134,760 used machines on RESALE, but how to find them? Machine Search
Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tailstock taper MT 5 Tailstock quill stroke 180 mm Tailstock traverse adjustment ± 12 mm Motor rating main drive 7,5 kW Overall dimensions 3,34x1,15x1,46 m Weight 2.720 kg 3-jaw chuck Ø 315 mm 4- ...
- Charge air cooler MWM - Suitable for several motors - Please note! Price per piece! It is a scrap part. - References -> 12301219 - 12141936 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By ...
6-wheel mower with four-wheel drive, Farymann 2 cylinder diesel engine, hydrostatic drive, power steering. Hydraulic inclination adjustment, track width adjustment, spread arm with 180 cm double knife mower beam. Tyres 6x 4.50-14 AS.
- Hatch cover MWM 12302310 - Suitable for several motors - Please note! Price per piece! - References -> 12302310 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and inte ...
- Cover MWM 12302480 - Suitable for several motors - Please note! Price per piece! - References -> 12302480 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrati ...
Kersten K 2000, 6.6 kw/9 hp Honda four-stroke gasoline engine, electric and manual start device, stepless hydrostatic drive forward/backward 0-4 km/h, differential, wheels 4.00-8", hydraulic plug-in couplings for device drive. Front sweeper F 1000, working width approx. 1000 mm, manually swivelled left and right.
- Air cleaner fastening MWM 12300402 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new tech ...
The press brake HAMMERLE BM 200-3100 press brake was built in 1996. The folding machine was serviced regularly. Technical parameters of the press: - control: INFINITRON - number of NC axes: 11 - pressure: 200 tons - bending length: 3100 mm - working stroke: 400 mm - distance between the body walls: 3240 mm - maximum distance between the table and the bumper: 965 mm - voltage: 3 x 400 Volt - control voltage: 24 V = - total power: 28 kW - deflection arrow compensation - total machine width: 4400 mm - total height of the press: 3400 mm - weight of the press: 16 600 kg
- Raw water line MWM 12141963 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologie ...
Rated power at 50%ED: 20kVA Short-circuit current: 15kA Electrode force: 420daN Extension: 130-500mm --- Controls: RS 17 (5-times, 2-program) --- incl. additional options: - Foot switch "powerless set-up" - Tube arm Mk2, straight - Main switch - 3m connection cable with plug --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
- Overflow MWM 12325735 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and ...
- Guide tube MWM 12135199 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies an ...
- Cooling water line MWM 12300542 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technol ...
-Prefab. wiring system MWM 12323818 & 12323819 - Suitable for several motors - Please note! Price per piece! -12323818 ; 1232-3818 ; 1232 3818 - Predecessors: 12479560 ; 1247-9560 ; 1247 9560 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of s ...
used
The scope of delivery includes: 01x Depth bar frame, used Material colour: sendzimir galvanized Total length: approx. 1,250 mm for shelf depth: 1,200 mm Clear span: approx. 1,100 mm Truss support: approx. 50 mm Support angle: L: approx. 80 x 80 mm Total width: approx. 860 mm Inner width: approx. 855 mm Material thickness: approx. 3 mm Side frame: Length: approx. 1.2450 - 1.070 mm Front Tapered Width: approx. 200 mm Height: approx. 195 mm End stop: Width: approx. 200 mm Height approx. 195 mm Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: It is a used item, there may be scratches, dents and traces of use. This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which are separately depending o ...
