126,708 used machines on RESALE, but how to find them? Machine Search
RECON Part number: 1213 7288 + 1213 7778 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Table machine RMH 65 Q for peeling cables. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-65 mm
Ground precision ball screw, D50 x 10/6mm, 892 mm, Eisenmann, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 20070616, D50 x 10/6 mm, 892 mm, Ball screw diameter 50 mm, Pitch 10 mm, Length of thread 615 mm Length of ball screw nut 164 mm, Max. total stroke 451 mm, Total length of the spindle 892 mm Diameter for coupling with motor 40 mm Diameter bearing seat A 40 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit d ...
RECON Part number: 1213 6235 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
10,06 running meters shelf racks, 60cm deep , workshop shelves , storage racks , manual storage , plug-in racks , small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 10,06 running meters Shelf offer 10,06 running meters consisting of: 11 x stand approx. 200 x 60 cm, disassembled (incl. 2 x foot & 2 x cover cap). 50 x base approx. 100 x 60 cm. 200 x shelf holders. 11 x diagonal 1176 mm ( for crossing ). 11 x turnbuckle (for crossing). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1422,00 € net ...
RECON Part number: 1202 7073 / 3.601.0.170.601.4 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
For sale is a cable granulating system. The machine will be available from August. technical data: Voltage: 380V Frequency: 50 Hz Total capacity: 36 kW Weight: 3000kg Dimensions: 3, 5m x 2, 0 m x 2. 8 m Cable diameter: 0.3-20 mm Power: 300 350 kg / h the performance depends on type of cable Operation guarantee: 1 month The cable granulating system is suitable to various kinds of copper cables. The diameter of the cable can have up to 20 mm. Kabelschredder is very easy to operate and is very economical. You can recover up to 99.8% of the copper from the cable. Demonstration machine costs â?¬29,000 gestezliche Net VAT The offered machine is tested prior to sale min a month. New costs â?¬35,000 net On request, we can organise transport. After entering the zip code, we will charge you the delivery cost. To the purchase price, transport costs must ...
RECON Part number: 1213 6967 B-side / F21 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
RECON Part number: 1213-6966 A-side / F7 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
30,06 running meters shelf racks, 60cm deep , Workshop shelves , Storage racks , Hand storage , Plug-in racks , Small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 30,06 m Shelf offer 30,06 running meters consisting of: 31 x stand approx. 200 x 60 cm, disassembled (incl. 2 x stand & 2 x cover cap). 150 x floor approx. 100 x 60 cm. 600 x shelf holders. 31 x diagonal 1176 mm ( for crossing ). 31 x turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 4199,00 € net plus lega ...
RECON Part number: 1230 2775 for diesel engine ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
5,06 m shelving racks, 60cm deep , Workshop shelves , Storage racks , Hand storage , Plug-in racks , Small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 5,06 m Shelf offer 5,06 running meters consisting of: 06 x Stand approx. 200 x 60 cm, disassembled (incl. 2 x stand & 2 x cover cap). 25 x floor approx. 100 x 60 cm. 100 x shelf holders. 06 x diagonal 1176 mm ( for crossing ). 06 x Turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 728,00 € net plus legally valid VAT ...
Impact tester with motoric hammer lifting and protection housing - ready equipet for testing according CHARPY ISO148 (EN10045) - Demo-Machine (as new) - potential energy: 300 Joule - alternate models: 150 / 300 / 450 / 600 / 750 J. - warrenty period 24 month - see also the photos of optinonal items ; new
Plansifter MIAG LM 655-155- Maize run, six passages, cleaned Broken frame inserts have been repaired. Good working condition. We also offer a similar machine with nine passages.
