mak 20 used for sale

cutting diameter: 1110 mm saw band length: 10500 x 67 x 1,6 mm cutting width: 1110 mm : 1110 x 1110 mm table height: 545 mm capacity 90 degrees: round: 1110 mm capacity 90 degrees: square: 1110 x 1110 mm cutting speed: 20 - 100 m/min : 1020 mm : 675 mm : 675 x 675 mm Capacity 45° rectangular: 675 x 1020 mm total power requirement: 10 kW weight of the machine ca.: 5,86 t dimensions of the machine ca.: 4,5 x 1,7 x 2,7 m Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies coolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cutting proces and the saw arm is lifted hydraulically. The data for this ad wa ...

cutting diameter: 560 mm saw band length: 6000 mm cutting width: 750 mm table height: 590 mm : 560 mm Capacity 90° rectangular: 410 x 560 mm : 410 mm : 410 mm Capacity 45° rectangular: 410 x 560 mm speeds steplessly adjustable: 20 - 100 m/min dimensions of saw-band: 6000 x 41 x 1,3 mm total power requirement: 5,22 kW weight of the machine ca.: 2,045 t dimensions of the machine ca.: 3,4 x 1,0 x 2,05 m Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies oolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cutting proces and the saw arm is lifted hydraulically. ?inverter ?hydromechanic blade tension ?swa ...

cutting diameter: 230 mm saw band length: 2730 x 27 x 0,9 mm cutting width: 130 mm speed: 35 - 70 m/min Capacity 90° rectangular: 320 x 130 mm : 230 mm : 180 mm Capacity 45° rectangular: 230 x 100 mm : 150 x 150 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: flat: 120 x 100 mm capacity 60 degrees: square: 100 x 100 mm table height: 760 mm total power requirement: 1,8 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 1,35 x 0,7 x 1,3 m On semi-automatic models the saw arm is lifted up automatically after the sawing cycle has finished. inverter hydraulic clamping hydraulic saw blade tension adjustment automatic stop ?material transport system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 460 mm saw band length: 5200 x 41 x 1,3 mm cutting width: 470 mm : 460 mm Capacity 90° rectangular: 470 x 460 mm cutting speed: 20 - 100 m/min total power requirement: 5,2 kW weight of the machine ca.: 1,66 t dimensions of the machine ca.: 3,1 x 3,1 x 1,8 m Fully automatic band saw for cutting solid material, tubes and profiles of steel, cast-iron, light and non ferrous materials, at 90°. Entirely made of steel. The rear jaw of the hydraulic vice has a number of hardened rollers that are turned by an electric motor. The front jaw consist of a number of free running rollers. Once the work piece is clamped between the rollers no further clamping is needed. The material is fed through the vice to the material stop which contains a micro-switch controlling the feed motor. A counter controls the number of cuts. Should the blade brake the machines stop automatically. The ma ...

cutting diameter: 230 mm saw band length: 2730 x 27 x 0,9 mm cutting width: 240 mm : 230 x 230 mm capacity 90 degrees: flat: 240 x 230 mm speeds steplessly adjustable: 35 - 70 m/min table height: 590 mm total power requirement: 2,0 kW weight of the machine ca.: 590 kg dimensions of the machine ca.: 1,7 x 0,8 x 1,16 The HU 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large workshops and small production lines. separate control panel sawing pressure hydraulically adjustable with cooling system easily moveable with stop gear wheel driven left – right mitre sawing The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 460 mm saw band length: 5200 mm cutting width: 650 mm : 460 mm Capacity 90° rectangular: 650 x 460 mm : 380 mm : 380 x 380 mm Capacity 45° rectangular: 380 x 460 mm speeds steplessly adjustable: 20 - 100 m/min dimensions of saw-band: 5200 x 41 x 1,3 mm table height: 590 mm total power requirement: 4,67 kW weight of the machine ca.: 1,52 t dimensions of the machine ca.: 3100 x 1000 x 1800 m Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies oolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cutting proces and the saw arm is lifted hydraulically. inverter hydromechanic blade tension ...