Double grinding machine TS 200 SD P with SUCTION, machine stand, emergency stop push button and brake smooth-running, maintenance-free motor Protective covers closed at the sides Stable, adjustable workpiece supports High level of safety comfort thanks to adjustable spark deflectors suitable for grinding, deburring and sharpening tools of all kinds, metal profiles, etc. Motor Circuit Breakers and Undervoltage Trippers Double-sided spark/eye protection connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single-shift operation - Suction nozzle Ø (mm): 42 - Grinding wheel (mm): 200 x 32 x 32 - Machine dimension without packaging (mm): 250 x 470 230 - Speed (1/min): 2550 - Three-phase motor 400 V (kW)1: Operating mode S2-30 min (short-term operation) - Weight (kg): 60 Shipping time:immediately, from stock
HENKE UNI 2000-6000 Built in 1995 Format: 400x400 2-speed 400x600 2-speed 1. Distributor for attachment 2. Doser 3. Settling device 4. Chain conveyor 5. Roller conveyor 6. Plate destacker 7. Cleaning device 8. Plate oiler 9. Pawl conveyor 10. Stacking device 11. Plate removal device with rotating device 12. Control for UNI 2000 13. Belt conveyor with lifting 14. Belt conveyor 15. Plate Displays 16. Carrier chain conveyor 17. Push-off device with roller table 18. Autom. Control for packaging 19. Fader Puller HENKE UNI 2000-6000 Year of production: 1995 Sizes: 400x400 2x 400x600 2x 1. First layer distributor 2. Dozer 3. Take-off device 4. Chain conveyer 5. Roll conveyer 6. Destacking device 7. Cleaning device 8. Oiling device 9. Slap converter 10. Stacking device with rotating device 11. Arm with rotating device 12. Control for UNI 2000 1 ...
- High pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, - Cold water / hot water / steam 32 bar to 140°C / high pressure steam 150 or 200 bar to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and weight: 110x64x98cm, approx. 150kg - incl. 10 m high-pressure hose, spray gun, lance and flat jet dues 25°
Key data: 200 KW, 250 kVA
ENGINE: Man E2676LE202 FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 250(kVA) / 200(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: BIOGAS COOLING: WATER-COOLED WEIGHT: 4400kg DIMENSIONS L/W/HEIGHT (MM): 430013002000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details an ...
Description Volume flow 480 litres/min. 16.9 m3/h Pressure max. 10 bar Nominal power 4 kW Noise level 76 dB Voltage: 400 V Tank: 200 litres Weight: 140 kg Dimensions: 1460 x 640 x 1140 mm
Wet belt grinding machine EDERTAL BSM 200 The Edertal wet belt sander is ideally suited for sharpening knives, hatchets, cutter knives, axes, etc. The wet grinding ensures a long service life of the cutting edges, as annealing of the blades is hardly possible. In addition, the permanent water cooling achieves an optimal and permanent sharpening result. The BSM 200 grinding machine is a compact, robust and high-quality grinding machine that is made entirely of stainless steel. The sanding belt attached to the right side is tensioned and aligned by a stable clamping device. On the left-hand felt disc, in combination with a polishing paste, the ground tools can be tightened and deburred. The design and the material used comply with the hygienic and occupational health and safety requirements as well as the EC directives. Specifications: Power supply: 230 V Input power: 3 ...
Swash-up machine Material : Stainless steel --> 3-deck machine, screening in 4 fractions.
Key data: 200 KW, 250 kVA, 400 V
MODEL: EQ-VP250200 GENERATOR ENGINE: Volvo Penta TAD734GE FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 250(kVA) / 200(kW) CYLINDERS: 6 FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1950kg DIMENSIONS L/W/HEIGHT (MM): 260011001530 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address ...
Description for use in the laboratory and for production Round drying chamber Two-chamber systems with separation valve Folding door Materiali Stainless steel 316TI, 316L Solvent capacitors Automatic cleaning CIP Process visualization Product shells Explosion protection Version GMP compliant version Documentation / qualification from year 2015 Purchase price per piece was 40,000 euros plus VAT purchased for dehumidification of paper i.e. the inserts with the roll transport can be removed
MARCHESINI FILLING MACHINE, MODEL MI 200 D.I. Year of construction: 2011 Automatic double-channel linear filling machine for plastic tubes. A great choice for packaging cosmetic and pharmaceutical products. Usable in sterile environments. The customization allows for the maximum production flexibility. possibility of simultaneous installation of different closure systems (metal and hot air) multiple feeding options and adjustable format change via HMI OUTPUT up to 200 pieces/min PRODUCT RANGE Dosage range: 1 - 320 ml Tube height with cap: 50 - 250mm Tube diameter: 11 - 50mm ELECTRICAL CHARACTERISTICS Nominal voltage: 3x400v +N+PE Frequency: 500 Hz 6 kA 18 A OTHER CHARACTERISTICS Weight: 3800 kg
Processing plant Manufacturer: Koruma Type: Disho A140/200 No.: 4,209 Built: 1988 with user manual no vacuum, no double jacket with control cabinet LWH: 1400 x 850 x 1450 mm
Bin lifter Type Lifting equipment Height 1900 Width 1500 mm Length 1800 mm Main material Stainlees Steel Time of realisation 2-3 weeks
Key data: 200 KW, 250 kVA, 400 V
MODEL: EQ-D250200 ENGINE: Deutz BF6M1015C-LA G1A FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 250(kVA) / 200(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 3300kg DIMENSIONS L/W/HEIGHT (MM): 380012502000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inqui ...
