mak 20 used for sale

Engine Brand: LOMBARDINI, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Engine Condition: Core , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 14.4 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 20 , Generator Hz: 5060 , Generator Volts: 230/400 , Generator Amps: 50.2/20.9 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/lombardini-ldw-2004-generator- 20-kva-used/233, , = More information =, , Empty weight: 1.075 kg, Type number: LDW 2004 Generator 20 KVA

Engine Brand: CATERPILLAR, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 123 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 202 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 252 , Generator Hz: 60 , Generator Volts: 480 , Generator Amps: 315 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/used-caterpillar-g3406-generat or-202-kva-gas/22424, , = More information =, , Empty weight: 7.500 kg, Type number: CATERPILLAR G3406 GENERATOR 202

pressure: 200 t stroke: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 2300 kg dimensions of the machine ca.: 2.000 x 1.200 x 2.800 mm Control: Producer: HIDROLIKSAN YOM: new Type: HD 160 Thrust: 160 ton. Stroke: 400 mm Throat depth: 480 mm Total power requirement: 5,5 kW Distance between frames: 1.200 mm Cylinder-Ø: 120 mm Dimensions (LxWxH): 1.800 x 1.000 x 2.550 mm Weight: 1.400 kg Additional information: • solid, welded construction • pressure cylinder lateral adjustable • operating electrical per switch lever / • pressure indication per Manometer • material support per cylinder, adjustable in height • CE-mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 2000 mm plate depth: 3000 mm plate height: 350 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 2500 mm grinding width: 600 mm workpiece height: 800 mm Table dimensions: 2500x600 mm vertical movement: 800 mm throat: 650 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stepless automatic feed for table 3-40 m/min Return feed for table Filter attachment Hydraulic unit Coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Available For sale Gas Generator MWM Type TCG 2016 V 16 1300 KVA Year 2007 Boigas book maintenance

Dematic conveyor accumulating roller conveyors 2625-500-440 RA1995 Accumulating roller conveyor Nominal/outer width (NB): 500 mm Available conveyor lengths (FL): 2625 mm, expandable with further pieces Further information Manufacturer: Siemens Dematic Type: Accumulation roller conveyor Accumulation size: 750 mm Year of manufacture: unknown Condition: good (used) roller width (RB): 440 mm roller pitch: 125 mm variable drive type: SEW gear motor weight of conveyed material: up to 30 kg Accumulating mechanics: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g.: Frequency converter supports side guides Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-400 condition: very good (used) Conveying length in mm: 2625 Nominal / outside width in mm: 500 Roll width in mm: 440 Ro ...

Designed as a machine for smaller formats, the 19 200 Base is capable of producing 7500 packs per hour. It is suitable for filling different products. Preferably, aseptic products are filled in the machine, which are previously fed into the filling line via a UHT or a pastorizer for preservation. Subsequently, it is possible to equip the filling machine with different downstream equipment. You are welcome to contact us to find the right selection for your requirements. We are also happy to support you in the planning and implementation of the necessary conveyor belt systems to connect the individual machines as a line. All machines undergo extensive technical work before they are put back into operation, which we always carry out in our workshop. In the end, there are always tests to be fully verified. These tests guarantee the perfect condition of the machine for the customer. On reques ...

2005 STRIKO WESTOFEN MH I-2 3000/2000 Charging system Oven Technical data: See pictures Find more here - / Contact us at -

Designed as a machine for smaller formats, the 19 200 Base is capable of producing 7500 packs per hour. It is suitable for filling different products. Preferably, aseptic products are filled in the machine, which are previously fed into the filling line via a UHT or a pastorizer for preservation. Subsequently, it is possible to equip the filling machine with different downstream equipment. You are welcome to contact us to find the right selection for your requirements. We are also happy to support you in the planning and implementation of the necessary conveyor belt systems to connect the individual machines as a line. All machines undergo extensive technical work before they are put back into operation, which we always carry out in our workshop. In the end, there are always tests to be fully verified. These tests guarantee the perfect condition of the machine for the customer. On reques ...

