mak 20 used for sale

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 200 mm -Hole circle: Ø 170/4 x M16 -Hole circle: Ø 150/M16 -Dimensions: Ø 200/H159 mm -Weight: 16.3 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 200 mm -Hole circle: Ø 132/M16 -Price: per piece -Number: 3 pieces -Dimensions: Ø 200/H51 mm -Weight: 7.9 kg

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: MTU Engine: 12 V 2000 G 26 F Engine No.: 544101778 Power: 709 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Heating oil or diesel B7 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HC 634 G Gene. No.: 23011477 Generator power: 810 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built-in Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 2.050 Height approx. mm:  ...

Execution: Aggregate type: stationary Execution: Contianer 20 Ft. Technical data engine: Engine manufacturer: Volvo Engine: TAD 733 GE Engine No.: in production Power: 201 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Heating oil or diesel B7 Technical data generator: Generator manufacturer: Leroy Somer Generator type: VALLEY 044 M M 6S/4 Gene. No.: in production Generator power: 200 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 360 Dimensions of the power unit: Width approx. mm: 2.460 ...

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 75 mm -Piston diameter: 32 mm -Piston rod: 12 mm - Price: per piece - Quantity: 2 pieces -Dimensions: 238/47/H47 mm -Weight: 0.9 kg

Stopping and stirring machine Rego SM 2000 M with 1 stirring tank and 2 whisks immediately available in stock. -with manual boiler lifting crank -380 volts -with automatic timer -with digital speed control -Machine is completely repainted

Motor for folding machine Eurofold / Foldmaster 235 / 435 / 200 / 400 Art.: PS2356

Clamping plate with T-slots, tensioning aid, plate field, welding table, welding table, plate boring machine -Width: 200 mm -Length: 1500 mm -Height: 40 mm -Groove width: 14 mm -Weight: 80 kg

Clamping plate with T-slots, tensioning aid, plate field, welding table, welding table, plate boring machine -Width: 200 mm -Length: 1800 mm -Height: 45 mm -Groove width: 11 mm -Weight: 117 kg

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, drill grinding machine -Grinding disc: max. Ø 200 x 32 mm -Speed: 3000 rpm -Engine power: 0.9 kW -Operating voltage: 380 volts -Dimensions: 1100/540/H1140 mm -Weight: 125 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Mounting thread: M20 -Gradient: 2.5 mm -Weight: 32 kg

Stock# UG6367 Used stainless steel contact parts planetary mixer by Tonelli, Universal Model P300 (IT). Machine has two agitators and is equipped with three mobile stainless steel mixing pans, each with volume 300 l. Last time used in food industry.

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Throughout: Ø 60 mm -Weight: 14.5 kg

Heavy-duty casters, heavy-duty wheel, tires -Roll size: Ø 200 x 50 mm -Inner diameter: 20 mm x 64 mm -Price: per piece -Quantity: 2 wheels available -Weight: 4.5 kg/piece

Three-jaw chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Passage: Ø 54 mm -Recess: Ø 160 mm -Weight: 12.6 kg

Three-jaw chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Passage: Ø 50 mm -Weight: 13.5 kg

Three-jaw lining, 3-jaw lining -Feed size: Ø 200 mm -Passage: Ø 56 mm -Rezess: Ø 75 mm, Ø 103 mm -Weight: 17.9 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Admission thread: M40 -Pitch: 1.5 mm -Rezess: Ø 180 mm -Weight: 22.5 kg

Three-jaw chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Passage: Ø 54 mm -Weight: 12.6 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Feed size: Ø 200 m -Through hole: Ø 54 mm -Short cones: 5 -Bolt circle: 105 mm -Weight: 16.2 kg

Three-jaw chuck, 3-jaw chuck -Type: OM200-ZJ -Chuck size: O 200 mm -Passage: O 56 mm -Admission thread: M60 x 5.5 mm -Weight: 19.8 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 54 mm -Rezess: Ø 159 mm -Hole circle: 176 mm -Weight: 14.2 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -threaded mounting -Through hole: Ø 53 mm -Weight: 19.7 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Hole circle: 156 mm -Passage: Ø 54 mm -Weight: 12.7 kg

