mak 6 m used for sale

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R270 CD; Year of production 2004; SKIN packing machine; Working only with hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 244mm; Forming width: 364 mm; Molding depth: 80mm; Formats: 2.1; Length: 6800 mm; Width: 1100 mm; Height: 2100 mm; Weight: 1600 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R530; Year of production 1996; Working only with hard foil; Bottom foil: +/- 465 mm (approx); Upper foil: +/- 455 mm (approx); Molding length: 192mm; Forming width: 404mm; Molding depth: 40mm; Formats: 4.2; Length: 7000 mm; Width: 1100 mm; Height: 2100 mm; Weight: 1600 kg.

TECHNICAL SPECIFICATIONS Manufacturer: MOGENSEN Designation: Stangensizer / Stangenrost Type: DX3527 Year of construction: 1994 Version: Two-deck Clear length: 3,500 mm Clear width: 2,300 mm Total height: 2,750 mm Rod diameter above: 70 mm Rod diameter bottom: 40 mm Top gap distance: 216 mm Gap distance below: 330 mm SPECIFIC COMMENT - Reappraisal 2020, since then unused - Robust construction - Ideal for coarse separation

Machine type MIG/MAG inverter welding system Make RILAND Type MIG 180PGDM Supply voltage 1 x 230 volts Adjustment range 15 – 180 amperes Duty cycle 20 % ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly system version Wire feed gearbox 2-roller gearbox Fuse 16 Ampere Dimensions L x W x H 386 x 170 x 300 mm Special accessories TIG welding DC without HF E-welding Weight 8 kg Age 2 years As good as new Scope of delivery welding system with the following accessories: 1 piece welding torch MB 24, 2 mtr. Long 1 piece pressure reducer argon 1 piece ground cable 3 mtr. long, 16 sq m 1 piece electric welding cable 3 mtr. long, 16 sq m 1 piece of aluminum equipment 3 power nozzles aluminum, 1.0 mm Ø 3 pieces of current nozzles stee ...

Morse taper sleeve, tool holder, morse taper, morse cone, taper sleeve, adapter - Adapter for the cone in the chuck of a lathe -External mount: MK6 -Number: 6x recordings available -5x recording: inside tool MK5 -1x recording: inside tool MK3 -Price per piece -Weight: about 1.7kg/pcs

Morse taper sleeve, tool holder, morse taper, morse cone, taper sleeve, adapter - Adapter for the cone in the chuck of a lathe -External mount: MK5 -Number: 7x recordings available -3x recording: inside tool MK4 -4x recording: inside tool MK3 -Price per piece -Weight: about 0.6kg/pcs

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter -Adapter for the cone in the chuck of a lathe -Outside mount: MK8 (Ø80 mm to Ø75 mm) -Number: 10x recordings available -2x holder: inside tool MK6 -6x holder: inside tool MK5 -Price: per piece

Travel distances: 500 x 450 x 400 mm [ X x Y x Z ] Number of axles: 5 Rotary swivel table HEM 500 U 3+2 Control: Heidenhain iTNC 530 Spindle holder: ISO 40 / BT 40 Spindle speed: 12000 rpm Tool changer: 30 - fold Drive power : 20 kW Torque : 75 Nm Rapid traverse: 30 m/min Spindle cooling Conveyor Diameter 500 mm IKZ 20 bar ITC 5X Intelligent Thermal Control Oil trap Minimum quantity lubrication Oil mist extraction Blowing air through tool screw Mobile handwheel Glass scales Encoder B-axis Encoder C-axis Tool probing system (TS27R OMP40 Probe

Gear motor, electric motor -Speed: 18 rpm -Power: 0.135 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 350/190/H175 mm -Weight: 12 kg

Coordinate Measuring Machine Brown&Sharpe Model: Microval 454 PFX YOM: 1996 Measuring range X-axis: 457 mm Measuring range Y-axis: 508 mm Measuring range Z-axis: 406 mm Max table loading: 225 kg Machine dimensions (LHW): 895x885x1575 mm

