mak 6 m used for sale

For sale Makino 5-axis SImultan machining center type D500, equipped with a Fanuc 310iS (Profesional 5) controller including Makino robot system. Very nice 5-axis simultaneous machining center type D500. X-axis movement: 550 mm Y-axis movement: 1000 mm Z-axis movement 500 mm A-axis: 150 degrees (+30 degrees to -120 degrees) C-axis: 360 degrees continuous Complete with Makino robot system. It is a Fanuc 6-axis robot type R2000iB/165F including rack magazine Makino VIP with 45 positions

Manufacturer: Makor, Type: Kronos, Year: 2009, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 80, work piece cleaning: yes, Conveyour system: Band, Laquer recharging: yes, by rollers: yes, Feeding speed m/min: 1,5 - 10, Wight approx. kg: 4500, Year :2009

Three-phase motor, electric motor, Maka milling motor -Power: 1.3 kW -Speed: 2800 rpm -Shaft: Ø 18 x 40 mm -Construction with: dovetail guide -Dimensions: 330/135/H195 mm -Weight: 15.7 kg

X : 1800 mm Y : 1000 mm Z : 800 mm Number of working hours : 2000 Tool measuring probe Chip conveyor

X : 550 mm Y : 550 mm Z : 550 mm Fanuc control unit Table size : 400 mm x 400 mm Machine is in working condition

X : 650 mm Y : 550 mm Z : 450 mm 20.000 rpm 1500 liters double head compressor Tool cabinet and hool holders come with machine

Makino SP43 EDM Wire Cutting Machine Machine is in very good condition Double generator X : 450 mm Y : 300 mm Z : 320 mm

Makino S33 High Speed Machining Center Control Unit : Fanuc PRO 5 X: 650 mm Y:500 mm Z: 400 mm Spindle speed : 20.000 rpm Rapid: 40.000mm/min Cutting: 40.000mm/min Prob Tool holders are included Machine is in good condition

Turkish made 3000 mm x 10 mm plate rolling machine 3 rolls Maximum bending thickness : 10 mm

Max. Twisting capacity 16x1,5 (Steel pipe) Max.Bending Radius 40 mm Twisting speed 500 ° / s Unlimited program writing Control unit Bosch Rexroth Twisting precision ± 0.05 ° Max.bending angle 185 ° Feeding length 2000 mm Unlimited number of bending programs Rotation speed 720 ° / s Feeding precision ± 0.05mm Feed speed 1.2m / s Rotation accuracy ± 0.05mm Twist direction change time 3 sec Weight 850 kg Dimensions (Width) 1000 mm Dimensions (Length) 3250 mm Dimensions (Height) 1800 mm

Makino V55 Vertical Machining Center Double table X : 900 mm Y : 600 mm Z : 600 mm 22 000 rpm Machine can be seen in working condition

INSIDE DIAMETER : 1.800 mm, BODY LENGTH : 3.000 mm BALL MILL, IN STOCK, NEW AND 2 YEARS GUARANTEE, STEEL OR RUBBER LINING, MILL HEADS: GGG60 MILL GEAR : GGG80 CENTRAL GREASE LUBRICATION SYSTEM ALL BODY SEATED ON A STEEL CASE, 132 KW ELECTRICAL MOTOR, COUPLING TRANSMISSION, NOTE: FOR PROCESS DESIGN AND SPECIAL DIMENSIONS, PLEASE ASK

Completely renovated lift With new axle and bushings New electrical connection New packing box for gearbox 2 speeds Approx: 40 amps

- Bread Slicer Slicer & Bread Packing Machine -Manufacturer: P+S Mako Verpackungsmaschinen GmbH Pfitzenmaier & Söhne - Type packaging: Rianta 84-CSS/2000

The hydraulic profile bender PBH 80 is in good technical condition, including a wide range of accessories. Can be seen by appointment.

SENTE MAKINA PLSS 3X1.5 plasma cutting machine was built in 2015 in Turkey. Distinguished by its ease of use, stable construction and large working area, the machine is used in even the most intensive machining of stainless, galvanised and aluminium sheets. The control panel designed for operating the plasma cutting machine has a specialist CNC controller with the ability of importing programmes in DXF format, which optimises the machining process and ensures economical cutting regardless of the machined material. During its operation, the machine underwent regular servicing and upgrades, during which, among others, the grate was replaced. The SENTE MAKINA plasma cutting machine weighs 980 kg. Technical data of the SENTE MAKINA PLSS 3X1.5 CNC cutting machine - CNC control: SENTE MAKINA - work table dimensions (L x W): 3000 x 1500 mm - grate work area (L x W): 3170 x 1500 mm - plas ...

This Makino V55 Vertical Machining center was manufactured in the year 2001. It is equipped with a Fanuc Professional 3 control unit. The machine has a spindle speed of 20000 rpm.

This Makino F5 Vertical Machining center was manufactured in the year 2013 in Singapore. It is equipped with a Fanuc Series FS31i control unit. The machine has a spindle speed of 200-20000 rpm.