General Features: - Machine Type: 4-axis vertical lathe. - Manufacturer: Inventhor - Model: Iridium 200 - Operation: Designed for series production with dual movable main spindles allowing workpiece change during production time. - Applications: Ideal for pre-formed chuck workpieces, suited for short machining times and medium to large batch sizes. - Two-Sided Machining: Supports machining with different cycle times for operations OP10 and OP20. - Only 492,000 machine cycles, Automation: - Options: Equipped with either a conventional automation solution or can be integrated with an industrial robot for enhanced flexibility. Technical Data (Overview): - Circulation Diameter: 200 mm (automated). - Travel Distances: X-axis – 220 mm; Z-axis – 280 mm. - Loading Time: Approximately 3.0 seconds, conducted in parallel with production time. - Workpiece Change: Around 2.0 seconds for chan ...

grinding diameter: 600 mm grinding length: 2000 mm centre height: 320 mm workpiece weight: 1200 kg workpiece weight in steadies max.: 5000 kg grinding wheel size: 760 x 304,8 x 75 mm grinding wheel turining speeds: 500 - 1400 U/min turning speed range - workpiece: 5 - 150 U/min main drive motor: 22 kW workpiece drive: 12 kW Control: Fanuc 0i Mate-MD total power requirement: 42 kW weight of the machine ca.: ca 10 t dimensions of the machine ca.: 11 x 2,9 x 1,8 m equipped with: - CNC control FANUC Series 0i Mate-MD - tailstock - 5 closed steady rests - 4 support blocks - Splash guard doors - CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 150 mm gear width: mm max. module: 4 min. module: control: Sinumerik 840 D table diameter: 140 mm maximum axial offset: 200 mm milling tool taper: ISO 40 diameter of hob: max. 130 mm cutter length max.: 220 mm milling spindle speeds (infinitely variable): 300 - 1200 U/min shifting: max. 170 mm milling head -swivable +/-: 45 ° feed speeds: 1 - 1500 mm/min rapid travel speed: 3000 m/min workpiece magazin: Stück max. workpiece diameter: im Magazin: 150 mm total power requirement: 50 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4,7 x 3,6 x 2,6 m Condition: ready for operation: Video(s) available on our website.: Electric 400 Volt: Used gear hobbing machine, Pfauter, completely overhauled in 2023 by the specialist company SerWeMa. There is another identical machine available, but the spindle needs to be overhauled. If you are interested, you ca ...

Five axis machining centre CME QUICK 200 CNC - 2000x1000x1300 mm, 18.000 rpm, CNC SELCA 4045PD, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 2100x850 mm, Longitudinal travel x axis: 2100 mm, Cross travel y axis: 1000 mm, Vertical travel z axis: 1300 mm, Cnc: SELCA 4045 PD, Spindle motor power: 26 Kw, Spindle speed: 18000 rpm, Spindle taper type: HSK 63, Automatic tools change nr.: 20, Approx net weight: 18.000 kg, Accessories: Continuos round table 800 mm, coolant thrugh spindle 15 bar, electronic handwheel SELCA SILBOX 2, chip conveyor

Bridge type Machining Centre NICOLAS CORREA EURO 2000 - 18.000 rpm - capacity 2000x1250x650 mm, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 2000x1000 mm, Longitudinal travel x axis: 2000 mm, Cross travel y axis: 1250 mm, Vertical travel z axis: 650 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 30.000 mm/1, Rapid feed x-y-z axes: 30.000 mm/1, Spindle taper type: HSK 63, Automatic tools change nr.: 40, Spindle speed: 0- 18.000 rpm, Spindle motor power: 20 Kw, Cnc: SELCA 4045, Approx net weight: 20.000 Kg, Accessories: through-spindle coolant, chip conveyor

Hydraulik shear OMAG CE204 - 2050 x 4-5 mm, Information about technical data are not binding., Machine available subject to prior sale., Cutting lenght: 2050 mm, Cutting thick: 4-5 mm, Throath depth: 200 mm, Backgauge travel: 600 mm, Main motor power: 4 Kw, Approx net weight: 3.100 Kg, Accessories: Manual back gauge

Hackeranlage hacker Rudnick Enners 500 200 motor 45kw 500mm 200mm vibrorynne detecktor metau scratch conveyor technology

Key data: 2500 V, 2711 , 6300

Engine; MTU204000L64 Year of Construction 2025 Operation hours; 0 (New) Electric power; max 2500kWe Construction form; 20 cylinders in V configuration Voltage; 6300 kV Apparent power; 2.711kVa Speed; 1.500 RPM Frequency; 50Hz Model; Containerized Fully equipped with heat coupling & CHP MTU, GAS GENERATOR, CONTAINERIZED, CHP ROLLS ROYCE

