mak 20 used for sale

\" Jenoptik Hommel-Etamic W10 Roughness Meter Set with LV17 Feed Unit Portable Roughness Meter Hommel-Etamic W10 Set from Jenoptik IM Germany GmbH.The device is designed for mobile tactile roughness measurement and has an integrated printer for direct report output. The measured values (e.g. Ra, Rz, Rmax) are clearly displayed on the colour display. Scope of delivery according to pictures and type plates: • Hommel-Etamic W10 evaluation unit item no. 10065263 S/N 135539 year of construction 2016 • Feed unit LV17 item no. 10057645V02 S/N 136720 • Original transport case • Power supply • Connection cable • Operating instructions • Accessories according to case insert • Several thermal paper rolls for integrated printer Condition: used, visually with slight signs of wear. Equipment was in use. Sale is made as shown. Manufacturer: Jenoptik IM Germany GmbH Device type: Homm ...

Roughness Gauge / Surface Gauge Manufacturer: Hommelwerke (Hommel-Etamic / Jenoptik) Type / Model: T 2000 Machine Type: Roughness Gauge / Surface Gauge Condition: used, decommissioned, unchecked / defective Year of manufacture: not known Serial number: 506680 Country of manufacture: Germany Equipment / scope of delivery • Roughness gauge Hommelwerke T 2000 • Measuring column LV-50 • Stylus TKL 300/17 • Stylus with magnetic adapter TKU • Control unit MSC-1 • Machine table with integrated granite measuring plate • PC unit with monitor • Connection cable and visible accessories Condition / Notes • The system has been shut down. • A functional test has not been carried out, the overall technical condition is unknown. • The evaluation unit has a display, but it remains black, there is no display. → It can therefore be assumed that the display unit is defective. •  ...

Article: Guillotine shears / sheet metal shears (manual) Manufacturer: Metallkraft Type / Model: BSS 1020 Equipment / Execution:     •    Solid industrial guillotine shears     •    Hand lever drive     •    Back gauge with scale     •    Hold-down device     •    Stable base (standing machine)     •    Table with scale Condition: Used.     •    Working width / cutting length: 1,020 mm     •    Max. sheet thickness: 1.5 mm (steel)     •    Year of construction: 2008     •     ...

\" Magnetic measuring stand with dial gauge Manufacturer dial gauge: Mitutoyo dial gauge type: Analogue, 0.01 mm resolution (No. 2046S, shock proof) Tripod: Magnetic measuring stand with on/off switching Design: Articulated arm with fine adjustment Magnetic base: Switchable (ON/OFF) Magnetic measuring stand with mounted Mitutoyo dial gauge. The tripod has a switchable magnetic base with good adhesive force and an articulated arm with fine adjustment for precise positioning of the dial gauge. Condition: Used. Visually good condition with normal signs of wear. Magnet shifts cleanly, joints can be fixed. Dial gauge runs smoothly, scale easy to read. Scope of delivery: • Magnetic measuring stand with switchable magnetic base • Mitutoyo dial gauge 0.01 mm \" Auction-ID: A7-46417-129

\" Pillar slewing crane 500 kg with electric chain LIFTKET – radius 4,000 mm • Manufacturer Mechanik Taucha Fördertechnik GmbH • Type / model GSX 500-3.5/3.25 Pillar slewing crane make Mechanik Taucha, year of construction 2001.Equipment : • Load capacity 500 kg • Radius 4,000 mm • Electric chain make LIFTKET • Electric drive (electric feed of the trolley) • Two-stage hoist with fine stroke • Suspension switch • Column mounting • Nameplate available Dimensions: • H1 (total height): 3,500 mm • H2 (hook height): 2,750 mm • A (radius): 4,000 mm Condition: Used, dismantled during operation. Usual age-related signs of wear. Lifting capacity: 500 kg Year: 2001 Type: GSX 500-3.5/3.25 Hoist: electric, 2-stage with fine lift Chassis: electrically movable Swivel range: column-guided Manufacturer's hoist: LIFTKET\" Auction-ID: A7-46417-372

