mak 6 m used for sale

Hazardous goods container, REI 90 / F 90 fire protection warehouse type WFP, cantilever racks, interior lighting, drive-on ramp, leakage sensor – used - : Price ex location: 29.500.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Denios Year of Make: 2013 Type: BMC-X 600-K-T90-2 Type: REI 90 / F 90 Fire Protection Bearing WFP-X 14; Surface room system Exterior paint RAL 9002 grey-white Interior paint RAL 9002 grey-white Door finish (both sides) RAL 9002 Grey White Dimensions Inside Exterior without extensions Width (mm) 2,560 2,952 Depth (mm) 5,500 5,938 Height (mm) 2,500 2,924 Collection volume Collection volume steel trough 1,560 litres Door arrangement short side Stainless Steel Door Handle with Anti-Panic Version 1 ST Technical ventilation fire protection system 1 ST Exhaust air monitoring 1 pc Door hold-open system  ...

Find more here - / Contact us at -

Manufacturer: Italpresse Model: BG/660 Year of Manufacture: 2002 Technical Specifications - Control Voltage: 220 V - Operating Voltage: 400 V - Frequency: 50 Hz - Phases: 3+MP+PE - Maximum Power: 108 kW - Maximum Current: 160 A - Cable Cross-Section (Supply): 70 mm2 - Static Load Capacity: 27,500 daN - Dynamic Load Capacity (with tooling): 36,000 daN Find more here - / Contact us at -

Manufacturer: Elin Type: TDQ-632A01S5K-99 Category: 3-Phase Oil-Filled Power Transformer Year of Manufacture: 2001 Technical Specifications - Rated Power: 630 kVA - Cooling: ONAN (Oil Natural Air Natural) - Type: T (Oil-immersed) - Frequency: 50 Hz - Voltage Ratio: 12 / 1.1 kV - Vector Group: Dyn5 - Rated Voltage V1: 10,920 / 10,500 / 10,080 V (taps) - Rated Voltage V2: 420 V - Rated Current (HV): 34.65 A - Rated Current (LV): 866 A - Short Circuit Voltage: 3.77% - Short Circuit Duration: 2 seconds - Insulation Level: BS75 WS28/WS3 - Total Weight: 2,115 kg - Oil Weight: 0.285 t - Insulating Fluid: Technol US 4000 - PCB Content: less than 1 PPM - Max. Oil Temperature: 84 degrees C - Sound Pressure Level: 29 dB(A) Find more here - / Contact us at -

Offer 26113 Technical data approx.: - Operating hours ( read ) approx. 3093 h - Load capacity approx. 3500 kg - Lifting height up to approx. 3750 mm - Fork length approx. 1350 mm - Fork length hydr extended to approx. 2350 mm - Hydr tine adjustment min. / max. 510 to 1350 mm - Space requirement with forks approx. W 1450 x L 4200 mm - Overall height approx. 2690 mm - Weight approx. 7800 kg - hydr. Sideshift + hydr. Tine adjustment - hydr fork extension approx. 1000 mm - Work lights front + rear - Suspension seat with seat heating - Battery year 2020

Bio shredders/ mixers Seko Constellation 6000/200ME Electrically powered stationary organic shredder/mixer for processing garden waste, cellulosic waste, organic waste, market waste, green waste, etc. for composting Power: 180 KW Total weight: 11,100 KG Basic equipment: • Branch gearboxes with planetary gearboxes and electric motors • With control console to start the machine at full load • Automatic gearbox control and reversal of the chopping unit • Hopper made of wear-resistant steel • Spiral chopping shafts made of wear-resistant steel • Chopping blade made of high-strength steel • Replaceable, adjustable counter blades made of wear-resistant steel • Retractable discharge belt, discharge height up to 3m Condition of the machine The machine is in good technical and visual condition. Warranty: The machine will be sold in the condition existing ...

