mak engine 6 used for sale

Motor clamping rails, motor clamping rails, motor clamping system, for electric motor, gear motor -Motor tensioning rail: 2 pieces -Groove width: 20 mm, length 470 mm -Hole spacing: 555 mm / Ø 20 mm -Delivery/Price: complete -Dimensions: 600/60/H50 mm -Weight 4.2 kg/piece

Motor clamping rails, motor clamping system, for electric motors, geared motors -Motor tension rail: 2 pieces -Groove width: 17 mm, length 400 mm -Hole spacing: 580 mm / Ø 15 mm -Sale/Price: complete -Dimensions: 630/68/H85 mm -Weight 12.4 kg

Heating, gas and oil burners, gas burner control, gas relay, control box, burner control, burner management, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: Mertik, pressure regulator type 654 -Type: 654 -Total dimensions: 120/90/H160 mm -Weight: 0.9 kg

Linear bearing, linear rail, linear guide, guide rail, linear guide rail, profile rail, slide rail -Guide rail: Linear guide rail, wedge-shaped -Rail length: 640 mm -Total width: 37 mm -Rail height: 20/10 mm -Dimensions: in the pictures -Dimensions: 640/37/H20 mm -Weight: 2.1 kg

Dovetail guide wedge bar, linear bearing, linear rail, linear guide, guide rail, linear guide rail, profile rail, slide rail -Guide rail: Linear guide rail, wedge-shaped for dovetail guide -Rail length: 620 mm -Total width: 31 mm -Rail height: 15/3 mm -Dimensions: 620/31/H15 mm -Weight: 0.8 kg

Sensor, write head, read head, write-read head, read-labeling station -Manufacturer: Siemens, Moby-M reading and labeling station LBS-32 Ovp -Type: 6AW5454-8BH -Dimensions box: 150/40/H40 mm -Weight: 0.2 kg

Reamer, twist drill, drill bit -Manufacturer: Werkö, twist drill Ø 66.0 mm -Recording: MK5 -Type: Two-cutter 66.0 x 630 HSS -on request: different sizes/quantities available from additional stock -Transport dimensions: Ø 66 x 780 mm -Weight: 10.6 kg

power converter, power supply, power pack, switching power supply -Manufacturer:Siemens, SITOP Power 10 -Type: 6EP1434-2BA00 -Input: 3AC 400- 500V 50/60 Hz -Output: 24 V DC / 10 A -Quantity: 1 piece available -Dimensions: 280/100/H140 mm -Weight: 2.0 kg

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK50 holder 2 pieces -Type: 50 x 27 x 630 mm -Dimensions each: Ø 100 x 845 mm -Price/Delivery: complete -Transport dimensions: 845/200/H100 mm -Weight: 21.2 kg/total

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK50 holder -Type: 50 x 50 x 630 mm -Dimensions: Ø 100 x 850 mm -Weight: 23.5 kg

pneumatic cylinder, flat cylinder, pneumatic drive, piston, flat cylinder -Manufacturer: Festo, flat cylinder type DZH-50-600 PPV-A -stroke: 600 mm -Piston rod: Ø 20 mm / M16 x 1.5 -Pmax: 10 bar -Quantity: 2 pieces -Price: per piece -Dimensions: 780/145/H50 mm -Weight: 7.4 kg/piece

Sensor module, incremental encoder -Manufacturer: Siemens, Sinamics Sensor Module SMC20 from vertical lathe Scherer VDZ 80 DS -Type: 6SL3055-0AA00-5BA1 -Number: 3x module available -Price: per piece -Dimensions: 115/50/H170 mm -Weight: 0.8 kg/piece

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: Conveyor belt conveyor belt unused -Width: 140 mm -Length: 6 m -Transport dimensions: Ø 660 x 140 mm -Weight: 5.9 kg

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: Conveyor belt, transport belt, unused -Width: 140 mm -Length: 6 m -Dimensions: Ø 240 x 145 mm -Weight: 3.2 kg

try square, locksmith square, hair square, precision hair square -Manufacturer: USSR, stop angle 1000 x 633 -Type: ROCT 3749-65 -Dimensions: 1000/633/33 mm -Weight: 12.4 kg

Line chokes, line filters, frequency converters, drive inverters, line filters. Smart Line Modules -Manufacturer: Siemens, Line choke Line Filter for 36kW -Type: 1P 6SL3000-0BE23-6AA0 -Voltage: 480/275V, 45-65Hz, 67A -Dimensions: 530/245/H130 mm -Weight: 14.2 kg

Winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: GHD Görlitzer Hanf

Winch rope, crane rope, lifting rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: WDI Python, crane rope winch rope Ø 22 mm -Rope type: 6x36WS -Length: 82 m -Number: 6 wire rope drums available -Price: per drum -Transport dimensions: Ø 850 x 490 mm -Weight: 192 kg/piece

grinding drum, deflection drum, belt sander, belt grinder, drum sander -Manufacturer: KED Kurt Ehemann, grinding drum drum width 640 mm -Drum: Ø 340 mm -Record: Ø 77 x 445 mm -Quantity: 5x drum available -Price: per piece -Dimensions: Ø 340 x 640 mm -Weight: 82.0 kg/piece

