mak 20 used for sale

Working width: 4000 mm Working height: 2600 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----------------------------- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center hole ...

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 200/140 mm -Height: 58 mm -Number: 5x pillows available -Price: per piece -Weight: 2.6 kg/piece

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 200/114 mm -Height: 32 mm -Number: 4x pillows available -Price: per piece -Weight: 2.1 kg/piece

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 200/136 mm -Height: 57 mm -Number: 7x pillows available -Price: per piece -Weight: 2.6 kg/piece

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 300/200 mm -Height: 60 mm -Weight: 6 kg

Electronically controlled, programmable roller feed for advancing and precise positioning of strip material SIEMENS® PLC – Control Largest sheet strip width 200 mm (optionally up to 800 mm) Sheet thickness range 0.8 to 3 mm Steel sheet 400 N/mm² - (optional thicker sheets on request) Rollers Ø 95 mm Maximum practical feed rate in operation with eccentric presses: 120 strokes per minute with a maximum feed length of 80 mm per stroke

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 200/142 mm -Height: 20 mm -Hole circle: Ø 171/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 192x pillows available -Price: per piece -Weight: 0.3 kg/piece

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 200 mm -Hole circle: Ø 120/Ø 12 mm -Dimensions: Ø 200/H37 mm -Weight: 7.5 kg

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

three-jaw chuck, three-jaw lathe chuck -Handover: in current condition as viewed -Short cone: has been shortened -Chuck size: Ø 200 mm -Through hole: Ø 54 mm -Hole: cone Ø 104.5 mm -as per pictures, without additional accessories -Weight 14.4 kg

Load capacity 2000 kg Length 24 m

Capping machine for bottles. Capper incl. various format parts, exit turntable, infeed vibrators. The machine stays in line with a filling machine GRONINGER, DFV 6000.

Screwdriver Alcoa Year of construction: 1991 Type: DC 2090ZS Control: Siemens S5 Capacity: up to 50,000 bhp

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outside/Inside: Ø 300/202 mm -Height: 20 mm -Hole circle: Ø 250/10 mm -Delivery of: steel/stainless steel cover plates possible -Number: 71x pillows available -Price: per piece -Weight: 1 kg/piece

Short-stroke cylinders, pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders - Stroke: 200 mm - Piston rod: O 20 mm -Dimensions: 265/108 / H112 mm mm -Weight: 4.3 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-80-200-PPV-A -Piston: Ø 80 mm -Stroke: 200 mm -Max. Pressure: 12 bar -Dimensions: 420/95/H95 mm -Weight: 5 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Piston rod: Ø 20 mm -Stroke: 200 mm -Dimensions: 75/75/H500 mm -Weight: 3.9 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Festo: DSW-63-200 PPV -Stroke: 200 mm -Piston diameter: 63 mm -Dimensions: Ø 70/430 mm -Weight: 2.5 kg

Kettner Type: Pressant 2000EP Model: Box Depalletizer Year of construction: 1990 Capacity: max 40 pallets/pcs.

Kettner Year of construction: 1990 Type: Pressant 2000EP Model: Box Palletizer Capacity: max. 40 pallets/pcs.

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer: Ø 200 mm -Height: 58 mm -Weight: 2.6 kg/piece

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Leuco DIA wood router: 200X12/SB11X30 -Speed: 3800 - 6500 rpm -DP222145-80261567 -with: box -Dimensions: 305/305/H40 mm -Weight: 2.7 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Leuco DIA wood router: 200x10/SB9x30 -Speed: 3800 - 6500 rpm -DP222145-80261568 -with: box -Dimensions: 300/300/H80 mm -Weight: 4.1 kg

1 x Weftstraithner Fab: PLEVA Type: SL1 WORKING WIDTH 1800 MM. for use in Stenter- sanforizing and all finisching Machine. the Machine is with wheel and can move to different machines.

For sale : 200/250 ml Square conversion kit for A3flex machine. I send photos by email.