Siemens Simoreg 6RA26 C98130-A1012-C242 Main drive with compact controller The above is on the board
l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw
l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw
Drill grinding machine drill Grinding drillautomaticallys automatically in one clamping. maximum drill diameter 60mm (probably 80mm) Also suitable for drills with three or four cutting edges. Ready for immediate use. Simon SP50 SP80 Special price
RC GROUP GLIDER FREE 630 V2 Y5 Brand:RC GROUP Type:GLIDER FREE 630 V2 Y5 Stock number:M23-4609 Cooling capacity:500 kW Application:Cooling Number of fans:12 Refrigerant:R134a Refrigerant Content:2x 107,5 kg Voltage:400 Volts Dimensions:7484 x 2310 x 2605 mm Weight:7,001 kg Year:2013 Number in stock:2 piece(s) Price:Quotation Request Description: Nice air-cooled RC Group water chiller with 2 screw compressors distributed over 2 cooling circuits. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C (Q= 602 kW at Tw= +15/10°C and Tamb= +40°C). Free-Cooling: Q= 536 kW at Tw= +15°C and Tamb= 0°C. Visit our website: used-refrigeration
EWD HDN/SV with width adjustment TOP ZUSTAND ! (1982/2009) WATER-CLOSED FUEHRS, SIDE BRETTERKAPPSAEGE... Through width 735 Passage shoe710 Hub 600 Speed max. 300 Feed speed 0-15 m/min Feed capacity 8.5 m/min Total weight 12 t SPALTKEIL ARTA C WITH SIDE WAREKAPPSAeGE Very well maintained facility little cut ! HDN-SV STATUS: VERY GOOD
used
tool adaptor: VDI 40 weight: . kg material: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Doppstadt AK 635 Compact - Built in 2013 - Hours 4839 - Permissible total weight 25,000 kg - Mercedes Benz diesel engine 635 hp at 2,000 rpm - AD BLUE - Load-dependent control of the material feed incl. automatic scraper floor reversal - Separate drive of feed roller and scraper floor (twin drive) - Fuel tank 750 litres - Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments - Auxiliary hydraulic connection 11 cm³ - Rear hinge: wheelbase 6,150 mm, - Scratching floor with 34 strips - Overbelt magnet -Radio remote control incl. transmitter, receiver, - Strainer basket Machine is overhauled and immediately available
Technical details drive: - Propulsion: Yanmar L100N - Starter: E-start (starter) - Number of cylinders: 1 - Fuel type: Diesel - Fuel tank capacity: 24 litres - Engine oil: 1.65 litres - Forced lubrication - Forced cooling - Fuel consumption at 75% load: 1.4 l/h - Sound pressure level (Lp): 67 dB(A) - Sound power level (Lw): 93 dB(A) Technical details Power generator: - Nominal voltage: 230 / 400 V - Apparent power at LTP: 3,200 / 6,900 VA - Active power at LTP: 2.5 / 5.5 kW - Apparent power at COP: 3,000 / 5,600 VA - Active power at COP: 2.4 / 4.5 kW - Generator protection class: IP 23 - Sockets: 1 x 230V Schuko / 2 x 230V, 16A / 1 x 400V, 16A - Protection class of sockets: IP 44 (LTP = time-limited generator power (max. power of the generator within 500 h/year with a continuous operation of the generator of 300 h), COP = aggregate continuous output with unlimit ...
RS Simulators Here we offer a temperature test chamber. Water cooling Temperature range: -45°C to +180°C External dimensions: width 1300 mm x height 2100 mm x depth 2250 mm Test area dimensions: width 840 mm x height 840 mm x depth 840 mm Aggregate part : width 2300 mm x height 2000 mm x depth 1300 mm Average heating speed: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Type: VTS 600/45 RS Refrigerant: R452 Zustand: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have on the phone.
Rotary vane vacuum pump Manufacturer: Becker Type: U4.630 SA/K o. F/K Vacuum: 3 mbar - 0.5 mbar motor: 15KW Status: used, tested! The general recreation for the Geraet is offered separately! Inclusive: oil filling, vacuum intake filter delivery time: from stock!; ready for use
Type: 6SE7031-3FG20-Z Description: SIMOVERT MASTERDRIVES SIMOVERT VC, CONVERTER CHASSIS UNIT, IP00 3 500-575V AC, 50/60HZ, 128A NOM. POWER RATING: 90 KW .
