129,802 used machines on RESALE, but how to find them? Machine Search
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 16 mm -Dimensions: see photo technical drawing -Overall dimensions: 52/48/H36 mm -Total weight: 0.4 kg
Key data: 16 mm
Column Drill Speed 200- 3000 rpm 380 V 16 A Height adjustable 55 cm Expellers Drill chuck Albrecht 3 - 16 mm
Ultrafiltration Bucher / UF 4-14 built in 1987 Was used for apple juice used, sale in current condition, price ex location
Bucher /1991 Retrofitted 2020 Ultrafiltration plant Was used for juice With 176 m2 membrane surface which can filtrate 10,3 m3/h at 18 brix used, sold as it is, where it is, price ex location
Control: Sinumerik 840 Dsl Number of spindles: 1
Continuous flow device, with round belt spreader belts Working width 550mm with instantaneous water heater system Fondant station with splash device with melting tank approx. 200l with separate transfer pump (built in 2006) - Tested and cleaned immediately available
This Battenfeld cooling tank is in machine storage at Plastima Used Machinery. The vacuum tank is from 1994 and is in great condition. Brand: Battenfeld Extrusionstechnik GmbH Model: V125VA Year of construction: 1997 Tube outer diameter max: 125 mm Cooling length: 6000 mm
Budde telescopic roller conveyor 5150-12000-600 RA2081 The two telescopic elements of the telescopic conveyor can be manually extended or retracted using a hand crank. Attention! ONLY suitable for truck loading Year of manufacture: 2002 Condition: function-tested, used Optical: Signs of use Base part with double supports: 800 mm height Telescopic elements 2 pieces: manually extendable and retractable Telescopic extension/retraction: hand crank on the operating side Accumulation effect: Accumulation with inclination running upwards Technical data: Stationary part Length: 5150, + 6850 mm Extendable parts Roller width: 600 mm Outer width: 850 mm Height 1 transfer: 800 mm, 1020 with crank handle - Loading e.g. via customer conveyor belt Galvanized rollers diameter 50 mm Roller pitch: 80 mm Operation/crank: front side Self-retaining crank Color: Grey Supports: 2 rigid double supports Base pl ...
thread dia.: 1/4 bis 3 / 75 mm threading length: ? mm thread pitch: ? mm turning speeds: 33 U/min total power requirement: 1 kW voltage: 230 V weight of the machine ca.: 0,074 t dimensions of the machine ca.: 1,20,81 m 2 Die heads,4 sets of cutting dies,Pipe cutter, Foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
for sale NEW - ALDURO Drilling-Milling Machine BFM 20V2 Drilling capacity up to 20 mm Spindle Holder MK 2 Head swivels +/- 90° Stepless speed adjustment 50 - 2250 rpm Cross table 500 x 180 mm Digital X-travel 195 mm Y-travel 140 mm Motor 1.1 kW, 230 V Machine without base (base), Can be purchased separately Weight approx. 113 kg further models and inquiries to FSA Maschinen AG
width of the strips: 75 mm band length: 2000 mm band speed: ~ 1800 m/min total power requirement: 3 kW weight of the machine ca.: 150 kg dimensions of the machine ca.: 0,511 m No. 4904: Belt grinding machine PRIMAT, mod. BSM 75 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Aluminium saw with a cutting length of up to 600 mm with hydro-pneumatic feed Pneumatically adjustable angle between 45° and 90° Pneumatic material tensioners Suction Max. saw blade diameter: 500 mm
grinding wheel size: - mm amount: 2 STK Year: unbekannt 0 Grinding discs- 2 pieces Type Spec. 9A 541 JB U76 Max. RPM 2.360 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, spur gear motor -Type: DF 132-G90 S/6 -Speed: 22 rpm -Power: 1 kW -Shaft: Ø 40 x 80 mm -Protection rating: IP54 -Dimensions: 575/250/H240 mm -Weight: 42 kg
Rail power supply, power supply terminal, digital input terminal, digital output terminal, bus end terminal, end terminal, potential injection terminal, supply module, power supply, injection terminal -Manufacturer: Beckhoff, end terminal -Type: KL9010 -Quantity: 1 piece available -Dimensions: 100/15/H65 mm -Weight: 0.1 kg
Brand Armatec Bystronic Type ZLD 250 Category Rigid Ventouse Piston Serial Number 203019/1-2 Construction year 2003 Weight 50kg Assets 250kg Air pressure 6 bars
