mak 20 used for sale

Press brake manufactured in 2022. This DENER DDS 2090 features a bending length of 900 mm and a pressing force of 20 tons. The machine is practically unused and comes complete with tooling. If you are looking to get high-quality bending capabilities, consider the DENER DDS 2090 press brake we have for sale. Contact us for further details.

Key data: 200 t

Horizontal Hydr. Straightening and bending press, 200 tons, hand and foot control, hydraulics. 18kw, with bending tools.

This 6-axis FANUC CRX-20iA/L robot arm was manufactured in 2024. It features a maximum load capacity of 20 kg and a reach of 1418 mm. The robots joints have extensive motion ranges, enhancing its flexibility for complex tasks. If you are looking to get high-quality automation capabilities, consider the FANUC CRX-20iA/L machine we have for sale. Contact us for more information.

This 3-axis HEDELIUS C60 - 2000 vertical machining centre was manufactured in 2007. It features an impressive X-axis travel of 2000 mm, Y-axis travel of 620 mm, and Z-axis travel of 520 mm. The machine is equipped with a powerful 18.5 kW spindle and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the HEDELIUS C60 - 2000 machine we have for sale. Contact us for further details.

Key data: 2050 mm, 4 mm

Used guillotine shears of the make Vimercati type 2050x4 Year of manufacture 1997

Length work table: 600 mm Width work table: 320 mm Work table height: 850 mm Max. drill length: 240 mm Max. Traverse stroke: 200 mm Vertical stroke: 150 mm Tilting of the boring head: 45° 0° 45° tool clamp 0-20 mm Revolutions: 2860 tr/min Motor Power: 2,2 KW

This 6-axis FANUC M-20iA robot arm was manufactured in 2015. It features a maximum payload of 20 kg and an impressive reach of 1,811 mm. The robot can be mounted in various configurations, including floor, ceiling (inverted), and angle mounting. If you are looking to get high-quality automation capabilities, consider the FANUC M-20iA robot arm we have for sale. Contact us for further details.

Weinig Unimat 2000 four-sided planer Working width 230mm Working height 160mm Number of spindles 8 Spindle system Down 11kw 12.000r.p.m Right 7.5kw 6000r.p.m Left 11kw 12.000r.p.m Right 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 30kw 6000r.p.m Inverter-adjustable feed speed up to 36m/min 4 drive rollers in the work table Pneumatic Material Clamps Total power of the machine 106kw Year of manufacture 2002

Banding / Banding Machine ATS Tanner Type US 2000 AB With ultrasonic tape welding, suitable for plastic and paper tape with a width of 30 mm. Powerful, proven technology. Strip tension infinitely adjustable via potention meter/rotary regulator. Offer price 3000,- EUR EXW or 3,500 EUR incl. packaging & shipping with transport insurance.

M.T.A.A ARIES TECH 2 105 HE, R410a New model year 2025:, 338 kW effective cooling capacity,, water inlet/outlet 20°/15°C, Ambient temperature +35°C, 4 hermetic scroll compressors and 2 refrigeration circuits, 4 condensers consisting of copper tubes and aluminium fins (NOT micro-channel), Shell-and-tube evaporator, Evaporator anti-freeze heater, -20°C ambient temperature kit option, Electrical panel heater, Brushless EC fans, availability: in stock, capacity: 338 kW cooling capacity, conditions: new machine, type: chilling unit

M.T.A.ARIES G 065 HE - new machine, Green R454b refrigerant, 150.000/200,000 BTU (174 / 232 kW), 198 kW effective output, Water IN/OUT 20°/15°C, Ambient temperature +35°C, Green R454B refrigerant, -- Global Warming Potential (GWP) = 467, which complies well in advance with the new F-Gas Regulation (EU) 2024/573, due to come into force on 1 January 2027 with a GWP ≤750 --, Shell-and-tube evaporator, 500-litre storage tank, P3 pump, Constructor Description:, The Aries G series liquid chillers are air-cooled units designed for outdoor use (electrical control panel protection rating IP54). All units are designed, manufactured and tested in accordance with ISO 9001 standards. The design of this range has focused on achieving full-load and seasonal efficiency ratings that meet the limits imposed by eco-compatible design regulations (ErP Tier 2 Compliant) for SEER and SEPR HT ratings, whil ...

