126,706 used machines on RESALE, but how to find them? Machine Search
A used BECK flow wrapping machine Serienpacker is offered. Fully automatic film packaging machine with 4-side sealing principle, operates with two flat film rolls upper and lower film, processing films PE, PP, polyolefin. Inspection by appointment possible.
The BA150E is a 6-inch mobile wastewater pump suitable for pumping contaminated water with particles up to 80 mm in diameter., This centrifugal pump is equipped with its own vacuum system and is therefore dry self-priming., Mounted on a fully hot-dip galvanized, stackable frame., , Drive: Electric motor, Discharge x suction: 6 x 6, Max. capacity: 430 m³/h, Max. delivery head: 24 mwc, Free passage: 80 mm, Vacuum system: MP50 (50 m³/h), Version: Dry self-priming, Motor: 22 kW, Poles: 4, Frequency: 50 Hz, Starting method: Soft starter, Voltage: 400/690V, , Do you have any questions? Please contact us for a personal consultation., , Throughput capacity: 400 m3/h, Max dirt passage: 80 mm, Motor brand: Hansa-Motoren, Max. head: 24 MWK, Weight: 1250 kg, , = More information =, , Year of manufacture: 2014, Applicable material: Water, Empty weight: 950 kg, Connector size: 6 Inch, Cargo space ca ...
A die-cutting and embossing machine Woschnik + Partner is available. Stroke rate: 9000/h, max. sheet dimensions X/Y: 820mm/1130mm, min. sheet dimensions X/Y: 360mm/400mm, gripper margin adjustment: 10mm-17mm, closing frame dimensions X/Y: 820mm/1134mm, max. die-cutting dimensions X/Y: 800mm/1120mm, cutting rule height: 23.8mm, max. punching force: 4000kN. Machine dimensions X/Y/Z: approx. 8000mm/2650mm/2950mm, weight: approx. 30000kg. Documentation available. An on-site inspection is possible.
turning diameter: 250 mm turning length: 400 mm control: Siemens 840 D swing diameter: max. 300 mm workpiece length - max.: 400 mm travel -x axis: 280 mm feed in x - axis: 0,1 - 30 m/min rapid traverse X-axis: 30 m/min travel -z axis: 1150 mm feed range Z-direction: 0,1 - 60000 mm/min rapid traverse Z-axis: 60 m/min spindle bearing diameter: 90 mm spindle head DIN 55026 - Size: A6 turning speeds: 1 - 5000 U/min tool turret 12 times: C4 Capto total power requirement: 45 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyor with chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power. ...
12 CNC-assen: Y1 / Y2 / Y3 / Y4 / V / X1 / X2 / X3 / X4 / R1 / R2 / R3 / R4 / X5 / X6 / Tandem kantbank: 2 x 2000 ton GWF Als je een werkstuk van 16 meter lang buigt, is de maximale keeldiepte 1250 mm. Buigvoorbeeld: 35 mm (normaal staal) over een lengte van 16 meter Capacity: 4000 ton x 16 200 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 4600 mm (2x) Max stroke: 1000 mm Max distance between table -- ram: 1650 mm Depth of throat: 1250 mm Table width: 650 mm Locking speed: 70 mm/sec Working speed: 4 > 7,5 mm/sec Returning speed: 75 mm/sec Electric motor (power): 75 kW (2x) Power needed: 380V Length: 7100 mm Depth: 5000 mm Height: 6350 mm (above floor) Weight: 500 ton (2x 250 ton) Capacity: 4000 ton Bending length: 16200 mm
turning diameter: 250 mm turning length: 400 mm control: Siemens 840 D swing diameter: max. 300 mm travel -x axis: 280 mm feed x-axis: 0,1 - 30.000 mm/min rapid traverse X-axis: 30 m/min travel -z axis: 1.150 mm Feed z- axis: 0,1 - 60.000 mm / min. rapid traverse Z-axis: 60 m/min spindle bearing diameter: 90 mm spindle head DIN 55026 - Size: A6 turning speeds: 1 - 5.000 U/min tool turret - number of stations: 12 tool taper: Capto C4 total power requirement: 45 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyor with chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power. The dat ...
