mak engine 6 used for sale

PLC control, power module, LT module -Manufacturer: SIEMENS -Type: Simodrive 6SN1123-1AA00-0HA1 -8 A -Number: 2x available -Price: per piece -Dimensions: 480/50/H290 mm -Weight: 5.77 kg

PLC control, carrier module, universal empty housing -Manufacturer: SIEMENS -Type: Simodrive 6SN1162-1AA00-0AA0 -Width: 50 mm -Number: 2x available -Price: per piece -Dimensions: 480/50/H290 mm -Weight: 3.4 kg

MAHO C Axis Machine Table - Table diameter: 600 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Electrode welding machine Manufacturer Kemppi Type TYLARC653 Power 650 amps at 35% ED, 545 amps at 60% ED 465 amps at 100% ED Power connection 400 Volt Weight approx. 300kg Machine ready for demonstration under power. Shipping on Euro pallet possible.

Corning 048E88-611-31-29 MIC Unitized Tight-Buffered Cable, Plenum, 48fibres,OS2. The roll weighs just under 300kg. Specifications General Specifications Environment Indoor Application General Purpose Horizontal, Vertical Riser, Plenum Cable type Tight-Buffered Product type Distribution Flame rating Plenum (OFNP) Fibre Category single-mode (OS2) Temperature Range Storage -40°C to 70°C (-40°F to 158°F) Installation and assembly 0 °C to 60 °C (32 °F to 140 °F) Operation 0°C to 70°C (32°F to 158°F) Cable Design Central Element Jacketed GRP Fibre Count 48 Number of Active Tubes 8 Subunit Colour yellow Subunit Diameter 4.40 mm (0.17 in) Tight buffer colour subunit Blue, orange, green, brown, grey, white Tensile Strength Elements and/or Armouring - Layer 1 Dielectric strength members Number of ripcords 9 Outer jacket material Flame-retardant Ou ...

PLC control, power module, LT module -Manufacturer: SIEMENS -Type: Simodrive 6SN1123-1AA00-0EA1 -Power: 160 A -Dimensions: 290/150/H480 mm -Weight: 11.6 kg

REF-2258 ANGELUS 60L AUTOMATIC CAN SEAMER WITH 6 SEAMING HEADS AND 24-VALVE VACUUM FILLING MACHINE Automatic can seamer with 6 seaming heads. Manufacturer: Angelus. Model: 60L. Can size: ø73mm. Complete with a 24-valve vacuum filling system (the vacuum pump is included). Overall dimensions: width 2,400mm, length 4,000mm, height 2,600mm.

PLC control, line filter, line filter -Manufacturer: Siemens -Type: Simodrive 6SN 1111-0AA01-2EA0 -Line filter: for regulated feed -Power: 80 kW -Sine wave operation block current operation -Dimensions: 275/200/H480 mm -Weight: 23.1 kg

PLC control, power module, LT module -Manufacturer: Siemens -Type: Simodrive 6SN1123-1AA00-0DA1 -Power: 80 A -Quantity: 2 pieces available -Price per piece -Dimensions: 290/100/H480mm -Weight: 12 kg/piece

PLC control, central assembly, work memory, CPU -Manufacturer: Siemens -Type: Simatic S7 6ES7 414-3XJ04-0AB0 -CPU: 414-3 -Dimensions: 210/50/H290 mm -Weight: 1.3 kg

Available for sale 1365 kW MWM TBG 620 V16 inside container. Equipment in good working conditions.

Available for sale 1 x 3500 kW MWM TBG 632 V16. Equipment in good working conditions.

Available for sale 1365 kW MWM TBG 620 V16 K. Equipment in good working conditions.

Sensor module -Siemens: Sinamics Sensor Module -Type: SMC20 6SL3055-0AA00-5BA2 -Dimensions: 115/30/H165 mm -Weight: 0.4 kg

PLC control, PLC subrack -Type: Simatic S7 6ES7400-1JA01-0AA0 SIMATIC S7-400 -Subrack: UR2 -centralized and decentralized: with 9 slots -2 redundant power supplies: pluggable -Dimensions: 290/260/H27 mm -Weight: 1.49 kg

PLC control, digital output, digital output -Manufacturer: SIEMENS -Type: Simatic S7 6ES7 422-1BL00-0AAO -Number: 1x module available -Price: per piece -Dimensions: 25/210/H290 mm -Weight: 0.82 kg

PLC control, Siemens Simatic Net CP Profibus, communication processor -Type: 6GK7443-5DX03-0XE0 -Communication processor: for connecting Simatic S7-400 to Profibus -Dimensions: 290/210/H25 mm -Weight: 0.71 kg

Available for sale 1400 kW MWM TBG 620 V16 K. Equipment in good working conditions.

Hacker TH 250/650 with metal detector, sieve..