-Flexible CNC plate machining center -The machine consists of two processing units (top, bottom) -Equipped with a total of 82 individually retrievable tools -The skipper is able to process two workpieces at the same time from above and below -Dimensions according to data sheet -Work and pressure table -Side work tables -Stop system -Electronic control of workpiece thickness -Digital drives -Central lubrication -Control -Automatic discharge with belt -Air cushion table -Bottom processing unit-Left slot -Upper processing unit-Left slot -Bottom processing unit-Right slot -Upper processing unit-Right slot -Horizontal glue dowel insertion unit for dowels with 8 mm diameter -Surveying system - NC-HOPS programming system -Version with left-hand automatic feed feed -Horizontal drilling and milling Auction-ID: A7-46409-13

Brand: Nabertherm Type: N 41/H Control: P300 Electrically heated chamber furnace from Nabertherm with base. The furnace is suitable for heat treatment processes such as hardening, annealing or sintering. It is operated via the integrated P300 controller. Sale including documented accessories according to the scope of delivery. Condition: • Used • Normal signs of wear due to age and use• Refractory lining with visible signs of use• Control and display available Scope of delivery: • Chamber furnace Nabertherm N 41/H • Underframe • Control P300 • Documentation (operating documents) • Accessories as shown • Delivery as shown • Manufacturer: Nabertherm • Model: N 41/H • Year of construction: 2010 • Max. temperature: 1280 °C • Connection: 400 V / 3-phase / N / PE • Frequency: 50/60 Hz • Connected load: 15.0 kW • Control: P300 • Degree of protection: IP  ...

Starthole Drilling Machine / Super Drill EDM Starthole Drilling Machine (EDM) for the production of starting and through holes in hard materials, e.g. for die-sinking EDM or wire EDM. Manufacturer: CASTEK Mechatron Ind. Co., Ltd.Model: HK-24 Year: 02 / 2002 Serial No.: 9024080 Equipment: Cross table (manual) Digital control and operating unit Protective cover / splash guard Cooling/flushing device Emergency stop operating instructions available (provisional manual HK-24) Accessories / scope of delivery: Electrode material (brass tubes, mixed, as shown) Various clamping and small parts Tool cabinet with Drawers incl. contents. Condition: Used Normal signs of wear due to age and use Machine comes from ongoing workshop operation. Connection: 400 V / 3-phase (3 PE) Power consumption: 4.5 kVA Compressed air requirement: approx. 25 l/min Operating pressure: 4–8 kg/cm² Electrical control:  ...

\" Column-mounted slewing crane 2,000 kg with electric chain hoist – electric movement – 2 speeds For sale is a column-mounted slewing crane from Mechanik Taucha Fördertechnik GmbH, equipped with an electric chain hoist (LIFTKET). The system is designed for a load capacity of 2,000 kg and is suitable for use in workshops, production or warehouses. The movement of the hoist and boom is electric, all movements can be carried out in 2 speeds (fine/high gear). Condition: • Used, functional • Normal signs of wear present Scope of delivery: • Column slewing crane complete • Electric chain hoist with control • Manufacturer crane: Mechanik Taucha Fördertechnik GmbH • Type: ZSL 2000-4/4 • Year of construction: 2001 • Load capacity: 2,000 kg • Factory No.: 501 30171 • Lifting system: Electric chain hoist LIFTKET • Method: electric (hoist and boom) • Speeds: 2-stage ...

\" Jenoptik HOMMEL TESTER W55 roughness measuring station with Waveline WLI-20, 2x HS 300 height measuring stand, hard rock plate and accessory package Stationary roughness measuring station from Hommel-Etamic / Jenoptik from first delivery 2013 (see delivery note). The measuring station consists of a solid hard rock plate with groove (item no. 257056V01) as a low-vibration base and two HS 300 height measuring stands. One HS 300 is mounted on the granite slab, the second HS 300 stands separately behind it and is included in the scope of delivery. Components according to type plates and delivery note: • HOMMEL TESTER W55 Item No. 10010488 S/N 87302 Year of construction 2011 12 VDC / 3.5 A • Waveline WLI-20 in case Item No. 244280 Year of construction 2013 • Height measuring stand HS 300 Item no. 10047611 • Swivel mount for HS 300 Item no. 10051140 • Column for height stand HS 3 ...

