mak 20 used for sale

Simatic panel, operator panel, machine control, interface panel, operating unit, control panel, keyboard, control panel teach pendant -Manufacturer: Xycom, Operator Panel from OMSO CD Printing Machine -Type: 2005 -Dimensions: 420/280/H315 mm -Weight: 6.9 kg

Centrifugal pump, water pump, block pump, volute casing pump -Manufacturer: Ebara, centrifugal pump type CDXHM/A 200/20 -Flow rate: 80-250 l/min -Motor power: 1.5 kW -Speed: 2850 rpm -Pipe connection: see photos -Dimensions: 445/210/H240 mm -Weight: 15.7 kg

Pneumatic cylinders, air cylinders, standard cylinders, compressed air cylinders -Manufacturer: SMC, pneumatic cylinder double version each open on one side -Type: C95SDB 80-200 -Piston rod: Ø 25 mm -Stroke: 200 mm each -Pressure: max. 10 bar -Dimensions: 653/195/H130 mm -Total weight: 13.9 kg

Siemens Control 828 D Circulation over bed 560mm Circulation via cross slide 390 Circulation via recess 810 mm Center width 3000 mm Headstock Borungh D1-8 Spindle Nose Bushing MK7xMK5 Spindle speed 3 steps, max 2500 Travel Quill 200 mm Diameter quill 75 mm Bed width 345 mm Overall length 5170 mm, width 2100 mm, height 2230 mm Net weight 4000 kg Accessories 2 x chip conveyor, glue bar lathe chuck, turret, quick-change holder, El. Handwheels. 3 x steady rests, coolant system, manuals

Interface, data acquisition device, test device, telemetry system, probe interface -Manufacturer: Renishaw, Probe Interface from coordinate measuring machine Stiefelmayer C 100 413514 -Type: PI 200 -Dimensions: 185/140/H90 mm -Weight: 1.5 kg

Inv. Num. : 7796 Type: HSA 200 T Producer: Hidroliksan Created: 2022 Parameters: Operating hours: 1600 h Compressive force: 200 t Maximum stroke: 450 mm Top table length: 1600 mm Top table width: 1400 mm Speed (high): 250 mm/s Speed (down): 160 mm/s Working speed: 5-18 mm/s Machine height: 5000 mm Machine length: 3650 mm Machine width: 3400 mm Machine weight: 18,000 kg

Crane block, crane hook, load hook, single hook, bottom block -Crane hook: Crane hook load capacity 2 t -Rope groove: Ø 10 to 14 mm -Dimensions: 450/180/90 mm -Own weight: 8.5 kg

Heavy-duty castors, heavy-duty wheels, tires, tires with rims, heavy-duty tires, forklift tires -Heavy-duty castors: 4 pieces, from electric forklift -Tires: Ø 200 x 80 mm -Hub: Ø 65 x 45 mm / Dimensions see photos -Shipping/Price: complete -Dimensions each: Ø 200 x 170 mm -Weight: 10.5 kg/piece

Simatic Panel, Operator Panel, Machine Control, Interface Panel, Control Unit, Operating Panel, Keyboard, Control Panel Teachpendant -Manufacturer: B&R, control panel Operator Panel with signal column -Type: 4PPC70.0702-20B -Signal tower: Banner TL50HGWRQ -Transport dimensions: 1000/420/H180 mm -Weight: 13 kg

MWM TCG 2020 V12 Natural Gas Generating Set. Capacity: 1,235 kW Fuel: Natural Gas Year: 2011 Hours: 29,000 Voltage: 400 V Frequency: 50 Hz Scope of supply: Engine, Alternator (Marelli), Engine Panel, Control Panel, Gasline, Heat Exchanger. Photos are for illustration purposes only. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

faceplate diameter: 1250 mm turning diameter over slide rest: 2040 mm turning length: mm total power requirement: 55 kW weight of the machine ca.: 12 t dimensions of the machine ca.: m Brand Zerbst Machine no D982 Type DP 1 - 2.040 Ø Digital readout Maximum turning diameter 2.040 mm ø Passage 98 mm ø 4-Jaw Chuck 1.250 mm ø Speed 4,5 - 224 RPM Separate chisel support Engine power 55 kW Excluding slot table Quick-change holder Machine weight 12.000 kg Dimensions: Head: 2.500 x 1.800 x 1.700 mm support: 2.200 x 1.800 x 2.000 mm Electrical panel: 2.200 x 600 x 2.200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: surface plate with adjustable feet -Length: 2000 mm -Width: 1515 mm -Plate thickness: 130 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 2000/1515/H430 mm -Weight: 3150 kg

Clamping plate, marking-out, welding table, welding table, straightening plate, marking-out plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1515 mm -Table height: 800 mm -Plate thickness: 130 mm -Transport dimensions: 2000/1515/H800 mm -Weight: 3250 kg

