129,248 used machines on RESALE, but how to find them? Machine Search
FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser ...
Wolfking” mixer-grinder Type TSMIG 1250/200 twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid suitable for cooling with N2 or Co2
RECON Part number: 1231-6565 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
RECON Part number: 1230 1172 ---------------------------------------------------------------------- ---------- Note: We have various other RECON parts from different manufacturers and types available. We like to send you our current store reserves. For further questions we are gladly available!
PTC Torpedo Hot Water 140°C and Steam 140°C/32bar Skid similar but no Dynajet, Oertzen, Falch, DIBO, ... - Skid on hot-dip galvanized frames with forklift tabs. The following hot water models are available: Torpedo 21/200 | 21l/min. at 200bar | Engine: Kohler KDW 702 12.6kW Torpedo 23/250 | 23l/min. at 250bar | Engine: Kohler KDW 1003 19kW Torpedo 23/350 | 23l/min. at 350bar | Engine: Kohler KDW 1404 26kW Torpedo 20/500 | 20l/min. at 500bar | Engine: Kohler KDW 1404 26kW Torpedo 30/500 | 30l/min. at 500bar | Engine: Kohler KDW 2204 37.5kW - Dimensions with 680l water tank: 2,300 x 1,310 x 1,310 - Dimensions with 1000l water tank: 2,300 x 1,310 x 1,630 Bhgo2w7wfd - Empty weight: approx. 600 kg - High pressure pump: Comet RW/TW Premium - HD reel: manual or automatic with max. 1/2" or 50 m. 3/8" hose (included) - Water supply reel: manually with 50 m. 3/4" hose - Dies ...
RECON Part number: 1230 1173 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Waelz piston pump (rootsblowesis) Manufacturer: Pfeiffer Type: WKP 2000 A Suction suction systems: approx. 2065 m3/h engine: 5.5 KW Cat. Nr.: PP W61 000 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, user manual; ready to use
Waelzpistongeblaese Manufacturer: Leybold Type: RUVAC WSU 2001 Cat No.: 11741 Suction moulds: approx. 2000m3/h Status: Generalueberholt Gewastperformance: 12 months (similar); ready for use
PTC CTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only for versions 250 and 350 bar) Trailer similar but no dynajet, oertzen, falch, DIBO, - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following hot water models are available: CTR-H 16/250 | 16l/min. at 250bar | Engine: Kohler KDW702 12.6kW CTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW702 12.6kW CTR-H 20/350 | 20l/min. at 350bar | Engine: Kohler KDW1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 400 kg - High pressure pump: Comet RW/TW Premium with integrated gearbox Bhdwmzmvai - HD reel: manually with max. 1/2" or 80 m. 3/8" hose (included) - Water supply reel: manually with 35 m. 3/4" hose - Wate ...
PTC JTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only with version 350 bar) Trailer similar but no Dynajet, Oertzen, Falch, DIBO, ... - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following hot water models are available: JTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW 702 12.6kW JTR-H 23/350 | 23l/min. at 350bar | Engine: Kohler KDW 1404 26kW JTR-H 20/500 | 20l/min. at 500bar | Engine: Kohler KDW 1404 26kW JTR-H 30/500 | 30l/min. at 500bar | Engine: Kohler KDW 2204 37.5kW - Dimensions: 3,370 x 1,640 x 1,540 Cxombmv - Empty weight: approx. 650 kg - High pressure pump: Comet RW/TW Premium - HD reel: manually with max. 1/2" or 100 m. 3/8" hose (included) - Water supply ree ...
conventional haertepruefer for the Processes Rockwell C , B , A Analog measuring watch, manual operation, weight load system Standard compliant according to ISO6506 Performance 2 years At the price, no used hardness tester is worthwhile. Better to spend a little more, but with a guarantee. More info schuetz-licht.de/produkte/haertepruefer/haertepruefgeraete-rockwell/ha ertepruefgeraet/
High pressure cleaner PTC Easypower L B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 200-700 bar - Foerder quantity: 13-42 l/min. - Engine: Kohler Stage V Diesel 35hp/26kW, 3400 rpm - Dimensions: 1,370 x 850 x 1,020 mm - Empty weight: approx. 260 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with 4 pieces of industrial wheels 350mm - Electric starter - Operating hour counter - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet dues 15° The following models are available: Easy Power L D 16/500 | 16 l/min. 500 bar Easy Power L D 23/350 | 23 l/min. 350 bar Easy Power L D 20/400 | 20 l/min. 400 bar Easy Power L D 30/280 | 30 l/m ...
