mak engine 6 used for sale

RECON Part Number: 1208 8114 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list.

PROFIBUS, PLC control, connection module for digital electronic modules -Manufacturer: Siemens -Type: Simatic 6ES7 154-1AA00-0AB0 -Number: 1x available -Price: per piece -Dimensions: 130/110/H60 mm -Weight: 0.4 kg

RAFFEL NH3 – 648 m² Brand:RAFFEL Type:NH3 – 648 m² Stock number:M23-2489 Cooling capacity:105 kW Application:Freezing Number of fans:Frieren Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Dimensions:4650 x 2250 x 5080 (5340) mm Number in stock:2 piece(s) Price:Quotation request Description: Nice Raffel Ammonia evaporator with 3 fans. Heat exchange surface is 648 m2. Visit our website: used-refrigeration

PLC control, compact device -Manufacturer: SIEMENS -Type: Simatic S5-95U 6ES5 095-8MA03 -Number: 2 modules available Price: per piece -Dimensions: 145/135/H140 mm -Weight: 1.3 kg

Aerospace telephone system, wireless network -Type: ARLAN 640-2400 -Price: per piece -Number: 18 available -Weight: 0.7 kg/piece

Recon Part Number: 1204 7170 Standard dimension without old stamp Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

FRITZ MÜLLER ZE 625-4 hydraulic press was built in Germany by Fritz Müller GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. The first major overhaul was carried out in 1988 by the manufacturer’s service Machinenfabrik Mueller-Weingarten AG. A second overhaul was carried out in 2020, during which the press was brought up to current safety requirements. As part of this overhaul, a new control system based on a SIEMENS SIMATIC S7 PLC controller and a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel was installed, the entire electrical system was replaced, seals were replaced and light curtains were installed. The FRITZ MULLER ZE 625-4 is an extremely versatile press designed for even the most demanding metal forming operations. It is capable of performing operations such as deep drawing, stamping, forging, straightening large w ...

Technical data for the shelf: Shelving system: SSI Schaefer Type: R 3000 The scope of delivery includes: 01x Shelves, used Material colour: sendzimir galvanised f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight|pcs.: approx. 8,12 kg max. load per shelf 75 kg, with the same load. distributed load. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

32 Sulzer TW11 130” narrow single colour and MW Serial 45000 to 69000 18 machine MW 14 machine single colour Accessories Per Loom 6 Harness shafts 6 Frames 6 Cam Heald wire, and dropper as one machine 1 Beam 1 Cloth role 1 IRO Looms are running and in very good condition

Technical data for the shelf: Shelving system: SSI Schaefer Type: R 3000 The scope of delivery includes: 01x Shelves, used Material colour: sendzimir galvanised f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 590 mm Total height: approx. 30 mm Frame profile: approx. 25 x 25 mm Mesh size: approx. 68 x 50 mm Weight|pcs.: approx. 6,90 kg Note: Water permeable (up to 70%), suitable for sprinkler systems and thus optimized fire protection. Air-permeable – allows good air circulation, e.g. in deep-freeze warehouses. Translucent – creates a bright working environment in the warehouse. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated ...

• Automatic operation, product feed horizontal, box feed vertical • Folding box format range w 15-140 x h 10-70 x l 45-140 mm depending on format inserts (data not binding, exact statement after receipt of customers folding box sample) • for both sides flap closure by hot glue with hot melt device Nordson ProBlue 4 • Output max. 55 cycles/min • Product infeed conveyor with grouping and stacking station for small carton in infeed direction w 22 x h 9 x l 70 mm • Embossing unit for flap opposite insertion side with 2-line embossing stick • Outfeed conveyor with stacking chute for filled folding cartons • Available format sets for folding box sizes w 75+70, h 21+12 mm (depth adjustable without format) • Teachbox for checking the function of the closing tools • PLC Siemens S7-300 CPU 314 with operator terminal Siemens Simatic OP 3 • Connection 400/230V/50Hz

Drive : 75 KW Dimensions : L 3800 mm x W 1600 mm x H 2200 mm Weight : 3900 kg.