Control: Fanuc Profesional 5 Max.travel range: X 450 mm Y 650 mm Z 460 mm Spindle speed ? 18000 rpm Taper ? HSK 63 Tool changer ? 25 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for parts set up, lase

Control: Fanuc Profesional 3 Max.travel range: X 450 mm Y 650 mm Z 460 mm Spindle speed ? 18000 rpm Taper ? HSK 63 Tool changer ? 25 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for parts set up, lase

This Makino V33i Graphite Vertical Machining Center was made in the year 2014 in Germany. It is equipped with a Professional 6 control unit and has 3 axis. The machine has a spindle speed of 20000 rpm.

This MAKINO EU64 Erosion machines machine was manufactured in 1999 in Japan. It is operated through a MAKINO MGW-N control unit. This 5 axis machine can work with a workpiece weight 1500 kg.

Bag Clipper P+S Mako BFS30C-C/2005 -Bag clipper, bread bag, noodle bag, etc -Manufacturer: P+S Mako Verpackungsmaschinen GmbH Pfizenmaier & Söhne -Type: BFS 30C-C -Stainless steel machine -Operating voltage: 3V 400 50Hz -Year of construction 2005

Multi-rip saw MAKA type V350 Specifications: Chain width (mm): 350 Cutting height max. (mm): 120 Engine power (kW): 22 Feed rate (m/min.): 0 - 40

The machine cannot be started up at the moment, it will probably be the memory batteries of the control, including replacement control with display, an inspection is possible.

Maszyna Maklaus model Res-Uni SPECIFICATIONS: Max. rewinding speed 1500 meters per minute Cycle production time 17-21 seconds (for 250 meter rolls) Max. diameter of mother roll 550 mm Max. material width 600 mm Min. material width 450 mm Max. diameter of finished roll 300 mm Mother roll core diameter 76 mm Inside diameter of finished roll 50 mm (30mm, 32mm, 38mm, 42mm, 76mm optional) Material thickness 10 micron - 50 micron Installed power 14 Kw Voltage 400 V Air pressure 6 bar Compressed air consumption < 100 liter per minute Machine overall dimensions 1350x1800x2200 mm Machine weight 1250 Kg STANDARD FEATURES INCLUDE: ● Two Servo Drive microprocessor controls ● On - board computer controls ● Touchscreen Operator Interface in operator language ● Electronic rewinding tension control ● Integrated command pulpit ● Pneumatic device for the Lifting of Mothe ...

GND(Turkish) 6 meter CNC Tube Bending Machine Maximum bending length : 6 meter Servo control(Brand Lenze made in Germany) Some tools are included CNC Control Number of axis : 6 38 mm diameter Machine is like new condition

X Axis Travel mm. 560 Y Axis Travel mm. 560 Z Axis Stroke mm. 560 Hsk 63 spindle Spindle speed Min./max Rpm. 14,000 Spindle power in kW/maximum copy 15/18 Kw Overall dimensions - Maximum workable piece Dia. Mm. 700 X H mm. 800 Pallet number 2 Pallet dimensions mm. 400 X mm. 400 B-axis Continuous 0.001° Max Load Allowed Kg. 400 Rapid feeds X,y,z mm./min. 40,000 Tool warehouse 6 0 Positions Fanuc / Makino Professional 3 control

Embossing machine, ornamentation machine - for the production of picture strips and picture frames with decorations and ornaments Model: STP / P Year: 1999 The machine was developed to emboss ornaments and decorations on wood, e.g. picture frames, furniture accessories, plastic, veneered wood and MDF Specifications: 8 max. Material width and 3-1 / 4 max. Thickness cap., Min. 7/8 wide x 3/8 thickness and 29-1 / 2 min. Length; 4-3 / 4 max. Embossing wheel height-adjustable and inclinable from + 5 ° to -45 °, wheel diameter from 160 to 200 mm, 60 mm Ø arbor. Embossing feed and recovery tank with a 26 lbs cap. and solvent exhaust outlet, a horizontal and vertical (piped) screw conveyor leads the pulp to an exchangeable extrusion nozzle, automatic patented recovery of the excess embossing mass. - 3.5 kW total installed power. Rollers, tubes and stamping compound are not inc ...

Router model OF 950 year 90

Siemens 840D SL steering unit Year of construction 2016 Table dimensions 1000 x 500 mm MAKINO PROFESSIONAL 5 steering unit Maximum load allowed on table 650 kg Axis travel x mm 900 Y-axis travel 500 mm Z axis travel 450 mm Min/max distance spindle and table 150-600 mm HSK A63 spindle connection Spindle revolutions rpm 20,000 Spindle Motor Kw 11-15

Vibrating chisel chiseling machine Manufacturer: MAKA Model: STV 71 Horizontal chiseling unit

Horizontal Pass Average Cutting Machine for bun-shaped baked goods or for cutting breads in half with 1 band knife with lubrication Channel width approx. 35cm Duct height adjustable via material pressure 15cm max. completely stainless steel

This Makino D500 horizontal machine center was made in the year 2016 in Germany and has 20000 spindle hours. It is equipped with a Makino professional 5 control unit and has 5 axis. The machine has a spindle speed of 14000 rpm. 2 units are available.