3,85 LF WIDE SPAN RACKS 60CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 60 cm L : approx. 3,85 m Shelf offer consisting of: 03 x frame approx. 200 x 60 cm, disassembled. 16 x traverse approx. 185 cm. 08 x Contact back approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 425,00 € net plus legally valid VAT You will receive an invoice with VAT.

Replacement blades for cutting machines -Knife size: 205x125x1.47 -Type: 676 FB99262 -Number: 18x available -Price: per piece

Available in stock 1 x Used Injector Nozzle Test Stand. Use the injector nozzle test stand to verify the shape and atomization of the injected test fluid and to leak test the needle seating. The equipment is used but in good working conditions.

ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine was built in 2008 in Poland. The machine is used to cut pre-programmed shapes in details having a maximum thickness of 38 mm (carbon steel) or 20 mm (aluminium and stainless steel). A powerful HYPERTHERM HyPerformance HPR 130 laser source with a power of 130 A is used for the cutting process, allowing extremely precise and accurate machining to be achieved. The plasma cutting machine has a solidly built work table with a length of 6000 mm and a width of 2500 mm, which can be extended by means of an additional control panel. The plasma cutting machine is also equipped with FASTCAM CAD/CAM software for simple and effective programming of the cut shapes, and a modern HYPERTHERM EDGE CNC controller, which allows for full control of the machine. Characteristics of the ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine - working area  ...

Rated power at 50%ED: 42kVA Short circuit current: 26kA Electrical force max.: 660daN Projection: 500mm --- equipped with: - 10m hose package - Special electrode arms 500mm, straight - Double stroke cylinder - Spring tension Control + cooling system on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Replacement blades for cutting machines -Knife size: 205x63x1.47 -Type: 675 FB99261 -Number: 5x available -Price: per piece

Three-phase motor, electric motor -Power: 4 kW -Speed: 960 rpm -Shaft: Ø 38 mm -Design: B5 -Hole circle: Ø 213 mm -Recess: Ø 180 mm -Flange: Ø 250 mm -Protection rating: IP 44 -Dimensions: 487/325/H252 mm -Weight: 60kg

Available in stock 1 x Used GrimmerSchmidt Compressor. The compressor was installed in a biogas valorization plant that stopped working. Now the equipment is stored in our warehouse. The equipment is used but in good working conditions. RPM: 6600 RPM Flow: 30 CFM Rating: 80 psig Main Motor Voltage: 460 / 380 V Main Motor Frequency: 50 Hz Main Motor Horsepower: 7.5 hp

electric motor, three-phase motor -Power: 0.18 kW -Speed: 2800 rpm -Shaft: Ø 14 mm -Design: 14 -Protection class: IP 54 -Quantity: 1 available -Dimensions: 245/163/H155 mm -Weight: 5 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 3 to 24 mm -Load capacity: 1600 kg -Number: 1x terminal available -Price: per piece -Weight: 14 kg/piece

The scope of delivery includes: 01x roller conveyor stand, used Total width with base plates: 475 mm Frame width: approx. 445 mm Minimum height: approx. 640 mm Maximum height: approx. 870 mm Total depth with base plates: approx. 160 mm Frame profile illustration: C 80 x 35 x 12 mm Connection strut fig.: approx. 380 x 60 x 50 mm Mounting plate abm.: approx. 140 x 135 x 3.00 mm Borehole Ø: approx. 9 mm Borehole distance: approx. 100 mm Material thickness frame profile: approx. 2.50 mm Material color: sendzimir galvanized

V-belt pulley, pulley -for compressor with blades -Diameter: 620mm -Strap: 2 -V-belt width: 13 mm -Receptacle cone: 17/25 mm long -Weight: 18kg -only one piece available

The scope of delivery includes: 01x roller conveyor stand, used Total width with base plates: 275 mm Frame width: approx. 245 mm Minimum height: approx. 660 mm Maximum height: approx. 900 mm Total depth with base plates: approx. 160 mm Frame profile illustration: C 80 x 35 x 12 mm Connection strut abm.: approx. 180 x 60 x 50 mm Mounting plate abm.: approx. 140 x 220 x 3.00 mm Borehole Ø: approx. 9 mm Borehole distance: approx. 100 mm Material thickness frame profile: approx. 2.50 mm Material color: sendzimir galvanized

Labeller, make Krones, type: Universella 600-15-8-6-130, 2 aggregates for cold glue label at body, shoulder, back; Videojet dating built 1995

Projection: 610 mm Installation height: 340 mm Working height: 1015 mm Table size: 600 x 500 mm Table size additional table: 220 x 500 mm Band saw blade length: 3970 mm Cutting speed, infinitely variable: 20 - 85 / 120 - 500 m/min Band saw width: 3 - 16 mm Table tiltable, 4 directions: 15° Main engine power: 1.5 kW Connected load band welder: 2.4 kVA Weight, approx.: 700 kg Equipment: - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light . LED speed indicator - Blow-out device -CE