Code: 0366 Brand: HIRZT - ITALY Model: B 200 - CE Standard Automatic edge bander for pre-glued tapes, for furniture, custom-made furnishings, woodworking shops, panels, doors, kitchens, bathroom furniture, and various - CE Standard Features: Feed track and pressing unit with rubber rollers 70 mm and elipsoidal groovings to ensure a perfect panel feeding Powerful blower equipped with air filter End trimmer by automatic guillotine with free unloading of the exceeding pieces of tape Infeed fence adjustable according to the tape fitness through a four-face stop thickness adjustment Technical data: Panel height 10-40 mm Max edge thickness 0,5-2 mm Trimming motor speed 9000 rpm Trimming cutters diameter 70 mm Adjustable front support Suction inlet diameter 100 mm Installed power 3,2 Kw Compressed air 6 bar Overall dimensions mm 1850 x 900 x 1350 h Weight kg 420  ...

Description DÖRRIES SDE 200 Vertical Lathe Details Type SDE 200 Machine number K240/50662 Year of manufacture 1977 Face Plate 2,000 mm Circulation 2,200 mm Turning height 2,150 mm Max. table load at reduced speed 20 to incl. documentation

Bread roll system Year of construction 2010 consisting of: Head machine MINI REX Futura Proofer G 2000 with Stüpfler for Kaiser, with long-rolling station

Ref. №: 4365 Bin washer Type: NIEROS CL-K 200 D For washing: Eurobins – 200 l. Capacity: up to 40 bins/h depending on pollution Power: 28 kW Voltage: 3 x 400 V, 50Hz Machine dimensions in cm: Width: 170,0 Depth: 160,0 (when lid open 290) Height: 190,0

Sevenchefs DC-203 dicer dicing machine. Blade assembly included with spare parts included. This item was purchased brand new and only used for 2 months. This is in impeccable like new condition.

Consisting of a TBA 19 V 100 125ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak straw applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

Key data: 200 t

DURENDUS 200 T Workshop Press – Single Column Press – 1,500 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 10.750 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement of the ...

Consisting of a TBA 19 V100 200ml Base Filling Machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak Straw Applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.

sheet width: 2040 mm plate thickness: 4,0 mm distance between columns: 2100 mm roll diameter: 150 mm total power requirement: 7,0 KW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,95 x 1,0 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Rear roller electrically adjustable - Conical bending - Foot switch - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 9-axis TAKISAWA TM-2000Y2 CNC Horizontal Turning Center was manufactured in 2022. It features a twin turret configuration with dual Y-axis capability, allowing for simultaneous machining. The machine includes a sub-spindle for complete machining and is compatible with bar work. If you are looking to get high-quality turning capabilities, consider the TAKISAWA TM-2000Y2 machine we have for sale. Contact us for further details.

Fluid bed manufactured by INOJETT in 2004. Model IEV800-001-2004 Peripherals included: DFO 4-32-R baghouse Air heater Technical characteristics Model IEV800-001-2004 Year of manufacture 2004

An electric plate vacuum lifting frame Framatech with tilting function is available, load capacity: 2000kg, suction frame dimensions X/Y: approx. 1200mm/2400mm, suction pads: 16, suction pad diameter: 290mm, dead weight: approx. 400kg, documentation available, an on site inspection is possible.

Tumbler Henneken -Capacity: 2000L -Dimensions: 2400 x 1500 x 2100 mm -Busch vacuum pump -Made of stainless steel -Condition: Used in very good condition, overhauled, ready to work

I am selling a vertical continuous CNC milling and drilling machine HOMAG Weeke Drillteq V-200 (formerly BHX 055), built in 2023. Configuration: 1 pc. milling unit with tool change 4-positions HSK63 13 + 4 + 2 pcs Drilling Spindles 1 pc grooved saw Feed back, which slices the elements back to operator or rear as the conveyor machine. Condition as good as new. With full documentation and CE Available the same.