This MAKINO a120nx Horizontal Machining center was manufactured in the year 2017. It is equipped with a Makino CNC Professional 6 control unit and has 3 axis. The machine has a spindle speed of 20-8000 rpm.

X-axis travel : 900 mm Y-axis trave : 800 mm Z-axis travel : 1020 mm Feed rates : 50 m/min Rapid traverse : 50 m/min Number of pallets : 2 Table dimensions : 630x630 mm 360.000 positions : Max. workpiece weight : 1200 Kg Spindle speed : 6000 rpm Spindle drive power : 50 kW Cooling through the Spindle Center : 80 Tool holder : HSK-A100 Tool magazine slots : 137 Chip conveyor High pressure pump Filtration unit

Description: Machine no 80-4056-0134 Ampere 60 A Workpiece weight 450 kg Tool changing device 8 x-motion: 600 mm, y-motion: 400 mm, z-motion: 250 mm, control: Makino MGE20, table surface area l x w : 750x550 mm, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 3,500 x 3,000 mm

Description: Miter Saw with Table Table WST06 included Approx. Onsite Dimension. (l x w x h): 1,350 x 900 x 1,600 mm, weight approx.: 70 kg

Description: belt width 150 mm input belt lenght 800 mm output belt lenght 850 mm Approx. Onsite Dimension. (l x w x h): 2,750 x 1,750 x 2,000 mm, weight approx.: 800 kg

weight approx.: 1 kg, Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm

x-travel:920 mm y-travel:510 mm z-travel:460 mm control:Professional P (Fanuc 0i MD) Spindle RPM:14000 spindle drive:25/18 kW Spindle Torque:175 / 117,8 / 95 Nm rapid travel x/y/z:36/36/30 m/min table-size:1170x510 mm tool changing time:1,2 sec tool magazin::30 BT 40 Dimensions (L/W/H):3560 x 2770 x 2480 mm total power requirement:51 kW weight of the machine ca.:6,8 t CNC Rotary Table with countersupport:Nikken CNCZ 260 This is a well maintained 4-axis machine with Nikken CNCZ 260 rotary table, countersupport and 50 bar coolant through spindle system.

x-travel:560 mm y-travel:560 mm z-travel:600 mm control:Fanuc 16 iMA rapid travel x/y/z:84 / 84 / 94 m/min feeds x/y/z -stepless:50000 mm/min spindle drive:22 kW spindle speed::50 - 14000 1/min max. torque on the spindle:156 Nm size of pallet:400x400 mm numbers of pallets:2 table load:500 kg working diameter:630 mm workpiece - installed height:1000 mm change time of pallets:10 sec distance spindle center to table:80 -640 mm Distance spindle nose - pallet centre:70-670 mm tool magazin::60 x HSK-A 63 tool changing time:1 (4) sec max. tool weight:8 kg max. tool diameter:70 / 170 mm tool length - max.:360 mm total power requirement:64 kVA weight of the machine ca.:9 t dimensions of the machine ca.:15 m² Macro B:600 Variables This well maintained horizontal machining center has a full 4th axis, twin pallet changer, 60 tools magazine for HSK-A 63 toolholders and coolant through spindle 50 ba ...

x-travel:560 mm y-travel:560 mm z-travel:600 mm control:Professional 3 (Fanuc 16i MA) rapid travel x/y/z:84/84/94 m/min feeds x/y/z -stepless:50000 mm/min spindle drive:22 kW spindle speed::14000 1/min max. torque on the spindle:167 Nm size of pallet:400x400 mm table load:500 kg working diameter:630 mm workpiece - installed height:1000 mm distance spindle center to table:80 -640 mm :70 -670 mm tool magazin::137 ISO 40 max. tool weight:8 kg max. tool diameter:70 mm tool length - max.:70/170 mm weight of the machine ca.:14 t total power requirement:260 kVA User Macro variables:82 This flexible manufacturing system consists of two Makino A 55 connected to a 28 pallet linear pool with 3 setup stations. One machine has a defect in the b-axis. Second machine has a defect in one linear axis. Complete system must be disassembled and loaded by buyer. We can help to find company with forklift tru ...

Following MAK 6M20 Engine available For Sale. Make:MAK Type:6M20 Serial Number:30098 KW:930 RPM:900 Year:1995

Mak 6M20 Block Very Good Condition for sale

Mak 6M20 Liner Very Good Condition for sale

Mak 6M20 Piston Very Good Condition for sale

Now available: MaK M25 6 cylinder engine block in stock and ready to be sold. Ask us for more information and prices.

DEAR'S SALE, COMPLETE Mak 6M331 engine & reduction gear Reinjest WAV1400 type Ratio 2.5/1 Std cranksaft good condition Brgds Hakan KUSCU +905323642509

MAK 6M20 crankshaft Condition: Refurbished Part number: 1.13.7-25.1001-01 and 1.13.7-25.1000-11 - all base pins are standard size (180mm) - all connecting cones are 1st stage undersize ground (151,50mm) - incl. gear and counterweights - incl. DNV-GL test Attention: We also have various other RECON parts of different manufacturers / types available. We are happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!