\" Electric chain hoist 125 / 250 kg Manufacturer / Model: LIFTKET – Hoffmann Fördertechnik GmbH Wurzen Type: KLORW 63GV8-2 Condition: Used, functional Electric chain hoist LIFTKET from German production. The chain hoist is equipped with a control bottle and has fine travel. The sale is without a crane system, only the chain hoist is offered. • Load capacity: 125 / 250 kg • Hook height: approx. 2.65 m • Manufacturer: Hoffmann Fördertechnik GmbH Wurzen (LIFTKET) • Type: KLORW 63GV8-2 • Year of construction: 2010 • Power connection: 400 V / 3 phases • Control: pendant switch • Lifting speed: with fine stroke \" Auction-ID: A7-46417-377

200-liter steel barrel from the manufacturer ADDINOL. The contents correspond to the keg marking: Product: ADDINOL XG 68 (according to the original label) Fill level: approx. 80 % Barrel type: 1A1/X/250/21 – UN-approved steel keg Auction-ID: A7-46417-3

\" Column-mounted slewing crane 1,000 kg – electric movement – 2 speeds – LIFTKET 2021 Column-mounted slewing crane from Mechanik Taucha Fördertechnik GmbH, equipped with a LIFTKET electric chain hoist (year of construction 03/2021). The crane is designed for a load capacity of 1,000 kg and has an electric movement of the hoist. All movements can be performed in 2 speeds (fine and high). Equipment: • Electric chassis (motorized) • 2 speeds (lifting/lowering) • Modern LIFTKET chain hoist (relatively new) • Stable column design Condition: • Used • Functional • Normal signs of wear • Manufacturer: Mechanik Taucha Fördertechnik GmbH • Type: GSX 1000-4.5/3.04 • Year of construction: 2001 • Load capacity: 1,000 kg • Factory No.: 501 311/3 • Hoist: LIFTKET electric chain hoist • Year of construction Hoist: 03/2021 • Process: electric (hoist) • Speeds:  ...

\" Conventional lead and tension spindle lathe – turning length approx. 1,200 mm – Ø 475 mm Chuck lead and tension spindle lathe made by Boehringer Bros. (VDF), industrial version. Equipment: • 3-jaw chuck Ø 475 mm • Tailstock • Rotating center punch • Extensive accessories in the side cabinet (jaws, holders, inserts, etc.) • Coolant device • Controls on the support Turning length approx. 1,200 mm.Condition: Used machine with age-related signs of use. Visually appropriate to the age. Manufacturer: Gebr. Boehringer GmbH Type: Lead and pull spindle lathe Turning length: approx. 1,200 mm Chuck diameter: Ø 475 mm Spindle bore: approx. 80 mm • Dimensions in mm (LxWxH) approx. 3,450 x 1,300 x 1,700 mm \" Auction-ID: A7-46417-373

\" Digital crane scale / hanging scale, manufacturer KERN & Sohn GmbH, type HFM 3T0.5. Equipment / Design: – Digital crane scale / pull scale – Large LED display – HOLD function – Tare function – Robust industrial design – Top and bottom hooks with shackle – Battery operation (power supply available) – Manufacturer: KERN & Sohn GmbH – Type: HFM 3T0.5 – Max. load capacity: 3,000 kg (3 t) – Pitch: d = 0.5 kg – Supply: 12 V / 500 mA – Year of construction: 04/2015 – CE marking: available \" Auction-ID: A7-46417-145

Serial Number: 11092151 • Power: 1.9 kW • Condition: Used • Additional Notes: Machine not starting – mechanical condition . Runtime meter shows 23.7 hours (low usage). Fuel: Petrol (2-stroke mix). Version: 101 • Operating weight: 66 kg • Manufactured: 06/2019 • CE Certified. Compact soil compaction machine ideal for trench work and repair jobs. Auction-ID: A7-46408-6

Column-mounted slewing crane 800 kg with two electric chain hoists Manufacturer: Mechanik Taucha Fördertechnik GmbH Type: GSX-D 800-5+70-5/3,2 Year of construction: 2002 Factory no.: 2000327 Column-mounted slewing crane make Mechanik Taucha with a load capacity of 800 kg on the main boom. The system is equipped with two electric Demag chain hoists. The main lift is carried out by a Demag electric chain hoist with a payload of 800 kg. In addition, a second electric chain hoist with a load capacity of 70 kg is mounted for smaller components. The chain hoists move back and forth electrically on the respective outriggers (trolley ride). The crane is moved manually. Operation via pendant button control. Power supply via trailing cable system with mains connection switch. A test book for the crane system is available. System consisting of a column, two outriggers and two electric chain h ...