This sturdy workbench is perfect for do-it-yourselfers and professionals who need a sturdy work surface with storage space. The work surface consists of a 38 mm chipboard on which a high-quality edged flat sheet is placed, thus providing a solid foundation for any type of project. Under the work surface there is a shelf rack with 12 pull-outs (6 pull-outs per side), which offer plenty of storage space for tools, materials and accessories. The scope of delivery includes: 01x Workbench, used/ new System: SSI Schaefer Type: PR 600 Dimensions: approx. W 2,900 x D 800 x H 940 mm consisting of each: 02x Workbench stand, second choice (new) Material color: sendzimir galvanized Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 02x Workbench trusses, new Material color: blue Box profile ...
Type Junior 640 Motor power 3 kW Blade diameter 350 mm Motor arbor 30 mm Blade speed, rpm 2800 rpm Max trimming capacity: 860 mm Depth of cut with motor at 45? mm Depth of cut 90?: 110 mm Table dimensions 1050?690 mm Saw the angle 0? +45? -45? Made in Italy Transport dimensions Weight 180 kg
Machine type: Test mandrel Manafacture: System 3R Type: 3R-606 Year of construction: unbek. Condition: Used Offer will only be sent if a complete imprint is provided! Price 800 Euro incl. 19 % VAT and shipping within Germany Location Warstein , Germany Reference M-HIR-0623-1 DESCRIPTION We offer you to buy a used mandrel from the manufacturer System 3R, as shown in the pictures. Availability: Immediately Our offer is aimed at traders who are registered within the meaning of the trade regulations according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are excepted!
Qty 1 x Shaw 60in x 22in two roll mill, Manual nip adjustment, Peripherally drilled rolls (front and back), Hinged guide plates, Sleeve bearings with motorised lubrication, Right angle drive gearbox with 115Kw DC variable speed motor, All mounted on a heavy duty bedplate. Carter stockblender mounted on too. Complete with controls etc and in very good condition.
new
Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: MTU Engine: 12 V 1600 G 20 F Engine No.: on request Power: 576 KW G3 Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 / Diesel B 7 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 F Gene. No.: in production Generator power: 680 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 2.060 Height approx. mm ...
Type Grinders / Mincers Height 1580 Width 980 mm Length 1100 mm Voltage Electrical: 400V 50Hz 3N Installed Power 4 kw Main material Stainlees Steel Time of realisation 2-3 weeks Throat Diameter mm Grinder Type Feeding System Hooper
Nominal force: 6300 ton Number of continuous strokes per minute: 40 Ram stroke: 460 mm Distance between ram and table (table is in upper position): 1150 mm Table adjustment: 15 mm Distance between press columns: 1950 mm Ram dimensions: -front to back: 1680 mm; -left to right: 1680 mm Table dimensions: -front to back: 1950 mm; -left to right: 1920 mm Mechanical upper ejector: -max stroke: 100 mm; -number of positions: 1 -steps of stroke adjustment: 25-30-75 mm -force: 30 ton Pneumatic lower ejector: -max stroke: 300 mm -stepless stroke adjustment: 15-300 mm -number of positions: 3; -force: 65 ton Side windows dimensions: -width: 1100 mm; -height: 1280 mm Main motor: 400/590 kW/rpm Press layout dimensions: 6300x8965 mm Total height: 11125 mm Height above floor level: 9150 mm Total weight: 626100 kg
Fine grinding plant consisting of: Alpine 630 AFG fluidized bed counter-jet mill (V ges: 885 dm3, 10 bar pressure-shock-resistant, saerterrad fold-out), feed station, cyclone, 2 pcs. EX-protection valve, control cabinet and 4 pieces of product buckets. Previous use: Grinding of toner. The system can be inspected in a disassembled condition. Available at an additional cost: Dust filter Bühler PGFG 60/18 (39 m2 filter area).
