134,668 used machines on RESALE, but how to find them? Machine Search
Pieces of dough: 10-300 gr. Power: 10-60 pieces/ min digital control Stainless steel cladding rollable on rolls
TECHNICAL SPECIFICATIONS Manufacturer: HENKE Designation: Production plant for concrete block slabs Type: UNI 2000 Year of construction: 1995 Operating hours: 11,543 h COMPOSED OF: Item 010) Fully automatic rotary table top pressure press UNI 2000/600/7 Item 020) Attachment distribution device for fine-grained attachments Pos. 030) Fully automatic dividing disc dosing unit with 8-fold ejection Item 040) Fully automatic direct washout system "WESER 100/2" for flat laying (horizontal) Item 050) Moulding frame device 400 x 400 mm, 2-fold Pos. 070) 2 x chain conveyor 1.50 m long Item 080/120) Pallet destacker Item 090) Cleaning brush Item 100) Pallet oil roller Item 110) Intermediate transport Pos. 130) Plate removal device Item 160) Stacking arm with bearing block Item 170) Chain conveyor 5 m long Pos. 180) 2 x Plate Pack - Lifting Item 190) Parcel push-off device ...
High quality machine housing, 548 x 129 x 200cm hoch, KMS, mint condition -90% Special price ! If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 100 hours. The parts have minor signs of disassembly. High quality machine enclosure, length 5480, width 1285, height 2000mm, Consisting of: - Total 12.24 running metres of enclosure, - High quality frame with removable panels, all top painted, - 2 large double doors without locking system with plexiglass, - The back consists of 7 removable elements of plexiglass and sheet metal - The top is made of plexiglass all round - The roof consists of slide-on frames with plexiglass edging. - The elements are all very strong and of high quality - Incl. the many machine feet and the ...
Machine Type: TIG Inverter Welding Machine gas-cooled DC system Make Jäckle Type TIG 201 i DC Connection voltage 1 x 230 Volt Adjustment range 3 – 200 amps Duty cycle 35% ED at 200 amps 60% ED at 180 amps 100% ED at 150 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 6 mm Cooling inverter by built-in fan Cooling burner gas-cooled Design of portable assembly system Fuse protection 16 amps Dimensions L x W x H 600 x 255 x 440 mm Weight 24 kg Age approx. 10 years Condition workshop-tested, very good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch WHL 17, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 1 piece of instruction manual Warranty ...
Busch/Heidelberg combined claw pressure/vacuum pump ME 2048 BH complete with 4.5 KW AC-motor, - 0.6 bar/ + 1.0 bar, completely overhauled with all wearing parts, Heidelberg version, 1 year warranty
MWM TCG 2020 V12/V16/V20 Heat Exchangers Charge Air Coolers Intercoolers Part Number 12452511
Manufacturer: Grundfos Number: 1 Model: NB 100-200/181 A-F-A-GQQE Built: 2008 Rated flow current: 284.3 m3/h Nominal head: 33.4 m Speed: 2950 rpm Pressure: 16 bar Temperature range: 0-90 °C Power: 37 kW The pumps never went into operation after installation and therefore virtually unused. Technical specifications and data sheets are available and will be sent on request.
PLC – controlled (touch screen) multifunctional press with multiple functions Firstly, our multi-function press is a vacuum press, three-dimensional film deformation with or without membrane. Vacuum chamber size 2,340 x 1,340 mm Maximum workpiece height 60 mm Equipped with a vacuum diaphragm at the top and bottom. The press is equipped with a powerful vacuum system and a vacuum tank, which guarantees a constant and uniform supply of vacuum to the working chamber. Drive power vacuum pump 4.5 kW Vacuum tank volume 500 liters Vacuum pump flow rate 100 m³/hour Two pieces of air heat exchanger, each with a heating capacity of 3 kW. Secondly, our multi-function press is a hydraulic plate press with ten pieces of press cylinder and 200 tons pressing force – Suitable for different applications - - Cold and hot pressing - Single-sided and double-sided veneer pressing ...
with Ultra Turrax T25 Vacuum pump with controler IKAVAC Heater Huber Control unit RE 1621 l P various spare parts Operating manuals Dimensions LWH: 1200 x 800 x 860 mm Weight: approx. 100 kg
[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears
McIntyre Alpack 2000 Automatic Can Sorter The McIntyre Alpack 2000 Automatic Can Sorter provides an inexpensive way of separating large volumes of steel UBCs from high value aluminium cans Efficient, versatile, cost-effective The McIntyre Alpack 2000 Can Sorter can work both independently or be coupled with a JMC Baler to provide a complete sorting and baling system. Alpack 2000 is able to give almost 100% separation of aluminium from steel.
