137,880 used machines on RESALE, but how to find them? Machine Search
Welding bar -from: vacuum device Roschermatic VM 45/2 -Price: per piece -Number: 4 pieces -Length: 635 mm/15 mm/30 mm -Weight: 2.2 kg/piece
Stick electrodes 5.0 x 450 -Type: FOX DUR 600 -Price: per package -Number: 2 packages available -Weight per package: 6.2 kg
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -stable tool cabinet -2x shelves: extendable -Dimensions: 500/600/H830 mm -Weight: 36 kg
Drilling machine Brand: Flott Type: 6STW Technical data: Drill chuck holder: B12 Drill chuck stroke: 40mm Distance from column to drilling area: 180mm Thickness of the column: 50mm Worktop: 180x260mm Motor: 0.9 kW Speed: 1250-8000 rpm Weight: approx. 20kg Note: The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.
PLC control, electronic module -Type: Simatic S7 6ES7 314-1AE01-0AB0 -Number: 1 pieces available (photos) -Price: complete -Weight: 2.2 kg
Stick electrodes 4.0 x 450 -Type: Thyssen 600 Violet W -Price: per package -Number: 14 packages available -Weight per package: 6.2 kg
Three-phase motor, electric motor -Power: 1.5 kW -Speed: 930 rpm -Shaft: Ø 24 x 50 mm -Construction: B3 B14 -Flange: Ø 160 mm -Protection class: IP 33 -Dimensions: 355/260/H195 mm -Weight: 25 kg
x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 spindle turning speed range: 80 - 4000 U/min transmission ratio: 18 feed range: 0,1 - 2000 mm/min rapid traverse: x = 4 / y = 3 / z = 5 m/min table load capacity: 250 kp voltage: 380 V / 50 Hz spindle drive: 5,5 kW total power requirement: 16 kVA weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3,8 x 4,3 x 2,0 m • CNC-control system 432 E • Operating hours: 37719 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 320 mm turning diameter over slide rest: 220 mm turning length: 600 mm turning diameter in the gap: 320 mm turning speeds: 60 - 1650 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 1,1 kW weight of the machine ca.: 340 Kg dimensions of the machine ca.: 1,4 x 0,75 x 0,7 m Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Forage protection Set of change gears Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm Control: Heidenhain TNC 430 total power requirement: 26 kW weight of the machine ca.: 6500 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 630 mm turning length: 2000 mm control: Zyklen gesteuert steady: 2 Stk. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Window transport trolleys, sash transport trolleys, platform trolleys, transport trolleys, heavy trucks, table trolleys, assembly trolleys -Intermediate dimension: mm -Heavy load: transport trolley -Number: 1 piece car available -Price: per piece -External dimensions: 1775/640/H1800 mm -Own weight: 144 kg
Three-phase motor, electric motor -Power: 2.5 kW -Speed: 920 rpm -Shaft: Ø 38 x 80 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 460/330/H260 mm -Weight: 45 kg
angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 120 kW weight of the machine ca.: 78 t dimensions of the machine ca.: 6100 x 5150 x 4300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
mobile workbench, folding workbench, work table, assembly bench -Width: 760 mm -Depth: 695 mm -Height: 840 mm -Number: 1x bench vice -Dimensions: 760/695/H840 mm -Weight: 49 kg
Electric motor, three-phase motor -Power: 0.59/0.74/0.95 kW -Speed: 925/1410/2820 rpm -Shaft: Ø 22 x 60 mm -Construction: B3 -Dimensions: 360/278/H210 mm -Weight: 35 kg
Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -spindle tool -Adjustment: SK50 -Spindle dimension -Number: 2x recordings available -Price: per piece -Dimensions: 158/115/H250 mm -Weight: 7.7 kg
DC brake, braking device, electric motor brake -Manufacturer: AER Statomat -Type: D 6225/V -Current: 200+50 amps -Operating voltage: 380 V AC -Number: 1x power supply available -Price: per piece -Dimensions: 160/215/H155 mm -Weight: 3.2 kg
CNC drawbar, tool holder, tool holder, milling tool holder - Quantity: 28 pieces -with: ring groove -for: SK50 recordings -Thread: M24 - Price: complete -Weight: 6.8 kg
Clamping angle for workpiece clamping -Dimensions: W/H/L 600/405/710 mm -Thickness: 26 mm -Surface: milled -Weight: 167 kg
Complete unit, compact controller, touchscreen, operator panel, display, PLC, Simatic panel PC -Manufacturer: Siemens -Type: SIMATIC C7-633 DP 6ES7633-2BF02-0AE3 -Dimensions: 240/205/H75 mm -Weight: 1.6 kg
Keyboard, control panel, industrial, PLC workstation, programming device -Manufacturer: Siemens -Type: Simatic OP 396 6ES5 396-0UA11 -Dimensions: 150/250/H60 mm -Weight: 1 kg
container volume: 600 l internal dimension: 1500 x 740 x 780 mm dimensions of the machine ca.: 1900 x 810 x 860 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Roller conveyor, roller track, roller track -Roller width: 595 mm -Conveyor length: 1500 mm -Roller diameter: 20 mm -Roller conveyor height: 280 mm -Dimensions: 1500/760/H280 mm -Weight: 44.5 kg
AC Spindle Servo Unit, Servo Amplifier Module, CNC Control System, plug-in card, converter device, -Control comes from a Hitachi Seiki type HC400 machining center -Manufacturer: FANUC -Type: A06B-6055-H108 -Dimensions: 310/500/H300 mm -Weight: 35 kg
1 x used double-sided Rotoles S600 with 2 grinding units and 1x brush Working width 600mmm Speed 60m/min Calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing. Rotoles S calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing.