Brand Bottero Type Layered Cutting table Fashion model 301C Serial Number GG301C-5564 Construction year 1999 Weight 2.8 tons Assets 10.9 Kva Length mm 4900mm Width mm 3350mm Working height 930mm Transport dimensions L x W x H 420x240 cm + 480x100x160 cm Min.-max. glass thickness 3-10mm 33.1-66.2 Min.-max glass size Max length 3400mm Electric connection 380V Photos/film available: Photos and video available
Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, rotary vane pump -Manufacturer: Busch, rotary vane vacuum pump -Type: RC 0025 E 501 -Drive: 0.75 kW / 1410 rpm -Vacuum: 20 mbar -Dimensions: 560/280/H400 mm -Weight: 36.4 kg
Machine tester Beha Amprobe MT204-S; for tests according to DIN VDE 0113 En 60204; Protective Conductor Resistance Measurement, Loop/Line Impedance Measurement, Insulation Resistance Measurement, Residual Stress Measurement, High Voltage Testing, Measured Value Memory, USB 2.0 Interface, etc.;
Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: Hydrotechnik Limburg, pressure tester -Pressure range: 2x 0 to 10 bar -Dimensions: 260/150/H205 mm -Weight: 3.2 kg
MILLUTENSIL spotting press BV30E-RG New machine in stock for sale..
Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: TGL, pressure tester -Pressure range: 0 to 25 bar -Case dimensions: 330/200/H140 mm -Weight: 3.6 kg
Cycle-controlled lathe Dimensions: 4000 x 2300 x 1800 mm Weight: 4800.00 kg Description: Cycle-controlled lathe with large hollow spindle and high speed, with FAGOR 8055 TC CNC control. Specifications: Turning diameter over bed: 580 mm Turning diameter in the offset: 800 mm Offset length from spindle nose: 280 mm Turning diameter over support 305 mm Center height 290 mm Hollow spindle diameter usable: 80 mm Female thread at spindle end: M85xP1.5 Center width 2200 mm Spindle Spindle speeds: infinitely variable in 2 stages, automatic switching! Level 1: 80 - 750 rpm Level 2: 750 - 2400 rpm Spindle nose: DIN 55026 - A 1/ 8 Recommended chuck size: 250 mm diameter Largest workpiece weight (with steady rest): 2000 kg Feed spindle bearing: 120mm iD/OD Rear spindle bearing: 110mm iD/OD Spindle motor power S1 (100%) / S2 (40%): ...
Pallet truck, pallet truck, stacker, pedestrian pallet truck, forklift truck -Connection: 380 volts -Load capacity: 1200 kg -Lifting height: 990 mm -Dead height: 1450 mm -Width: 670 mm -Length: 1400 mm -Tin length: 920 mm -Empty weight: 300 kg
Rotary Vane Vacuum Pump RC 0100E 5Z1 Pumping speed approx. 100 m³/h Vacuum: 20 mbar 400V/50Hz More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
inner taper of milling spindel: Spannzangenaufnahme collet diameter: unbekannt turning speed range: 1,3 x der Antriebsdrehzah U/min : 165 mm distance spindle - column: ? mm weight of the machine ca.: 28 kg dimensions of the machine ca.: 350350200 mm Shipping weight: 35 kg Packing: ( ca. 400400400 ) mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Speed control unit, speed controller, controller, motor controller, motor control, motor controller -Manufacturer: Oriental Motors, Motor control unit Motor controller -Type: BMUD 120-C2 -Quantity: 1x controller available -Dimensions: 135/60/H100 mm -Weight: 0.4 kg
REF-2559 BIZERBA A400 FBLA AUTOMATIC SMOKED SALMON SLICER Automatic slicer for smoked salmon, trout and other similar types of fish. Manufacturer: BIZERBA Type: A400 FBLA Year: 2005 Power supply: 230/400 V, 3-phase / 50 Hz / 2.5-1.4 A Overall dimensions: width 1,170 mm, length 1,850 mm, height 1,500 mm
Motor 1.4 kW/380 V/50 Hz, spindle 30 mm, tool max. D=200 mm, height and angle adjustment, table 650x600 mm, sliding table 530x280 mm, speeds 3000/6200/9000 rpm (fold down belt), cut-off stop extendable up to 2800 mm, hold-down, table extension 100x200 mm, suction nozzle D=100 mm
Trimmer Bettcher type 1500M2 - NEW /183008/ Trimmer Bettcher type 1880M2 - NEW /183004/ Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60
Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Nucleus, servomotor -Type: NUDrive MP85 10A Bgr2 R Rev2 IP64 -Item No.: DS851028 -Shaft: Ø 14 x 35 mm -Number: 2 servo motors available -Price: per piece -Dimensions: 200/85/H110 mm -Weight: 3.5 kg/pc.