The machine is in good technical condition, after prior agreement it is possible to test it. ideal machine for complete machining in one clamping (turning + milling). Equipment and parameters: - main spindle + counter spindle (complete machining from both sides) milling spindle with B axis Mazatrol SmoothG control 36-position tool magazine Capto C6 / PSC63 internal cooling large number of accessories (jaws, clamps, holders, etc.) a functional postprocessor for SolidCAM is included in the sale significant time and cost savings when introducing the machine into production

Weinig Hydromat 2000 planing line with in and outfeed system, Manufacture year 2008, Consisting of:, - Weinig automatic infeed system High Mech E1, - Weinig moulder Hydromat 2000, - 6 spindles: B-R-L-T-T-B, - feed speed max. 60 m/min, - straight and profile jointers, - Weinig automatic outfeed system High Mech A1

A CNC vertical machining center Emco is available. Travel X/Y/Z: 420mm/330mm/400mm, table dimensions X/Y: 650mm/320mm, max. table load: 150kg, tool positions: 12, tool holder: SK40, speed: 4500rpm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2400mm/2300mm/2450mm, weight: approx. 2750kg, control: Emcotronic TM02. An on-site inspection is possible.

Spiral mixer, Fabr. Diosna, SPV 200 AF/T

Lippert alignment conveyor inclined roller conveyor 2050-650-530 RA2490 Make: lippert Year of manufacture: Roller width (RB): 530 mm Nominal/outer width (NB): 650 mm Length: 2050 mm Diameter rollers: 50 mm Distance between rollers: 60 mm Roller conveyor motor: SEW drive motor frame height: 100 mm Conveyor speed: contact us Angle rollers: ca. 5° Optional: supports Side guide adapted conveyor speed range with frequency converter Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: gut nominal voltage: 380-500V angle: ca.5° Conveying length in mm: 2050 Nominal / outside width in mm: 650 Roll width in mm: 530 Roll division in mm: 60 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: ohne Frequenzumrichter, without supports and side guides For individual, expert advice, simply get in  ...

General SKU309X465 MakeHaagen &: Rinau LocationBarneveld TypeUnimix Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor30 KW Specified Features - Processing vessel Closed stirring vessel3x Capacity3320 l.(2000 l.)/ 2885 l.(1600 l.) /1445 l. (1200 l.) Dished bottomcheck Slope bottomcheck Dished top sidecheck Flat top sidecheck With covercheck ManholeDN400 Top connectionscheck With jacket2x volume 400 l., 165 l. and 95 l. Max. temperature151°C With anchor stirrercheck With paddle stirrercheck With dissolver stirrercheck Motor18kW, 1450 rpm (EX) With homogenisercheck Motor30kW, 2950rpm (EX) MaterialStainless steel 1.4541 (321) With jacketcheck General No.300975/2290 Year of construction1996 Mounted on legscheck With switchgear( as is) Floorspace7x2,5 m Total heig ...

Swivel spindle milling machine Brand: Panhans type: 245/200 New machine Solid 880 kg machine with smart control system - Infinitely variable speed regulation 1500 - 10,000 rpm, - 7.5 kW motor with 11 kW frequency converter - Pushbutton with electronic soft start 7 touch control, optional use, top and bottom - Cutter zero point selectable in program, 3 reference points - Simple operating menu through innovative touch control (max. 2 levels) - Operating hours counter - Warning messages in case of operating errors - Remote maintenance via Internet (VPN tunnel) - USB interface for data backup and import of tools, programs and users - Tool database for 5 tools (20 programs are possible per tool) - 2-axis positioning control for height and swivel adjustment - Electronic position and speed displays Double-sided swiveling, fixed milling spindle for the swiveling range  ...

used spiral mixer Boku SK 200 A extendable, overhauled, 200 kg dough per kettle, 2 timers, with 1 stainless steel kettle, if required with additional kettles for an additional 4,100€ each, stainless steel spiral, newly painted, clocks renewed, 13.3 kW, 29.8 A, 380 V