\" Workbench with drawers – approx. 2000 x 700 x 820 mm Workbench in heavy design with robust worktop and integrated drawers. The workbench is ideal for workshop, assembly or production. Equipment: • sturdy, heavy version • several drawers with storage space • large work surface • industrial construction Condition: • Used • Dimensions: approx. 2000 x 700 x 820 mm • Type: steel construction • Worktop: wood (heavily used, but functional) • Drawers: several (integrated on the side)\" Auction-ID: A7-46417-408

Axel cofiguration: 4x4; Mileage: 580 000 km; Auction-ID: A7-46408-20

VOLVO FM 420 – Tipper Truck General data: Manufacturer: Volvo Model: FM 420 Year of manufacture: 2003 Engine: Diesel, 12,130 cm³ Power: 309 kW (420 HP) Transmission: Manual Drive: 6x4 Number of axles: 3 Color: White Weights: Gross vehicle weight: 33,000 kg Unladen weight: 12,250 kg Payload: approx. 20,750 kg Condition: Well maintained and regularly serviced Very good mechanical condition Ready for immediate use Description: Volvo FM 420 tipper truck in excellent working condition, suitable for construction and heavy-duty transport applications. The vehicle has been regularly maintained and requires no additional investment, making it ready for immediate deployment on site. Auction-ID: A7-46408-9

Column-mounted slewing crane 100 kg with electric chain hoist Manufacturer: Meier-Rädsch GmbH Type: SDK / GK / 100 Year of construction: 2003 Factory no.: 2003 / GK / 02 Column-mounted slewing crane make Meier-Rädsch with a load capacity of 100 kg. The crane was used for loading and unloading CNC machining centers and is particularly suitable for smaller workpieces, clamping devices or tools. The system is equipped with an ABUS electric chain hoist. The stroke is carried out electrically via the electric chain hoist. The movement of the trolley on the boom is manual (forward/backward). The crane is moved manually. Operation via pendant switch control with emergency stop. A crane inspection book in accordance with DGUV is available. System consisting of column, boom and electric chain hoist. Column-mounted slewing crane , boom approx. 2.7 m , ABUS electric chain hoist, manual trolle ...

KEYENCE WM-3000 (Wide Area Coordinate Measuring Machine) mobile coordinate measuring machine. The system was delivered in November 2020 and is in well-maintained, functional condition. It is a complete measuring system including accessories, software and transport cases. Scope of Delivery • WM-3000 transducer • WM-P3000 Probe • WM-C3000 Control/Camera Module • WM-S1 camera tripod • 3x WM-B1 batteries • WM-BC1 charger • OP-99032 Power Cord • Laptop with WM measurement software installed • Transport case • Calibration certificate (09/2020) • Inspection Result Condition • Functional • Visually well-groomed • Calibration from 09/2020 (new factory calibration recommended) • Sale from ongoing operations The WM-3000 is an optically guided 3D coordinate measuring system for the large-volume measurement of components in the range of 300 mm to 3,000 mm. Measuremen ...

Operating hours: 11000 Engine power: 160 kW Total weight: 22,100 kg Auction-ID: A7-46408-1

Column-mounted slewing crane 100 kg with electric chain hoist Manufacturer: Meier-Rädsch GmbH Type: SDK / GK / 100 Year of construction: 2001 Factory no.: 2001/GK/01 Column-mounted slewing crane make Meier-Rädsch with a load capacity of 100 kg. The crane was used for loading and unloading CNC machining centers and is particularly suitable for smaller workpieces, clamping devices or tools. The system is equipped with an ABUS electric chain hoist. The stroke is carried out electrically via the electric chain hoist. The movement of the trolley on the boom is manual (forward/backward). The crane is moved manually. Operation via pendant switch control with emergency stop. A crane inspection book is available. System consisting of column, boom and electric chain hoist. Column-mounted slewing crane , boom approx. 2.45 m , ABUS electric chain hoist, manual trolley travel , manual swivel mo ...

\" Digital Rockwell hardness tester Ernst AT130 DR Manufacturer: Ernst Type / Model: AT130 DR Year of manufacture: 2007 Serial number: 7883 Version: digital Power supply: 230 V / 50–60 Hz Power consumption: 15 W CE marking: available Condition • Used, out of operation • Function given when removed • Usual signs of wear according to age • Calibration sticker available (05/2023) Scope of delivery • Hardness tester Ernst AT130 DR • Extensive accessory package, including: • Test benches / supports • Indenters / test stamps • Reference / comparison bodies • Wooden boxes with inserts • Cover • Test method: Rockwell • Test loads: 60 kp / 100 kp / 150 kp (switchable) • Supported Rockwell scales: HRA, HRB, HRC, HRD, HRF, HRG, HRH (depending on test specimen / indenter) • Indenter / Penetrators: 120° diamond and ball penetrators (various diameters, see accessories ...