5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, control spool, pneumatic control valve -Manufacturer: Festo, pneumatic control valve -Type: VHER-PH-B43E-B-G18 3488211 -PN: 0 - 10 bar -Dimensions: 110/70/H70 mm -Weight: 0.2 kg
Safety switches, rope pull switches, rope tensioners, tensioning devices, rope tensioner system components -Manufacturer: Allen Bradley, Guardmaster Lifeline Rope Tensioner Rope Pull Switch -Type: LRTS -Quantity: 1x cable tensioner available -Dimensions: 90/90/H45 mm -Weight: 0.3 kg
Used Roll Splitting Machine Manufacturer: BOA Type: RSM 40 t specifications: Roll width max.: approx. 2,600 mm Roller diameter max.: approx. 1,550 mm Drive power: 18.5 kW Cutting force: approx. 40 t Machine weight: approx. 5,500 kg including: Feed and take-off conveyor belt Drive power: 1.5 kW each Weight approx. 2,500 kg
Machine vice, sturdy vice, drill press vice -Machine vice: CEKABA-BON clamping jaws 125 x 40 mm -Clamping depth: 130 mm -Dimensions: 440/210/H90 mm -Weight: 14.4 kg
Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck mount MK6 -Size: 81 to 106 (see photos) -Overall dimensions: Ø 131 x 175 mm -Weight: 5.3 kg
Refurbished Machine for Sale Machine was completely dismantled and rebuilt. All wear parts -ball bearings-bushings-etc. new Electrics new, motors rewound and checked. Measurement protocol available. Sold with a 6-month parts warranty. Old machine can be taken back. Tank cars are also available. Offer is "without boiler" More images possible if needed
Draw tube, draw rod for step chucks, precision chucks, quick-release chucks, collet sleeves, collet chucks, tool holders, tool holders, collet sleeves -Manufacturer: Schaublin, pull rod for quick-release chucks -Recording: M24 -Dimensions: see photos -Dimensions: Ø 150 x 525 mm -Weight: 3.3 kg
Step chuck, precision chuck, bell pliers -Manufacturer: Schaublin, Step chuck precision chuck 7 pieces -Photography: see photos -Size: 21 to 50 mm, see photo parts list -Dimensions: Ø 56 x 120 mm -Submission/Price: complete -Transport dimensions: 230/115/H120 mm -Weight: 4 kg
Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step Collet Ring Chuck -Hole: Ø 25 mm (see photos) -Size: 22 to 87 mm -Dimensions: Ø 96 x 110 mm -Weight: 1.1 kg
Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head, tap wrench -Tap cutting set: 47-piece / internal and external threads -Size: M3 to M20 -Individual components: see photos -Dimensions: 500/420/H85 mm -Weight: 9.1 kg
Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head -Manufacturer: Ridgid, Thread cutting head model 5008 -Pipe size: 1/4 to 1 -built-in cutting jaws: 1 -Dimensions: 190/240/H75 mm -Weight: 3.4 kg
Key data: 400 mm
Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,500 mm Width 1,700 mm Length 4,000 mm without tailstock Bed width 550 mm Bed height 800 mm Bed length 2,000 mm Face Plate Ø 900 mm Forkardt Chuck Ø 500 mm without tailstock, but can be placed Max. workpiece lengths without tailstock 1,500 mm Turning diameter over bed 800 mm Turning diameter over support 640 mm Center height 400 mm 6 pieces of baking 4-fold turning steel holder
Key data: 340 mm
Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,400 mm Width 1,300 mm Length 4,150 mm Bed width 480 mm Bed height 850 mm Bed length 3,000 mm Face plate Ø 600 mm Forkardt Wedge Bar Chuck Ø 315 mm max. workpiece lengths 2,000 mm Turning diameter over bed 680 mm Turning diameter over support 480 mm Center height 340 mm Drive power 6.5 / 10 kW Lynette Ø 320 mm Multifix holder size C with 5 cassettes
maximum number of results exceeded
please refine your search
