make plant used for sale

Leybold Vacuum Casting Resin System VGH 1000 Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

A PUR foaming system with Yaskawa industrial robot is offered. Min. dispensing rate: approx. 0.15g/s, max. dispensing rate: 1.6g/s, material system: polyurethane Penguin Foam 3151/3157, drum capacity: 200l, operating voltage: 3 × 400V/N/PE, frequency: 50Hz, control voltage: 24V DC, upstream fuse: 16A. Approx. 30000 assemblies were foam-applied using the system. The system was shut down in 2024 according to the manufacturers instructions. Documentation available. An on-site inspection is possible.

BWT Wassertechnik BEW-O-001.40 Ozonator Water Treatment Plant Featuring a Siemens Simatic OP3 control panel Probox Analysis Unit Auction-ID: A1-48805-181

AGICOM recycling machine trade: Used eddy current separator Eddy Current from Goudsmit

Technical data: Dimensions and weight Width of the machine: 2230 mm Length of the machine: 2400 mm Weight of the machine: 1550 kg approx. Performance 0 – approx. 55 m / min, endurance run. Cycle operation power / hour depending on the operator. Up to 2,000 pcs/hour depending on packaging Drive Belt press belt 1 x 0.75 kW Noise 70 dB (or less) Connection 3 x 400 V, 25A, 50 Hz, powered by the LUNEX basic machine. Compressed air None Formats Min. width approx. 60 mm depending on the packaging Min. length approx. 150 mm depending on the packaging Max. width 1600 mm (= passage width) Max. length in principle not limited Material All formats depend on the nature of the packaging. Dimensions are valid for folded blanks. Motor Glulam Bridge Lenze Type: MDXMA2M080-32 (IP 55) 50/60 Hz 0.75/0.92 kW 400/230 V 1.90/3.30 Amp.

Format lamination line / lamination line / laminating machine Make Fetzel Type SOVA1 Total power 8 KW Compressed air 6 bar / 250 l/min. Lamination width up to 400 mm Total length 4000 mm, total width 1100 mm, total height 1800 mm With 3 winding/unwinding rollers at the start, heated laminating roller at the top and bottom, laminate winding and protective paper unwinding at the end. Various measuring rollers and deflection rollers. With documentation.

Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specially designed for the precise, process-reliable cutting of stainless steel pipes (e.g. for fuel, brake, air conditioning or hydraulic lines). The system has optical laser marking detection. The control panel can be used to choose whether the cut is triggered mechanically (e.g. on the back of a union nut) or fully automatically via the optical detection of a laser mark applied to the tube. Thanks to the integrated rotating 3-jaw cutting head and a micro spray unit (minimum quantity lubrication), machining is extremely gentle on the tool. The pipes remain almost completely dry and free of coarse dirt. The entire process from insertion to clamping, separating and depositing is highly automated in a material-friendly cycle process. Fully integrated ...

Consisting of: 1x Actini Decontaminarion unit, skid mounted with built-on switch cabinet equipped with Siemens Simatic HMI Touchscreen control, 1x Actini stainless steel vertical storage tank, y.o.m. 2024, capacity 6200L, 1x Actini pump unit with built-on switch cabinet with 2 PH meters, 1x plastic Caustic bin, 1x plastic Acid bin, 3x plastic Soude/Acid bins in various sizes, With connecting pipework Auction-ID: A1-48959-567

Heating capacity: 110kW. Air displacement capacity: 11,500 m3/h. Auction-ID: A1-49552-94

Airflow: 0.75 m3/sec or 2700 m3/h. 3 ph. 50 Hz. Operational amperage: 3.2A. Maximum amperage: 4A. With control panel and documentation. Auction-ID: A1-49552-44

Tandem hot melt system with two dosing pumps for PUR hot melt adhesives. Well-maintained condition, from production. 400 V, 50 Hz; dosing pumps and control available. Auction-ID: A7-49816-103

Equipped with cooling and heating. Maximum capacity: 10,000 m3/hour. Type of refrigerant: R407c. Auction-ID: A1-49552-16

Thermal process plant with nitrogen and formic acid supply, incl. Leybold vacuum pump and control system. Year of manufacture 2011. Well-maintained external condition, but without documentation and without available password – therefore only tested to a limited extent. Power 10 kW; Load current 25 A; Feed-in 3/N~ 400/230 V 50 Hz; Breaking capacity 0.3 kA; Operating hours approx. 21,286 h Auction-ID: A7-49816-99

Manufacturer: Normet Model: Norrunner Type of machine: Concrete spraying machine Year of manufacture: 2017 Power: 425 kW Total weight: 31720 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