1 fixed setting stick with roller quills 1 moving setting stick

Used gearboxes Reduction 4:1 Input shaft counterclockwise Output shaft counterclockwise

PlateExakt 600 - Cliché mounting device/die-cutting cylinder  Age: 2019  Raantec  Mounting device  cliché mounting device which is exclusively designed to, the cliché or the die-cutting plate onto the impression or die-cutting cylinder safely, precisely and quickly cylinder. The device has two high-resolution USB cameras that can be moved linearly on a precision guide. precision guide. Synchronised via the centre and individually adjustable by means of a handwheel for different printing widths.  Max. diam.: 227"  Min. diam.: 60"  Width: 620mm

Key data: 600 mm, 1500 mm

The lathe allows the operator to choose between manual, automatic or combined operation. With the intuitive software, the operator can effortlessly program operations and cycles up to the finished part. Specifications: Circulation diameter over bed: 600 mm, Circulation diameter over carriage: 400 mm, Bar passage: 80 mm, Drive power: 11 KW, spindle speed in 3 gear stages 8-2,000 rpm Standard accessories: Rapid traverse for longitudinal and flat, electronic handwheels, foot brake, Multifix "C", 3-shoe chuck 250 mm

Drilling diameter 3-25 mm in ELB Drilling depth in one stroke (mm) 810 with resetting 1,200 Tapping up to M20 – larger by milling Manual tool changer Spindle holder SK 40 altv. HSK 63 Drive power 5.5 kW / ED 100 Travel X (longitudinal) 1,050 mm Travel Y (vertical) 800 mm Table load up to 2,500kg Table size 1,000 x 1,500 mm CNC rotary table 0-360° manual

58 Mw MAN 18V48/60TS power plant 50 Hz 3 x Man 18V48/60TS generators together with auxilary equipments Approx 4000 Working hours each 58 Megawatts total power 19305kw each at 500 RPM and 50 Hz Engines year of build 2014 with ABB AMG1600UU12 DSE Alternators Alternators year of build 2015

12 galvanized conveyor belts, belt width 650 mm, capacity 150 to 200 t/h Lengths from 8 meters to 60 meters Left - clockwise rotation, with traction drive 037 KW Tel. 01715213204

Syspal fully enclose tote bin tipper Fully working 16a 3 phase plug 2m tip height All failsafes

The offered enrobing machine is in very good condition. It is currently still in use and can be viewed on site. Further information is available on request. The pressing machine that can be seen at the end of the production chain is not part of this offer, but is also for sale (see our other listings).

Book spine punching machine Schmedt Präcut HHS 6501; good condition; cleaned and tested; Block height max.350mm; Block thickness max.90mm; 3 knives. Book block spine machine Schmedt Präcut HHS 6501; good condition; cleaned and checked; max.block hight 350mm; max.block thikness 90mm; three knives.

End mill, end mill, cutter, shell cutter -Manufacturer: Reishauer, end mill with longitudinal groove, 2 pieces -Type: Comol 80x45x27 Orion 63x40NF Sp450 HSSE -Hole: Ø 27 mm -Price/Fee: complete -Transport dimensions: 145/80/H45 mm -Weight: 1.2 kg

Control load switches, RCBOs, motor protection switches, reversing switches -Type: CG8 D-V226-602 FS1 -without: gearshift knob Price: per piece -Number: 24 switches available -Weight: 0.6 kg

Recon Part Number: 0208 8696 - with old acceptance (Part number without acceptance : 0407 9093) Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Cutting height: 60 mm saw-blade dia.: 350 mm Motor output: 5,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Geared motor, electric motor, electric geared motor -Manufacturer: Ametek, geared motor -Transmission: with toothed belt pulley -Speed: rpm -Engine: Ametek 18323 6330620005 -Voltage: 220/240V -Dimensions: 125/85/H160 mm -Weight: 1.7 kg

Brand SKF Type 6202-Z/QE6 Year of construction: Unused Weight (Kg) approx. 9400 large / 8780 net Number of units in stock 193.200 ( approx) Made in France Comments Contact us for min. quantity Verkoopcondities Contact us for min. quantity

Little Run Leybold Scrollvac SC60D Scroll Pump. Immediately available. 3 months warranty.

