mak engine 6 used for sale

Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-600 features a press capacity of 600 tons and a stroke length of 350 mm. It includes a slide area of 2900 x 1300 mm and a bolster area of 3000 x 1400 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-600 machine we have for sale. Contact us for further details.

motor: 3 kW stroke: 60 cm motor (saw) tilting angle arm can be changed sawblade diameter: 350 mm

Engine Brand: CUMMINS, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 210 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/cummins-6cta-8-3c-cpl1783- new/22420, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.700 kg, Type number: 6CTA 8.3C CPL1783

Saw blade length: 4390 mm Cutting height: 345 mm max. cutting width: 585 mm Wheel diameter: 600 mm Engine 2,2 kW Table 680 x 680 mm Saw blade guide Foot brake

Sanding width: 650 mm. Sanding belt sizes: 650 x 1900 mm. Number of sanding units: 2 Roller 11 kW, Pad 7,5 kW Max. pass in thickness: 200 mm. Feed speeds: 5 and 10 m/min Motor feedbelt: 2,2 kW Pneumatic belt tensioning and oscillation

Semi-automatic

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: No Flywheel , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 12 Volt , Injection Type: Electronic Fuelpump (EDC) , , https://www.hamofa.com/catalog/product/view/id/292167, , = More information =, , Type: Engine, Empty weight: 1.600 kg, Type number: C13 RRA-6013858

Operating voltage: 380V, connected load: 3.05kW, weight: 1.1t, an on-site inspection is possible.

Rated current: 117A, connected load: 68kW, an on-site inspection is possible.

Engine Brand: CUMMINS, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Rated Power: 224 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/292649, , = More information =, , Type: Engine, Empty weight: 1.025 kg, Type number: 6C8.3 CPL1221

Tool holder type:Weldon 16 mm Tool holder shaft type:DIN 69880 E2-40 x 16 Shank diameter:40 mm length:75 mm 90° angle rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.

tool taper:ABS-100 VDI

swing diameter:80 mm workpiece length:450 mm weight of the machine ca.:3500 kg

closing pressure:6600 kN weight of the machine ca.:45,5 t

number of spindles:6 turning speeds:8000 U/min weight of the machine ca.:3,5 t

Basket size LxWxH:550 x 300 x 350 mm No. of washing chambers:1 No. Of tanks for washing:1 Temperature for washing water:60 °C Ultrasonic cleaning unit with high alloybasket - Ultrasonic frequency 28 kHz - automatic breakdown for heating and ultrasonic for low level water

box lenght:594 mm box width:396 mm box depth:280 mm :53,8 l internal dimension:564 x 366 x 262 Loading:30 kg New stacking boxes PP made by SSI Schäfer - 200 pieces type LTF 6220 LK 20G - 200 pieces LTF 6280 LK 20 G - Price per piece, min. purchase quantity 20 pc.

turning diameter:650 mm turning length:1.500 mm chucking diameter:400 mm Spindle diameter at the front bearing: 180 mm Spindle bore: 132 mm Max. speed: 1,800 rpm Fixed Lynette Operating hours: 38,500 Approx. spindle hours: 1/3 of operating hours

table-size:900 x 600 mm three-axis-real value indicator: EDM Walter axis stroke (X,Y,Z):400 x 600 x 180 mm workpiece weight:max. 650 kg

x-travel:630 mm y-travel:200 mm z-travel:360 mm total power requirement:7,5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:1500 x 1800 x 1900 mm spindle taper:SK40 table-size:250 x 1100 mm

feed pressure:8 bar :9 m³/min Number of working hours:18671 h voltage:380 - 415 V total power requirement:58,5 kW weight of the machine ca.:1300 kg dimensions of the machine ca.:2000 x 1100 x 1700 mm

Article: profile turning trip dog Manufacturer: Schütte Many different sizes for Schütte profile turning attachment 68AE Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Laetus code reader, Elec: DC18... 32V

- Manufacturer: Winterhalter - Type: GS660 - Heating capacity: 12.0 kW - Connected load: 15.8 kW - Rated current: 25.5 A - Water pressure: 250 - 600 kPa - Water temperature: max. 60°C Dimensions: Width: 137cm Depth: 86cm Height: 177cm

Dosing machine Comas DPCI 600 - Year of construction 2004

For sale we offer used driven roller conveyors. Manufacturer: Siemens Dematic, Transnorm different lengths and configurations possible Width: 600 mm Roll diameter: 50 mm Zone length: 500 mm Large quantity available )see pictures) If you are interested, please contact us.