Packaging line for shrink bags The line consists of : Vacuum packaging machine MULTIVAC C 700 Chamber dimensions (LxBxH): 1060x440x200 mm Machine dimensions (LxBxH): 1270x850x1150 mm Seal bar length: 1 x 1060 mm Machine cycle: 15-40 sec. Voltage: 400 V-3-50 Hz Power: 7,0 kW ; 22 A HENKELMAN DIPTANK 200 A Automatic platform with conveyor belt Digital temperature control Stainless steel casing Maximum loading capacity: 30 kg Immersion depth: 200 mm Immersion time: 3-5 seconds (adjustable) Cycle time: 22 seconds Compressed air consumption 50 l/min 6 bar Automatically controlled water supply Water drain Automatic water level control Built-in scale protection Time switch to preheat water

CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 590 Turning length mm: 510 Max. turning diameter mm: ø: Ø356 Upper turret Tool holder: 12 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 15/11 Spindle bore mm: 73 Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp Tool measuring arm High pressure pump Workarea light 4th axis Interface for Bar feeder Rated power kVA Working time hours Under power: 7456 Spnidle: 5423 Basic machine dimensions / weight Length mm: 3495 Width mm: 2050 Height mm: 2230 Weight kg: 5800

6-axis robot with controller, an associated programming device and, on request, the bagging scale shown for sale. The operating hours are probably less than 100 hours. The system is being sold because of a product change. Previously, the robot filled powder into paper bags (20kg), sewed the bags shut and palletised them. Find more here - / Contact us at -

Granit marble ATELIERS MAITRE Length: 2000 mm Width: 1200 mm Thickness: 400 mm Height on feet: 910 mm Class 2 Weight: approx 2 T

Ref. №: 4018 Sausage line The line include: HP10 E type 161 Continuous vacuum filler for straight filling and portioning Machine features: All in one 250 l hopper Standard double screw Standard double screw housing Integrated CAN-bus control: Graphical display Double screw drive with 7.0 kw AC servo Infeed scroll drive with 4 kw ac motor with frequency inverter Nominal output, total: 14 kw ;21 A VEMAG lifting and tipping device for HPE with 250 l hopper To fit standard trolley, 200 l capacity VEMAG high-performance linking machine for identical lengths with casing magazine LPG 209: For linking and portioning all common types of casing in identical lengths With casing magazine for collagen, polyamide or cellulose casings For sausage calibers from 13 to 40 mm For shirred casing lengths up to 430 mm For sausage lengths from 20 mm to approx. 400 mm Nominal ...

Good day We offer you a used OCC sorting system consisting of a paper spike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper take-off belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, manufacturer Lubo Screening & Recycling Systems B.V. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes of the PaperSpike as well as pneumatic cylinders were replaced. All bearings and drive chains were replaced, and the engines and transmissions were checked. A viewing is possible by appointment. We assume no liability for the technical information or any errors. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH

Manufacturer KRAUSS MAFFEI Type KM 200-700 C1 M. Year 2005 • Dimensions(LxWxH) 5600x1900x2200 • Weight 11000 kg Injection molding machines are used for manufacturing parts from different plastics in a wide range of colors, shapes and sizes. Processing of thermosetting plastics involves transforming the initial material in the machine into a plastic state by heating it and injecting it under pressure into a closed shape (mold) and removing it from the mold after a cooling phase. Find more here - / Contact us at -

Description: Eagle Systems CFM 106-20K Eco-Eagle Foil Module Consisting of: 1. Bi-directional differential shaft (x2) 2. Automatic pneumatic connection 3. SS Dual hardened helical gears both shafts 4. Quick release rubber module spreader rollers 5. Lower in-feed roller assembly for proper foil path 6. Heavy duty linear thrust bearings 7. Precise air transducers 8. Air pressure control sensor 9. PID closed loop air system control 10. Eco-Power” Minimal power servo motor control 11. Closed loop sensors for foil speed control 12. Fail safe closed loop sensors for multi foil roll control 13. Foil position encoder 14. Fail safe wiring system 15. Solid state relays 16. Mode indication by lights 17. Fully automatic control 18. Fail safe press guarding 19. Full Module guarding 20. Foil shaft lifting beam 21. All electrical and pneumatic controls contained within the modu ...