Flange mounting, driving flange -Chuck flange with: driving pin -Outer diameter: 200 mm -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 5 -Hole circle: Ø 104.8 mm -Weight: 9 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Admission recess: Ø 168 mm -Passage: Ø 55 mm -Weight: 12 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 200 mm -Piston diameter: 43 mm -Piston rod: 25 mm -Total length: 390 mm -Total length extended: 590 mm -Price: per piece -Quantity: 2 available -Dimensions: 100/100/H390 mm -Weight: 6.5 kg/piece

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 60 mm -Piston rod: 32 mm -Total length: 425 mm -Total length extended: 625 mm -Price: per piece -Number: 2x available -Dimensions: 150/150/H425 mm -Weight: 12.1 kg/piece

Fan, fan, electric motor, blower -Speed: 1300 rpm -Fan diameter: mm -Dimensions: 82/82/H86 mm -Weight: 1.3 kg

PLC, PC, control, position controller, Hitachi Seiki, HC400 -The PC comes: from a Hitachi Seiki HC400 machining center -Manufacturer: Sanyo Denki -PC type: APC-9-203-1 -Dimensions: 300/150/H160 mm -Weight: 3.6 kg

4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -Punching tool with: bending function -Admission imensions: 300/205/H445 mm -Weight: 100 kg

4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -Punching tool with: bending function -Take bolt: 40 mm -Dimensions: 255/205/H210 mm -Weight: 25 kg

Micrometer, micrometer screw -Measuring range: 200 - 225 mm -without: test piece -Also other sizes: available -Weight: 1.4 kg

Electric motor, three-phase motor -Volt: 415 V. -Power: 0.063/0.4 kW -Speed: 460/2840 rpm -Shaft: Ø 17 x 35 mm -Construction: B14 -Protection class: IP 65 -Dimensions: 330/220/H170 mm -Weight: 9 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 95-205 mm adjustable -Recording: MK2 -Dimensions: 275/260/H265 mm -Weight: 23 kg

Hubkneter, Fabr. Diosna Type D200 A

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Weight: 12 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 54 mm -with: base plate -Weight: 26 kg

gear motor, electric motor, three-phase motor, electric gear motor -Speed: 19 rpm -Power: 0.37 kW -Design: B5 -Shaft: Ø 25 x 50 mm -Protection class: IP 55 -Quantity: 1x available -Price: per piece -Dimensions: 395/160/H255 mm -Weight: 16 kg

Three-phase motor, electric motor -Power: 30 kW -Speed: 2945 rpm -Protection class: IP 55 -Construction: B5 -Shaft: Ø 55 mm -Number: 1x available (1x without fan cover and fan disc) -Price: per piece -Dimensions: 760/400/H500 mm -Weight: 237 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 500 x 200 mm -4x T slots: 14 mm -Clamping angle: rotatable, swiveling, tiltable -Foot recording: mm -Dimensions: 500/300/H210 mm -Weight: 50.5 kg

Diaphragm pump, centrifugal pump, water pump, chemical pump -from: scrubbing machine make Gansow -Delivery rate: 11.3 l/min -Number: 5x available -Price: per piece -Dimensions: 220/210/H120 mm -Weight: 2 kg

Machine vise, sturdy vise, drill vise -Jaw width: 213 x 55 mm -Clamping depth: max. 208 mm -Dimensions: 670/240/H140 mm -Weight: 98.5 kg

electric motor, three-phase motor -Voltage: 36 V -Power: 0.37 kW -Speed: 320 rpm -Shaft diameter: 19 x 40 mm -Dimensions: Ø 166/H192 mm -Quantity: 2 available -Price: per piece -Weight: 14 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.75 kW -Speed: 3000 rpm -Max. grinding wheels: Ø 200 x 32 mm -Operating voltage: 380 volts -Dimensions: 540/280/H1230 mm -Weight: 116 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Transfer in current condition as seen -Speed: 112/224 rpm -Power: 0.5/0.7 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 400/220/H205 mm -Weight: 23 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Passage: Ø 50 mm -one set: hard interchangeable jaws -Weight: 15 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 200 mm -hard: interchangeable jaws -Base plate for: machine table -Passage: Ø 54 mm -Weight: 22 kg