mahr 40 used for sale

Mustang al 406 ; high low gearing ; joystick control; 4 extra functions at the front; Yanmar 4 cylinder diesel engine 46hp ; shovel leaves because of renewal larger; Auction-ID: A1-40137-78

Package of 40 pieces of Rhombus Oak rebate parts, including 6 bags of mounting brackets + screws and 8 pieces of start/end profiles; Unused in packaging. Length: 290 centimeters Width: 16.2 centimeters Working width: 15.2 centimeters Auction-ID: A1-40111-354

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43752-98

Roller motor with electronics for sliding gate, unused in box incl accessories Auction-ID: A1-40418-426

Provided: 2 pieces. 1 short tail 40hp 2 stroke (complete and working) with remote control, 1 long tail 4stroke EFI (not complete, but with 3 pinion pieces and loose parts) operation not known year of manufacture 2006) Auction-ID: A1-42016-93

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43752-65

Roller motor with electronics for sliding gate, unused in box incl accessories Auction-ID: A1-40418-444

Loba Sanding Pads for Parquet Treatment 406 x 10mm Special Pad beige and Remnants Mixed Lot Auction-ID: A1-46501-2616

102 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 75.5 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40111-365

High-quality drawer system from Blum. 10 units in the high version (system height C, 177 mm) ideal for storage pull-outs, 1 unit in standard height M. All including carcass rails (40 kg, Blumotion). Perfect for high-end kitchen or shopfitting projects. Auction-ID: A1-46501-2589

Mobile LED Light 400lm / 73lm/Watt in original box Auction-ID: A1-46501-3073

Equipped with: With remote control, with power trim, Smartcraft (readable hours around 450 hours) on delivery, the buyer will receive a printout with these hours. Long tail 51cm. 40 hp four-stroke outboard engine with EFI injection, long tail (20\"), electric start/trim, approx. 102 kg and max. 6000 rpm. Auction-ID: A1-42016-92

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43752-58

speaker with bluetooth function and LED light cannon on battery Auction-ID: A1-40418-299

Electric windows and mirrors, mirror heating, digital tachograph, 6-speed manual, tow bar Auction-ID: A1-42016-291

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43752-92

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43752-93

Roller motor with electronics for sliding gate, unused in box incl accessories Auction-ID: A1-40418-425

Slide size 350x210 mm Slide stroke 80 mm Shots per minute 10-50 Max mould height 300 mm Worktop size 750x445 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-5

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43752-59

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43752-72

Equipped with Rated input voltage: 3P AC380V ±15% 50/60Hz; Rated duty cycle: 40%; Efficiency: 85%; Insulation class: F; Protection class: IP21; MIG: Rated input power: 13.8 kVA; Rated input current: 21A; Open circuit voltage 80V; Output current 40-350A; Output voltage 31.5V; TIG: Rated input power: 10.5 kVA; Rated input current: 16A; Open circuit voltage 80V; Output current 10-350A ; Output voltage 24V: MMA: Rated input power: 11.8 kVA; Rated input current: 18A; Open circuit voltage 80V; Output current 30-300A; Output voltage 32V; Power current 0-99A; Ignition current 0-99A; including all accessories; Unused in box

3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 320mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake Removable chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Dimensions approx. 1.9 x 0.8 x 1.56 m Condition: never used / new (5)

Universal Tool Milling Machine Manufacturer: AVIA S.A., Poland Type / Model: FNE 40 P Year of Make: 2013 Serial Number: 90567 Accessories / Scope of Delivery • Machine Vise • Tool Holders SK40 • Various Milling Tools and Clamping Devices • Documentation / Documents   Dimensions (L × W × H): approx. 195 × 220 × 220 cm Weight: approx. 1,900 kg Table / clamping surface: • Clamping surface: approx. 800 × 400 mm • T-slot table • Max. table load: approx. 400 kg Travel paths / machining range: • X-axis: approx. 620 mm • Y-axis: approx. 420 mm • Z-axis: approx. 400 mm Spindle: • Spindle holder: SK 40 (DIN 69871) • Max. spindle speed: 4,000 rpm • Speed range: approx. 50 – 4,000 rpm, infinitely variable • Max. tool diameter: 125 mm • Max. tool weight: 6 kg Feeds: • Stepless feeds in X / Y / Z • Working feed up to approx. 2,000 mm/min • Rapi ...

Radial drilling machine - Clamping cube 750 x 500 x 500mm - Digital display for boom travel - Coolant system - Good condition Drilling capacity in steel 40 mm Projection 1600 mm Drilling capacity in cast iron 60 mm Spindle diameter 85 mm Quill stroke 350 mm Tool holder MK 5 Speeds 24 - 1050 rpm Feeds 0.06 - 1.0 mm/rev Column diameter 345 mm Threading device yes Drilling motor 5.5 kw Total power requirement 7.5 kW Machine weight approx. 4000 kg Dimensions approx. 2.5 x 1.0 x 2.99 m

Specifications: Control: Fanuc 0i-TD Hours: 12009 Capacity: - Swing over bed: 970mm - Swing over cross slide: 600mm - Centre height: 490mm - Width of carriage: 885mm - Width of cross slide: 350mm - Distance between centers: 4300mm - Width of bed: 560mm Headstock: - Chuck size: 605mm - Spindle bore: 153mm - Spindle nose: A2-11 - Spindle speed: 6.5 ~ 600rpm - Spindle power: 22/26kW Turret: - Tool size: 32mm - 4 positions Tailstock: - Quill diameter: 165mm - Quill traverse: 200mm - Tailstock center: MT#6 - Body movement: motorized Machine is equipped with: - 2 chip conveyors - Motorized tailstock body - Steady rest - Tooling as showed in pictures -

Drilling/milling machine with: • Tapping device • Cross table with adjustable guides • Drill quill feed • Manual transmission • SK 40 mount Drilling capacity in steel 40 mm Projection 275 mm Drilling stroke 120 mm Spindle Holder MK 4 Speed range 75 - 3200 rpm Table adjustment transverse 190 mm Table adjustment longitudinal 490 mm Table clamping area 700 x 210 mm Connection voltage 400 V Milling cutter diameter max. 80 mm Total power requirement 1.1/1.5 kW Condition: never used / new (5)