completely stainless steel suitable thermo-oil heated (300 kW) 12 kW Frying length 7,500 mm Track width 600 mm Top band infinitely variable speed Oil pump Oil level control Suitable for fire protection Filter Dirt transport Lid mechanical lifting device insulated lid Dimensions (L x W x H) : ± 10,900 x 2,000 x 3,500 mm Siemens PLC control type S5 95U+ HMI Simatic OP27 suitable for CIP cleaning + Oil Management System Type VTC 2000 single-walled tank Oil pump Dimensions (L x W x H) : ± 1,700 x 1,1600 x 3,400 mm Oil level indicator
Servo Amplifier Module, CNC Control System, plug-in card, -Control comes from a Hitachi Seiki type HC400 machining center -Manufacturer: FANUC -Type: A06B-6058-H334 -Dimensions: 450/250/H180 mm -Weight: 9.6 kg
x-travel: 6000 mm y-travel: 2000 mm z-travel: 3000 mm Control: heidenhain TNC 415 total power requirement: 34 kW weight of the machine ca.: 31 t dimensions of the machine ca.: 7000 mm m Stocknumber 1110055 Type of machine CNC Floortype milling machine Make ZAYER Type KCU6000 Build in 1992 Type of control Heidenhain TNC 415 X-stroke (mm) 6.000 Y-stroke (mm) 2.000 Z-stroke (mm) 3.000 Speeds (Rpm) 20 - 1.800 Admission in spindlehead BT50 Feeds X (mm/R) 5 - 5000 mm/min Feeds Y (mm/R) 5- 5000 mm/min. Feeds Z (mm/R) 5- 5000 mm/min. Rapid feeds 10.000 mm/min. Total Power (KW) 34 Lenght (mm) 11.000 Width (mm) 2.500 Height (mm) 7.000 Weight 31.000 Kg Additional information Juaristi MG6 turntable: 1500 x 1200 mm Cooling system: 2.5 Bar Tool cooling: 15 Bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Drawers: 2 -Storage: 1 -Brackets for: SK40/SK50 milling holders -Dimensions: 660/1030/H1200 mm -Weight: 190 kg
-Model Colatrice REL 600 -with digital foil keyboard -380 volts -50 Hz -Year of construction 2001
Plasma cutting "CR" 6000x2500 with two Hyperterm HT 2000 and HD 3070 generators complete with filter
AGILENT HP 6890N System Agilent 6890N Gas Chromatogtaph Single FID detector Single Split/Splitless Inlet Agilent / HP 7683 Injector Agilent/HP 7683 Tray PC with preinstalled Chemstation software Refurbished
power converter, power supply, power supply -Type: Sitop PSU300M -Input: 3AC 400 V -Output: DC24V/20A -Quantity: 77 pieces available -Price: per piece -Dimensions: 180/170/H90 mm -Weight: 1.3 kg/piece
Proportional pressure regulating directional valves, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Operating pressure: 0-6 bar -Number: 2x valves available -Price: per piece -Dimensions: 110/45/H55 mm -Weight: 0.4 kg
PLC control -Type: Simatic S5 6ES5430-4UA14 -Simatic DP, decentralized peripheral DP/DP-coupler Coupling module for connecting two PROFIBUS-DP networks, redundant power pricing -Number: 21x available -Price: per package -Weight: 0.3 kg
PLC, control panel, operator panel, control machine -Handover in the current state (broken glass) -The device is sold as working -Manufacturer: SIEMENS -Type: Sinumerik 810D/840D PCU50 -Dimensions: 482/310/H140 mm -Weight: 11.5 kg
Simatic Panel, Operator Panel, Machine Control Panel, Interface Panel, Control Unit -Manufacturer: SIEMENS -Type: Sinumerik 6FC3478-3EF -Dimensions: 420/145/H60 mm -Weight: 0.8 kg
Laboratory power supply, power supply, voltage generator, laboratory power supply -Input: 230 volts AC -Output: 0-30 volts DC -Dimensions: 150/240/H130 mm -Weight: 4.5 kg
Box washer, Fabr. Drill, type: R 20, in VA, with hinge belt transport chain, pump, 2 VA screens, control cabinet, YOC 1989 Box washer, Fabr. Klann, type: 600, with large pump, with screening box with 3 VA screens, YOC 1988, dismantled Box washer, Fabr. Kettner/Sotec, Type: WAH 18, 1,800 Ka/h, with control cabinet, YOC 1990 Prices on request
PLC control -Manufacturer: Siemens -Type: Simatic S7 6ES7331-7KB02-0AB0 -Number: 1x available -Price: per piece -Weight: 0.3 kg
Interface module, PLC control -Type: Simatic 6ES5 316-8MA12 -Number: 1x available -Price: per package -Weight: 0.2 kg
Connectivity box, connection box, PLC control -Type: 6AV6671-5AE11-0AX0 -Number: 3x connection boxes available -Price: per piece -Weight: 0.8 kg
Cylinder cover Recon The cylinder covers were equipped with the following new parts: - Inlet and exhaust valve guides. - Intake and exhaust valve seats. - Inlet and outlet valves. - Nozzle protection tube. - Rotary device. The cylinder covers were tested with 10 bar water pressure. The cylinder covers were planned. The valves ground in with the seats and mounted with new valve stem seals. Price per piece.
High Speed Counter 25/500 kHz, PLC control, counter module, counter assembly -Manufacturer: Siemens, Simatic S5 High Speed Counter 25/500 kHz Ovp -Type: 6ES5 385-8MB11 -Number: 3x High Speed Counter available -Price: per package -Dimensions box: 140/110/H60 mm -Weight: 0.3 kg/piece
PLC control -Type: Simatic S7 6ES7 321-1BL00-OAAO -Number: 39 x available -Price: per piece -Weight: 0.4 kg
maximum number of results exceeded
please refine your search