TBA 19 20 V 125 Slim complete line in excellent condition. PLC upgraded to RX3i TSA 21 2003 Multi Shrink Carton Sealer Manual Conveyor Hours: 68632

TBA 19 200 slim line with HI kit was producing 180 ML Hours 65238 PLC upgraded to RX3i TSA 21 2004 Multishrink Conveyors

used aseptic filling line SIG-COMBIBLOC, Type CFA 310-32, built in 2004. Capacity: 10,000 E/h Packaging type: C3, (1ltr. slim) Included: - Automatic unpacker and feeding of blanks - Closure applicator - Tray packer - Vertical buffer - Various conveyors - Control cabinets, etc. Dismantling by the buyer Location: EU country

Quantity: 5 Type: Danae Height: 400–600 mm Container: C10L (10 liters) Remarks: Set of 5 container-grown, evergreen-growing Danae. Auction-ID: A1-49609-13

GOIMENDI hydraulic power unit functional. Power: 11 kW Maximum pressure: 280 bar Displacement: 28 cm³ Weight: 400 kg Auction-ID: A1-49938-43

Quantity: 5 Type: Danae Height: 400–600 mm Container: C10L (10 liters) Remarks: Set of 5 container-grown, evergreen-growing Danae. Auction-ID: A1-49609-12

Industrial Refrigeration System – Carrier 30RH + 2 ONI Refrigeration/Tempering Units For sale is an industrial refrigeration system consisting of a Carrier chiller / chiller type 30RH and two ONI cooling/tempering units. The system originates from a commercial/industrial application. Carrier chiller: Manufacturer: Carrier Type: 30RH Version: 30RH-160-B0676-PE Ident/Serial number: H2012005570 Year of manufacture: 2012 Refrigerant: R407C Refrigerant capacity: 40.6 kg 2 refrigeration circuits of 20.30 kg eachVoltage: 400 V Frequency: 50 Hz 3-phase Max. operating current: 136.3 A Max. power consumption: 79.7 kW Weight carrier device: approx. 1,368 kg Auction-ID: A7-49942-27

Water Distillation Plant for WFI Water Manufacturer : Kemiterm Type: 1000MS-6 Technical specifications : low pressure 5/3 bar high pressure 8/5 bar Temperature 100 °C / 85 °C GMP Distillation capacity up to 2200 l/h Documents: available

Revamping year 2023, with STAMFORD 600 Kw generator year 2022, oil filtration unit, and various equipment supplied with the system. Cummins C825 D5 is natively an 825 kVA industrial diesel generator set, but it is often integrated and configured within cogeneration plants Continuous Duty Power (Prime Power - PRP): 750 kVA / 600 kW Emergency Power (Standby Power - ESP): 825 kVA / 660 kW Engine: Cummins QSK23-G3 (6 cylinders in-line, 23 liters displacement, turbocharged. Alternator: Typically paired with a Stamford model (e.g. S6L1-C41). Voltage / Frequency: 380-440 V / 50 Hz.Rotational speed: 1500 rpm Auction-ID: A1-49971-1

Device that measures the tactile sensitivity of the cornea THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-49883-233

UK Power Generators Ltd have in stock the container for the generators to be inserted and perform their energy production operations. Manufacturer: Jenbacher Ideal for Jenbacher 320,316, 314 …. 312 series generators Available for sale… The empty container with highly specialised flooring and walls considering the equipment to be installed in there. The container pictures are attached to this advert, as seen. Everything inside the empty container. Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us today to get a quote.

Technical data Manufacturer: RW Rolf Wolfgang GmbH, Ditzingen Model: Epoxy Inject (Injection Device Recirculation) Type: 100/120/25/6 No: 30.01.88 Year of Make: 2002 Drive: Compressed air Permissible Air inlet pressure: 8 bar Max. operating overpressure: 8 bar Working pressure: 1 to 8 bar Dimensions: 1200 × 800 × 1950 mm Weight: 1600 N Flow volume A-pump: 29 ccm/DH Flow volume B-pump: variable with rocker arm adjustment and internal mixing Container: Stainless steel 1.4301, permissible Pressure 6 bar, test pressure 8.6 bar Permissible Container temperature: -20 °C to 80 °C Configuration Design: Air-operated dosing and mixing system with two pump circuits and stainless steel tank. Auction-ID: A1-50026-54

AGICOM recycling machine trade: Used eddy current separator Eddy Current from Goudsmit. The Eddy Current non-ferrous separator is intended for the separation and recovery of non-ferromagnetic metals (e.g. aluminium and copper) from non-adherent material streams. The separation process of the Eddy Current non-ferrous separator is based on the so-called "eddy current principle". When electrically conductive materials are exposed to a rapidly changing magnetic field, current is induced. Such eddy currents create a magnetic field that is opposed to the changing magnetic field of the magnetic roller (the output magnet). Electrically conductive particles passed over such a magnetic roller are therefore repelled by the changing magnetic field. The non-electrically conductive materials fall off after passing through the magnetic roller. The separated non-ferrous parts and the cleaned mat ...