AUTOMATIC CUT-OFF SAW model STROMAB TR 600 second hand machine in excellent working conditions CE regulation : YES machine suitable for cutting wooden boards, packaging, windows/doors frames , furniture , pallets, garden furniture and various equipment: hydraulic saw blade movement safety 2 hand operation machine according to CE norm brake motor safety fence on worktable working table mm.3000 on right side from saw blade with idle rollers diam.mm.90 working table mm.2000 on left side of saw blade with idle rollers diam.mm.90 n.1 saw blade diam. mm. 600 n.3 side stopper on fence right side of the saw blade technical data: motor power saw blade Hp 12 / Kw 9 motor power hydraulic unit Hp 1,5 / Kw 1,1 saw blade diam. mm.600 speed saw spindle rpm 3000 working hight over ground floor 850 mm working pressure 8 bar weight 450 kg
Siemens Micromaster 440 frequency converter 132/160 kW The Micromaster 440 inverter is suitable for a wide range of variable-speed drive applications. Its flexibility allows for a wide range of applications. It also includes cranes and hoists, high-bay warehouses, food, beverage, and tobacco production machinery, packaging machinery, etc.; In other words, applications that require higher functionality and dynamics of the frequency converter than usual. The inverter is particularly characterized by its customer-oriented performance and user-friendliness. Its wide mains voltage range allows it to be used worldwide. - Simple, guided commissioning - Modular design allows maximum configuration flexibility - Low-noise motor operation due to high pulse rates, adjustable (note derating if necessary) - Protection for motor and inverter - EMC filter, class A/B option - Latest IGBT t ...
Simatic S7-1500, inkl. Memory card, 6ES7 515-2UM01-0AB0, Siemens, mint condition -40% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Simatic S7-1500, 6ES7 515-2UM01-0AB0, Siemens, - incl. wall bracket - incl. Simatic S7 memory card, 256Mb, 6ES7954-8LL03-0AA0, Siemens, new price € 397 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions ...
Properties Used MULTI PANEL Simatic dimensions: Total height with monitor: 1,620 mm Height without monitor: 1,100 mm Control cabinet Height: 500mm Width: 540mm Depth: 240mm > b > monitor Height: 310mm Width: 400mm 1 STK. in stock
Double motor module SINAMICS, 2x3A, 6SLE120-2TE13-0AD0, Siemens, mint condition -40% Special price Attention: Original Siemens product, no replica from.. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Douple motor module, SINAMICS, 2x3A, 6SL3120-2TE13-0AD0, Siemens, - Input: DC 510-720V 7.2A - Output: 3AC 0-480V 3A/3A 0-550Hz - Control: DC 24V, Brake Output: DC 24V 2A/2A 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liabil ...
Control unit CU320-2 PN. SINAMICS, 6SL3040-1MA01-0AA0, Siemens, mint condition Special price Attention: Original Siemens product, no replica from.. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Control Unit CU320-2 PN, SINAMICS, 6SL3040-1MA01-0AA0, Siemens, - Digital Outputs 24VDC 0,5A - incl. SINAMICS Control Panel 6SL3055-0AA00-4BA0, Siemens, - incl. SINAMICS S120 Compact flash card, Performance 1, 6SL3054-0FC01-1BA0-Z, Siemens, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in ...
Nail series: 34° paper collated Strip nails Wire diameter: 3.8-4.6 mm Nail length: 100-160 mm Working pressure: 5-8 bar Weight: 7.10 kg Magazine capacity: 72 nails + Paper collated Strip nails of 4.6 x 160 19200 piece (600 St / carton, 32 piece box, order No. 140037) Compressed air nail machine 1100 EUR, 19200 ships nails 640 EUR
maximum number of results exceeded
please refine your search