cutting diameter: 360 mm saw band length: 5000 mm cutting width: 610 mm speed: 20 -100 m/min main drive: 3 kW hydraulic pump: 0,55 kW coolant pump: 0,12 kW dimensions of saw-band: 5000 x 34 x 1,1 mm : 360 mm : 360 x 360 mm Capacity 90° rectangular: 610 x 360 mm : 360 x 360 mm : 360 x 360 mm Capacity 45° rectangular: 490 x 360 mm : 360 mm : 360 mm : 610 x 360 mm capacity 60 degrees: round: 3,67 mm capacity 60 degrees: square: 360 x 360 mm capacity 60 degrees: flat: 360 x 360 mm band speed: stufenlos 20 - 100 m/min total power requirement: 3,67 kW weight of the machine ca.: 1,47 t dimensions of the machine ca.: 2,75 x 1,21 x 1,87 m This twin-pillar horizontal bandsaws have been designed to provide a low cost, compact and rigid machine.The bow is constructed in heavy gauge steel. It is mounted at two chromed and grinded pillars offering a strong rigid sawframe. This design provides a high ...

cutting diameter: 810 mm saw band length: 8400 mm cutting width: 910 mm capacity 90 degrees: square: 770 x 770 mm : 910 x 750 mm : 600 mm : 600 mm Capacity 45° rectangular: 760 x 600 mm capacity 60 degrees: round: 360 mm capacity 60 degrees: square: 360 mm capacity 60 degrees: flat: 750 x 360 mm : 760 mm : 740 mm : 750 x 740 mm speeds steplessly adjustable: 20 - 100 m/min table height: 725 mm dimensions of saw-band: 8400 x 41 x 1,3 mm total power requirement: 5,62 kW weight of the machine ca.: 4,05 t dimensions of the machine ca.: 4,02 x 1,6 x 2,45 m Product Description PRODUCT DESCRIPTION Two way powered mitre with NC angle setting Features ?Powered mitre setting with NC control ?Mitre cuts to +/-60 deg with +/-0.1 deg tolerance ?5-deg inclined blade for optimum cutting performance ?Hydraulic blade tensioning ?Blade deviation control with auto shut off ?Cutting feed & pressure regulati ...

cutting diameter: 330 mm saw band length: 4160 x 34 x 1,1 mm cutting width: 500 mm : 320 mm Capacity 90° rectangular: 500 x 320 mm speeds steplessly adjustable: 20 - 100 m/min table height: 640 mm total power requirement: 3,0 kW weight of the machine ca.: 860 kg dimensions of the machine ca.: 2,10 x 0,85 x 1,30 m On semi-automatic models the saw arm is lifted up automatically after the sawing cycle has finished. inverter hydraulic clamping hydraulic saw blade tension adjustment automatic stop ?material transport system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 3660 x 27 x 0,9 mm cutting width: 300 mm : 300 x 300 mm Capacity 90° rectangular: 320 x 300 mm speeds steplessly adjustable: 20 - 100 m/min work height max.: 640 mm total power requirement: 2,9 kW weight of the machine ca.: 765 kg dimensions of the machine ca.: 1,9 x 0,85 x 1,3 m after the sawing cycle has finished. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 3660 x 27 x 0,9 mm cutting width: 350 mm Capacity 90° rectangular: 350 x 320 mm : 320 mm : 260 mm : 180 mm : 250 x 180 mm : 160 mm : 150 x 150 mm speeds steplessly adjustable: 20 - 100 m/min : 180 x 180 mm work height max.: 740 mm Control: total power requirement: 3,42 kW weight of the machine ca.: 2,31 t dimensions of the machine ca.: 2100 x 2100 x 1810 m On semi-automatic models the saw arm is lifted up automatically after the sawing cycle has finished. inverter hydraulic clamping hydraulic saw blade tension adjustment automatic stop ?material transport system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

speed: 35 - 70 m/min cutting diameter: 230 mm saw band length: 2720 x 27 x 0,9 mm cutting width: 130 mm cutting capacity - flat: 90° / 320 x 130 mm cutting capacity - round: 90° / 230 mm cutting capacity - square: 90° / 230 x 230 mm cutting capacity - flat: 45° / R 220x60 /L 230x140 mm cutting capacity - round: 45° / R 180 / L 220 mm cutting capacity - square: 45° / R 150 / L 190 mm cutting capacity - flat: 60° / 120 x 105 mm cutting capacity - round: 60° /120 mm cutting capacity - square: 60° / 105 mm total power requirement: 1,0 - 1,5 kW weight of the machine ca.: 390 kg dimensions of the machine ca.: 1,35 x 0,9 x 1,3 m The HU 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large wor ...