\" Gauge block set / Parallel gauge blocks – Long end gauge (used) Manufacturer: Längenmesstechnik GmbH Limbach Standard: DIN EN ISO 3650 Tolerance class: Class 2 All gauge blocks with through-holes, design as precision parallel gauge blocks. Condition • Used • Measuring surfaces visually good, with slight traces of use • Wooden cases with signs of wear and tear 4 individual longitudinal dimensions: 1. 200 mm – ID 3064 2. 250 mm – ID 3065 3. 300 mm – ID 3066 4. 400 mm – packed separately \" Auction-ID: A7-46417-205

Airconditioning: yes; Tail lifting platform: yes; Auction-ID: A7-46408-21

\" Werth CNC coordinate measuring machine OPTIMUS 300 (3-axis motorized) Werth OPTIMUS 300 optical CNC coordinate measuring machine with motorized axes X, Y and Z. Year of construction 2010. System with video image processing for optical contour recognition and motorized positioning. Version with control panel, PC system, monitor and installed measurement software. Test report dated 15.10.2024 is available. Device ready for operation from measurement room environment. • Manufacturer: Werth Messtechnik GmbH • Type: OPTIMUS 300 • Version: BAS. INSTR. 300 Z-MOT • Year: 2010 • Serial number: 10-00454 • Axes: X / Y / Z motorized • Measuring range X: 0 – 400 mm • Measuring range Y: 0 – 200 mm • Measuring range Z: motorized (working focus) • MPEE: 2.5 μm + L/40 • Sensor system: Werth probe ZTMC-2/2 V4.10 • Measurement software: Version 7.31.083 • MC control: 7.2 ...

Incremental precision measurement and displacement measurement system for precise recording of small travels. The Steinmeyer/FMS IKF 10 measuring head works incrementally and is suitable for comparative and relative measurements. The measured value is displayed via the external display unit PU 11 with digital display and switchable units (mm/inch/degree). The stable mechanical design with solid base plate, rotary table and fine adjustments allows it to be used as a stationary test or measuring station, e.g. in quality assurance, production control or development. Scope of delivery:     •    Incremental precision probe / measuring head IKF 10     •    Display unit PU 11 incl. connection cable     •    Measuring stand with base plate     •&nbs ...

few operating hours laboratory machine - Producer Büftering - Type SWT 325 QH - Year of construction 2015 - 1. Unit - Cross belt - Electronic sanding beam EPS - Fins belt - Sanding belt speed infinitely adjustable - 2. Unit - Length belt - Electronic sanding beam EPS - Sanding belt speed infinitely adjustable - 3. Unit - Brush sanding head Aderlohn 650mm / Messing 650mm - Operating side, left - Electric height adjustment - Feed speed infinitely adjustable - Vacuum transport belt - Air speed main collector 5500 m³/h, 20 m/s - Consumption of compressed air 80 - 108 m³/h - Weight 4.000 kg - Standort, nicht am Lager - Switch cabinet built into the machine - Total connection power 91A / 48 kW - Voltage / HZ 400/50

- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1.300 mm - Working height ~ 900 + - 20 mm - Max. part height ~ 100 mm - Cooling dryer 2.000 mm - Roller transportsystem - Roller diameter 60 mm - Roller pitch 100 mm - Length conveyor 3.000 mm - Length 3.000 mm - Colour 7035 - Location, in stock - Voltage fluctuation max. +/- 5 % - Without switch cabinet

without pallets Auction-ID: A7-46300-50

KNOLL coolant system and chip conveyor, toolchanger positions: 160, max. speed rotary table (B-axis): 40 rpm, max. tool weight: 12 kg Auction-ID: A7-46300-40

Manufacturer: KONECRANES Model / Type: RTG 8W Year of manufacture: 2007 Title: Heavy-duty container RTG crane Technical Specifications: - Load capacity: 40,600 kg - Lifting height: 15,240 mm (4 + 1 stacking height) - Operating hours: 83,311 - Total mass: 122 tons - Power unit drive: Volvo Penta TAD 1355 GE – 355 kW - Generator: Stamford 360 kVA - Power transmission: Electric Drive Motors: - Gantry travel: KCI – 25 kW - Hoisting: KCI – 110 kW - Trolley travel: KCI – 11 kW Performance: - Gantry travel speed: 120 m/min - Trolley travel speed: 63 m/min - Hoisting/lowering speed (no load): 52 m/min - Hoisting/lowering speed (with load): 26 m/min Status / Condition: In normal working condition. Auction-ID: A7-45668-5