Brand NSK Model: 6203 C2 Year of construction: Unused Weight (Kg) approx. 12460 large / 11880 net Number of pieces in stock 170.280 ( approx) Made in Japan Comments single row deep grove ball bearing , packaging by 360 pieces in carton Terms of sale Please contact us for min quantity

Key data: 299 mm, 620 mm, 150 mm

Technical data of the machine: - Workpiece headstock: MK5 - Tailstock: MK3 - Center height: 150 mm - Center width: 680 mm - Grinding length: 620 mm - Grinding wheel left: 350 x 50 x 127 - Grinding wheel right: 250 x 25 x 127 . Geometry: The machine is completely dismantled up to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the Z and X axes are scraped by hand and restored to a like-new condition. After completion, the machine receives a measurement report according to the manufacturer's specifications Equipment of the machine (standard): • 1 workpiece headstock MK5, swivel • 1 tailstock MK3 • 2 grinding wheel holders • 1 abrasive headstock Ø 127, swivel • 1 hydraulic power unit • 1 set of operating tools and instruction manual The machine and equipment shown in this il ...

Generator Condition: Used – Good condition Power: 600 kVA Availability: Available Description : Diesel generator emergency Generator : Baudoin Range : Canopy Model 600 Engine : Baudoin Type : 6P15.2 Year : 1989 Operating running hours : 500 H Prix 10 000 € HT Delivery available at an additional cost. Price EXW 10.000 € Groupe MMO, European leader in the revaluation of generator sets If you have a specific need or request, contact us: show contacts #4012 #cummins #decarbonisation #perkins #pramac #groupeelectrogene #rachat_groupe_electrogene #revalorisation #achat_vente #sdmo #volvo_penta #aman #caterpillar #renault #johndeere #iveco #poyaud #doosan #mtu #kohler #detroit_diesel #wartsila #jenbacher

Capacity, ton 630 Stroke path till its position where it develops nominal capacity, mm 16 Slider stroke, mm 320 Slider strokes, spm 20 Max. distance between table and slider, mm 800 Distance adjustment between table and slider, mm 180 Table size, mm 1250 x 1250 Slider dimensions, mm 1000 x 1000 Opening in the table, mm 800 x 800 Thickness of bolster, mm 180 Cushion stroke, mm 130 Main motor power, kW 58 Machine dimensions, mm 3280 x 3470 x 6190 Machine weight, kg 55500

Key data: 630 mm, 560 mm, 560 mm

Year of construction 2003 Heidenhain control MC 422 18200 Spindle hours NC rotary table installed in rigid table 1000 x 600 mm Controlled B-axis 24-fold tool changer Workspace Tool holder SK40 Motor spindle 12000 rpm Incl. coolant system, chip conveyor (auger) Top condition! Machine weight 6500 kg Transport dimensions: 3.5 x 2.7 x 2.21 m

New galvanized or painted inclined props 3m, 3.50m, 4.00m at great conditions directly from the factory. From.34,50€/ piece.+ VAT Inclined props new, painted 1,60m - 3,00m = 34,50€/ piece Inclined props new, painted 2.00m - 3.60m = 35.50€/ piece Inclined props new, painted 2.20m - 4.00m = 38.50€/ piece Inclined props new, galvanized 1.60m - 3.00m = 38.90€/ piece Inclined props new, galvanized 2.00m - 3.60m = 40.90€/ piece Inclined props new, galvanized 2.20m - 4.00m = 42.90€/ piece Frame for props new, painted 70,00€ European joint product. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NUMBER: DE279047055 Office/ Storage Address: Company SFS Ulmer Str. 1 89614 Öpfingen Ulm Registration ...

Bendi forklift in lovely condition. Manufacturer rebuild in 2015. New charger 2015. 5.5m lift. Available immediately, viewing possible in Milton Keynes, UK.