LINERS CYLINDER HEADS CONROD ROD PISTONS FUEL UNIT CRANKSHAFT CAMSHAFT BEARINGS All parts new, unused P

Control load switches, RCBOs, motor protection switches, reversing switches -Type: CG8 D-V226-602 FS1 -without: gearshift knob Price: per piece -Number: 24 switches available -Weight: 0.6 kg

Cabur CL 624/24 XAL06VC

Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,660 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x Shelving rack stand, used Material colour: sendz. galvanized Finish: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile size: 31 x 60 x 0.88 mm Weight / piece: approx. 8.92 kg Incl. gravel bar and foot plates (Shelf stands are pre-assembled) 2,490 mm high 600 mm deep 06x Shelves, used Material colour: sendz. galvanized f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight | Pcs.: approx. 8.12 kg max. load per shelf 75 kg, with the same load. distributed load. 24x Shelf Racks, used suitable for slotted stands Material colour: sendz. ...

Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,660 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x Shelving rack stand, used Material colour: sendz. galvanized Finish: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile size: 31 x 60 x 0.88 mm Weight / piece: approx. 8.92 kg Incl. gravel bar and foot plates (Shelf stands are pre-assembled) 2,490 mm high 600 mm deep 06x Wire mesh shelves, used Material colour: sendzimir galvanised f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 590 mm Total height: approx. 30 mm Frame profile: approx. 25 x 25 mm Mesh size: approx. 68 x 50 mm Weight|pcs.: approx. 6,90 kg Note: Water permeable (up to 70%), suitable for sprinkler ...

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: RARIPRESS, Hydraulic pump, hand pump, high-pressure pump -Type: RP 62C -Pressure range: max. 700 bar -Quantity: 1x hand pump available -Dimensions: 580/185/H180 mm -Weight: 14.7 kg

Offer : Manufacturer : BSS Material Flow Model : SPC 1700-600-A4-2T Type : Spiral Conveyor Belt width 600mm Device available from 01.08.2025 Total available Almost identical 3 piece(s) -------------------------------------------------------------------- Furthermore, from location . Fully driven roller conveyor Approx. 670m total length Year of construction 2017 Roll width 600mm Consisting of - Different element lengths : 3m elements / 2m elements / 1m elements - 16 scales - 15 curves of 90° each - approx. 20 rollers stroke - turner / corner turner - 3 x Apollo spiral conveyors Location : 42781 Haan Ready for collection from 01.08.2026

TECHNICAL DATA: Working area: 1200 x 800 mm 3 flywheels: Ø 600 mm Saw blade length: max. 6970 mm Installed power: 3 kW Cutting height: 630 mm

Agilent HP 6890 Gas Chromatograph (G1530A) FID + G1888 Headspace Sampler + G1512A Controller + G1513A Autosampler Composition: Gc 6890 agilent Hewlett packard G1530A network headspace sampler G1888A Injection Turret 6890 - G1513A G1512A controller With software With accessories Without a computer Warning, equipment not tested Buy as is

max. wheel diameter: 406,4 mm gear width: 66 mm max. module: ca. 12,5 min. module: Control: Zyklengesteuert total power requirement: 21 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: 3,3 x 2,5 m The GLEASON 641 G-PLETE bevel gear generating machine is a proven and robust solution for the production of spiral bevel gears, hypoid gears, and Zerol bevel gears usingthe well-established Gleason generating method. Designed for reliable and repeatable machining processes, this machine is ideally suited for small to medium batch production in industrial gear manufacturing. The 641 supports both roughing and finishing operations in a single setup (completing process), ensuring consistent gear quality while reducing handling time. Its mechanical generating system with variable roll ratio and plunge feedmechanism allows precise control of the tooth geometry, making it a depend ...

Generator Condition: Used – Good condition Power: 600 kVA Availability: Available Description : Diesel generator emergency Generator : Baudoin Range : Canopy Model 600 Engine : Baudoin Type : 6P15.2 Year : 1989 Operating running hours : 500 H Prix 10 000 € HT Delivery available at an additional cost. Price EXW 10.000 € Groupe MMO, European leader in the revaluation of generator sets If you have a specific need or request, contact us: show contacts #4012 #cummins #decarbonisation #perkins #pramac #groupeelectrogene #rachat_groupe_electrogene #revalorisation #achat_vente #sdmo #volvo_penta #aman #caterpillar #renault #johndeere #iveco #poyaud #doosan #mtu #kohler #detroit_diesel #wartsila #jenbacher

An essential ingredient for removing impurities from the material. With a specially developed rotor with replaceable blades, high friction is generated at the target fraction and thus ensures thorough cleaning. Maintenance hatches on both sides allow easy access to the interior. The housing and the screens underneath are made of stainless steel. A support frame is included as well as inlet and outlet nozzles for the water. More information on request!