2-roll flow-forming line NAM600S General condition: practically new / already out of service Scraper device (around the tailstock) Working stroke max. 500 mm Scraper force, infinitely variable from 50 - 200 kN Hydrau I i k / lubrication / cooling system Drive power Hydraulics approx. 75 kW Olin content Hydraulic tank approx. 1,500 I Equipment/Com ponents Hyd raulics Make Parker Hannifin Drive power oil lubrication approx. 4.4 kW Olin content Lubricant tank approx. 600 I Equipment/Com ponents Lubricant system Make Parker Hannifin Connected load Cooling system approx. 2.2kW lnhalt Coolant tank approx. 650 I Powerful coolant supply, adjustable 0 - 200 l/min. Cooling water requirement hydraulics + lubrication approx. 2.500 /h Cooling water flow temperature max. 25C min. Cooling water differential pressure 2bar Cooling water system jerk max. 5 bar Compressed air system pres ...

2x Wood drying chamber dry chamber energy saving system 606 economy It is run until 2018. The heating system can be purchased in addition - wood chips with 400 KW heating capacity and boiler , etc. - Same year of construction. The solar system/panels on top can also be purchased. Find more here - .ucymachines/ Contact us at - sales@ucymachines

2016 OCE Varioprint 6200 ( Speedupgrade ) is 6250 because its been upgraded. Very fast black and white digital printing machine Speed ​​200 A4 pages/minute 1 PaperInput module (4 compartments) 1 HighCapacityStacker BLM 200 Booklet Maker Trimmer BLT289, Squarefoldmodul SFM204 Top-Cover R-sided Docking DFD2 Interface PCL Streaming Year of construction 2016 Counter: 75.262.000 The machine is dismantled now Find more here - .ucymachines/ Contact us at - sales@ucymachines

Model: DOTR 63000/123 Rated Power: 50 / 63 MVA High Voltage (HV): 115 kV High Voltage Tapping Range: +9 / -9 x 1.778% (adjustable under load) Insulation Level HV: 123/550/230 kV Low Voltage (LV): 31.5 kV Insulation Level LV: 36/170/70 kV Tertiary Voltage: 6 kV Insulation Level TW: 12/75/28 kV Frequency: 50 Hz Vector Group: Yynyn0(d) Cooling Method: ONAN / ONAF Maximum Oil Temperature Rise: 60 K Maximum Winding Temperature Rise: 65 K Ambient Temperature Range: -25°C to 40°C Impedance: - At 50 MVA: 15.8% (± IEC-Tolerance) - At 63 MVA: 21% (±7.5%) No-Load Losses: 12.5 kW (+IEC-Tolerance) Load Losses at 50 MVA: 154 kW (+IEC-Tolerance) Noise Power Level at ONAF (No Load): 80 dB(A) Weight Details: - Shipping Weight: Approx. 87,500 kg - Weight of Oil: Approx. 15,300 kg - Active Part: Approx. 58,500 kg - Total Weight: Approx. 89,800 kg Dimensions: - Shipping Dimensions ...

1999 WEBER LC 2000 DDP-600 Working width max. 600 mm Workpiece thickness max. 150 mm automatic measurement of the workpiece thickness Feed continuously adjustable 2 - 12 m/min. Aggregate equipment: 1) Contact roller unit with smooth steel roller Drive motor 15 KW, pole-changing for 2 grinding speeds 2) Rubber contact roller assembly with corrugated rubber roller Hardness 60 Shore drive motor 15 KW, pole-changing, this one The motor also drives the subsequent sanding shoe unit 3) Sanding shoe unit pneumatically controlled Machine complete with small parts return, designed as a transport curve, as a plate conveyor transport Machine weight approx. 1,800 kg Connection values: 400 V, 50 Hz, 3 Ph. Find more here - .ucymachines/ Contact us at - sales@ucymachines

2019 WK Systemtechnik ILS 600 – HTL – Ionline Lubrication System Dickschickt preservation system. The oil is applied via nozzles The spray system is a minimum quantity spray system for high-precision dosing of preservative oil. With the spray system you can be coated or oiled reproducibly. By spraying using two-substance nozzles, the finest layer thicknesses can be applied without contact and a wide viscosity range can be covered. The forming medium is in a closed circuit; the excess pressure created by the spray air in the chamber is sucked off at the inlet and outlet using a vacuum lock, so there is no environmental pollution. General data Dimensions (WxHxD) without conveyor units 2486mmx2080mmx2722mm Dimensions with open doors 3265mmx3510mmx2722mm Weight approx. 2500 KG Electrical connection Supply voltage 400 Volt / 50 Hz Power 15kVA Fuse protection 35 A Control v ...