cutting diameter: 380 mm saw band length: 4800 x 34 x 1,1 mm cutting width: 430 mm : 380 mm Capacity 90° rectangular: 430 x 380 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 4,2 kW weight of the machine ca.: 1,34 t dimensions of the machine ca.: 2,9 x 0,95 x 1,66 m Fully automatic band saw for cutting solid material, tubes and profiles of steel, cast-iron, light and non ferrous materials, at 90°. Entirely made of steel. The rear jaw of the hydraulic vice has a number of hardened rollers that are turned by an electric motor. The front jaw consist of a number of free running rollers. Once the work piece is clamped between the rollers no further clamping is needed. The material is fed through the vice to the material stop which contains a micro-switch controlling the feed motor. A counter controls the number of cuts. Should the blade brake the machines stop auto ...

cutting diameter: 320 mm saw band length: 3660 x 27 x 0,9 mm cutting width: 420 mm : 320 x 320 mm Capacity 90° rectangular: 420 x 200 mm : 280 mm : 260 x 260 mm Capacity 45° rectangular: 280 x 200 mm cutting speed: 20 - 100 m/min work height max.: 640 mm total power requirement: kW weight of the machine ca.: 1,62 t dimensions of the machine ca.: 1,8 x 0,82 x 1,19 m This bandsaw have been designed to give a low cost compact and rugged machines.Constructed in heavy gauge steel, it offers a strong rigid sawframe, providing a high degree of accurancy when cutting. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. These models can cope with most types of material.Blade guides with rollers and carbide pads provide precise support for the blade. Thermal overload and no-volt release are standar ...

cutting diameter: 350 mm saw band length: 4160 mm cutting width: 400 mm : 350 mm : 350 x 350 mm Capacity 90° rectangular: 400 x 350 mm speed: 20 -100 m/min main drive: 2,2 kW hydraulic pump: 0,37 kW coolant pump: 0,12 kW dimensions of saw-band: 4160 x 34 x 1,1 mm work height max.: 860 mm total power requirement: 2,9 kW weight of the machine ca.: 1030 kg dimensions of the machine ca.: 2,23 x 0,88 x 1,89 m Description: • Fully automatic miter band saw for sawing thick-walled Profiles and solid materials • Motorized roll feed of the material with electrical contact stop • Delta touch screen controls • Miter cutting, up to 45 ° • 1 program with 10 steps • Length accuracy 0.5 mm The feed length of the material is manually adjustable via an Microswitches selected that • Robustly constructed monoblock saw frame with hydraulic vertical movement and linear guide • Rapid advanc ...

cutting diameter: 650 mm saw band length: 8400 mm cutting width: 1000 mm capacity 90 degrees: square: 600 x 600 mm : 1000 x 600 mm capacity 45 degrees: round: 650 mm : 600 x 600 mm : 660 x 600 mm capacity 60 degrees: round: 440 mm capacity 60 degrees: square: 440 x 440 mm : 440 x 600 mm : 650 mm : 600 mm : 840 x 600 mm table height: 880 mm speeds steplessly adjustable: 20 - 100 m/min dimensions of saw-band: 8400 x 54 x 1,6 mm total power requirement: 12 kW weight of the machine ca.: 6,25 t dimensions of the machine ca.: 4,75 x 2,27 x 2,63 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 270 mm saw band length: 3160 x 27 x 0,9 mm cutting width: 350 mm work height max.: 910 mm speed: 35 - 70 m/min : 270 mm Capacity 90° rectangular: 350 x 220 mm : 210 mm Capacity 45° rectangular: 270 x 210 mm : 180 mm capacity 60 degrees: round: 150 R mm capacity 60 degrees: square: 100 R mm total power requirement: 1,5 kW weight of the machine ca.: 465 kg dimensions of the machine ca.: 1750 x 770 x 1460 mm The HU 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large workshops and small production lines. separate control panel sawing pressure hydraulically adjustable with cooling system easily moveable with stop gear wheel driven left – right mitre sawing The data for this ...