Perkin Elmer AAnalyst 600 Atomic Absorption Spectrometer Untested Equipment Without a computer Without software

SMERAL TRNAVA LEN 63C eccentric press was built in 1988 in Czechoslovakia by Šmeral Trnava. It is an extremely reliable machine designed for cold metal forming. It is capable of performing operations such as precise punching, stamping and bending of workpieces. The high press force of 63 tonnes, combined with a very dynamic slider, guarantees the best machining results. The slider makes between 45 and 140 strokes per minute and its stroke is adjustable in the range from 10 mm to 105 mm. With its very rigid C-shaped design, the SMERAL TRNAVA LEN 63C also provides excellent stability during even the most intense challenges. All this makes the offered press an excellent choice for the production of parts with high repeatability and excellent precision. The LEN 63 C eccentric press weighs 5850 kg. Technical specifications of the SMERAL TRNAVA LEN 63C press - maximum press force: 63 t (6 ...

Stroke machine, Fabr. Boku, Type Hamburg 610

GE Frame 6B Gas Turbine Complete Power Plant. Gas Turbine Model GE Frame 6B GT Model No. 6541B Manufacturer General Electric Year of Manufacture 1990 Equivalent Operating Hours (EOH) Approx. 120,000 Hours Plant Scope Complete Plant Fuel Type Natural Gas Frequency 50 Hz Rated Output Approx. 38–42 MW (typical for Frame 6B simple cycle Frequency 50 Cooling System Air / Hydrogen (subject to configuration) Excitation System Included 1. Gas Turbine Package Item Description Gas Turbine GE Frame 6B Combustion System Standard Combustion Starting System Included Lube Oil System Included Fuel Gas System Included Air Intake System Included Exhaust System Included Fire & Gas System Included GT Base & Enclosure Included Inlet Filtration Included

Manufacturer: Italpresse Model: PRE46 - 3 14-6X180 Year of Manufacture: 2007 Voltage: 400V Frequency: 50 Hz Hydraulic Oil: AGIP OSO 46 Heating System Oil: AGIP ALARIA 3 Certification: CE Find more here - / Contact us at -

Model: TRC1500/600 Year: 2002 Condition: Used Serial Number: 1790 Stock Number: 3213 Belt width: 600 mm Transport length 1500 mm Power: 3 x 400V, 50Hz, 0.09kW Dimensions: 1600 x 850 x 1000 mm Weight; 135 kg

Unused Alfa Laval disc centrifuge type HBPX 6000. Year of manufacture 2023. CE The centrifuge has never been connected and has not worked on production.

Manufacturer : Nabertherm Model: N 875/65HA Year of Manufacture: 2015 Maximum Temperature: 650 degrees C Power Supply: 400 V / 50 Hz Current: 39 / 39 / 39 A Power Rating: 27 kW - Condition: This furnace is in like-new condition. Since arriving at the current facility in 2020, it has never been observed in operation. Employees report that it was used only two or three times at the very beginning. Find more here - / Contact us at -

New galvanized or painted inclined props 3m, 3.50m, 4.00m at great conditions directly from the factory. From.34,50€/ piece.+ VAT Inclined props new, painted 1,60m - 3,00m = 34,50€/ piece Inclined props new, painted 2.00m - 3.60m = 35.50€/ piece Inclined props new, painted 2.20m - 4.00m = 38.50€/ piece Inclined props new, galvanized 1.60m - 3.00m = 38.90€/ piece Inclined props new, galvanized 2.00m - 3.60m = 40.90€/ piece Inclined props new, galvanized 2.20m - 4.00m = 42.90€/ piece Frame for props new, painted 70,00€ European joint product. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NUMBER: DE279047055 Office/ Storage Address: Company SFS Ulmer Str. 1 89614 Öpfingen Ulm Registration ...