Manufacturer: Peddinghaus Model: FDB 600 Type of Machine: Flat steel drilling and burning machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

2011 HACO HSLX 6008 Hydraulic Shearing Machine Technical Condition: operational Manual: Attached Specifications: Mild steel capacity: 8 mm Cutting length: 6020 mm Cutting angle adjustment: 105°-3° Number of plate holders: 33 Number of strokes max. min. angle 4-8 Stroke backgauge: MOT(1) version: 1000 mm SAB(2) version: 1000 mm/s Working height 1130 mm Motor power: 15 kW Weight approx.: 26 tonnes Voltage: 3x400V Year of construction: 2011 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Rippert HL9-630/1070-Bex Extraction system Type : HL9-630/1070-Bex Position : LG 0 Volume : 27,500 m³/h Pressure Increase : 3,750 Pa Density: 1.2 kg/m³ Power Input : 39.0 kW Temperature max: 40°C Temperature Medium: 40°C Motor Capacity : 45.0 kW Speed : 1,450 1/min (RPM) Max. Speed: 1,450 1/min (RPM) Special Speed: 1,450 1/min (RPM) Capacity: 100,000 m³/h Filter hoses: 462 pcs., 4190x140 mm Ø, PE – needle felt 400 g/m², antistatic, calendered, with test certificate class M, the filter hoses were only completely replaced in 12/2022 Support type: Spiral springs for hanging in tabs of the filter hoses Find more here - .ucymachines/ Contact us at - sales@ucymachines

Dematic conveyor system roller conveyors 16000-600-540 RA2340 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of manufacture: unknown Available conveyor lengths (FL): 16000 mm Stowage space size: 750 mm Nominal/outer width (NB): 600 mm Condition: good (used) Roller width (RB): 540 mm Roller pitch: 125 mm variable Drive types: SEW geared motor Weight of conveyed goods: up to 30 kg Stowage mechanism: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g: additional elements to expandable frequency converter supports lateral guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric  ...

Dematic conveyor system Accumulating roller conveyors Roller conveyor 3000-600-540, 750 RA2290 Manufacturer: Dematic Type: Drive unit accumulating roller conveyor Year of construction: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Head and center drive Weight of conveyed goods: up to 30 kg Technical data: SEW geared motor 380V RA2290.1 Manufacturer: Dematic Type: Accumulation roller conveyor extension module Year of manufacture: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Overdrive from RA2290 (necessary) Weight of conveyed goods: up to 30 kg Optionally available e.g: SEW Eurodrive / Movimot frequency inverter Supports Sid ...

Drive: . kW Capacity: . kg/h material: . 5 pieces Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us: More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70t. More than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drive: . kW Capacity: . kg/h material: . 6 pieces originally for manipulator AMP1000 Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us: More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70t. More than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drive: . kW Capacity: . kg/h material: . 4 pieces For Manipulator AMP1000 Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us: More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70t. More than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drive: . kW Capacity: . kg/h material: . 4 pieces Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us: More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70t. More than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drive: . kW Capacity: . kg/h material: . Bandages Trelleborg 2 pieces Bandages Vorwerk 2 pieces For AMP 1000 Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us: More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70t. More than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw creel esterer hdn600 hydraulic saw span hydraulic chip carriage sparrow cape saw

Saw creel esterer hdn600 hydraulic saw span hydraulic chip carriage sparrow cape saw

with computer control Band width: approx. 63cm Band length: 75cm extendable on one side to 110cm Different belt speeds Roll gap 0.5-45mm with trawl net and knitting board Machine completely stainless steel - Ribbons new - Tested and cleaned

Full Gang Esterer Hdn 600 Passed 710 Stroke 600 Hydraulic Saw Spander Fully Hydraulic Chip Wagon Auxiliary Wagon Splitting Wedge Cape Saw

Control: SIEMENS - 840 D - - -: - - - - - - - - -: - - - - - - Milling Machine - Horizontal | DMG - DMC 60H linear The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMC60Hlinear | DMC 60-H | DMG - DMC 60 H The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Working length: 6100 mm Bending capacity: 3.0 mm CNC control: 400 A Bending angle: 143° Distance upper beam – table: 200 mm Projection: 1,050 mm Foot step switches: 2 pcs. Motor power: 11.5 kW Dimensions (length x width x height): approx. 7000 x 1500 x 1850 mm Weight: approx. 9.5 tons