mak 20 used for sale

Ladies and gentlemen, we may, on the basis of our general terms and conditions of delivery and payment for the trade in used machinery and equipment, offer you the following: Ladies and gentlemen, Offer: 1 piece br. Aluminium continuous casting plant, Make: SMS 3200 tons Price: € net, on request from the location. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection i ...

Cat. No. 06-1101-8 new with lid-round standing on feet from V2A – 2,000 litres top quality for the favorable price, the best high-grade steel to German Institute for Standardization welds minimally, stable feet standard equipment: material V2A, 1.4301 according to. German Institute for Standardization 17440, inside 3IIId=2B – outside marbles completely pickled, passiviert and neutralises rest outlet DN 50 level indicator with strip and scale swimming lid completely with accessories air-bleed valve and bleed valve air pump transport hooks for lid on / from state feet volume: 2,000 litres Diameter: 1,310 mm Cyl. Height: 1,500 mm Total Height: 2,165 mm feet: 3 surcharges upon request For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, exc ...

manual roll gap adjustment 2x7.5 kW motor Bearing Oil circulation lubrication adjustable roller speed 10-41 rpm BJ 1990

Basic refurbished Parta U II Cladding sheets new made of stainless steel All wear parts are renewed, Machine is completely rebuilt, Chamber and rotary vane correspond to a new machine, incl. 2 Mehler/ Or Öler Conveyor belt right/left defined position stop stepless speed control Warranty 6 months Suitable for different doughs Weight ranges: 1 chamber 300-2800gr 2 Chamber 110-1250gr Optional: Drop wave Large funnel etc Machine can be tested with dough at any time Delivery and commissioning as well as training possible.

technical data: Make: AEG Type: AM 200 L4 Connection: 380 V / 57 A kW: 30 kW rpm: 1470

Cat.-Nr. 11-3325 in a very good condition for Cosmetic and food stuff Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160 °C Temperature resistant Manhole and Sight Glass with lighting CIP cleaning injection nozzles aso. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

used approx. 2 m ³ / 2,000 litres polyester tank, GRP tank, transportation tank, Juno-tank, good condition Dimensions: L = 1.66 m 1.10 m = B; H = 1.50 m (without feet). H = (total) 1.75 m Aboveground vertical tank, incl. 4 steel feet/cones, dome on the front, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers  ...

Kragarmregal, double-sided, 5.18m height, 1.20m arms, 870kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,495.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 100 with 2x3 each. Arms 1.20 m, 870 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 adjustable shelf arms each with centre of gravity 600 mm 870 kg per arm / 2610 kg per stalker with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors . Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,295.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 each. Arms 1.20 m, 500 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf armseached carrying capacity at load centre 600 mm 500 kg per arm / 2610 kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Swing mill for iron-free grinding or micronizing of chisels (solid sum content 70 - 78%), grinding chamber lined rubber, drive 22 kW. Task size: Up to 5 mm; final fineness: 4 microns. Last used grinding body: 7.5 to. Cylpebs, 20 mm x 20 mm (not included).

Kragarmregal, double-sided, 4,16m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.850.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 4160mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per stem with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 3,50m height, 1,20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 staenders 1.750.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 3.50m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 3,50m height, 1,20m arms, 750kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.900.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 3.50m high, hot-dip galvanized IPE 160 / 100 with 2x3 each. Arms 1.20 m, 750kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3-adjustable helving armseached each carrying ability at load centre of gravity 600 mm 750 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New

Pipe conveyor screw with 270 mm diameter and 5,200 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral rise: 125 mm.

Batch horizontal mixer in standard steel version, lined inside with carbide, useful filling up to approx. 800 l.. Drive over 37 kW motor, Flender head gear and start-up clutch, equipped with 2 flanges for optional knife heads / choppers. Slingshot shaft with armoured Becker shovels (as good as new). Incl. basic frame for mixer, gearbox, fluid coupling and motor. Sandblasted and repainted.

Kragarmregal, one-sided, 3m height, 1.20m arms, 500kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 staenders 1.150.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf edges on one side approx. 3,000 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable shelf arms carrying ability at load centre 600mm 500 kg per arm / 2250 kg per stem at 4 staenders per arm level 4 x 500 kg = 2,000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves of 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors.; New

Kragarmregal, one-sided, 3m height, 1.20m arms, 750kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 staenders 1,295.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf divider on one side approx. 3,000 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable shelf arms carrying ability at load centre 600mm 750 kg per arm / 2250 kg per staender at 4 staenders per arm level 4 x 750 kg = 3,000 kg with laengs and diagonal connectors e = 1300 mm with a row of shelves of 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! ; New

Kragarmregal, one-sided, 4,16m height, 1.20m arms, 750kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 pcs 1.450.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf divider on one side approx. 4160 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable helving arms carrying ability at load centre 600 mm 750 kg per arm / 2250 kg per stem at 4 staenders per arm level 4 x 720 kg = 3,000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves with 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New

