mak 20 used for sale

Inv. Num. : 8517 Type: DS 6001.20PrkBk AF M Producer: MicroStep Created: 2018 Parameters: Control System: iMSNC Software: AsperWin Basic (2018) Switch-on hours: 12800 h Operating hours: 3400 h Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 50 mm Maximum sheet thickness when cutting (stainless steel): 6 mm Maximum sheet thickness when cutting (aluminium): 6 mm Plasma Source: XPR300/A Core Machine height: 2630 mm Machine length: 16735 mm Machine width: 9260 mm Machine weight: 22180 kg Equipment: Technical documentation Drilling unit Wittur DSF 4-19.3-20I. R3-GBL (26 kW) Filtration DFPRO-8 ART501 (11 kW) Automatic loader with suction cups Positioning gripper on the X-side Roller conveyors at the inlet and outlet Conveyor belt at the small parts outlet Automatic calibration of tool geometry for rota ...

Key data: 2075 mm, 1000 mm, 700 mm

Pair of cast iron angle plates Width: 1000 mm Height: 2075 mm Depth: 700 mm Unit weight: 1 T

For Sale: Jenbacher Diane XT - Excellent Condition Item Details: Manufacturer: Jenbacher Serial Number: 18854 Manufacture Year: 2006 Standard: ICE 60439-1 We are offering a Jenbacher Diane XT for sale, manufactured in 2006 and built to the ICE 60439-1 standard. This unit, with serial number 18854, is ready to meet your industrial power needs with reliability and efficiency. Condition: Well-maintained and fully operational. Availability: Immediate.

Transformer Description Manufacturer: Gonella Costruzioni Elettromeccaniche Location: United Kingdom Type: Three-Phase Transformer Power: 1600 kVA Frequency: 50 Hz Year: 1983 High Voltage : 10,000-20,000 ±5%, 92.38 A, 46.19 kV Low Voltage : 400-233.3 V, 2309.99 A

Key data: 40 t, 2000 mm

Inv. Num. : 8524 Type: PPM 20040 Producer: HACO Created: 2015 Parameters: Compressive force: 40 t Maximum bending length: 2000 mm

pressure: 200 t throat: 440 mm stroke: 19-230 mm no. of strokes: 58 Hub/min ram - range of adjustment: 100 mm table surface area: 1450x850 mm ram surface: 900x680 mm hole in the table: 300x300 mm table height: 950 mm tool hole in ram: Ø60 mm weight of the machine ca.: 19 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cooling unit (chiller) - Euroklimat RKO. E-B/ST/AS 201S / Perfect technical condition Year of Make: 2019 Location: Lodz, Poland Description: Cooling capacity approx. 60 kW Refrigerant R290 The device has: -Compressor - Separate container for medium, approx. 200l -Circulating pump -Heat exchanger -Radiator - Fan x 2 Depending on the load, the fans can work at different speeds The device is suitable for outdoor work The unit can work as a heat pump and has heating and cooling functions The device after maintenance, fully functional 3-month operation warranty in Poland All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Size: 1400 mm Equipments: Register punch Good condition

Straightening and welded plate cast steel-grey cast iron strongly ribbedLength 2000 mmWidth 1200 mmThickness 150 mmWorking height 800 mmPanel thickness 35 mm- Substructure made of solid woodWeight approx. 950 kgGood surface; used

Demag Ergotech EXTRA 50-200 BJ2005 for sale/scrapping, but the control is already missing here.Enclosed you will find the photos and technical data of the machine for sale with BJ 2005. The machine currently has a plasticizing unit with 25mm screw (BJ 2014) installed, we sell the original plasticizing unit with 30mm screw that is still working for the machine. The machine worked until it was taken out of service, we installed the control system on another machine.