Sizing saw Brand Panhans Type: 680 / 200 New machine Basic construction - Solid German machine construction - approx. 1150 kg - Machine body manufactured as a stable welded frame construction from strong-walled steel profiles. - The torsion-resistant and finely planed cast iron table top is mounted on the machine body. - The robust and powerful sawing unit built into the machine body is the guarantor for precise saw cuts. - The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guide for height adjustment as well as the circular saw shaft with 2 ball bearings ensure absolutely smooth running. Supports and stops - The ball bearing-mounted double roller carriage is smooth-running and maintenance-free. Precise and clearance-free running over the full length, guided with hardened and ground prismatic guides ...

Turntable diameter: 1650mm, turntable height: 65mm, mast height: 2560mm, max. load capacity: 2000kg, max. pallet dimensions X/Y/Z: approx. 1200mm/1100mm/2400mm. Machine dimensions X/Y/Z: approx. 2600mm/1650mm/2600mm, weight: approx. 550kg. Documentation available. An on-site inspection is possible.

We are selling the stock of the soap factory Riesa here In the last picture you will find an overview picture of the production hall with the machine inventory. Here we offer you: 1 palletizing robot 6-axis robot, for payloads up to 165 g, set to Euro pallet dimensions, robot reach 2655 mm, The robot is energized due to programming, installation dimensions 771 x 610 mm, average power 2.5 kW, electrical voltage 380 - 575 V, mechanical protection IP54, wrist and arm protection IP67 The plant was shut down in 2024. Roller conveyor and feed conveyor belt can be purchased for an extra charge

Key data: 600 mm, 200 mm

Magnet Nalex Type: 20/60 Plug 32 A Length 1.4 m Width 2 m Height 1.8 m Weight 2.8 t

Henkovac TPS 2000 Automatic Traysealer – Excellent Condition – In Stock (Netherlands), We offer a very clean and well-maintained Henkovac TPS 2000 traysealer, equipped with a powerful, 160 m³/h Busch vacuum pump, now available directly from stock at STC Food Solutions in Emmeloord, The Netherlands., This machine has been taken straight out of production, is in excellent working condition, and ready for immediate use., With 1/2 Gastro tooling; 325 x 265 (2x), ---------------------------------------------------------------, Key Features, - High-capacity automatic traysealer for MAP and vacuum packaging, - Equipped with integrated Busch vacuum pump (160 m³/h), - Dual mould system – seal two trays simultaneously for high throughput, - Suitable for a wide range of food products (meat, ready meals, vegetables, etc.), - Quick and easy mould change system, - Transparent cover for excelle ...

A rotary can seaming machine with double seaming function CCC is available. Stations: 6, can diameter range: 202mm-502mm, can height range: 100mm-700mm. An on-site inspection is possible.

A rotary can seaming machine with double-seaming function CCC, which was overhauled by Schmalbach Lubeca, is available. Throughput capacity: 360cans/min, can height range: 77mm-285mm, stations: 6. An on-site inspection is possible.

Key data: 2040 mm, 1 mm

used Schechtl hand-held guillotine shears, with hand back gauge, extendable from the front Sheet metal support, automatic. Hold-down Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 2040 mm Blechstärke Stahl/Sheet thickness steel 1,25 mm Sheet thickness Alu 1.75 mm Blechdicke VA/Sheet thickness stainless 0.80 mm Farbe/Colour grün Machine Weight: 650 kg Dimensions/Space requirment 2442 x 756 x 1056 mm Cutting gap adjustment without Automatic hold-down Fixed cutting angle Backgauge min. 5 mm Back gauge max. 500 mm Maschinennummer/Machine number 8604

Pump Manufacturer: Dynamic Pumps Pump Type: FTB 200-150-315 Engine manufacturer: KSB Motor power: 30 kW Speed: approx. 1470 rpm at 50 Hz Flow rate: approx. 300 m³/h Lifting height: approx. 21 m Voltage: 400 V Triangle / 690 V Star at 50 Hz Degree of protection: IP55 200 mm suction connection 150 mm pressure port 315 mm impeller diameter Single Stage Centrifugal Pump axial entry (front) radial exit (top)

Functionality must be checked, possibly usable as a spare parts carrier.