Used automatic packaging line by MIFLEX-MASZ model SP-200, new 2014. Automatic packaging line (recently used for packaging herbs and teas in shaped sachets) with automatic packaging in doypacks. Can also be used for other types of assortment. It consists of a packer, sachet packer with feeder and dispenser. Built on a self-supporting frame with protective covers. Equipped with independent temperature control of each sealing jaw and infinitely variable speed control. Emergency conditions are visualised on the control panel . All product contact parts are easy to dismantle for cleaning and replacement, made of P.Z. H. certified materials. Sachet dispenser AS-20 Equipped with : - unwinding of the packaging material - guide roller system - volumetric dispenser with adjustable portions - sealing system - shaped sachet punching system - control cabinet - main drive with adjustab ...
- Compensator compensator MWM 12304761 - Please note! Price per piece! - 12304761 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and proc ...
McIntyre 2035 Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong, powerful, versatile Don't be deceived by the size of the McIntyre 2035 metal baler. A lid shear force of up to 22 tonnes and a platen force of up to 45 tonnes ensure that this machine has enough power to bale a whole range of non-ferrous metals. Heavy duty, four sided, reversible lid shearing blades make light work of oversized materials and in little more that 30 seconds, the 2035 will produce baled material to the size of 14" x 8" (355mm x 200mm)
Was installed in a Husky injection moulding machine
Showroom machine / exhibition machine CMS Tecnocut - IDROLINE S 2040 Axle experience: X-axis: 4,250 mm Y-axis: 2,000 mm Z-axis: 200 mm C-axis: endless B-axis: +/- 60° Facilities: - 5-axis cutting head JD5Ax for inclined cuts up to 60° and automatic angle correction - Chain conveyor for automatic sand application - Automatic lifting doors to secure the working area - Sand dosator for automatic software controlled sand dosing - Central lubrication - Altitude probe with anti-collision system High pressure pump Greenjet Electric high-pressure pump with directly controlled servo motor Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min DÃ?SE: 0.40 mm max. Incl. assembly / training and 12 months warranty!
4-way push-mast forklift Manufacturer: BT Model: FRT 2000/4 Built: 1984 Capacity: 2000 kg Triplex mast Lifting height: 5400 mm Battery Voltage: 24V Charger Weight device Side driving possible Fork extension Condition: used, but fully functional
- Compensator Compensator MWM 12300811 Original - Suitable for several motors - Please note! Price per piece! - 12300811 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting a ...
CMS Tecnocut Easyline Cutting range / axis experience: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 150 mm Uiaw3u8 C-axis: 630° B-axis: +/- 60° Included equipment: - 5-axis snow head incl. angle correction - Sand dosing and vacuum monitoring - Height scan - CAD/CAM - Laser - Central lubrication CMS Tecnocut GREENJET Highly efficient electric high-pressure pump. Technical data Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min Opening diameter DÃ?SE: max. 0.40 mm The pressure translator with directly driven servo motor offers the following advantages: + Energy efficient + Proportional power consumption + no maintenance-free hydraulics + 75 dBA + Low maintenance due to 60% less structural components + internal water pump + ...
- Oil cool oil cooler 12302852 MWM - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new techno ...
Gas injection technology Bauer – 11 pcs. 2001 – 2007 year prod. Price - 1.500 Euro/pcs.
-suitable for Diosna Wendelkneter W 240 A boiler -Table lift tipper -Boiler pliers lock -with friction wheel drive and boiler shearer -mobile
- Compensator Compensator MWM 12300319 - Suitable for several motors - Please note! Price per piece! - 12300319 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integr ...
2000 Ltr Roversi butter Churn Double jacketed to avoid the hiumidity, see-through glass, fins inside the churn to brake down the butter and control panel self mounted. Make: Roversi Tank Volume : 2000 ltr Cream Capacity : Min 500 Litres To 1000 Litres Double jacketed 1 Door with safety closer See through glass Stainless steel production area Hzjsulook Skid mounted VISIT & INSPECT : DERBY UK, DE24 8HL , UNIT 6 ,Dairy Machinery UK Site.
- Mixture pipe MWM 12301623 - Suitable for several motors - Please note! Price per piece! - 12301623 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new t ...
- Bracket bracket MWM 12300514 - Suitable for several motors - Please note! Price per piece! - 12300514 - References: 12300515 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly ada ...
Grease baking device Jufeba TK-2000 -Fat baking device Jufeba -Type: TK 2000 -20 kW -Outside mass: 198x91cm -Basin inside mass: 194x87cm
- Exhaust gas bend exhaust manifold MWM 12304038 o. 12300448 - Suitable for several motors - Please note! Price per piece! - 12304038 o. 12300448 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. ...
- Gas mixing valve MWM 12301147 - Suitable for several motors - Please note! Price per piece! - 12301147 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating ...
new ! all stainless steel capacity 200 L. mobile 40 kg quality According to DIN 9797
- Air guide housing air duct housing MWM 12141695 - Suitable for several motors - Please note! Price per piece! - 12141695 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapti ...
