mak engine 6 used for sale

Key data: 6000 mm, 2000 mm

Ref.Nr. 00846 Name of the system: Used waterjet machine Spare parts system Manufacturer Flow Model Foracon WS3-20/602KS Built in 1995 Sheet size 2000mm x 6000mm Achievement 9Kw ( Engine ) 2 pumps (flow) 2 cutting heads Operating hours pump 1 = 19700 h Operating hours pump 2 = 24751 h Incl. sand tower Incl. sludge removal system Renewal of the control system 2016 ( Engelmann company ) Condition of the system was disconnected a week ago Is still under power but cannot be demonstrated because the cables have been cut during disconnection Customer has used the system until the end Submission date Immediately

A nice Koppens spiral freezer. Model SVR600/20-50-82 with a product capacity of maximum 2.000 kg/h. In/outfeed configuration is North/South. Infeed height = 860mm, outfeed height = 2940mm. Belt rotation is Clock Wise, belt width gross = 660mm, belt width net = 585mm, max product height = 45mm, numbers of tiers = 20 tiers. Belt mesh width = 6mm. This Koppens spiral freezer has been well maintained and is in good condition. The freezer is executed with a S.S. control box(with Danfoss inverter), three/six ventilators, Hot-gas defrost. Drawings and further technical details see Technical Data PDF. We can deliver this spiral freezer with a complete ammonia pump circulation system with 115 kW cooling capacity at -35/+40°C (product number M24-6….). This would be enough capacity for 1.000 kg/h of product. (three fan configuration). Visit also our website: used-refrigeration

Transnorm inclined roller conveyor 2355-980-640 - Showroom machine RA2316 Make: Transnorm Roller width (RB): 640 mm Nominal/outer width (NB): 980 mm Length: 2355 mm Diameter rollers: 50 mm Distance between rollers: 55 mm Roller conveyor motor: SEW drive motor frame height: 210 410 mm side guide with 200mm belt conveyor included Conveyor speed: freely adjustable with frequency converter Incl. supports, curent height 800mm Optionally available: Supports, if deviating from the current ones MFE52 Ethernet frequency inverter control unit Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany Features: Construction year: 2017 condition: Ausstellungsstück nominal voltage: 380-500V angle: 13,4° Conveying length in mm: 2355 Nominal / outside width in mm: 980 Roll width in mm: 640 Roll division in mm: 55 Driven: YES Engine type: 2  ...

Transnorm Rising falling Incline belt conveyor with leading belt GF 4600+3300-600-600 RA2202 Technical data: Conveyor length (NL): 7900 mm ( 4600 mm riser segment + 3300 mm forerun) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7900 ( 4600 + 3300 ) Nominal / outside wid ...

ABB Robotics IRB 6600 175/2.8 S4C+M2000 Robot Control: S4C+M2000 Number of axes: 6 Max. load capacity: 175 kg max. working range: 2800 mm Year of Make: 2004 Scope of delivery: robot, controller, cable, teaching panel, circuit diagrams Used goods – normal signs of wear present, yet fully functional. More details and pictures on request.

Connected load 380V 2.2kW Cutting height 300 mm Cutting width 570 mm Suction 120 mm Band saw guide at the top and bottom Attack Total height of the machine approx. 2100 mm

Linear rail with folding cam Height-adjustable for mounting on hole punches

Used sheeting machine FRITSCH; Type: Rollfix 60/650 E -in bakery condition- - Automatic flour shaker - Automatic reel - storable programs - Multiple degrees of reduction - Freely programmable curve settings - LCD display - Condition: Good, ready to use The machine is in good condition and ready for immediate use. Visits and test runs are possible by arrangement.