Manufacturer: KONECRANES Model / Type: RTG 8W Year of manufacture: 2008 Title: Heavy-duty container RTG crane Technical Specifications: - Load capacity: 40,600 kg - Lifting height: 15,240 mm (4 + 1 stacking height) - Operating hours: 78,469 - Total mass: 122 tons - Power unit drive: VOLVO PENTA TAD1344 GE – 354 kW - Generator: Stamford 360 kVA - Power transmission: Electric Drive Motors: - Gantry travel: KCI – 25 kW - Hoisting: KCI – 110 kW - Trolley travel: KCI – 11 kW Performance: - Gantry travel speed: 120 m/min - Trolley travel speed: 63 m/min - Hoisting/lowering speed (no load): 52 m/min - Hoisting/lowering speed (with load): 26 m/min Status / Condition: In normal working condition. Auction-ID: A7-45668-6

Manufacturer: KONECRANES Model / Type: RTG 8W Year of manufacture: 2006 Title: Heavy-duty container RTG crane Technical Specifications: - Load capacity: 40,600 kg - Lifting height: 15,240 mm (4 + 1 stacking height) - Operating hours: 85,147 - Total mass: 122 tons - Power unit drive: Volvo Penta TAD1344-45 GE-B – 354 kW - Generator: Stamford 360 kVA - Power transmission: Electric Drive Motors: - Gantry travel: KCI – 25 kW - Hoisting: KCI – 110 kW - Trolley travel: KCI – 11 kW Performance: - Gantry travel speed: 120 m/min - Trolley travel speed: 63 m/min - Hoisting/lowering speed (no load): 52 m/min - Hoisting/lowering speed (with load): 26 m/min Status / Condition: In normal working condition. Auction-ID: A7-45668-3

Manufacturer: KONECRANES Model / Type: RTG 8W Year of manufacture: 2008 Title: Heavy-duty container RTG crane Technical Specifications: - Load capacity: 40,600 kg - Lifting height: 15,240 mm (4 + 1 stacking height) - Operating hours: 75,047 - Total mass: 122 tons - Power unit drive: VOLVO PENTA TAD1344 GE – 354 kW - Generator: Stamford 360 kVA - Power transmission: Electric Drive Motors: - Gantry travel: KCI – 25 kW - Hoisting: KCI – 110 kW - Trolley travel: KCI – 11 kW Performance: - Gantry travel speed: 120 m/min - Trolley travel speed: 63 m/min - Hoisting/lowering speed (no load): 52 m/min - Hoisting/lowering speed (with load): 26 m/min Status / Condition: In normal working condition. Auction-ID: A7-45668-7

Manufacturer: KONECRANES Model / Type: RTG 8W Year of manufacture: 2004 Title: Heavy-duty container RTG crane Technical Specifications: - Load capacity: 40,600 kg - Lifting height: 15,240 mm (4 + 1 stacking height) - Operating hours: 85,861 - Total mass: 122 tons - Power unit drive: VOLVO PENTA TAD1344 GE – 354 kW - Generator: Stamford 360 kVA - Power transmission: Electric Drive Motors: - Gantry travel: KCI – 25 kW - Hoisting: KCI – 110 kW - Trolley travel: KCI – 11 kW Performance: - Gantry travel speed: 120 m/min - Trolley travel speed: 63 m/min - Hoisting/lowering speed (no load): 52 m/min - Hoisting/lowering speed (with load): 26 m/min Status / Condition: Unit is incomplete; missing the GPS Golden Box”, frequency converter, lifting fittings, and the gantry C gearbox (shaft only). Auction-ID: A7-45668-2

KNOLL cooling system and chip conveyor, toolchanger positions: 408, rapid traverse (X/Y/Z): 90 m/min., max. tool length: 350 mm, max. tool diameter: 160 mm, max. tool weight: 12 kg, max. workpiece diameter: 720 mm, max. workpiece height: 850 mm Auction-ID: A7-46300-1