4 used LTG KENYA dust and fiber separators and compactors, year 1995, each composed composed of: centrifugal fan (radial blades) dust suction ventilator, motor with 11 kW power, blade diameter 800 mm cyclone centrifugal dust separator (Vortex) type ZSC 200, for air volume up to 2000 m3/h LTG compacting power screw (CPS), screw diameter 110 mm, motor with 0,75 kW power dust quantity up to 100 Kg/h
Omam second hand line width 2000 mm for PP corrugated sheet extrusion Plastic • Omam extruder diameter 150 mm / 30 D • Main Extruder motor: Siemens DC motor 410 kW • 2-ways continuous filter change FCF 120-2V complete with hydraulic power unit • Melt pump Alfatech AT80 with motor and control panel • Omipa T-Die 2180 mm wide with thickness 5mm and pitch 5,9 mm • Nr.02 T-Dies 3mm thick / 4mm pitch • Caliber with anodized aluminum plates, complete with 5,5 Kw air blades and 3 vacuum pumps 1,1 Kw (x1), 2,2 Kw (x2) • Take-off roller – equipped with 8 rolls, 330 mm diameter, rubber coated, 5 Kw motor • Oven: 2500 mm wide, power 48 kw, infrared, with control unit • Ferrarini & Benelli Corona treatment complete with GTS8 15Khz generator and 2 fans for ozone extraction (0,25hp) • Cooling unit with 6 fans • Take off rollers - 4 rolls, 330mm diameter, rubber coated, 5 Kw ...
diameter 200mm, little used, dusted, good condition.4 Bolts with bolt spacing approx. 94mm, Hole circle diameter of the bolts approx. 133mm, the largest diameter of the short cone approx. 106mm, Drawbar in the middle. All information to the best of our knowledge but without any information. Special price
Built in: 1989 Size: max 1.700 x 1.300 mm lifting capacity: max 2.000 kg Stroke height: 1.000 mm ; working condition
Max bending length: 1020 mm Max. sheet metal rod: 2 mm steel motor upper cheek adjustment via foot switch manual rear stop diverse bending rails
Punching and forming center in chain with an assembly line for the production of relays, see pictures
Fan Polytechnik L 200 Connection of 200 mm H x W x D: 650/1150 x 960 x 700 mm Built in 1982 Weight approx. 150 kg Masch. No. 82261 Speed 1400 rpm Leistutng 3410 m3 / h Engine 4 kW Pressing 238 mm / WS The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Hydraulic unit 360 l, 2 x 11 kW, 2 memory More: Hydro-aggregate REXROTH DB 250-04-0, 1 memory, various valves Hydro-aggregator REXROTH, 60 l tank, various valves (see pictures)
various knife head fraesers / plan fraesers 200, 215 250 mm
This rotary valve was used, was only used for spare parts storage for a foreign project and was therefore never in use. The rotary conveyor thus has no operating hours and is in a new condition. The rotary valve, with square inlet, is suitable for the controlled supply and dosing of powdered and granulated bulk materials from silos, funnels, pneumatic conveyor systems, filter systems and cyclones. Name: Rotary valve Manufacturer: Sunds MDF Type: LAF-200 Year of construction: 2010 Material: Normal steel Drive motor: 11 kW Dimensions: L 3400 x W 2200 x H 2370 mm Empty weight: approx. 4500 kg Speed: 1475 / 22 Condition: Used Tech. Documentation: No Note: Inlet L: 1980 mm x W: 1180 mm, Outlet L: 2180 mm X W: 1000 mm, 7 chambers. The rotary valve has no operating hours and is in a new condition. Price: On request
Industrial washing machine for small parts Turbex Binitron 2000, machine no. 94252, 400V 50Hz 25A, see also pictures
MWM TCG 2016 V 12 Exchange unit with complete motor and generator overhauled on basic frame Payment by invoice warranty Bücker & Essing GmbH assumes the warranty exclusively for the delivery volumes supplied by it. A warranty for damages that are not directly related to the delivered and performed thing, as well as a warranty for consequential damages, are expressly not assumed. The warranty is assumed for a further 12 months at the most or until 8000 operating hours have been reached after commissioning, whichever of the two cases occurs first. Regardless of the commissioning date, the maximum warranty period is 15 months after delivery. The warranty case must be notified immediately in writing. Warranty claims can only be asserted if the commissioning and maintenance have been carried out and documented in accordance with the manufacturer's regulations. Commissioni ...
Simonazzi Tribblock 100-100 15 100 spray heads, 100 filling valves and 15 capping heads. Performance: 0.5 lt / 32,000 FL/h 1. 0lt / 29,000 FL/h 1.5 lt / 22,000 FL/h 2,0 lt / 18,000 FL/h Machine in very good maintained condition
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 6 total power requirement: 7,5 kW weight of the machine ca.: 4,340 t dimensions of the machine ca.: 3830 x 1160 x 1180mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Autoclave/Hardening boiler Manufacturer: Scholz & Co. Year of construction: 1996 Working pressure: 16 bar Working temperature: 203° C Volume: 101.800 liters Diameter: 2,000 m Length: 26 m Charging medium: saturated steam Quantity: 9 pieces (all identical) The autoclaves could be inspected at every time! In very good condition!
Doppelschleifbock Manufacturer: FAMO Type: G-200 A Diameter of grinding wheel: 200 mm 0,75 kW 2800 RPM All information without guarantee
Working width: 4000 mm Working height: 2600 mm Number of cylinders: 6 St. weight: 2000 kg Dimensions (L/W/H): 5550x1300x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
swing diameter: 200 mm centre height: 300 mm weight of the machine ca.: 75 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 3500 mm Working height: 2300 mm Number of cylinders: 4 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of sanding units: 2 St sanding width: 190 mm Sanding height max.: 2 - 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
