via DFEE auxiliary pump -Wear- and corrosion-protected plasticizing unit package -Potential-free contact parallel to the dosing unit

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

The curing furnace consists of a tunnel furnace in which the workpieces are baked after coating. The furnace is a straight tunnel furnace. The frame is made of steel with insulated panels. The mineral wool insulation becomes 150 mm thick in a special construction to prevent thermal bridges 1 Inner dimension length 7,000 mm Inner dimensions width 1,000 mm Inner dimensions height 2,500 mm 2 Outer dimensions incl. thermoblock, length 7,200 mm Outer dimensions incl. thermoblock, width 1,300/2,300 mm External dimensions incl. thermoblock, height 2,800 mm 3 substructure 1 set of steel profiles 80 x 80 and 40 x 80 mm 4 walls 1 set of double-sided galvanized sheets 1mm, outside RAL 5010 5 Insulation 1 set of rock wool 150mm 75 Kg/m³ 6 Ventilation system 1 set of galvanized steel sheet 7 Temperature max. 220°C 8 fans 1 pc. 7,500 m³/h 9 electric motors 1 pc  ...

Open Powder Spray Stand Dimensions: 2500 x 2250 x 2700 [mm] Extraction capacity: Q = 8000 m³/h P = 5.5 kW Filter: 1 stage: Filter cartridges 4 pieces à Ø 325 x 1000 [mm] 2nd stage: Pocket filter (absolute filter for fine dust) Note: The overspray during powdering is absorbed by the suction unit. The powder spray stand is delivered on rollers and is therefore mobile

Dimensions: Length: 8000 mm Width: 4500 mm Height: 3500 mm Extraction capacity: Q = 18000 m³ P = 15 kW The cab has 2 doors on one side for the insertion/outlet of the workpieces. The components are pushed into the cabin for coating via the overhead transport system. Walls, ceiling and doors are made of panels. The filters positioned on the roof absorb dust and other particles from the outside, thus ensuring clean ambient air in the cabin. The overspray during powdering in the cabin is absorbed by the extraction unit

Key data: 700 mm, 800 mm

Machine Details Stock-No. 1105-04033 Type of machine CNC Turning- and Milling Center Make DMG MORI Type CTX beta 800 Year of manufacture 2009 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time IMMEDIATELY Freight basis ex site Technical details turning diameter max. 390 mm turning length 800 mm control Sinumerik 840D sl Siemens Greates Pass Round Over Bed 700 mm Turning Speed Range - Main Spindle 20 - 4,000 min/-1 Power capacity - main spindle 45 / 35 kW max. torque 700 Nm C-Axis 360° Spindle Nose 220H5 Chucking diameter - mm max. bar capacity 102 mm number of toolpositions 12 pos. Number of driven toolspositions 12 pos. power capacity driven tool-stations 14.2 kW Spindle speed - driven tool stations 40 - 10.000 min -1 tool taper VDI 40 DIN69880 max. torque 34 Nm X-AXIS 290 mm Z-AXIS 800 mm rapid traverse X: 30 / ...

roller conveyor 2200-640-600 RA2292 Make: Blume Roller width (RB): 600 mm Nominal/outer width (NB): 640 mm Length: 2200 mm Roller diameter: 50 mm Roller distance: 100 mm Motor Roller conveyors: no motor Height frame: 60 mm Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: good (used) Conveying length in mm: 3000 Nominal / outside width in mm: 660 Roll width in mm: 600 Roll division in mm: 100 Driven: NO For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 20 A -Connection: 230 volts -Number: 7 chargers available -Price: per piece -Weight: 18 kg/piece -functionally tested

Diamond core drilling machine, core drilling machine -3x: drill stand -Max. Drilling capacity: Ø 60 mm -drilling depth: max. 400 mm -Drive: 1050 W -Speeds: 1500/3000 rpm -Core drill: Ø 18/24/29 mm -Sale: only complete -Weight: 70 kg

Liebherr slide-in gearbox from old stock ! As good as new MPS 45X21. 1X25.97 Bosch Rexroth : ZHP5 . 23-0356 . 10014 MNR : 1695745 CMAN / CMIT Item number: 1695745

Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1 inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 60 kg

Capability characteristics: • High-quality tray destacker as a carousel with 12 stations • Material: stainless steel / plastic / plexiglass • Fast format change by replacing the denester cassette • Automatic lines are kept in continuous operation for longer, unnecessary downtime is minimized • Higher effective production output • Optimal personnel deployment: operating personnel can take care of other tasks Inclusive: Trolley for two denester cassettes Destacker cassettes: for trays approx. 265x180 mm and approx. 220 x 180 mm (adjustable) Destacker size: 1000 mm x 1500 mm x 1900 mm (L/W/H) Scale size: 780 mm x 800 mm x 1050 mm Burgmetaal / Technotron mobile denester with carrousel, 12 stations, maximum trayx dimensions: 265mm x 180mm, total dimensions: 1000 mm x 1500 mm x 1900 mm, including tool trolley, dimensions trolley: 780 mm x 800 mm x 1050 mm

electric motor, three-phase motor -Power: 0.37 kW -Speed: 1400 rpm -Shaft diameter: 14 mm -Brake -Design: B5 -Protection class: IP 54 -Weight: 12 kg

VSG Cutting table with roller conveyor used Manufacturer: LISEC/ BYSTRONIC Year: 1996 Cutting width max. approx. 306 cm Dimensions cutting table approx. 7 m, 3.8 x 1.1 m; Dimensions roller conveyor approx. 6 x 3 x 1.1 m; The roller conveyor can be tilted hydraulically. The plant has been dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.