cutting diameter: 540 mm saw band length: 6000 mm cutting width: 750 mm table height: 695 mm cutting speed: 20 - 100 m/min : 540 mm : 540 x 540 mm Capacity 90° rectangular: 750 x 540 mm : 540 mm : 540 mm : 600 x 540 mm : 510 mm : 450 mm Capacity 45° rectangular: 450 x 540 mm capacity 60 degrees: round: 270 mm capacity 60 degrees: square: 250 mm capacity 60 degrees: flat: 250 x 540 mm total power requirement: 4 kW weight of the machine ca.: 2,45 t dimensions of the machine ca.: 3,0 x 1,3 x 2,13 m Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies oolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cu ...

cutting diameter: 560 mm saw band length: 6000 x 41 x 1,3 mm cutting width: 570 mm : 560 x 560 mm Capacity 90° rectangular: 570 x 560 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 6,0 kW weight of the machine ca.: 2,24 t dimensions of the machine ca.: 3,5 x 1,05 x 2,05 m Fully automatic band saw for cutting solid material, tubes and profiles of steel, cast-iron, light and non ferrous materials, at 90°. Entirely made of steel. The rear jaw of the hydraulic vice has a number of hardened rollers that are turned by an electric motor. The front jaw consist of a number of free running rollers. Once the work piece is clamped between the rollers no further clamping is needed. The material is fed through the vice to the material stop which contains a micro-switch controlling the feed motor. A counter controls the number of cuts. Should the blade brake the machines sto ...

Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, hand drill -Nominal consumption: 330 watts -Max. Drill: 10 mm -Connection: 230 volts -Weight: 2 kg

cutting diameter: 230 mm saw band length: 2720 x 27 x 0,9 mm cutting width: 130 mm cutting capacity - flat: 90° / 320 x 130 mm cutting capacity - round: 90° / 230 mm cutting capacity - square: 90° / 230 x 230 mm cutting capacity - flat: 45° / R 220x60 /L 230x140 mm cutting capacity - round: 45° / R 180 / L 220 mm cutting capacity - square: 45° / R 150 / L 190 mm cutting capacity - flat: 60° / 120 x 105 mm cutting capacity - round: 60° /120 mm cutting capacity - square: 60° / 105 mm speed: 35 - 70 m/min total power requirement: 1,0 - 1,5 kW weight of the machine ca.: 410 t dimensions of the machine ca.: 1,35 x 0,9 x 1,3 m The BMSY 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large wo ...

cutting diameter: 320 mm saw band length: 3660 x 27 x 0,9 mm cutting width: 350 mm cutting capacity - round: 90° / 320 mm cutting capacity - flat: 90° / 350 x 320 mm cutting capacity - square: 90° /320 mm speed: 20 - 100 m/min : 260 mm capacity 45 degrees: flat: 250 x 180 mm : 180 mm : 160 mm : 150 x 150 mm : 150 mm total power requirement: 1,5 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1900 x 1200 x 1350 m 280G,320G and 320GL are durable and stably laid out for universal separetion from full materials,pipes and profiles.A fast and precise mitre adjustment is characteristic within the range of 90 deg to 30 deg.The sawing property is situated in-line and becomes manuel strained in the angle of 90 deg. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. These models ...

cutting diameter: 440 mm saw band length: 5200 mm cutting width: 695 mm : 440 mm Capacity 90° rectangular: 610 x 440 mm : 4409 x 440 mm capacity 45 degrees: round: 410 mm : 440 x 440 mm Capacity 45° rectangular: 410 x 440 mm : 440 mm : 440 x 440 mm : 500 x 440 mm capacity 60 degrees: round: 320 mm capacity 60 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 250 x 440 mm table height: mm band speed: stufenlos 20-100 m/min total power requirement: 3,62 kW weight of the machine ca.: 1,54 t dimensions of the machine ca.: 2,8 x 1,21 x 1,87 m Horizontal band saw with linear guideways, ideal for mitre cuts between 90° and +30°. Auto height adjustment sensors ensure that the bow can approach the material at high speed. The hydraulic cutting control allows the bow rise up again after a cut has been made. This process is controlled by digital counter on the control panel. The bow angle ...