TIG welding machine, TIG welding machine NIMAK type GS 200 WWIG and electric DC welding machine, E-welding machine also for rod electrodesFabr. No. 26642 Year of construction approx. 1983Power 200 Amp. = 60% ED 150 Amp. = 100% EDEinfinitely variable power adjustment rangeMains connection 380 Volt, 50 Hz, 32 Amp. Plug- 5 meter TIG hose packet- HF ignition- stepless current control and current rise- connection for electrode welding- direct current only- water-cooled- inert gas pressure reducerSpace requirement L x W x H 900 x 590 x 1000

Straightening and welding plate cast steel-grey cast iron heavily ribbedheavyheavy straightening plateLength 2000 mmWidth 1600 mmThickness 110 mmWorking height 600 mmPlate thickness 30 mm throughoutWeight approx. 1000 kgGood condition, good surface; used

Tig Welding Machine L-TEC Type Inverter TIG 200 DCWIG Welding Machine for DC DCFabr. No. 184548 year of construction approx. 1994Power 200 Amp. = 60 % ED 155 Amp. = 100 % EDEinfinitely variable setting rangeCurrent type DC (direct current)Mains connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with central connection and hand torch- with remote potentiometer (foot switch)- gas pressure relief valve- direct current only = DC- HF ignitionSpace requirement L x W x H 850 x 480 x 740 mmWeight approx. 150 kgThe welding test results in very

Hydraulic Machine Vise ARNOBock width: 200 mmJaw height: 60 mmClamping force: 8 ton. Clamping range: 0 to 370 mmOpening width: max 373 mmGuideway height: 140 mm- 2 clamping ranges adjustable via plug-in pins- TurntableDimensions L x W x H: 900 x 400 x 210 mmWeight: 125 kgGood condition; used

High-current EMC filter SCHAFFNER type FS 20364-1200-993 phases, 3 x AC ballast, mains connection module, mains filterInput voltage: 3 x 400 VACEinput frequency: 50 / 60 Hz.Nominal current: 3 x 1200 AAndimension W x H x D: 135 x 260 x 235 mmWeight: 27.5 Kgvery good condition, from stock liquidation, unused2 pieces available, price per piece; used

E-chain hoist, electric hoist, crane DEMAG type DKES 2-200 K V2 DIwith Dematik BUS control via crane system controlFabr. No.61456646 Year of construction 2003Lifting capacity: 200 kgHook travel: 4.0 metersMain lifting speed: 14.0 / 19.2 m/min. Fine lifting speed: 0.20 m/min. Chain size 4.2 x 12.2 mm1 Load train = 200 kg- with control logic DKES2/5 500V- without crane operation- Dematik BUS control via crane system control- without roller chassisMains connection: 400 Volt, 50 HzNominal power: 750 WNenncurrent: 2.4

Handling device, handling system JÄGER HANDLINGManipulator for screwdriving technologyType: Handy-flex 200Horizontal movement: 450 mmVerticate movement: 600 mmLoad capacity: 4 to 10 kgThroat: 150 to 600 mmGuide column vertical: 25 mmGuide columns horizontal: 16 mmTool holder: 33 x 33 mm Screw clamping- Movable in three axes (horizontal, vertical, rotatable)- Rotary encoder KÜBLER for rotary movement type 8.5873.5320.B311. S003 - Displacement transducer BALLUFF for horizontal movement type BTL6-A110-M0450-A1-S115 - 2 pieces of balancer for horizontal movement

Measuring and marking plate cast steel-grey cast iron heavily ribbed STIEFELMAYER comes from a measuring machine with a hand-held measuring armhigh-precision measuring plate with a good surfaceMasch. No. 8530979 Year of construction approx. 1989Length 5000 mmWidth 2000 mmThickness 350 mmWorking height 690 mmPanel thickness 50 mm throughout- 15 height-adjustable feet- very precise and stable longitudinal guides, screwed to the side of the plateSpace requirement L x W x H 5000 x 2120 x 400 mmWeight approx. 7500 kggood surface; used

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 2000 mmWidth: 1000 mmThickness: 240 mmWorking height: 850 mmPanel thickness approx. 30 mm throughout- 5 pieces height-adjustable feetWeight: approx. 1000 kgGood surface; used

Handling device, handling system JÄGER HANDLINGManipulator for screwdriving technologyType: Handy-flex 200Horizontal movement: 300 mmVertical movement: 370 mmLoad capacity: 10 to 14 kgProjection: 250 to 550 mmGuide column vertical: 25 mmGuide columns horizontal: 16 mmTool holder: 26 mm oval with screw clamping- Movable in three axes (horizontal, vertical, rotatable)- 1 piece balancer for vertical movement TECHNA, type 9340, adjustment range 10 to 14 kg- Adjustable latch for the Vertical movement, manual unlocking via