Spiral kneader for 80 kg dough Dust cover stainless steel 2 drives (shell and dough hook separated) Mobile on wheels/ Weight 390 kg Exhibition machine therefore special price

SECOND-HAND SANDING MACHINE FOR TURNED PIECES LOCATELLI MOD. ORIENTAL MATIK 1200 - With automatic loader - No. 2 abrasive belts -Brushes - No. 6 spindles - Working length 1200 mm

TECHNICAL SPECIFICATIONS Manufacturer: MicroStep Europe Designation: Plasma cutting machine CNC Type: SPL-P 9001.20+S500 Year of construction: 2008 Design: with KJELLBERG plasma source HiFocus 280i Composed of: - MicroStep CNC guide machine SPL-P 9001.20+S500 - CNC machine control MSNC-500 for WindowsXP - CNC flame cutting table with sectional extraction / 9000x2000 mm - Slag trays for the integrated shaft - Kjellberg plasma source HiFocus 280i, with autom. Gas console - CNC interface for HiFocus 280i

- Pallet feeder FP 95 incl. VACULIFT III - MC Control - 1. Station 4 Niro fold buckles - Perforating, creasing and cutting deivce parallel fold - KL- und SUPER KTL-Version with 2 knifes - Vertical Stacker SBAP 46-ME, Bj. 2016 - Stream delivery ASP 66-2ME, Bj.2012

Metal detector Safeline V4-wheel Mettler Toledo - Model: V4-RAD - Metal detection - Voltage voltage: 100.240 Vac - Frequency: 50 /60 Hz - Power: 340 W (Max.)

Morse taper sleeve, tool holder, morse taper, morse cone, taper sleeve, adapter -Adapter -Intake: MK4 -Recording tool: MK1 -Number: 24x recordings available -Price per piece --Weight: 0.55kg/pcs

Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter -Adapter -Recording: MK4 -Tool holder: MK2 -Number: 27x recordings available -Price: per piece -Minimum order: 3 pieces -Total length: mm -Weight: 0.5 kg/piece

Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter -Adapter -Recording: MK4 -Tool holder: MK3 -Number: 102x recordings available -Price: per piece -Minimum purchase: 3 pieces -Weight: 0.4 kg/piece

Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter -Adapter -Recording: MK5 -Tool holder: MK2 -Number: 51x recordings available -Price: per piece -Total length: mm -Weight: 1.5 kg/piece

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter -Adapter -Recording: MK5 -Holder tool: MK3 -Number: 38x recordings available -Price: per piece -Total length: mm -Weight: 1.1 kg/piece

Morse taper sleeve, tool holder, morse taper, morse cone, taper sleeve, adapter -Adapter -Intake: MK6 -Recording tool: MK3 -Number: 3x recordings available -Price per piece -Weight: 4kg/pcs

used spiral kneader Eberhardt Maximat MAAN 160 extendable, completely overhauled, 160 kg dough, 2 watches, with 2 stainless steel boilers, stainless steel spiral, many new parts, new friction wheel, new lifting cylinder, electrics renewed, 380/400 V, 3 phases, 50 Hz, 19.5 A, spiral 7.8 kW, boiler 0.75 kW

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter -Adapter -Recording: MK6 -Recording tool: MK4 -Number: 3 recordings available -Price: per piece -Weight: 3.7 kg/piece

Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter -Adapter -Recording: MK5 -Tool holder: MK4 -Number: 41x recordings available -Price: per piece -Weight: 1 kg/piece

format 46 x 66 cm Year of construction 2003 Flat stack feeder Vacustar 1st station: 4 folded sheets downstream knife shaft Noise insulation hood Counting device MS-Control without display Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Harro Höfliger MKT 120 horizontal end load cartoner, intermittent motion, bucket infeed, with GUK FA21/4 Cartonac 91 leaflet feeder, glue closure with Nordson ProBlue 4 hot melt unit, minimum carton size 15 x 15 x 60 mm up to maximum 100 x 80x 200 mm, mechanical output up to 120 cartons per minute.