cutting diameter: 270 mm saw band length: 3160 x 27 x 0,9 mm cutting width: 350 mm cutting capacity - flat: 90° / 350 x 220 mm cutting capacity - round: 90° / 270 mm cutting capacity - square: 90° / 260 x 260 mm cutting capacity - flat: 45°/ R 180x180/ L 240x160 mm cutting capacity - round: 45° / R 210 / L 240 mm cutting capacity - square: 45° / R 180 / L 240 mm cutting capacity - flat: 60° / 150 x 150 mm cutting capacity - round: 60° /160 mm cutting capacity - square: 60° / 150 mm speed: 34 x 68 U/min total power requirement: 1,5 kW weight of the machine ca.: 430 kg dimensions of the machine ca.: 31 m The HU 230 DG is a popular sawing machine and is heavily sold, due to its favourable price-quality relation. With adjustable sawing pressure, coolant pump with reservoir and electrical-mechanical saw blade tension adjustment, this machine is ideal for large workshops and small pro ...

cutting diameter: 270 mm saw band length: 3160 x 27 x 0,9 mm cutting width: 350 mm Capacity 90° rectangular: 350 x 230 mm : 210 mm Capacity 45° rectangular: 270 x 200 mm : 170 x 170 mm capacity 60 degrees: round: 150 mm capacity 60 degrees: flat: 150 x 100 mm capacity 60 degrees: square: 100 x 100 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 2,0 kW weight of the machine ca.: 476 kg dimensions of the machine ca.: 1,73 x 0,77 x 1,46 m Machine description : • semi-automatic double miter for cutting profiles and Solid material in steel and non-ferrous material and excellent price-performance ratio • robust constructed monoblock saw frame • manually swiveling saw frame with hydraulic clamping for optimal Miter (not BMSY 270 DGH ) • miter on mobile control panel digitally readable (not BMSY 270 DGH ) • Hydraulic clamping of the horizontal vise • auto ...

CNC - Control Makino Travel x/y/z 370 mm / 270 mm / 220 mm workpiece dimensions L/W/H 790 mm / 670 mm / 220 mm Wire diameter range 0.1 mm – 0.25 mm workpiece weight 600 kg cone at 100 mm height +/- 15° Mitsubishi - Axle Drives

cutting diameter: 320 mm saw band length: 4160 mm cutting width: 610 mm : 320 x 320 mm Capacity 90° rectangular: 450 x 320 mm dimensions of saw-band: 4160 x 34 x 1,1 mm : 320 mm : 320 x 320 mm Capacity 45° rectangular: 280 x 200 mm : 320 mm : 320 mm : 420 x 320 mm speeds steplessly adjustable: 20 - 100 m/min table height: 860 mm total power requirement: 2,69 kW weight of the machine ca.: 1,03 t dimensions of the machine ca.: 2,23 x 1,15 x 2,14 m DG series horizontal bandsawing machines are ideal models for angle cutting of materials with varying number of cuts.It is possible to cut at variable angles between +45° and -60° by giving angle to the upper body of the machine.That machine makes the cutting hydraulically and automatically going up to the height after the cutting.The material is fed manually to the lenght stop and the cut is repeated. Standard Features: Saw Blade 34 Inverter ...

cutting diameter: 330 mm saw band length: 4160 x 34 x 1,1 mm cutting width: 610 mm : 330 mm : 330 mm Capacity 90° rectangular: 610x 310 mm : 320 mm : 320 x 320 mm capacity 45 degrees: flat: 460 x 180 mm speed: 20 - 100 m/min total power requirement: 2,69 kW weight of the machine ca.: 773 t dimensions of the machine ca.: 2,1 x 0,85 x 1,3 m Our semi automatic horizontal bandsaw machine is suitable to cut full materials as pipe, steel cating, steel etc. By turning the vice jaws 0-45 degree cut can be processed. On semi automatic models, after finishing the cut, sawframe is lifted hydraulically up to the adjusted level. After finishing the cut, sawframe is lifted hydraulically up to the adjusted level. Metal sawblade and material roller table are supplied as standart. Standard Features: Blade Brash Coolant Pump Control Panel Hydromechnic Blade Tension Inverter Heavy Duty Gearbox Height Adju ...