turning diameter: 250 mm turning length: 400 mm control: Siemens 840 D swing diameter: max. 300 mm workpiece length - max.: 400 mm travel -x axis: 280 mm feed in x - axis: 0,1 - 30 m/min rapid traverse X-axis: 30 m/min travel -z axis: 1150 mm feed range Z-direction: 0,1 - 60000 mm/min rapid traverse Z-axis: 60 m/min spindle bearing diameter: 90 mm spindle head DIN 55026 - Size: A6 turning speeds: 1 - 5000 U/min tool taper: Capto C4 total power requirement: 45 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyor with chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power. The data ...
serial number: 1106479 : 400 miter: ja cooling: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 4000 mm width: 1800 mm height: 1800 mm : 5000 x-travel: 600 mm tail stock: ja tool adaptor: VDI 30 weight of the machine ca.: 5,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 4.000 mm y-travel: 1.700 mm z-travel: 1.500 mm control: HEIDENHAIN iTNC 530 clamping table: - surface area: 4.200 x 1.100 mm max. workpiece weight: 10.000 kg/m² T-slot number x size: 7 x 22 mm Abstand 150 mm feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/min Orthogonal indexable milling head: - Swiveling area front/back level: 0,02 x 0,02 ° = 162 Pos., Power at S1/S6 ED: 30 kW Speed range, stepless: 60 - 6.000 min-1 max. torque: 1.500 Nm tool taper: SK 50 – DIN 69871 ZF - Gearbox: 2 Getriebestufen automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/200 mm workpiece length: 400 mm weight of tools max.: 25 kg changing positions: Horizontal/Vertikal total power requirement: kW weight of the machine ca.: 50 t dimensions of the machine ca.: 11,0 x 6,0 x 4,6 m Equipment / Accessories Universal milling head UAD, 0.02x0.02°, positioning via inter ...
internal diameter: - mm grinding depth: - mm swing diameter: - mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
internal diameter: - mm grinding depth: - mm swing diameter: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: max. 3.800 mm diameter of spindle flange: 1.900 mm max. swing diameter: 3.800 mm control: 840 D sl Siemens Main spindle:: turning speed range - main spindle: max. 100 min/-1 power capacity - main spindel: 200 kW max. Torque: 67.000 Nm gear box: 1:30 max. load: - kg C-Axis: Tool Mount:: Rechts / Right tool taper: Capto C8 swivellable: B: 0 - 270 ° Spindle speed - driven tool pos.: max. 6.000 min -1 max. Torque: 120 Nm Tool Mount:: Links / Left tool taper: Capto C8 tool magazin:: Rechts / Right number of toolpositions: 41 pos. max. tool weight: 20 kg max. tool length: 400 mm max. tool diameter: 120 mm 0: 125 mm tool taper: Capto C8 tool magazin:: Links / Left number of toolpositions: 25 pos. workpiece diameter at full load: 150 mm max. tool weight: 20 kg max. tool length: 400 mm axis stroke:: x-axis: 1: 2.800 mm x-axis: 2: 3.200 mm z-axis: 1.000 mm feeds:: rapid trav ...
Silo system for granules or pellets up to 1000 kg/m3 Loading by bucket elevator Distribution with conveyor corners Discharge organs oscillomats Truck can be driven under Plant was only in operation for a short time
CNC vertical milling machine Type: FBE-4000 Producer: Eumach Year: 2013 Control: Fanuc Series 31i-MB X: 4000 mm Y: 1000 mm Z: 1500 mm Tool magazine: 24 positions Spindle cone: ISO 50 Work area: 1050 x 4100 mm Max table load: 9000 kg Power on spindle: 22/26 KW Spindle speed: 5000 rpm Manual rotating head, speed 3500 rpm Cooling through the center of the spindle Folding the tool tray outside the table area - next to the stand on the left Chip conveyor Work probe OMP-60 Tool probe TS-27 R Machine Weight: 22500 kg Machine in good condition, fully functional Find more here - / Contact us at -
A Hiller two-phase centrifuge for solid-liquid separation and dewatering is available. Drum speed: 2700rpm, max. operating speed: 2650rpm, max. feed material density: 1.3kg/dm³, drum inner diameter: 752mm, drum wall thickness: 20mm, drum material: 1.4470, max. operating temperature: 50°C, max. operating pressure: 0bar, motor power: 75kW. Machine dimensions X/Y/Z: approx. 5100mm/2300mm/1750mm, weight: approx. 11600kg. Documentation available. An on-site inspection is possible. Image is an example.