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Weight: 12.5 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Weight: 14 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Feed size: Ø 200 m -Through hole: Ø 54 mm -Weight: 12 kg

Max. bending length: 2000 mm Max. sheet thickness: 8 mm steel Clockwise and counterclockwise rotation Motorized rear roller infeed Safety kill switch Conical rounds possible

Rheometer Make: Alpha Technologies Model MDR 2000 P

Mooney Viscometer Make: Alpha Technologies Model MV 2000 Rotational Speed 0.1 to 10 rpm, temperature Range ambient to 200C, torque Range 0.01 to 200 MU, rotors large: 38.10 mm D, small: 30.48 mm D.

Stock# U2412-3 Unused progressing cavity pump by Allweiler type AEB 1E 200. Pump is driven via Nord gearbox and el motor 2.2 kW, 1445 rpm, 230/400 V, 50 hz. Pump works with rotation up to 150 rpm. Working output depends on product and rotation and can reach from 5 l/min, up to 500 l/min. At current rotation on gearbox pump can reach 60 l/min / 3600 l/h. Mounted on carbon steel base.

Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 200 mm -Number of teeth: 12 -Indexable inserts: Carbide -Recording: SK50 -Manufacturer: Kelch -1x SK50 shank for end mill: Ø 40 mm -Weight: 18 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 60 mm -Piston rod: Ø 25 mm -Diameter eyes: 22 mm -Stroke: 202 mm -Dimensions: 455/83/H95 mm -Weight: 8 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor manufacturer: ABM -Gearbox manufacturer: ABM -Motor power: 0.37 kW -Speed: 45 rpm -Construction: B3 -Drive shaft: Ø 30 mm -Protection class: IP 44/54 -Dimensions: 550/230/H195 mm -Weight: 30 kg

Modell: PPK STADLER Motor: ELECTRIC Operative Data: W. 6.500 mm x L. 2.500 mm x H. 4.000 mm Hourly Production: 15 t/h N° Paddles: 2x 6 Pz Useful Length: 2.180 mm Power Consumption: 4 kW N° Fractions: 2 Weight: 8.000 Kg Treated Materials: PAPER / CARDBOARD

Monsanto ODR 2000 E Rheometer With manual

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 200 mm -Hole circle: Ø 176/Ø 11 mm -Hole circle: Ø 114/4 x M10 -Dimensions: Ø 200/H20 mm -Weight: 3.4 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 120 mm -Piston rod: Ø 36 mm -Stroke: 200 mm -Price: per piece -Number: 3 pieces -Dimensions: 755/120/H120 mm -Weight: 20.8 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Hole circle: Ø 133 mm -Passage: Ø 20 mm -Weight: 22.1 kg

table length: 600 mm table width: 400 mm x-axis: 400 mm y-axis: 300 mm z-axis: 350 mm workpiece sizes: 900 x 630 x 350 mm volume: 490 L total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

-extendable Diosna lifting kneader -with 2 stainless steel shells -per kettle for max. 200kg dough or for max. 125kg flour -2 speeds slow and fast -Machine completely repainted -with 2 to 4 boilers to buy

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: 200x3-III -TGL: 30-2332 -Chuck size: Ø 200 mm -Weight: 16.7 kg

Mobile multi-format machine for filling and closing vials and bottles with variable closing systems.. - Pick & Place Station Presskappe inkl. entsprechende RNA-Fördereinheit ab Vibrator (Schwingförderer) - Container size: up to 250 ml. Machine incl. feeding turntable, dosing system FLEXICON, capping system, PLC SIEMENS Simatic etc

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 200 mm -Short taper: 6 -Weight: 25 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 200 mm -Hole circle: Ø 175 mm -Weight: 21 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Hole circle: Ø 133 mm -Passage: Ø 20 mm -Weight: 28 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: B200x3x6 -TGL: 30-2332 -Chuck size: Ø 200 mm -Cone: Ø 104 mm -Hole circle: Ø 132 mm -Through hole: Ø 54 mm -Weight: 15 kg

Key data: 360 , 450 , 400

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC 13 72 A (02-13) Engine No.: in production Power: 393 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S4L1D-G41 Gene. No.: in production Generator power: 450 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 800 Dimensions of the power unit: Width approx. mm: 1.600 Height approx. mm ...

Key data: 400 , 500 , 400

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Penta Engine: TAD 1641 GE Engine No.: in production Power: 430 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 C Gene. No.: in production Generator power: 500 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 800 Dimensions of the power unit: Width approx. mm: 1.600 Height approx. mm: 2.460 ...