: . : . : . Electric air purifier The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1999 WEBER LC 2000 DDP-600 Working width max. 600 mm Workpiece thickness max. 150 mm automatic measurement of the workpiece thickness Feed continuously adjustable 2 - 12 m/min. Aggregate equipment: 1) Contact roller unit with smooth steel roller Drive motor 15 KW, pole-changing for 2 grinding speeds 2) Rubber contact roller assembly with corrugated rubber roller Hardness 60 Shore drive motor 15 KW, pole-changing, this one The motor also drives the subsequent sanding shoe unit 3) Sanding shoe unit pneumatically controlled Machine complete with small parts return, designed as a transport curve, as a plate conveyor transport Machine weight approx. 1,800 kg Connection values: 400 V, 50 Hz, 3 Ph. Find more here - / Contact us at -

2016 ONLINK Technologies SIGMET-2000V High vacuum coating machine The system coats even the most complex 3D molded parts made of metal, glass or plastic with aluminum and achieves exact, precise quality and flexibility. Total machine operating hours: 700 hours. Characteristics: - Double door arrangement for high productivity - Precise drive system - Planetary drive for even coating - Vertical arrangement of the substrate holders - Modular and very flexible structure - Annealing pretreatment by alternating or direct current - Annealing pre-treatment by MF (40 kHz) - Recipe management and process visualization - Base coat - PECVD process - Top Coat (protective layer) - PECVD process - Highly effective and fast vacuum system - Remote maintenance Typical applications: - Automobile – inside and out - Cosmetics - Household and furniture - Glass and bottles - Decorative  ...

Mitutoyo QUICK VISION ACTIVE 202 Optical measuring machine (Vision Measuring Machine) from the manufacturer Mitutoyo Specifications (See pictures) High efficiency No constant supervision is required. The operator can carry out other tasks. Minimisation of error sources Automatic edge detection The automatic edge detection function enables high reproducibility of measurements, regardless of the reproducibility of measurements. Image autofocus The image autofocus function enables reliable height measurements at high speed. Continuous measurement of multiple workpieces Grinding function With this function, a large number of workpieces positioned on the large number of workpieces positioned on the device are on the device in a single operation. Automatic measurement can be started after be started after rough positioning Pattern search The pattern search function automat ...

Machine Type: Center Grinding Machine Manufacturer: Henninger Model: ZS 200 Year: Not specified - Max Workpiece Length: up to 2000 mm - Workpiece Diameter: 285 - 325 mm - Center Diameter: 2 - 110 mm - Bore Taper: 50 - 120 mm - Center Height: 165 mm - Wheel Diameter: 10 - 60 mm - Grinding Wheel Speed: 9150 - 18300 RPM - Power: 0.4 kW - Weight: 0.5 tons Equipped with: - Pneumatic centering device

200 litre stainless steel tank Content: 200 litres Technical specifications : single-walled container, open at the top

Offer 25020 Specifications: - Compressive force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Diarrhea hole in the table approx. 320 x 220 mm - Pushrod area 940 x 400 mm - Plunger adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg

Specifications: Maximum cutting width: 2050 mm Maximum cutting capacity steel: 0.5 - 4.0 mm Adjustable rip fence: 1050 mm Retraction function Cutting gap adjustment Working height: 1030 mm Dimensions (length x width x height): approx. 2500 x 1900 x 1750 mm Weight: approx. 3,6 tons

Sling chains 4 - strand J.D.T. Load capacity 60 tons 4 - Strand with rocker Effective length 2,000 mm Nominal chain thickness 32 mm Coupling links with shackle 35to Crack testing according to BGR 500 in 2012 new Test number 29186 Weight approx. 318 kg Chain audit in 2012 - as good as new - unused -

used original kettle for Kemper SP 200 AL spiral mixer, for 200 kg flour, very good condition, hardly used, with stainless steel handle, stainless steel kettle, factory no. 6723885

200 litre stainless steel tank Manufacturer : Ahrens & Bode Pressure vessel Content: 200 litres Technical specifications : cylindrical stainless steel container on feet, single-walled Conical spout Operating pressure up to 5 bar Metrics: ca. Diameter: 360 mm, diameter lid 500 mm, cone 400 mm Cylindrical height: 1,840 mm Enema: 3x DN 50 Discharge: DN 65 Documents: Nameplate