Kragarmregal, one-sided, 3.5m height, 1.20m arms, 750kg per arm - New ware - : Price from location incl. loading! 1 shelving unit with 4 pcs 1.350.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: shelf divider on one side approx. 3500 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable helving arms carrying ability at load centre 600 mm 750 kg per arm / 2250 kg per staender with 4 stems per arm plane 4 x 750 kg = 3000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves with 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New

Doka 3-ply sheets provide the basis for many Doka formwork systems and have a wide range of uses. Doka has the right solution for all requirement, covering anything from standard applications to rentable panels. Multiple use and prevention of positive imprints through closed surface on both sides coated with high-quality melamine resin. Lower costs for finishing work based on high dimensional and angle accuracy. Type: 3-ply formwork sheet made of spruce, crosswise glue-bonded, with edge strip Surface: urea-melamine resin adhesive high degree of format accuracy

Hall 8.000 m ², 40 x 200 m, 7 m high (eaves) steel Hall / steel construction, self-supporting,. -Sheet metal walls, w/o roof sheet, self removal -smaller units possible, German Hall

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 20,000 litres Diameter: approx. 2,000 mm Length: approx. 6,840 mm Weight: approx. 4,000 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Technical data for the pallet rack traverse: Shelving system: Redirack Included in delivery are: 01x pallet rack traverse, used Material color: yellow Box profile: 120 x 50 mm Clear width: 3,205 mm load per pair of trusses 2,575 kg, at the same time. distributed load 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried o ...

all stainless steel max. load 1.000 kg (depending on the product) with new control Variotronic with new vacuum pump Busch 63m³ 3 speed engine : 1 / 2,8 / 3,4 rp/min dimensions (l x dpt x h) : ± 2.080 x 1.560 x 1.920 mm

Hello all We have the following spares for Wartsila 32 LN Cylinder heads 24 pieces used Connecting rods 12 pieces used Fuel pumps 12 used 1 piece new Pistons 12 pieces used 1 piece new Cylinder liners 12 pieces ueed camshaft pieces 12 pieces used injectors 12 pieces used All of them are dismantled from 2007 built Wartsila 32 LN engine with low running hours and are in really good condition We also have in our warehouse brand new consumable spares for Wartsila 32LN such as: exhaust and inlet valves, valve seats, guides, piston ring sets, main bearings, big end bearings , nozzles , cylinder head gasket sets, anti polishing rings and much more Please contact us at: infofin-marine

new all stainless steel discharging height ± 1.770 – 2.250 mm mobile

Hydraulic pressure filter, 200bar, 34P-0014, Parker, used - overhauled Special price (The cheapest current new price in the market is more mthan € 3000 excl. VAT) If you have a VAT number, we will gladly issue you an invoice without VAT. Used part - overhauled! The part was purchased from a company's spare parts warehouse, has been overhauled, reconditioned and is fully functional. Manufacturer Type designation: 34P-0014 Max. operating pressure 200 bar 565L/min Micron Rating 20Q G1 1/4" incl. new filter element Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude  ...

Hydraulic pressure filter, 200bar, 34P-0016, Parker, used - overhauled Special price (The cheapest current new price in the market is more mthan € 3000 excl. VAT) If you have a VAT number, we will gladly issue you an invoice without VAT. Used part - overhauled! The part was purchased from a company's spare parts warehouse, has been overhauled, reconditioned and is fully functional. Manufacturer Type designation: 34P-0016 Max. operating pressure 200 bar 565L/min Micron Rating 20Q G1 1/4" incl. new filter element Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclud ...

Fuel canister 20l incl. spout Content 20 l Width 165 mm Length 345 mm Height 470 mm Material: sheet steel Weight 4.3kg Colour: Traffic red RAL3000 or zinc yellow RAL1018 - Incl. spout - With lever lock and safety device - Suitable for all types of fuel - Painted inside and outside to be fuel-resistant - TÜV tested Negotiation price: € 19,- net from stock Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

The BTS drum press PLC auto is ideal for compressing 30 to 220 litre steel drums, but it can also be used to compress plastic and cardboard drums very easily. In many cases this compressed recyclable material can then even be remarketed. The barrel press is particularly characterized by its reliable and easy operation. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, save significantly on your disposal costs and properly return the material to the recyclable material cycle. Pressing force: 24 tons Machine dimensions: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compression: 8:1 Pressing time: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phases) Noise: 68 dB PLC control with automatic pressing cycle 30 litre drip pan with drain tap Pressing punch with mandrels for pi ...

Woodward / Wärtsilä LinkNet 6 CHANNEL 4-20 mH INPUT in original packaging ! See photos !

Mixer Falterbaum Typ Famix 20000 Capacity: 20.000 ltr./h year of manufaturing: 1992 with Bran & Lübbe dosing pump incl. switch board The machine is mounted on a stainless steel base plate

Gearboxes, spur gear units used HANSEN Type: D743CT3 Translation i: 203 Shafts approx. Ø 50 / 150 mm Dimensions: approx. 1750 x 900 x 800 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

The AutoDoor AD200 is a powerful, electrically operated door opener for CNC machines with a stroke of 2000 mm. The system offers an integrated safety function in accordance with EN ISO 13849-1 PL d and does not require external light barriers or safety edges. Thanks to the standard mounting brackets and Harting connectors, the AD200 can be quickly installed and seamlessly integrated into any CNC machine. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrat ...