KNOLL coolant system and chip conveyor, toolchanger positions: 372, feed rate range (X/Y/Z): 1 – 60,000 mm/min, max. speed rotary table (B-axis): 40 rpm, max. tool weight: 12 kg Auction-ID: A7-46300-13

Manufacturer: KONECRANES Model / Type: RTG 8W Year of manufacture: 2007 Title: Heavy-duty container RTG crane Technical Specifications: - Load capacity: 40,600 kg - Lifting height: 15,240 mm (4 + 1 stacking height) - Operating hours: 92,738 - Total mass: 122 tons - Power unit drive: Volvo Penta TAD 1355 GE – 355 kW - Generator: Stamford 360 kVA - Power transmission: Electric Drive Motors: - Gantry travel: KCI – 25 kW - Hoisting: KCI – 110 kW - Trolley travel: KCI – 11 kW Performance: - Gantry travel speed: 120 m/min - Trolley travel speed: 63 m/min - Hoisting/lowering speed (no load): 52 m/min - Hoisting/lowering speed (with load): 26 m/min Status / Condition: In normal working condition. Auction-ID: A7-45668-4

Manufacturer: KONECRANES Model / Type: SMV6/7ECC90 Year of manufacture: 2015 Condition: In normal working condition Specifications: - Operating hours: 35,855 h - Total machine weight: 36,300 kg - Capacity under spreader: 9,000 kg - Lifting height under spreader: 19,005 mm - Max. boom height (lowered / raised): 10,430 mm / 19,245 mm - Telescopic boom tilt (F/R): 2° / 4° Engine & Drivetrain: - Engine: VOLVO PENTA TAD 871VE – 185 kW @ 2200 rpm - Gearbox: ZF 4WG 191 - Drive axle: Kessler D81 P488-NLB6340 Dimensions & Structure: - Overall length: 6,600 mm - Cab height: 3,900 mm - Wheelbase: 4,500 mm - Turning radius (40’): 8,425 mm Axle loads: - Front axle: 23,600 kg - Rear axle: 12,700 kg Auction-ID: A7-45668-10

Manufacturer: KONECRANES Model / Type: SMV6/7ECC90 Year of manufacture: 2015 Condition: In normal working condition Specifications: - Operating hours: 36,331 h - Total machine weight: 36,300 kg - Capacity under spreader: 9,000 kg - Lifting height under spreader: 19,005 mm - Max. boom height (lowered / raised): 10,430 mm / 19,245 mm - Telescopic boom tilt (F/R): 2° / 4° Engine & Drivetrain: - Engine: VOLVO PENTA TAD 871VE – 185 kW @ 2200 rpm - Gearbox: ZF 4WG 191 - Drive axle: Kessler D81 P488-NLB6340 Dimensions & Structure: - Overall length: 6,600 mm - Cab height: 3,900 mm - Wheelbase: 4,500 mm - Turning radius (40’): 8,425 mm Axle loads: - Front axle: 23,600 kg - Rear axle: 12,700 kg Auction-ID: A7-45668-9

KNOLL coolant system and chip conveyor, toolchanger positions: 160, max. speed rotary table (B-axis): 40 rpm, max. tool weight: 12 kg Auction-ID: A7-46300-75

KNOLL coolant system and chip conveyor, toolchanger positions: 240, rapid traverse (X/Y/Z): 60 m/min., max. tool length: 350 mm, max. tool diameter: 160 mm, max. tool weight: 12 kg, max. workpiece diameter: 720 mm, max. workpiece height: 1000 mm Auction-ID: A7-46300-10

toolchanger positions: 51 Auction-ID: A7-46300-80

Laptop LENOVO E14 20RA001MGE Intel i5-10210U 16 GB RAM 480 GB NVMe SSD, S/N PF2BRTWC, without software

Laptop LENOVO E14 Gen2 20TA00F7GE Intel i5-1135G7 16GB RAM 480GB NVMe SSD, S/N PF3E9EJY, no power supply, no software, internal NBSBG038

\"Motorola and Geonaute walkie-talkies, 11 pieces Set of 11 radio transceivers with necessary charging accessories + carrying cases. They are tested and functional. Everything is sold as a package.\" Auction-ID: A7-46488-7

Working length 2000 mm Working width 360 mm Roll width 360 mm Roll diameter 60 mm Load capacity 800 kg Height adjustment 650 - 950 mm Machine weight approx. 0.045 t Dimensions L x W x H 2.07 x 0.48 x 0.21 m Condition: never used / new (5) Auction-ID: A7-46460-505