cutting diameter: 440 mm saw band length: 5200 x 41 x 1,3 mm cutting width: 640 mm : 440 x 440 mm Capacity 90° rectangular: 640 x 440 mm capacity 45 degrees: round: 440 mm : 400 x 400 mm Capacity 45° rectangular: 400 x 440 mm : 440 mm : 440 x 440 mm : 510 x 440 mm capacity 60 degrees: round: 250 mm capacity 60 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 250 x 440 mm table height: 850 mm cutting speed: 20 - 100 m/min dimensions of saw-blade: 3,1 x 1,2 x 1,91 m total power requirement: 4,67 kW weight of the machine ca.: 1,78 t dimensions of the machine ca.: 2,85 x 1,3 x 1,8 m Product Description Capacity of the machine is 440/640 and projected for fast cuttings straight or with angle . Sensetivity of the machine lets cutting with percentage angles. BMSY 440CDGH has automatic control system and open to future developments. Rollers on the table are designed for easy movement o ...

X : 1800 mm Y : 1000 mm Z : 800 mm Number of working hours : 2000 Tool measuring probe Chip conveyor

X : 550 mm Y : 550 mm Z : 550 mm Fanuc control unit Table size : 400 mm x 400 mm Machine is in working condition

X : 650 mm Y : 550 mm Z : 450 mm 20.000 rpm 1500 liters double head compressor Tool cabinet and hool holders come with machine

Makino SP43 EDM Wire Cutting Machine Machine is in very good condition Double generator X : 450 mm Y : 300 mm Z : 320 mm

Machine dimensions: 2900 x 1200 x 2000 mm Press dimensions: 2000 x 500 mm Press thickness: 20 – 350 mm Electric power: 14Kw/h, 40A Voltage frequency: 400V / 50Hz / 3P + N + PE Pressing power: 3200kg Production capacity: 1000 – 3000 m² per day Weight: 1000kg Mold weight: 100kg Emergency stop button: Yes

T-shirt bag making machine HEMINGSTONE HM-800ST2 Two lines with hot knife and side gusseting device Can run also with two separate rolls already with side gussets from the extruder Maximum bag width 2 x 330 mm Maximum bag length 700 mm. Maximum film width 1100 mm Maximum production speed 200 cycles/min.

Bag making machine Garbage bag roller with tape on roll Coemter (Spain) Bag width 400-650mm. Up to 8 rolls/min. Speed ​​up to 60m/min or up to 60m/min. Weld width 1000mm

Yoghurt Filling and Capping Machines, In our machine, where you can choose two options, full automatic and manual, the cups are automatically dropped into the molds at the first station. Then, it is filled in by adjusting the weight in the setting weight field, it automatically puts foil on it, the foil is being sealed at top of it.

Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Eeep90t Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg

Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg

Recon Part Number: 2.3120-AA Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

RECON Catalogue Number: 4.01.102-04 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

RECON Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

RECON ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

cutting diameter: 360 mm saw band length: 4800 mm cutting width: 510 mm : 360 x 360 mm Capacity 90° rectangular: 510 x 360 mm : 360 mm : 360 x 360 mm Capacity 45° rectangular: 390 x 360 mm : 360 mm : 360 x 360 mm : 510 x 360 mm capacity 60 degrees: round: 200 mm capacity 60 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 200 x 360 mm speed: 20 -100 stufenlos m/min main drive: 3,4 kW dimensions of saw-band: 4800 x 34 x 1,1 mm weight of the machine ca.: 1,45 t dimensions of the machine ca.: 2,65 x 1,2 x 1,87 m Machine description : • semi-automatic double miter for cutting profiles and Solid material in steel and non-ferrous material and excellentprice-performance ratio • robust constructed monoblock saw frame • manually swiveling saw frame with hydraulic clamping for optimal Miter (not BMSY 270 DGH ) • miter on mobile control panel digitally readable (no ...

Piston M20 used, overhauled. We have more pistons in stock. Feel free to send inquiry.

: gebraucht : 1998 : 6068 : Türkei : 980 € : 1 : 350x32x2 mm : 170 mm : 145 mm : 200x120 mm : rund 110 mm, quadrat 120 : 0.75 kW : 1100 mm : 600 mm : 810 mm : 250 kg hyd. hack saw material supporting jack didn&apos,t according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.