BTB TRO 8S 14U ISO 40 CNEL Transfer Machine (2017) Basic Information: Manufacturer: BTB Transfer SPA, Italy Serial Number: BB 881-2017 Year of Construction: 2017 Mass: 23,000 kg (23 tonnes) Machine Analysis: A high-precision rotary transfer machine A specialized type of automated manufacturing equipment used for high-volume production. Multi-station automated production Complex part processing with multiple operations Technical Specifications Stations: 8 machining stations Units: 14 machining units Control System: CNC-controlled (likely Siemens or Fanuc) Tooling Interface: ISO standard, facilitating compatibility with various tools Machining Capabilities: Simultaneous multi-axis operations, including drilling, milling, tapping, and turning Workpiece Handling: Automated loading and unloading systems Coolant System: Integrated high-pressure coolant delivery ISO 40 ...

Tuttnauer T-Edge 10 W Tabletop Autoclave The T-Edge 10 and T-Edge 11 are space-saving benchtop autoclaves that give you high-speed, Class B performance. You'll save time so you can help your patients while meeting current international standards and regulatory requirements to protect your staff and patients. Fully automatic autoclaves that give you time to treat your patients. The T-Edge 10 and T-Edge 11 autoclaves operate daily without interruption, providing efficiency and safety. User-friendly touchscreen control panel. Quickly view programs, cycle times, water levels, and more. Advanced documentation and traceability options. For security and regulatory reasons, scan barcode data (including expiration date) for the patient record during treatment. Personalized username and password Printouts to store printouts (optional printer). Sophisticated data analysis capab ...

Gear motor, electric motor, three-phase motor -Speeds: 200 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 22 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 370/160/H205 mm -Weight: 12.8 kg

Gear motor, electric motor, electric gear motor, angular gear motor, automatic band saw -Manufacturer: Ruhr gear, angular gear motor -Type: NDK 8760 -Speed: 3000 rpm -Voltage: 200 V/0.15 A -Shaft: Ø 10 x 30 mm -Accessories: V-belt attachment incl. -Dimensions: 245/160/H155 mm -Weight: 4.5 kg

Overhead crane, crane, electric hoist, lifting device, motor winch, motor winch, tackle, winch, pulley system -Rated load: 2,000 kg with pulley -Lifting speed: 5/15/30 m/min -Steel cable: Ø 8 mm -Lifting height: approx. 30 m -without operation -Dimensions: 1600/330/H470 mm -Weight: 356 kg

Magnetic drill, hand drill -Magnetic base: Magnetor type PS 32 L -Drilling machine: AEG type HBE-IV - Recording: MK2 -Max. Drill: Ø 23 mm -Connection: 265V/200Hz -Dimensions: 700/300/H670 mm -Weight: 49 kg

Mecalux roller conveyor Roller conveyor 2030-540-450 RA1928 Make: Mecalux Roller width (RB): 450 mm, Steel rolls Nominal/outer width (NB): 540 mm length: 2030 mm Rolls diameter: 50 mm Roller distance 75 mm Overall height frame: 130 mm 2x ITOH-Deki 16936/010 24V Roller drive Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/s Scope of delivery: without supports Optionally available: Supports Side guide one-and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 Electric data: 24V ITOH-Deki condition: very good (used) Conveying length in mm: 2030 Nominal / outside width in mm: 540 Roll width in mm: 450 Roll division in mm: 75 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e- ...

Fan, fan, electric motor blower -Fan electric motor: 2000 W -Speed: 2850 rpm -Voltage: 380 V -Protection class: IP 54 -Price: per piece -Number: 4 pieces -Dimensions: Ø 160/325 mm -Weight: 17.2 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Motor comes from a Weisser Heilbronn Type 29 CNC lathe -Speed: 2000 rpm -Power: kW -Design: B5 -Shaft diameter: Ø 30 mm -Quantity: 1 piece available -Dimensions: -Weight: 20 kg

Cleaning fluid, cooling fluid for spindle oil cooler, spindle cooling for machining center -Number: 9x containers with 200 liter cleaning fluid -Price: complete -packed on: EURO pallet -Weight: 252 kg

SOCO RA2029 Technical data: Conveyor length (NL): 2010 mm Framework width (NB): 670 mm belt width (GuB): 580 mm height (BH): 110 mm support feet: optionally available Conveying speed (v m/s): 0,33 Drive: gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Feature: Massive design, belt run surface metal instead of wood Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 2010 Nominal / outside width in mm: 670 Belt width in mm: 580 Driven: YES Engine type: Nerimotori KW: 0,55/S1 Conveyor speed m / s: freely adjustable, 0,333 scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of ...

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 200 rpm -Power: 0.4 kW -Construction: B3 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Height shaft axis: 64 mm -Price: per piece -Number: 2x available -Dimensions: 430/172/H225 mm -Weight: 19 kg