Key data: 1600 KW, 2000 kVA, 400 V
ENGINE: 4016TAG2A FREQUENCY (HZ): 50 POWER: 2000kVA / 1600(kW) CONTROL SYSTEM: DSE / ComAp FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 17274kg DIMENSIONS L/W/HEIGHT (MM): 750022002250 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address For more information or i ...
Mechanic plate bending machine Goyar 3C-25/20. Bending lenght: 2000mm. Bending capacity: 25mm. Diameter of upper cylinder: 285mm. Diameter of lower cylinders: 235mm. Main motor power: 20cv. Bending speed: 5 mpm. Weight: 5500Kgs.
Hobart A 200 Planetary Stirrer 3 speed full gearbox 1st gear 107 rpm 2nd gear 198 rpm 3rd gear 361 rpm Boiler capacity 20 l Very good operational condition, directly from production!
SYNTEGON CARTRIDGE FILLING LINE Year of construction: 2023 Complete line, never installed. Composed of Washing Machine Type RRU 2053 C Before the cartridges can be safely filled and closed, they need to undergo a thorough external cleaning to remove product residues and other contaminants, preventing harmful substances from compromising operator and patient safety. The designed solutions allow to externally clean a wide variety of containers, with special emphasis on fast and easy operations. PRODUCTION CHARACTERISTICS Range containers: max. 10 ml Output/h: up to 21,600 Hot Air Laminar Flow Tunnel Type HQL 3320 This tunnel, highly flexible and cost-effective thanks to their modular set-up and high level of automation, uses dry heat to sterilize a wide range of containers safely and reliably, including pre-cleaned ampoules, cartridges, and syringes using ...
JORNS MAXI LINE 200SW folding machine was built in 2007 in Switzerland. The machine, designed for precision bending of various types of sheet metal with a maximum length of 6400 mm, is a HIGH variant, which offers a faster work speed of up to 25% compared to the standard model. During its use, the JORNS MAXI LINE 200 hydraulic folding machine has undergone regular maintenance. All moving parts and the bending bar were replaced with original manufacturer’s parts. Technical data of the JORNS MAXI LINE 200SW CNC folding machine - control system CNC 600 - maximum sheet metal length: 6400 mm - maximum sheet metal thickness: 2 mm - rear measuring table type 91 with AC servo motor - rear measuring table range: 1000 mm - roller shear SM 3 - foot switch - maximum hydraulic pressure: 250 bar - motor power: 7.5 kW - power supply: 380-420 V; 50 Hz
Fixed bed milling machine Zayer 2000BF. Table: 2500x700mm. Longitudinal travel: 2000mm. Cross travel: 1000mm. Vertical travel: 1000mm. ISO50. Speeds: 18. (28-1800rpm). Power: 15cv. Weight: 13000Kgs. Equipped with DRO Fagor.
Artech HD granulator SG 80 120 with 200 kW. Well suited for EBS, cables, used tires, plastics, AzV. Well maintained machine. Recently overhauled.