Specifications: Model: RNR 20-600 Machine No.: 8266 Item no.: 511061 Year of construction: 2021 Working range: Radius 1800mm RPM speed: 600+170 (with intermediate gear) Torque in Nm: 19/67 Recording: Gr. 2 Ø 31 Capacity St.40: M3-M20 Air consumption approx.: 650 l/min Required air pressure: 7kgr/cm2 Standard - Pneumatic motor (pot make: Ingersoll-Rand) - Engine lubrication - Pressure reducing valve and moisture separator - Quick-change mount for e.g. Bilz thread holders - Flange for mounting on the table - Microspray system for thread cutting (integrated in the machine head) Accessories: - 1x 2-1 reduction - Thread cutting holder with slip clutch for the following threads: 1 / Ø 19 2/ Ø 31 M4 Ø 2.8 ■ 2.1 M8 Ø 6 ■ 4.9 M5 Ø 3.5 ■ 2.7 M10 Ø 7 ■ 5.5 M6 Ø 4.5 ■ 3.4 M12 Ø 9 ■ 7 M14 Ø 11 ■ 9 M16 Ø 12 ■ 9 M18 Ø 14 ■ 11 M20 ...

Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of construction: 2007 Control: MC 4 Clamping unit: Clamping force: 650 t Opening distance: 1150 mm Tool installation height min.: 600 mm plate spacing : 1750 mm Tie bar distance (h x v): 1100 x 900 mm Panel dimensions (h x v): 1510 x 1370 mm Centering (nozzle ejector plate): 200 / 200 mm 1.Injection unit: Screw diameter : 80 mm Injection weight in hp. Max. : 1400 g Displacement: 1543 cc Injection pressure: 2205 bar 2. Injection unit: Screw diameter: 45 mm Injection weight in polystyrene: 278 g Displacement: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x Air valve 16-fold cascade 3 x core pull on BWAP 3 x core pull on FWAP 20 x hot runner control units Robot interface: Euromap 67 Metrics: Total weight: 34,500 kg Total size L x W x H: 7.8 x 2.5 x 2.5 m Operating hours: 45400 h  ...

Gear motor, electric motor, electric gear motor -Speed: 24/48 rpm -Power: 0.15/0.2 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 335/170/H180 mm -Weight: 12.1 kg

grinding diameter: 350 mm grinding length: 600 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±10 ° longitudinal feed of the table: 1100 mm table speeds: 0,02-6 m/min : 130 kg cross travel: max. 270 mm : 130 inkl. Spannung kg : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service  ...

Bitzer shock freezer, freezer unit with evaporator and switch box

geared motor, electric motor -Speed: 61/122 rpm -Power: 0.11/0.15 kW -Design: B3 -Shaft diameter: Ø 16 mm -Protection class: IP 54 -Number: 1x geared motor available -Dimensions: 330/130/H190 mm -Weight: 10.1 kg

Gear motor, electric motor, three-phase motor -Speeds: 120 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Dimensions: 335/175/H180 mm -Weight: 11.1 kg

Bending tool, die, upper knife, upper tool, straight tool -Transfer in current condition as seen -Tool for: press brake -Tool: 45° -Thickness: 25 mm -Total length: 600 mm -Total height: 195 mm -Weight: 20 kg

Engine Make Jenbacher Engine Type 620 Power KW/RPM 2801/1500 Fuel Natural-Gas Generator Model 400 Volts Hz 50 Year of Manufacturing 2001 Running Hours 75.000

Engine Make JENBACHER Engine Type J 616 GS C02 Power KW 1942 KW RPM 1500 Fuel Natural Gas Generator Model Stamford Volts 690 Hz 50 Year of Manufacturing 1999 Running Hours 15.000

Geared motor, electric motor, electric geared motor -Speed: 70 rpm -Power: 0.12 kW -Shaft diameter: Ø 20 mm -Design: B3 angle -Protection class: IP 54 -Dimensions: 305/170/H140 mm -Weight: 9 kg

Manual trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley -Reel for: crane chassis -Drawing with the photos -Chain length: 3600 mm -Quantity: 1x reel available -Price: per piece -Dimensions: 710/250/H220 mm -Weight: 19 kg

Crane grab, hydraulic clamshell grab, hydraulic rotary grab, shell grab, hydraulic grab -Bucket width: 695 mm -Shovel length open: 1720 mm -Total height: 750 mm -Recording: 59 x 65 mm -Weight: 293 kg

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: for lathe -Electrically operated -Max. Speed: 6900 rpm -Admission: M42 x 1.5 mm -Dimensions: 600/390/H355 mm -Weight: 64 kg

Engine Make MWM Engine Type TCG 620 V16 L Power KW/RPM 1358 / 1500 Fuel Gas Volts 400 Hz 50 Year of Manufacturing 1997 Running Hours

Gear motor, electric motor, three-phase motor -Speed: 150 rpm -Power: 0.18 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Brake -Number: 1x engine available -Price: per piece -Dimensions: 500/215/H180 mm -Weight: 26 kg