Key data: 635 mm, 510 mm, 460 mm

Machine Details Stock-No. 1105-04041 Type of machine Machining Center - Vertical Make LID MAHO DMG Type DMC 635 V Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time IMMEDIATELY Freight basis EX WORK Price Technical details X-Travel 635 mm Y-Travel 510 mm Z-Travel 460 mm table-size 790 x 560 mm spindle taper ISO SK 40 turning speed range 12000 1/min feeds longditudinal/cross/vertical 1 - 30000 mm/min Rapid motion -longitudinal/cross/vertical 30 m/min No. of Tools in Magazine 20 workpiece diameter at full load 80 mm wotkpiece diameter with 2 vacant positions 140 mm Workpiece length 300 mm Weight of tools max. 7 kg table load 600 kg spindle drive 9 / 11 kW control HEIDENHAIN TNC 530I total power requirement 30 kVA Additional information cnc HEIDENHAIN I TNC 530 MAGSIN POSITIONS 32 SK 40 El ...

x-travel: 600 mm y-travel: 410 mm z-travel: 520 mm Spindle Speed: 8000 U/min. table length: 840 mm table width: 420 mm engine output: 15 kW tool change unit: 16 control: SIEMENS 810 shopmill rapid traverse X- and Y-axis: 36 m/min rapid traverse Z-axis: 20 m/min taper ISO: SK 40 dimensions: 2200x2300x2300 mm weight: 2500 kg Youtube-Video-Links: https://www.youtube.com/watch?v=lGP4FX8j_Gg https://www.youtube.com/watch?v=WSiuzCJw6G4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Zellschneider photovoltaic solar cells. 5000 whole cells from the front per hour. 10000 half cells from behind per hour

Technical data and equipment: Travel X/Z - X2/Z2: 270/750 // 205/750 mm Travel Y: 100 (+-50) mm Max. rod diameter: 65 mm Main spindle drive: 0 - 5000 rpm Sub-spindle drive: 0 - 7000 rpm Tool holder: VDI 30 Control: Siemens Sinumerik 840 PL Revolver: 2 pcs. for applied Tools (12 slots each) Turret: Upper turret is equipped with Y-axis Spindle: 2 pcs main and counter spindle with C-axis Accessories for the machine: - Bar feeder Irco Profimat 70.6/270.6 - Internal cooling - Driven tools (straight and angled) - Chuck for main and counter spindle -Suction -Conveyor - Pick-up device with outfeed conveyor - KSS system Knoll SF 1000/Turbo-1 - Various holders approx. 80 pcs VDI 30 - Drill rod holder - Muzzle holder Machine space requirements: 3400 x 2600 x 2300 mm // 7600 kg

Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)

Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)

Dough sheeter from Fritsch Model Rollfix with reel immediately available in the warehouse in Bielefeld. Pictures are without tapes but the machine is sold with new tapes. - Belt width 64cm - with reel - With digital computer control

max. turning diameter 500 mm max. turning length 1400 mm 12-station turret not driven

In excellent working condition, fully refurbished bun rounder Eberhardt Piccolo 4 can divide and process even the most sticky, soft dough. – Easy to clean, removable top cover – Rust-resistant light metal cutting head – Dimensions 6359134 cm – Power 0,55 kW – Voltage 400 V, amperage 1,7A – 30 divisions, processing 40-135 g dough pieces – 3 moulding plates included

Frequency-controlled drive motor UNGERER Drive test bench Power 0.0540 to 16.4 KW Voltage 28-420 V Speed 10 to 3,000 rpm adjustable motor with - Siemens frequency inverter with SIMOREG K controller - External fans Emergency Out Facility Hand control unit Frequency: Type: SIMOREG K Power 6 KW to 774 KW

Vertical machining center LEADWELL MCV 610 CR CNC Fanuc 0M X 610 Y 510 Z 410 6000RPM ISO 40 The machine is in our warehouse in Gussago BS, under power Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 610, Y axis: 510, Z axis: 410, CNC type: Fanuc, Spindle revolutions: 6000

Ex-Cell-O XG620, Excello XG 620, Siemens CNC overhauled 2011, docs available, ball groove milling for constant velocity joints, This machine can be inspected in our warehouse in Gussago BS Italy (Milan Area)

MELCHIORRE Sp3 / 600 4 rings copper plate, rings with ceramic inserts, diamond lapping lapping machine Under power in our warehouse in Gussago BS Mimu machine tools, Lapping is a [machining](en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](en.wikipedia.org/wiki/Glass) against a surface such as [iron](en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](en.wikipedia.org/wiki/Jeweller%27s_rouge), [opticians rouge](en.wikipedia.org/wiki/Cerium(IV)_oxide ...