Inv. Num. : 5457 Type: UB 63/2000 Producer: HOL-MONTA Created: 2001 Parameters: Control system: Kavalír Maximum grinding length: 2000 mm Grinding diameter: 630 mm Tip stroke: 375 mm Total power requirement: 41 kW
Code 61063 Description Surface grinding machine Make ABA Model FFU 2000/60 Serial No. 208 125 Control Abamatic 3 Year 1986 Tablesize 2510 x 500 mm Grinding surface L x B x H 2000 x 600 x 700 mm Magnetical plate size L x B 2000 x 500 mm Speed table movement 3 – 30 m/min. Max. distance table – centre grinding wheel 900 mm Grinding stone dim. Stone x Wide x Taper Ø 400 x 50 x Ø 127 mm Spindel power 26 kW Spindel speed 1600 - 3000 rpm Motor power 26 kW – 380 Volt Total electr.com. 34 kW Total space L x W x H 7000 x 3500 x 2650 mm Weight 10500 kgs Accessoiries Elec. Magneticplate 2000 x 500 mm Coolant with paperfilter Digital readout Grinding stones, etc. Condition Machine is in good condition
Banding system ATS US 2000 AB Cornerline; good condition; serviced and tested by ATS customer service; bandwidth 30mm; frame size 360x160mm; Min. Product width 80mm, max.165mm; Max. Product length 270mm; Max. Produnkt height 110mm; Compressed air required. Ultra sonic banding machine ATS US 2000 AB Cornerline; good condition; cleaned and checked by the support of ATS Germany; band width 30mm; frame size 360x160mm; min. product width 80mm, max.165mm; max.product lenght 270mm; product hight 110mm; pressure air needed.
Autotherm ATK 2000 cooling system 20.5 kW recooling system in 20-foot container Specifications Nominal voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Rated power: 20.5 (31.5) kW Rated current: 50 (71) A Supply line fuse: 80A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Feed: Flange SDIN2633 DIN100 PN16 Return: Flange SDIN2633 DIN100 PN16 Overflow/Drain: 2" F Well water inlet: 2" IG Well water drain: 2" IG Inlet Adiabatics: 3/4" F Filling: manual 3/4" F Water cycle Heat transfer fluid: water/glycol ( 90% / 10% ) Flow pressure: max. 10.6 bar Tank capacity: 4000 liters Free cooling circuit Pump type: Grundfos CR 45-1-1 A-F-A-E-EUUE Delivery pressure: ... 2.15 bar Flow rate: 58 m³/h Consumer group Pump type: Grundfos Hydro 2000 ME 2 CRE 32-6 A-F-A-E-EUUE Delivery pressure: max. 10.6 bar Flow rate: max. 40 m³/h Container 2 ...
MWM TCG 2016 V 12 exchange unit It is a complete, refurbished exchange unit (motor + generator + basic frame). Repaired according to manufacturer's guidelines and according to RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.
specifications: - Clamping area approx. 400 x 300 mm - Travel across x approx. 500mm - Travel along Y approx. 300mm - 2 Handwheels - Height 220 mm - 4 T - grooves 14 mm - Distance of the T - grooves approx. 72mm - Space required approx. W 1100 x D 900 x H 220 mm - Weight approx. 190 kg
Extraordinary precision Milling, engraving or cutting is possible with the highest precision, due to the high-quality inclined toothed racks installed on each axis. Ideal for processing plate material With the large machining area, the T-Rex is the best possible choice for milling plate materials, as well as for text or image engraving on 2D, 2.5D or 3D workpieces. Thanks to a assembly aid on the short side of the CNC milling machine, the work surface can be ideally and comfortably equipped with the plate material. The ball rollers allow an effortless glide of the plates. External dimensions LxWxH: 3780x2850x1950 mm Weight: circa 1950 kg Clamping surface XxY: 3030x2020 mm Travel XxYxZ: 3000x2000x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: approx. 0.015 mm Working speed: 12000 mm per minute ...
Spindle diameter 2,000 mm Turnerable diameter 2,000 mm MACHINE IN MECHANICAL/ELECTRIC RETROFIT PHASE
Very high-quality CNC – controlled precision sheet metal round bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive ...
Siemens Simoreg, 6 RB 2025-2EA00, Type D165 G200/25 M5REQ Not checked for functionality. Sold only to traders!
maximum number of results exceeded
please refine your search