Grimme GL 34 KL 4-row potato planter – 2007 Specifications: Brand/type: Grimme GL 34 KL Year of construction: 2007 Identification number: 24401082 CE marking 4-row version Standard row spacing: approx. 75 cm Working width over 4 rows: approx. 3.00 m Storage bunker: approx. 1,200 kg 4 individual cup leg elements Suitable for seed potatoes of approx. 35–55 mm, depending on shape and grading Mechanically driven cup belts Mechanically adjustable plant spacing 4 running/drive wheels Tires: approx. 11.00/65-12 AS Dimensions indicative: approx. 3.30 × 3.20 × 2.60 m (L × W × H) Own weight indicative: approx. 1,500–1,800 kg Features: Green Seed Cups with Insert Cups Adjustable shake/guide device Markers left and right Hydraulic track wipers Ridging hoods/ridge formers Electric control box for e.g. marklights, lighting and various driving/track functions  ...

Nestro colour mist column - built in 2003 -Ideal for small and medium-sized businesses 4 swivel castors provide great mobility and easy handling 3 filter mats (will be replaced) ensure optimal filtration and a dust ejection of less than 3 mg/m³, according to TA Luft The built-in double-sided centrifugal fan is low noise, the high-performance impeller with a Efficiency of 82% is enormously economical (LxWxH)- 600x800x1200 mm Filter area - 1.5 m²

Hongwing Heavy Industry Crusher Bucket – Model BKT32034CRUSH – Year 2025 Technical data: Manufacturer: Hongwing Heavy Industry Model: BKT32034CRUSH Year of construction: 2025 Serial number: HW2512149 Capacity: 0.90 m³ Width: 34\" (approx. 865 mm) Net weight: approx. 2,300 kg (5,071 lbs) HARDOX wear parts CE marking ISO 9001 Equipment: Sturdy steel construction Crushing jaws with HARDOX wear lining Excavator attachment for crushing construction waste, concrete, natural stone and similar materials Industrial design for professional use Condition: Year of construction 2025 Visually as good as new condition Little to no visible signs of wear Stock goods Functional test was not performed Notes: Only the crusher bucket shown is sold. Dimensions, weights and technical data according to the nameplate. Auction-ID:  ...

Hongwing Heavy Industry BKT3036CRUSH Crusher Bucket – NEW / UNUSED (Year 2025) Manufacturer: Hongwing Heavy Industry (HW) Model: BKT3036CRUSH Type: Hydraulic Crusher Bucket/Crusher Bucket for Excavator Year of construction: 2025 Condition: New and unused CE compliant ISO 9001 certified manufacturing Hardox® Wearparts – highly wear-resistant crushing jaws and wear parts Working width: 36 inches (approx. 915 mm) Bucket volume: 0.90 m³ Net weight: approx. 2,550 kg (5,622 lbs) Serial number: HW2601052 Suitable for 30 t class hydraulic excavators. Ideal for crushing and processing: Concrete Bricks Natural stone Asphalt Construction waste Perfect for demolition, civil engineering, road construction and recycling work. Sturdy steel construction with Hardox® wear lining for long service life. Crushing jaws without any noticeable si ...

Hongwing Heavy Industry BKT3036CRUSH-B Crusher Bucket – NEW / UNUSED (Year 2025) Manufacturer: Hongwing Heavy Industry (HW) Model: BKT3036CRUSH-B Type: Hydraulic Crusher Bucket/Crusher Bucket for Excavator Year of construction: 2025 Condition: New and unused CE compliant ISO 9001 certified manufacturing Hardox® Wearparts – highly wear-resistant crushing jaws and wear parts Working width: 36 inches (approx. 915 mm) Bucket volume: 0.90 m³ Net weight: approx. 2,550 kg (5,622 lbs) Serial number: HW2601012 Suitable for 30 t class hydraulic excavators. Ideal for crushing and processing: Concrete Bricks Natural stone Asphalt Construction waste Perfect for demolition, civil engineering, road construction and recycling work. Sturdy steel construction with Hardox® wear lining for long service life. Crushing jaws without any noticeabl ...

With cow recognition ___ milk measurement ___ automatic afname___ 2 krachtvoerboxsen___ IQ MILKING DIG ____ 75 collars with bronze detection ___ herringbone between hind legs milking at 65 degrees Auction-ID: A3-46162-2709