New galvanized or painted inclined props 3m, 3.50m, 4.00m at great conditions directly from the factory. From.34,50€/ piece.+ VAT Inclined props new, painted 1,60m - 3,00m = 34,50€/ piece Inclined props new, painted 2.00m - 3.60m = 35.50€/ piece Inclined props new, painted 2.20m - 4.00m = 38.50€/ piece Inclined props new, galvanized 1.60m - 3.00m = 38.90€/ piece Inclined props new, galvanized 2.00m - 3.60m = 40.90€/ piece Inclined props new, galvanized 2.20m - 4.00m = 42.90€/ piece Frame for props new, painted 70,00€ European joint product. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NUMBER: DE279047055 Office/ Storage Address: Company SFS Ulmer Str. 1 89614 Öpfingen Ulm Registration ...

Professional vacuum filler Handtman VF 610 is designed for precise filling, dosing and portioning of meat mixtures in the meat industry, processing plants and professional production lines. This model is an ideal solution for users who require high capacity, premium precision and reliable operation in daily professional use. The vacuum operating system enables uniform filling without air pockets in the mixture, improving product texture, final quality and shelf life. The machine is especially suitable for the production of sausages, pâté, burgers, cevap products and other meat items. Model VF 610 offers portioning speed up to 450 portions per minute with high accuracy. Maximum productivity of up to 3000 kg/h allows efficient operation even in demanding production conditions. The unit is controlled via a touch panel for easy operation and quick parameter adjustment. The construction  ...

Aircooled chiller CLIMAVENETA NX2 G06/K 0706 656.5 kW Cooling capacity: 656.5 kW / 186.67 tons (12/7 — 35°C) Year of manufacture: 2023 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 5 pcs. Danfoss DSH485C4APC (scroll) + 1 pcs. Danfoss DSH600B4APC (scroll) Type of refrigerant: R454B Number of fans: 12 pcs. (EC-fans) Dimensions: 6.26x2.26x2.57 m. Weight: 5148 kg. Working hours: 0/0/0/0/0/0 h. Condition: New

used power converter input 3 x 400V 25A 50/60 Hz Output up to 485 V 30 A Field voltage 325 V 5 A Top condition

Sheeting machine FRITSCH; Type: Rollfix 60/650 E -in bakery condition- - Automatic flour shaker - Automatic reel - storable programs - Multiple degrees of reduction - Freely programmable curve settings - LCD display - El. Connection: 3x 400 V, 230 V, 50 Hz, 3 Ph, 11.0 A, 1.4kW - Strip width: 650 mm - Condition: Good, ready to use The machine is in good condition and ready for immediate use. Visits and test runs are possible by arrangement.

PLC control, digital output, digital input, digital input module -Manufacturer: Siemens, SIMATIC S7, Digital Input Module with Base Unit -Type: 6ES7 131-6BF01-0BA0 6ES7131-6BF01-0BA0 -Base unit: SIMATIC ET 200SP 6ES7193-6BP00-0DA0 -Number: 3 modules available -Price: per piece -Dimensions: 118/18/H74 mm -Weight: 0.1 kg/pc.

Refrigerated storage cabinet / refrigerator FRIGINOX G/GL1 650 liters glazed Model: G / GL 1 STAR+3 AIR CONDENS With glass door With interior lighting 4 shelves Volume: 650 liters Power: 480W Temperature: from 0 to +10°C Approximate dimensions: 87x70x205cm On 4 casters Year of manufacture: 2015 In excellent condition Equipment tested at 4°C

Description R+S Verpackungstechnik Side sealing machine FAS 700 with shrink tunnel VAST 652 from 2013/2014 1 Minitec conveyor belt built in 2013, L approx. 5,000 mm, W 200 mm, w. sideways Guide rails, 1 conveyor belt R+S TB 2000, built in 2014 SN RS-46010, L 2,000 mm, W 350 mm, base frame height-adjustable, w. lateral. adjustable guide rail, 1 side welder R+S VAS700 built in 2014, SN RS-45943 1 shrink tunnel R+S VAST652 built in 2013 SN RS-47085 1 conveyor belt R+S TB 2000 built in 2014 SN RS-46004 L 2,000mm, W 350 mm, w. 2 sides adjustable guide rails, height-adjustable base frame

Oil centrifuge NEW.