Oil conveyor, hose reel, automatic hose reel, oil hose reel, hose unwinder, tank hose reel, wall reel -Hose reel: Automatic hose reel -Hose length: 6600 mm -Dimensions: 740/150/H52 mm -Weight: 22 kg

conveyor belt, belt conveyor belt, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: Round wire link belt made of stainless steel -Width: 610 mm -Length: 3480 mm -Transport dimensions: Ø 240 x 610 mm -Weight: 22.1 kg

Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Holz-Her, nail strips 2 boxes / approx. 8000 pieces -Type: 2.8 x 65 H/BK -Art.No.: 25 6714 -Price/Delivery: complete -Transport dimensions: 370/260/H250 mm -Total weight: 27 kg

Simodrive choke 3-phase choke for PLC control, mains filter, line filter, Simodrive choke transformer -Manufacturer: Siemens, Drossel -Choke: Type 6SN1111-0AA00-0CA0 -Dimensions: 330/150/H240 mm -Weight: 16.5 kg

Stop for press brake, bending machine, guillotine shears ..., cross table -Stop: for press brake, bending machine, guillotine shears ... cross table -Hole: Ø 60 mm / bolt circle 75 mm M6 -Dimensions: see photos -Dimensions: 630/190/H185 mm -Weight: 8.8 kg

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 62391 - Klipper 18/13 / BR 36mm , koddiert, für FCA 80, FCA 3430-18,FCA 3461, 3462, 3463 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Used dissolver Kofama MD600. New 1980.

Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley -Manufacturer: Würth, workshop trolley, sturdy tool trolley -12 drawers: lockable, see photos for layout -Dimensions total: 680/460/H1045 mm -Weight: 70 kg

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 62147 - Clipper 18/11-12 / br 36 mm, single-sided coded for FCA 3461, 3462, 3463 , FCA 3430/18 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Transnorm Rising falling Incline belt conveyor GF 7200-600-500 RA2053 Technical data: Conveyor length (NL): 7200 mm (3800 mm + 3400 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7200 Nominal / outsid ...

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders, lifting power jacks -Manufacturer: Milwaukee, double-acting hydraulic cylinder stroke 600 mm -Type: H-73 -Piston rod: Ø 16 mm -Holes: Ø 25 mm / Ø 18 mm -Dimensions: 885/220/H180 mm -Weight: 16.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 630 mm -Type: B1-50/32x630/0 TGL10906 -Piston rod: Ø 32 mm -Dimensions: 805/115/H115 mm -Weight: 13.4 kg

plastic belt for blocks of max. 600 x 600 mm belt width 600 mm adjustable outfeed height ± 1.900 mm + 500 mm infeed height : ± 800 mm total dimensions : ± 3.900 x 1.000 x 1.900 mm + (500mm adjustable) adjustable speed mobile

Lippert belt conveyor GF 1090-650-500 RA1425 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1090 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB-5E Year of construction: 2 ...

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 678 mm -Piston rod: Ø 30 mm -Holes: Ø 20 mm / distance retracted 810 mm -Dimensions: Ø 60 x 870 mm -Weight: 11.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 630 mm -Type: S2-50/32x630 /0 TGL10906 -Piston rod: Ø 32 mm -Dimensions: 805/115/H115 mm -Weight: 13.3 kg

Transnorm belt curve conveyor left GKF 70° degrees-770-600 IR600 RA1415 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length middle radius (NL): 1100 mm Frame width (NB): 770 mm with Motor 940 mm be ...

Transnorm conveyor belt GF 2300-600-500 RA2057 Technical data: Conveyor length (NL): 2300 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2300 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentral ...

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, magnetic holder, magnetic table -Manufacturer: Thyssen, magnetic table with pipe holder -Type: 105 662 -Pipe diameter: 45 mm -Dimensions: 220/180/H260 mm -Weight: 13.3 kg

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, magnetic holder, magnetic table -Manufacturer: Thyssen, magnetic table with pipe holder -Type: 105 662 -Pipe diameter: 42 mm -Dimensions: 150/130/H245 mm -Weight: 5.3 kg

Try square, locksmithsquare, hair square, precision hair square -Stop angle: leg length 600 x 300 mm -Dimensions: 605/300/H40 mm -Weight: 2.8 kg

Transnorm conveyor belt GF 22980-700-600 RA2064 Technical data: Conveyor length (NL): 22980 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor R27 DT90S4/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 22980 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Conveyor speed m / s:  ...

Transnorm rising falling Incline belt conveyor GF 6000-600-500 RA2066 Technical data: Conveyor length (NL): 6000 mm (4200 mm + 1800 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,33 Drive: SEW gear motor, R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 6000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engin ...

Transnorm belt conveyor GF 5100-700-600 RA2105 Technical data: Conveyor length (NL): 5100 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): Frequency converter for stepless speed control Drive: SEW gear motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 1994 Optionally available: Supports Side guide on one side and on both sides Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 5100 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Movi-Mot KW: 0,37/S1 Ampere: 1,30 Conveyor speed m / s: freel ...

V-belt pulley, belt pulley -Diameter: 630 mm -Belt: 1 -V-belt width: 25 mm -Hole: Ø 32 mm -Weight: 29.5 kg