Key data: 1800 KW, 2240 kVA, 415 V

Diesel Generator 5 x CAT 3516B 2000 kVA / 50 Hz – 2023 Never Installed Never installed, surplus CAT 3516B skid mounted diesel generating sets. Engine is coupled with 2000 kVA / 415 V / 50 Hz Leroy Sommer DSG 74L1 brushless synchronous alternator with a flexible coupling, and both mounted on a rigid base frame. These units are designed for standby and prime duty. Main engine control panel EMCP, 24V electric starting system. Technical data Engine type CAT 3516B – 16-cylinder, 1500 rpm diesel engine Alternator Leroy Sommer 2000 kVA / 415V / 50Hz Power factor 0.8 Manufacturing year 2023 Operating hours Zero, never installed Number of units available 5 pcs Prime rating 2000 kVA (1600 kW) Stand by rating 2240 kVA (1800 kW) Control system EMCP 4.2

Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with adjustable feet -Length: 7990 mm -Width: 2480 mm -Height: 350 mm -Sheet thickness: 30 mm -Quantity: 2 mounting plates available -Price: per piece -Transport dimensions: 7990/2480/H350 mm / 1200/800/1000 mm/piece -Weight: 9500 kg/piece

A horizontal CNC rotary transfer machine Sinico for tube and bar processing is available. Throughput capacity: approx. 2500pieces/h, max. cutting capacity: 110mm, max. workpiece length: 350mm, max. tube diameter: 81mm, max. bar diameter: 40mm, tool holder: HSK-63, machine weight: approx. 16000kg. Documentation available. An on-site inspection is possible.

Key data: 160 KW, 400 V

Vissmann Vitobloc 200, Enine MAN E2878 E312, 160KW electric approx. 210KW thermal, approx. 50,000h all maintenance and overhauls carried out. 2 pieces available.

CNC lathe Type: GLS-200 Manufacturer: Goodway Year: 2016 Control: Fanuc Oi - TF Hours: 4851 Max. swing diameter: 500 mm Swivel seat diameter: 310 mm Max. turning diameter: 360 mm Max. turning length: 500 mm Max. load capacity: 85 kg HOWA chuck size: 8 Rod diameter: 65 mm Hole through spindle: 76 mm Spindle bearing diameter: 110 mm Spindle: A2-6 Spindle speed: 45 - 4500 rpm X: 1210 mm Z: 520 mm Turret: 12 positions Tailstock Bar feeder Tool probe Scoop for removing workpiece Machine weight: 3,200 kg Dimensions: 2432 x 1643 x 1727 mm Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

A horizontal CNC rotary transfer machine Sinico for tube and bar processing is available. Throughput capacity: approx. 2500pieces/h, max. cutting capacity: 81mm, max. workpiece length: 340mm, max. tube diameter: 81mm, max. bar diameter: 40mm, tool holder: HSK-63, machine weight: approx. 16000kg. Documentation available. An on-site inspection is possible.

General SKU048W209 MakeWestfalia TypeSAK-20036 No.1643130 Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Motor30 KW Specified Features - Separator Separator(1x) Motor30,0 KW, 380 Volt Max. rotor speed4500 Rpm MaterialStainless steel General Floorspace1,8x1,5 M Total height1,5 M Weight2000 KGFeed additivesDiscountCosmeticsFood additivesLubricants & oleoDairySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIBiotechnologyGeneric medicinesSeparatorsOils & fatWestfaliaIndustries > Food & Feed > Feed additivesDiscountIndustries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Chemical > Lubricants & oleoIndustries > Food & Feed > DairyIndustries > Pharmaceutical > Solid pharmaceuticsIndustries > Food & Feed > BeveragesIndustries > Chemical > Dyes & pigmentsIndustries > Pharmaceutical > Biopharmaceut ...