Key data: 800 KW

Module 2 TCG 2016 V 16 C - 800 kW - 43,636 operating hours -Natural gas - Engine number: 2211009 - Year of construction: 2013 - Complete TEM control system with auxiliary unit control - RMG Gas Line – Natural Gas All service work was carried out by MWM service partners according to the manufacturer's specifications / maintenance plan. Sale due to site conversion and plant renewal. More pictures, information and offers on request. Viewing possible at any time by arrangement. Location: 49811 Lingen / Ems Subject to prior sale

PLC controller, central assembly, RAM, CPU, central processing unit, central device Manufacturer: Siemens, Simatic central assembly -Type: ET 200SP F-CPU 6ES7512-1SK01-0AB0 -Dimensions: 100/80/H120 mm -Weight: 0.4 kg

Key data: 400 l/min, 5

Coolant tank 20 m3 consisting of 2 tanks that are joined together. From container 1 there is an overflow into container 2. Installation area approx. 2500 x 4000 mm for both containers. Was used as a container for pure oil for the grinding process, so there was no rust at all. Condition very good!

coolant capacity: 20 m3l/h Headroom: 20 m operating pressure: 2 bar voltage: 380/660 V / 60 Hz motor type: LA 3166 motor speed: 1460 U/min Motor Capacity: 15 kW weight: 250 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Fabr. no. 22/00-125616 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Throughput depends on material type, speed, and cutting set Capacity: up to 4.000 kg/h Electric power: 42 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 186 Length: 176 Height: 172

coolant capacity: 50 - 250 m3l/h Headroom: 5 - 12 m operating pressure: max 1,2 bar voltage: 380 V / 50 Hz motor type: 132 M 4 motor speed: 1500 U/min Motor Capacity: 7,5 kW weight: 250 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Fabr. no. 22/00-125616 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dionex ICS 2000 Ion Chromatograph

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Length: 665 mm -Material: Steel -Quantity: 2x mounting cubes available Price: per piece -Dimensions: 665/200/H250 mm -Weight: 117 kg/unit

Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 200 mm -Bolt circle: Ø134 mm -Socket: Short cone 6, cone Ø 101 - 106 mm -Overall dimensions: Ø 200 x 145 mm -Weight: 7.6 kg

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: on solid base frame -Clamping surface: 2015 x 1000 mm -Table height: 930 mm -Plate thickness: 30 mm -Transport dimensions: 2015/1000/H930 mm -Weight: 973 kg

Etipack Strong 200 automatic labeller; cleaned and tested; Working width 20-200mm; Speed 20m/min.; Speed adjustable; with tripod. Automatic labeller Etipack Strong 200; cleaned and checked; working width 20-200mm; speed up to 20m/min.; adjustable in speed; included stand.

Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator -Manufacturer: Dukane, iQ Aim ultrasonic generator -Type: 20HB260-2P-C3 -Number: 12x generator available -Price: per piece -Dimensions: 430/265/H140 mm -Weight: 12.2 kg/pc.

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 200 mm -Mount: Short cone 4 / Cone Ø 61-63 mm Short cone flange with camlock fastening -Bolt circle: Ø 82 mm -Through hole: Ø 41 mm -Dimensions: Ø 200 x 125 mm -Weight: 9.5 kg

PLC control, digital output, PLC expansion module -Manufacturer: Siemens, Simatic ET 200eco PN Digital Output Module -Type: 6ES7 142-6BR00-0AB0 6ES7142-6BR00-0AB0 -Number: 7 modules available - Price: per piece -Dimensions: 175/60/H50 mm -Weight: 0.9 kg/pc

Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGSL-20-200-Y3A -Stroke: 200 mm -Shaft: Ø 10 mm -Dimensions: 450/85/H50 mm -Weight: 4.3 kg

Tetra Pak Hoyer Model : FF 2000 Used for : Ice cream Fruit Feeder Y.o.m : 2003 Condition : Very Good

Fan filter, fan array, air cooler, control cabinet fan, filter fan, cabinet cooler, axial fan -Manufacturer: Shen Zhen, axial fan type FP-20060EX S1-B -Voltage: 220-240 V / 65 W -Number: 5 fans available -Price: per piece -Dimensions: 200/200/H60 mm -Weight: 1.4 kg

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Lenze ABW, live centering tip -Type: ZN 204 -Recording: MK4 -Dimensions: Ø 69 x 210 mm -Weight: 2.1 kg

Angle bracket, locksmithsquare, flat angle -Flat angle: Leg length 300 x 200 mm -Quantity: 1x flat angle available -Dimensions: 300/200/H5 mm -Weight: 0.7 kg

Manufacturer: ETSCHEID Content: 2000 l Equipped with agitator With integrated cleaning unit (CIP) Including cooling unit very good condition, fully functional

PLC controller, connection module for digital electronic modules, terminal module, bus adapter -Manufacturer: Siemens, Bus adapter Simatic ET 200SP -Type: 6ES7193-6AR00-0AA0 6ES7 193-6AR00-0AA0 -Number: 4 modules available -Price: per piece -Dimensions: 70/60/H20 mm -Weight: 0.1 kg/pc.