Storage Tanks / Pressure Tanks in V2A Max. working pressure: 0,99 bar Test pressure: 1,5 bar with Cooling Jacket and Conical Bottom NEW TOTAL LIST Capacity: 200-1000 litres Cat-no. / Volume: 17-00176-1 200 17-00176-2 300 17-00176-3 400 17-00176-4 500 17-00176-5 625 17-00176-6 750 17-00176-7 1000 Material: V2A - AISI 304, 1.4301 Surface: outside marbled 2B=IIIC Tank upper body: with manhole lid round Ø 400 mm with 2 x handle with 6 x screws with overpressure valve (on extra charge) with 2 x thread connection DN 50 with CIP washing head (on extra charge) Tank cylinder: with cooling jacket with sample valve with spiral (on extra charge) with immersion socket for temperature indicator analog (on extra charge) Lower bottom: with clear outlet with butterfly valve DN 50 (on extra charge) with rest outlet with butterfly valve DN ...
Ladies and gentlemen, we have and now available used transformer stations Built: 2000 Power: 1000KVA Primary voltage: 20kV Secondary voltage: 690V, Switching group: DYN5 Switchgear: SF6 Immediately ready for use and available, nationwide good delivery. If you have any further questions, Mr. Serhan is here for you, available Monday to Saturday from 8 a.m. to 10 p.m. and 24 hours in case of emergency
- Mixing pipe mixture line MWM 12301281 - References: 12300476 ; 12300650 - Suitable for several motors - Please note! Price per piece! - 12301281 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proje ...
Machine weight: 39,000 kg Faceplate diameter 2000 mm number of supports: 2 pcs. Dimensions : Height 6280 mm width 6600 mm length 4800 mm Extras: Right support with turret head, left and side - sliders. Digital indication of NS 114. Technical condition at the time of sale: Defective rotary amplifier main drive-replacement is required. Require replacement of cables and wires external piping:-machine control cabinets. Repair and adjustment of electrical parts. Not operated since 1994 The maximum dimensions of a workpiece Height 1300 mm Diameter of 2000 mm Weight 15 000 kg
Arburg 470C-2000-675 (No. 40) without picker Built: 1998 TECHNICAL DATA Screw diameter [mm]: 60 Spray weight [g]: 427 Spray pressure [bar]: 1440 Closing force [kN]: 2000 Tie bar distance [mm]: 470x470 Clamping plate size [mm]: 715x715 Tool installation height min. [mm]: 250 Control Control: Selogica Monitor: Yes Control cabinet: Yes Language: Polish, German Other Power [kW]: 45.8 Engine hours [h]: 94737 Weight [kg]: 6630 GR - EUROMAP
- Cover Sealing Lid MWM 12325921 - Suitable for several motors - Please note! Price per piece! - 12325921 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating ...
- Air guidance air duct MWM 12136627 - Suitable for several motors - Please note! Price per piece! - References -> 12131031 – 12136628 – 12306646 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new pro ...
Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...
Size: 80cm wide and 180cm high Price on request Contact details can be found under Contact
Kragarm regal, double-sided, 3.50m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 stands 1,750.-€ (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelf racks double-sided approx. 3.50m high, hot-dip galvanized IPE 160 / 80 with 2x3 adjustable each. Arms 1.20 m, 500kg load capacity per arm with dressings approx. 1.30 m Shelf stand on two sides approx. 3500mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load centre 600 mm 500 kg per arm / 2250kg per stand side with longitudinal and diagonal bandages e = 1300 mm, standard is 1.30m – so if they do not give any different information, we deliver the shelf with an axle distance of 1.30m. Other axle distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimen ...
Kragarm regal, double-sided, 4.16m height, 1.20m arms, 750kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 stands 1.995.-€ (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelf racks double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 100 with 2x3 adjustable each. Arms 1.20 m, 750kg load capacity per arm with dressings approx. 1.30 m Shelf stand on two sides approx. 4160mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load centre 600 mm 750kg per arm / 2250kg per stand side with longitudinal and diagonal bandages e = 1300 mm, standard is 1.30m – so if they do not give any different information, we deliver the shelf with an axle distance of 1.30m. Other axle distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimen ...
- Air guidance air duct MWM 12131039 - Suitable for several motors - Please note! Price per piece! - References -> 12131070 – 12350043 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By cons ...
Kragarm regal, double-sided, 4.16m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 stands 1,850.-€ (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelf racks double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 adjustable each. Arms 1.20 m, 500kg load capacity per arm with dressings approx. 1.30 m Shelf stand on two sides approx. 4160mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at load centre 600 mm 500 kg per arm / 2250kg per stand side with longitudinal and diagonal bandages e = 1300 mm, standard is 1.30m – so if they do not give any different information, we deliver the shelf with an axle distance of 1.30m. Other axle distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimen ...
- Cover Lid MWM 12141950 - Suitable for several motors - Please note! Price per piece! - References -> 12141951 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integr ...
maximum number of results exceeded
please refine your search