Universal milling angle head, milling angle head -Recording: MK4 -Drive mount: MK5 -Angle head: swiveling -Dimensions: 440/300/H310 mm -Weight: 68 kg

offer 12001 Specifications: - Material thickness 1.25 mm - radius 180 mm - Roller center distance 63 mm - material thickness at 40 kg/mm² strength 1.25 mm - Working speed approx. 6 + 12 m/min - Drive 400 V / 0.7 / 0.85 kW - Space requirement approx. W 550 x H 1250 x D 1000 mm - Weight approx. 120 kg - with: - E - foot button

Geared motor, electric motor, three-phase motor -Speed: 56 rpm -Power: 0.37 kW -Design: B5 angle -Diameter hollow shaft: Ø 20 mm -Protection rating: IP 54 -Quantity: 1x motors available -Dimensions: 540/330/H220 mm -Weight: 24kg/piece

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Hollow shaft: Ø 14 mm -Construction: B5 -Number: 1 motors available -Price: per piece -Dimensions: 370/190/H215 mm -Weight: 15 kg

Minimum quantity lubrication, coolant lubrication device, cooling spray device, oil spray device -pneumatic: driven -Tripping: electrical -Oilcontainer -Dimensions: 200/230/H375 mm -Weight: 2 kg

Paint mist extraction mobile with 3 meters flexible slauch

Brand: Martin Type: Table milling machine with heavy tenon table Spindle: ø30 mm Motor: 4 KW

Brand: Martin Type: T25 M-No.: V172604 Year of construction: 1990 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Automatic milling spindle start-up/bremzing via rotary knob Control panel: eye level with digital reading Spindle height -5° - +45° electromotive angle adjustment with digital readout Inclination -5° - +45° 150 mm Electromotive heights Adjustment with digital readout Feed: five-pole. Socket with operation via central control

Swing Chiselstemmer Measuring machine Stemmer swing chisel

approx. 452 shelves Meta, 1m x 0,40m / 0,60m - used - : Price per shelf: 8.-€ (net)! Minimum order: 50 pieces Manufacturer: Meta Type: Meta Clip Year of construction: unknown Depth: 60cm Width 1m = approx. 52 pieces Depth: 40cm Width 1m = approx. 400 pieces Shelves are partially knocked out or slightly bent on the holders for the floor supports. But a blow with the hammer should be enough so that they can be hung up again without problems. Height: approx. 4cm Payload: unknown – would have to carry at least 100kg Condition: good Available: as of now Location. Frankenberg / Saxony

Gear motor, electric motor, three-phase motor -Speed: 61.3 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: 28 mm -Protection class: IP 54 -Dimensions: 200/200/H425 mm -Weight: 26 kg

Lawn building machine Sembdner RS 60 R, working width 60 cm, drive F&S 2-stroke petrol engine. Reversing gearbox for forward and reverse travel. Equipment: smooth roller with scrapers at the front, hedgehog with cleaning cage in the middle, smooth roller with scrapers (water-fillable) at the rear, seed container with brush shaft and dosing slide. Technically good condition, but with flash rust and engine without ignition sparks - does not start. Branded product from Munich (Germany). Shipping optionally possible.

For sale, completely overhauled flour packaging machine 1kg. The machine includes a auger feeder with a mixer as well as an automatic gluer. Capacity approx. 1t per hour (20kg/min).

Martin T45 Thickness Planer Brand: Martin Type:T45 Main motor 5.5 KW - 400 V Speed 5,000 or 6,000 tpm Knife shaft Z-4 Tersa Flight circle ø125 mm Planer width 6,300 mm Planer thickness 2.8 - 300 mm Spahn removal max. 12 mm Thickness table length 1,260 mm Feed 6-12 m/min. weight 1.500 KG Condition: NEW Price Dealer price: Options: Planing shaft: X-Plane planing shaft with 4-fold reversible blade T45 Contour: Machine for profiling, with Z-4 Tersa, Z-2 Contour profile inserts T45Plastic: Machine especially for plastic processing Motor 7.5 KW, 11 KW and frequency controlled Thickness table extension: import and export side640 mm or 1,200 mm Feed: Frequency control from 2 to 25 m/min. Indent: Articulated feed whales Pull-out whales: Second pull-out whales Machine lubrication: Central with hand pump or automatic Table bezel: import has been atta ...