E-chain hoist, electric hoist, crane STAHL type Si T 201-10/2,5No.: 1202373 year of construction 1989Load capacity 250 kgHook travel = lifting height 3.5 metersLifting speed 10 m/min. Fine lifting speed 2.5 m/min.2 load strands = 250 kgCable length of operating bottle approx. 1.4 metersMains connection 400 volts, 50 Hz.- Suspension eye on the top of the craneWeight: 22 kgGood condition; used

Chip conveyor, scraper conveyor with coolant tank BMF type KF 200 K17Ident. No: 0495078 Order No: 915979 year of construction 1992Metal link width 200 mmDistance driver bars approx. 380 mmLength of possible chip removal 1100/2100 mmInsertion length approx. 1350 mmInsertion height 370 mmInsertion width 460 mmHopper width at the top 400 mmHopper width at the bottom 170 mmConveying height - discharge height approx. 1250 mmMotor power belt drive 0.37 kWNetz connection 400 volts, 50 Hz- Drive of the scraper chain via geared motor-

Swing-cut guillotine shears KÖLLSCHEN type BSK 2000/2Fabr. No. 69 1307 Year of construction 1969Cutting length 2000 mmCutting thickness 2 mmStand projection 90 mmWorking height 920 mmMains connection 380 volts, 50 HzEngine power 4 kW- Drive via geared motor with brake and crankshaft- mechanical sheet metal hold-down- manual back gauge 500 mm- stop adjustment via 2 handwheels, rear on the backgauge guide with measuring scale- front side stop left 720 mm- electric foot switch- manual

Tig welding machine DALEX type GL/W 201TIG welding machineMachine no.: 201 0447 Year of construction approx. 1995Power 200 Amp. 35% ED 160 Amp. 60% ED 120 Amp. 100% EDEinfinitely variable adjustment rangeType DC - DCmains connection 400 Volt, 50 Hz, 5.9 kVA, 32 Amp. Plug- 2-stroke and 4-stroke welding device- TIG hose package 8 meters- HF ignition- Shielded gas pressure reducer- Electrowelding for rod electrodes- Fan cooling- Connection socket for foot switch (without foot switch)Space requirement L x W x H 850

Straightening and welding plate cast steel-grey cast iron heavily ribbedformer marking plate and measuring plateheavy straightening plateLength 2000 mmwidth 1000 mmthickness 160 mmworking height 850 mmplate thickness approx. 35 mm throughout- 3 pieces height-adjustable feetWeight with feet 680 kggood condition; used

Straightening and welding plate, cast steel-grey cast iron, heavily ribbedformer marking plate and measuring plateheavy straightening platelength: 2000 mmwidth: 1000 mmthickness: 260 mmworking height: approx. 850 mmplate thickness: approx. 40 mm throughout- 5 pieces, height-adjustable feetWeight with feet: 1250 kggood condition; used

a KM-200-1000 machine with removal robot built in 2006 for sale. The machine is in neat condition and serviced by Krauss Maffei.

Folding machine FASTI type 2095-25-2,5Fabr. No. 94 295 004 Year of construction 1994Useful length 2540 mmmax. Sheet thickness 2.5 mmStroke of the upper beam 380 mmMotor power bending beam 2.2 kWWetz connection 400 Volt, 50 Hz- NC control FASTImatic FM100- one-piece pointed rail 135- controlled back gauge- continuous stop rail- controlled bending angle via control- electric foot switchesWeight 3000 kggood condition; used

Straightening and welded plate cast steel-grey cast iron heavily ribbedheavyheavy straightening plateLength 2000 mmWidth 1500 mmThickness 125 mmBoard thickness approx. 40 mm continuousTable height 880 mm- Table base made of steel (self-made)Weight 1700 kgGood condition; used

Travel X/Y/Z: 1300mm/900mm/1000mm, table dimensions X/Y: 2000mm/750mm, max. table load: 5000kg, rapid traverse: 6m/min. Machine dimensions X/Y/Z: approx. 3650mm/2700mm/2700mm, weight: approx. 9000kg, control: Heidenhain TNC 150. Documentation available. An on-site inspection is possible.

A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible.

Two color pad printer GP 2002. The printer is intended for larger quantity jobs; closed system with foot pedal switch. Diameter of inside cup 6 cm. Format :215x100 mm. Available immediately.