Sind cutter 200 liters with vacuum Type: SVC 200 Completely made of special stainless steel 200-liter bowl made of stainless steel Shaft speed 200/1800/3600 rpm Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in a set Dimensions: 260x220x195cm Electric power: 63 kW Voltage: 400 V, 50 Hz Weight 5.500 kg

Display, display module, display panel, text display -Manufacturer: Siemens, Text display Simatic S7 TD 200 -Type: 6ES7272-0AA00-0YA0 6ES7 272-0AA00-0YA0 -Dimensions: 150/70/H30 mm -Weight: 0.3 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 200 mm -Piston rod: Ø 20 mm -Mounting: Bolt circle Ø 85 x 8 mm / see photos -Number: 4 cylinders available -Price: per piece -Dimensions: 440/104/H123 mm -Weight: 8.5 kg/pc.

Length stop, rip fence, saw stop, material stop, motorized length stop, controlled length stop, feed stand, support foot with angle piece -Length stop: Support foot with angle piece for various machining options -Shafts: Ø 45 mm -Displacement lengths: see photos -Dimensions: 1000/200/H560 mm -Weight: 18.7 kg

Flange connection, V-flange, pipe flange, stainless steel flange, safety breakaway coupling -Pipe flange: Stainless steel flange -Type: HG/T20592-2009 PL200 PN10 304 -Diameter: Inside 213 mm -Bolt circle: Ø 295 x 22 mm -Dimensions: Ø 340 x 265 mm -Weight: 26.1 kg

The US-2000 AD with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band Width:20mm

Tow hitch, trailer coupling, jaw coupling -Manufacturer: AL-KO, axle braked -Type: B 2000-4 -Brake: Type 3081 A -Brake drum: Ø 325 mm Recess Ø 160 mm / Bolt circle Ø 205 mm -Dimensions: see photos -Transport dimensions: 1750/660/H340 mm -Weight: 134 kg

Grinder for frozen block meat Throughput depends on material type, speed, and cutting set Capacity: up to 8.000 kg/h Electric power: 66 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 235 Length: 200 Height: 185

Chocolate tanks chocolate kettle 200l chocolate kettle, stainless bowl and agitator, digital temp control, side bottom discharge, 3Ph

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 15 -Tire size: 200/50-10/ 6.50 SC 15 RIM 6.50 F-10 -Quantity: 24 pieces available -Price: per piece -Dimensions: Ø 450 x 200 mm -Weight: 23 kg/pc.

Oil cabinet, oil cabinet, oil pump, oil dispensing station -with counter -Extendable hose with dispensing nozzle -Compressed air connection

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Clamping angle: 200 x 200 mm -centrically exciting -Mouth size: Ø 200 mm -Weight: 30 kg

Type: SC 200 Completely made of special stainless steel 200-liter bowl made of stainless steel Frequency speed regulation 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in set Machine dimensions in cm: Width: 220 Depth: 200 Height: 182 Electric power: 57 kW Voltage: 400 V, 50 Hz

Cylindrical roller bearings -Type: NJ 206 -d: Inside: 30 mm -D: Outer: 62 mm -B: Width: 16 mm -Quantity: 50x cylindrical roller bearings available -Price: per piece -Weight: 0.2 kg/piece

All stainless steel Hopper capacity: 2000 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 18 KW Installation dimensions of machines in cm: Width: 193 Length: 227 Height: 215

FADAL VMC 2016L CNC machining center was built in 1997 in the United States. The machine, designed for precision machining of workpieces, has a large, fully illuminated work area, with automatic tool changer (ATC) and a reliable spindle. Excellent dynamics and feed repeatability are ensured by precision guideways along which the X,Y,Z axes are guided. All this is complemented by the intuitive CNC control where machining programmes are created in just a few steps. All this makes the VMC 2016L CNC vertical machining center the perfect solution for any production facility. Technical specifications of the FADAL VMC 2016L CNC milling machine - CNC controller: FADAL CNC 32MP - feed in the X/Y/Z axis: 500/400/700 mm - work table dimensions (L x W): 750 x 410 mm - number of T-slots: 3 - maximum spindle rotational speed: 7500 rpm - automatic tool changer (ATC) - maximum tool diameter: 7 ...