Brand: KAMRO Type: DAK510 Year of construction: 1978 Planer width dresser/thickness planer: 530 Knife shaft: ø120mm, Z-4 tersa or X-Plane Speed: 5,000 rpm Motor: 4 KW Feed rolls: imports Toothed steel, Export rolls: rubber Planing height: 3 - 250 mm Table length dresser: 2,300 mm Table length thickness table: 920mm Chip removal: 8mm Feed: 6/12 m/min weight: 1050 KG Options: X-Plan Wave SuvaMatic Motor: 5.5 KW or 7.5 KW Open table electrically Feed frequency control

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.25 kW -Speed range: 358-1850 rpm -Motor: adjustable -Shaft: Ø 11 mm -Construction: B5 -Number: 1 motors available -Dimensions: 300/180/H190 mm -Weight: 9.8 kg

:::SPECIFICATIONS::: CNC Model: Siemens Tool connection: SK 40 Spindle power: 9Kw Number of spindle revolutions: 12000 Number of tools: 30 X Shaft Stroke: 600mm Y-axis stroke: 450mm Z-axis stroke: 450mm Rapid feeds linear axes X Y Z: 35m/min Guides: roller Tilting rotary table: yes Round table type: continuous Tilting rotary table grades: + - 110° Table size: diameter 280mm Load allowed on the table: 200Kg Chip evacuator: carpet Other technical data: maximum tool diameter 80 (125) mm Chip/chip time change 5.5 sec Working feed speed 1 - 30.000 mm/min Resolution 0.001 mm :::D IMENSIONS AND WEIGHT::: Length: 3500mm Width: 3500mm Height: 2800mm Weight: 6500Kg

Brand: Martin Type: T54 Year of construction: New Motor power: 5.5 kW Knife shaft speed: 5,000 tpm Knife shaft: Z-4 Tersa, ø125 mm Planer width: 5000 mm Spahn removal: max.8 mm Table length: 2.850 mm Task - Table length: 1.640 mm Removal - table length: 1.200 mm Table height: 855 mm Dressing stop: Aigner stop, 45°Movable with dunn material planing strip weight: 1.200 KG

Gear motor, electric motor, electric gear motor -Speed: 4.0 rpm -Power: 0.55 kW -Diameter shaft: Ø 38 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 755/240/H240 mm -Weight: 44 kg

Gear motor, electric motor -Speed: 23 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: Ø 25 mm -Protection class: IP 54 -Brake -Dimensions: 500/150/H280 mm -Weight: 20 kg

Gear motor, electric motor -Speed: 57/114 rpm -Power: 1.1/1.8 kW -Construction: B5 angle -Diameter hollow shaft: Ø 28 mm -Protection class: IP 54 -Brake -Dimensions: 570/250/H250 mm -Weight: 37 kg

Many thanks for your interest in our machinery, please find below our offer: Manufacturer : Low & Duff (Ladco) Macintyre Type : PG 50_Pre-Blend / Pre-Mix Refiner System Batch : 5000kg Year of made : 2004 Electrical : 400V 50 Hz, 3Ph Enginepower : 30 kW Maindrive engine different : Chocolate Pump : on Top is installed a Mixer with small 2-Roll Refining Unit with re-circulation Pre-Refine the mass prior then to transfer to bulk chocolate refining/conching, to create a cleaner environment, and reducing time & costs to produce high quality chocolate.

Gear motor, electric motor, three-phase motor -Speed: 200 rpm -Power: 0.75 kW -Construction: B5 angle -Diameter hollow shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 520/250/H220 mm -Weight: 26 kg/piece

Folding machine Make MBO Model T49-4 Year 1984 Maximum size 490 x 850 mm Configuration Feeder Flatpile feeder 1st station 4 plate buckles 490 mm Delivery belt delivery Details with batch counter, noise hoods, vacuum pump Available direct