A right-sided Hebrock edge banding machine is available. Workpiece thickness range: 10mm-50mm, min. workpiece width: 70mm, min. workpiece length: 250mm, edge thickness (roll material): 0.5mm-5mm, max. edge height: 55mm, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 3000mm/1500mm/1300mm, weight: approx. 700kg. On-site inspection is possible.

Beck Wand 1000/2000 Extraction Wall Extraction wall Type: Beck Wand 1000/2000 Extraction wall made of sheet steel, with 5 suction slots made of perforated sheet metal evenly distributed. For connection to a central extraction system via a suction nozzle at the top center of the extraction wall. Cleaning opening can be unscrewed at the bottom of the front of the wall. Uses: Extraction of process air during grinding and milling Extraction of gases and light dust Extraction of powder mix or other stationary dust-forming processes Width: 1000 mm Height: 2000 mm + 100 mm nozzle Depth: 300 mm Suction nozzle: NW 250 top center Recommended extraction capacity: 3000 m3/h Paintwork: RAL 5018, RAL 7032 Weight: approx. 75 kg Manufacturer's price: 2970,-€ More items - new and used - can be found in our shop! International shipping costs on request!

for sale 2 MWM year 2010 hours 42 000 complete container installations

Rotary Brush Screen WESTFALIA BSB 200 Properties Type BOD 200 Machines No. 1 684 639 Total height 2500 mm Total length 600 mm Depth 600 mm Manufacturer: Westfalia Separator AG

BILLION 200 T série HERCULE H 780/200 Force de serrage : 200 T - 2000 KN Groupe d'injection : H 780 Diamètre vis. : 50 mm Distance entre colonnes : 500 x 500 mm Dimensions des plateaux : 760 x 760 mm Epaisseur mini/maxi du moule : 280 - 580 mm Course d'ouverture : 560 mm Volume injecté : 422 cm3 Pression matière : 1843 bars Dimensions : 7,1x 2,1 x 2,6 m Poids : 14 000 kg

EyeSys System 2000 Corneal Analysis System The EyeSys 2000 Corneal Analysis System is designed to provide unmatched performance, accuracy, ease of use, and affordability with these key features: Optimal central and peripheral corneal coverage provides complete information for the entire cornea Automatic calibration and automatic data correction ensure greater accuracy of topographic data. Automatic focusing and simple examination paths improve ease of use, speed up the examination process and virtually eliminate all focus differences between operators. Advanced software applications include primary care, co-management, corneal surgery, and contact lens fitting. The unique and patented three-camera technology provides a side-view image of your patient's cornea and enables the use of true aspherical image processing algorithms. Simultaneous positioning of the patient and opera ...

Tetra Pak TBA19 200 ml Slim Aseptic Filling and Packaging Line Complete aseptic carton filling and packaging line designed for 200 ml Slim cartons. This line combines proven Tetra Pak filling, straw application, shrink wrapping, and secondary packaging equipment, making it an ideal solution for dairy, juice, and beverage producers seeking reliable aseptic packaging technology. Line Configuration - The system includes the following Tetra Pak equipment: - Tetra Pak TBA19 200 S Filling Machine - Tetra Pak Straw Applicator 21 - Tetra Pak Multi Shrink Wrapper TFW 72 - Tetra Pak Cardboard Packer 70 - This configuration provides a complete production flow from filling to final carton packaging. 1. Tetra Pak TBA19 200 S Filling Machine - Manufacturer: Tetra Pak - Model: TBA19 200 S - Specification: 648160-0101 - Year of Manufacture: 1998 - Operating Hours: 16,727 h - Filling ...

DMG MORI CTX Beta 2000 CNC turning center was built in 2020 in Italy by Graziano Tortona S.r.l.. This extremely efficient machine is offered together with an extensive range of equipment, which significantly expands the machining capabilities and guarantees the achievement of high repeatability of the manufactured parts. Thanks to additional function packages, it is possible to perform, e.g. precise gear milling or polygon turning. All machining processes are performed inside a large working area by means of a reliable spindle and cutting tools taken from a 12-position turret. The tailstock coupled to the Z-axis moves collision-free on separate sliding guides, mounted on a bed of high thermal stability. This bed is excellent at reducing the influence of heat, while increasing the life of all components and tools. Over its service life, the machine has worked for a total of 6219 hours. ...

Name: CNC cylindrical grinder Machine type: Preise TT60-20L-C1 Machining size range - diam.: 600x2000mm Controller: Fanuc Series Oi Mate-MD