Key data: 450 mm, 63 , 25

Screw diameter: 25 mm Displacement: 69 cm³ Injection weight in polystyrene: 63 g/hp Injection pressure: 2,400 bar Clamping force: 45 t tie-barless Tool installation height min.: 175 mm Opening distance: 355 mm CONTROL: CC200 Screen text: german / german Instruction manual: german / german Sprue picker er/usp Pump drive power: 11 kW Total connected load: 17.8 kW Total weight: 3,300 kg Dimensions L x W x H: 3.3 x 1.2 x 2.0 m m m Payment terms: 100% before taking over the machine, net only

Stock number: 3975 PROCESSING Manufacturer: CHEVALIER, Type: 2040 VMC Machine NO.: MC925B02, Year of manufacture: 2003 Specifications: Table size 1200 x 450 mm Longitudinal movement (X) 1020 mm Transverse movement (Y) 500 mm Vertical movement (Z) 500 mm Spindle Taper 40 ISO Stepless spindle speeds 8000 rpm Spindle motor 7.5 Kw Total power 15 KVA Tool changer 20 places Control Fanuc 0M Fabr. Operating hours spindle 4032 hours Length: 2350 mm, Height: 2650 mm, Width: 2750 mm, Weight: 5800 kg

Bous Cleaning system degreasing - The Bous Trowamat RL 200 CP V is a compact and efficient cleaning system designed for cleaning and degreasing smaller concrete tools and equipment, such as hand trowels, floats, and other handheld construction tools. It is part of Bous GmbH´s line of cleaning machines, which are widely used in the construction industry for maintaining and prolonging the life of equipment. Find more here - / Contact us at -

Ultrasonic Banderolier ATS US 2000 AST-MDM; cleaned and tested; Frame size 900x750mm; Belt width 30mm; suitable for paper (also suitable for TruePaper paper) or foil; Meter reading 795,000 thousand; Compressed air required. Ultrasonic banding machine ATS US 2000 AST-MDM; cleaned and checked;  frame size 900x750mm; band width 30mm; used for paper (also for TruePaper material) or foil; counter 795,000; pressurized air needed.

Key data: 600 KW

After E70 about 4000h only walked. If you are interested, please contact us via WhatsApp at 004915229184328.

Specifications: Clamping plate dimensions: 2050 x 1000 mm Panel thickness: 170 mm T-slots: 15 / 25 mm Dimensions (length x width x height): approx. 2050 x 1000 x 170 mm The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

The scope of delivery includes: 01x Wooden beams, used Species: Spruce / Fir Cross-section: approx. 200 x 100mm Total length: approx. 2,800 mm Weight | Pcs.: approx. 25.67 kg The price shown corresponds to the pick-up price for a wooden beam in the specified dimensions. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Digital Turning diameter 120 mm Turning length 700 mm Spindle speed 2000 min-1 Tailstock

2x Diosna SP 200 AD - mit 5 kessel - mit hebekipper Alle Maschine nach gülüngel überholung. Moglich verkauf separate maschinen. Moglich austauch mit andere alte maschine in abrechnung. Meh info auf frage mail oder WhatsApp

New Leveling Milling Head for Muller Martini Perfect Binder

Used liquid filling (also alcohol) line made by Groninger. Year of manufactury 1997. Capacity 60 bot/minute. Effective capacity 3300 packages per hour. The line was stopped in 2018, it is fully operational and technically complete. The oline ony requires individual machines overview. Technical documentation and exploatation documentation available in English and maintanance documentation available in Polish. The line consists of: 1. Filler Groninger model KFVG 201 filler 2. Blower model AAVK300 3. Sorting system ZSB 600 4. Lifter DE100 5. Rotary table DTE600 6. Control Panel Grnininger

DEUTZ-MWM TCG 2032 CYLINDER HEAD DEUTZ-MWM TCG 632 CYLINDER HEAD

MK Belt conveyor Förderband 11313-700-690 RA2354 Manufacturer: MK Type: GUF-P 2041 AF/11313/700 Year of manufacture: 2022 Condition: as good as new Motor: fully functional conveyor length (FL): 11313 mm nominal / external width (NB): 700 mm belt width (GB): 690 mm overall height (BH): 100 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 1,5 380V Conveyor speed: Frequency converter for stepless speed control Drive: head drive Optional: supports Side guides Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2022 condition: new Conveying length in mm: 11313 Nominal / outside width in mm: 700 Belt width in mm: 690 Driven: YES Engine type: SEW Eurodrive KW: 1,5/S1 Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, professional advice, simply get in touch with ...