x-travel: 800 mm y-travel: 630 mm z-travel: 710 mm Control: Siemens type: 840Dsl Number of spindles: 2 St. turning speeds: 30-12000 U/min tool taper: HSK 63 Tool changer: 80 Pos. Feed: 1-40.000 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Doppelwendespanner Maschinennummer 0552.80.00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: VDI 40 weight: . kg material: . Approx. 49 pieces The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 6300 mm y-travel: 2200 mm workpiece height: 1835 mm Table area: 6000x1835 mm Rest: 2 Side head: 2 number of T-slots: 7 T-slot - distance: 240 mm T-slot - width: 28 mm bed length: 14650 mm column daylight: 2075 mm feed: 5-60 m/min workpiece weight: 15000 kg total power requirement: kW weight of the machine ca.: 55 t dimensions of the machine ca.: 14,65x4,37x4,05 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: VDI 40 weight: . kg material: . Approx. 60 pieces The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 630 mm turning diameter over slide rest: 380 mm turning length: 400 mm spindle passage: 105 mm turning speeds: 24-1800 U/min Rapid travel: steady for max. workpiece diameter from: 340 mm 3 jaw chuck Forckrath: 315 mm throat: 700 mm length of gap: 300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale, it apply only our business and conditions of sale. About Us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 660 mm grinding length: 2000 mm workpiece weight: 1500 kg grinding wheel diameter: 400 mm control: X-As. Diatos 602 total power requirement: 12/22/30 kW weight of the machine ca.: t dimensions of the machine ca.: m Including: With Diamant Wheel / Plunge Grinding With Spark out / Face Grinding The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 630 mm table width: 630 mm table load: . t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transport length: 3400 mm band width: 600 mm dayligth: 600 mm width: 800 mm total power requirement: kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 4x0,8x0,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 630 t passage width: 1390 mm stroke: 400 mm table surface area: 1390x1250 mm total power requirement: 75 kW weight of the machine ca.: 36 t dimensions of the machine ca.: BxTxH 3200x2800x4000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Siemens Sinumerik 840D control system, incl.: Abrasive preparation, hydraulic unit, and portal loading system for loading and unloading the machine, Technical specifications:, Center distance: 600mm, center height: 180mm, maximum grinding diameter: 355mm, maximum workpiece weight: 150kg, maximum Z-axis speed: 11 m/min, minimum Z-axis speed: 0.01 m/min, maximum X-axis speed: 7.5 m/min, minimum X-axis speed: 0.01 m/min, External cylindrical grinding spindle:, Grinding wheel standard (Øa x w x Øi): 600 x 80 x 304.8 mm, Grinding wheel peripheral speed: 5 - 50 m/s, Power consumption of grinding spindle motor: 11 kW, Workpiece spindle:, Taper bore workpiece headstock: MK 5, Power consumption: 2.7 kW, Tailstock:, Taper bore punch point: MK 4, Coolant tank: 2000 liters, lubricating oil: 30 liters, hydraulic oil: 60 liters, Operating voltage: 400 volts, 3 phases, Mains frequency: 50 Hz, Total w ...

Engine Brand: MTU, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Working Hours: 15211 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 580 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 625 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 902 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/mtu-12v2000g25tb-generator-625 kva-used/121, , = More information =, , Empty weight: 5.735 kg, Type number: 12V2000G25TB GENERATOR 625KVA

Engine Brand: JOHN DEERE, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Working Hours: 816 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 125 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator Hz: 60 , Generator Volts: 120/240 , Generator Amps: None , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/john-deere-6081tf001-generator -125kw-used/22422, , = More information =, , Year of construction: 1010, Empty weight: 7.000 kg, Type number: 6081TF001 generator 125KW

Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 96 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 120 , Generator Hz: 50 , Generator Volts: 415/220 , Generator Amps: 167/317 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/used-john-deere-6068tf220-gene rator-130-kva/113, , = More information =, , Year of construction: 1010, Empty weight: 1.475 kg, Type number: 6068TF220 GENERATOR 130 KVA

Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 96 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 120 , Generator Hz: 50 , Generator Volts: 380 , Generator Amps: 182 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/john-deere-6068tf220-generator -120-kva-used/636, , = More information =, , Empty weight: 1.425 kg, Type number: 6068TF220 GENERATOR 120 KVA

Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , Generator KVA: 65 , Generator Hz: 50 , Generator Volts: 230 , Generator Amps: 163.2 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/john-deere-4045tfm50-generator -65kva-used/319, , = More information =, , Empty weight: 1.050 kg, Type number: 4045TFM50 GENERATOR 65KVA

Engine Brand: DORMAN, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Working Hours: 999999 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 279 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 325 , Generator Hz: 50 , Generator Volts: 415/240 , Generator Amps: 450 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/6933, , = More information =, , Empty weight: 6.500 kg, Type number: R325N7 Generator 325 KVA

Engine Brand: DORMAN, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Working Hours: 935 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 200 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 250 , Generator Hz: 50 , Generator Volts: 380/440 , Generator Amps: 380/328 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/6932, , = More information =, , Empty weight: 6.500 kg, Type number: B600B Generator 250 KVA

Engine Brand: DETROIT DIESEL, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Working Hours: 1216 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 60 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 75 , Generator Hz: 60 , Generator Volts: 240 - 416 , Generator Amps: 225 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/detroit-diesel-60ds60-generato r-54-kva-used/22425, , = More information =, , Year of construction: 1010, Empty weight: 3.400 kg, Width: 44 cm, Type number: 60DS60 GENERATOR 54 KVA

Engine Brand: CUMMINS, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 180 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 180 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 260 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/219342, , = More information =, , Empty weight: 2.800 kg, Type number: 6C8.3 GENERATOR 180KVA

Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Working Hours: 35719 Hour(s), Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 113 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 90 , Generator Hz: 50 , Generator Volts: 200 , Generator Amps: 260 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/cummins-6bt5-9-generator-90-kv a-used/26, , = More information =, , Year of construction: 1010, Empty weight: 2.500 kg, Type number: 6BT5.9 Generator 90 KVA

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , Generator Hz: 60 , Generator Volts: 380 , Generator Amps: 0 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/caterpillar-d398-66b-generator -700-kva-used/254, , = More information =, , Year of construction: 1010, Empty weight: 9.000 kg, Type number: D398 66B GENERATOR 700 KVA

Engine Brand: CATERPILLAR, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 522 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 625 , Generator Hz: 50 , Generator Volts: 380 , Generator Amps: 950 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/219337, , = More information =, , Year of construction: 1010, Empty weight: 4.700 kg, Type number: 3412 PC 38S GENERATOR 625KVA

Engine Brand: CATERPILLAR, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 39800 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 600 , Generator Hz: 50 , Generator Volts: 415 , Generator Amps: 835 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/203023, , = More information =, , Year of construction: 1010, Empty weight: 4.970 kg, Type number: 3412 DITA GENERATOR 600 KVA

Engine Brand: DORMAN, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 279 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 255 , Generator Hz: 50 , Generator Volts: 415/240 , Generator Amps: 354 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/6969, , = More information =, , Empty weight: 4.500 kg, Type number: MF/280/DD GENERATOR 255 KVA

Engine Brand: CUMMINS, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 210 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/cummins-6cta-8-3c-cpl1783- new/22420, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.700 kg, Type number: 6CTA 8.3C CPL1783

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: No Flywheel , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 12 Volt , Injection Type: Electronic Fuelpump (EDC) , , https://www.hamofa.com/catalog/product/view/id/292167, , = More information =, , Type: Engine, Empty weight: 1.600 kg, Type number: C13 RRA-6013858

Engine Brand: CUMMINS, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Rated Power: 224 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/292649, , = More information =, , Type: Engine, Empty weight: 1.025 kg, Type number: 6C8.3 CPL1221

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Manufacturer: Winterhalter - Type: GS660 - Heating capacity: 12.0 kW - Connected load: 15.8 kW - Rated current: 25.5 A - Water pressure: 250 - 600 kPa - Water temperature: max. 60°C Dimensions: Width: 137cm Depth: 86cm Height: 177cm