material width: 0400 mm coil weight: 1,50 t material thickness: mm nomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mm range of expansion ca.: 460 - 530 mm coil outside - diam. ca.: 1500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 4000 mm plate thickness: 30 / 35 mm pre-bending: 30 mm diameter of upper rolls: 570 mm side roll diameter: 450 mm diameter of lower rolls: 540 mm bending speed: 4 m/min min. bending diameter: 650 mm total power requirement: 60 kW weight of the machine ca.: 52 to dimensions of the machine ca.: - m The machine was overhauled in 2022 Equipment: - Hydraulic 4-roller round bending machine - Roll material: 61 MnCrMo 43 - Driven rolls: 2 Top-and bottom roll -- Drive: over 2 hydro motors direct flanged -- Adjustment speed bottom roll: 0-200 mm/min -- Adjustment speed side rolls: 0-700 mm/min - Speed compensation between top-and bottom roll: automatic - Operation of the tilting bearing: hydraulic - Tilting of the top roll: hydraulic - Bearing block: hydraulic - Indicator device of roll position: digital The data for this ad was created with ModulMWS - the software solution of Logo ...
Inv. Num. : 8985 Type: FL 400 3D Producer: Bystronic Created: 2020 Parameters: Operating hours: 11000 h Maximum cutting diameter: 406 mm Input/output length: 12000 mm
(2013) 400t Müller Knuckle-Joint Press Precision Knuckle-Joint Press for High-Speed Forming This year-2013 Müller press provides a 4,000 kN pressing capacity and a high-efficiency 55 strokes per minute cycle rate. Engineered for modern industrial precision, it features safety response times suitable for high-volume production environments. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Müller Model Type: KNP 400 Machine Number: 2703 Year of Manufacture: 2013 Nominal Force: 400t Work Capacity: 13 kJ Ram Stroke: 70 mm Ram Adjustment: 45 mm Stroke Rate: 55 strokes/min Shut Height (Table to Ram): 380 mm (Stroke down, adjustment up) Ram Surface Area (W x D): 500 mm x 400 mm Table Surface Area (W x D): 500 mm x 500 mm Motor Output: 15 kW Operating Voltage: 400 V Safety Distance: 190 mm Limit Value (Stopping Time): 95 ms Total Weight: 1 ...
A take-up winding machine Sahm for parallel winding is available, traverse width range: 10mm-300mm, max. spool diameter: 400mm, wound material: monofil, max. tape width: 30mm, max. yarn speed: 600m/min, max. winding width: 310mm, max. spool weight: 20kg, tension force range: 10cN-1250cN, winding heads: 90, documentation available, on-site inspection is possible.
A Kiekens extraction and filtration system is available. Filter medium: polyester needle felt, max. filter area: approx. 12m³, max. air volume flow: 3400m³/h, max. residual dust content: 1mg/m³, dust container volume: 55l, machine dimensions X/Y/Z: approx. 800mm/800mm/2500mm, weight: approx. 300kg. Documentation available. An on site inspection is possible.
This EUMACH FBE-4000 Vertical Machining center was manufactured in the year 2013 in Taiwan. It is equipped with a Fanuc Series 31i control unit and has 3 axis. The machine has a spindle speed of 3500 rpm.
turning diameter: 480 mm turning length: 800 mm control: System TX8F turning diameter over slide: 240 mm spindle passage: 65 mm chuck diameter: 200 mm turning speeds: 4000 U/min power capacity: 30 kW total power requirement: kW weight of the machine ca.: 4,3 t dimensions of the machine ca.: m powered tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 890,820 mm turning length: 4000 mm control: Siemens SIN 880T spindle taper: DIN 55026/15 spindle passage: 122 mm cross movement: 500 mm quill stroke: 140 mm tailstock adjustment: 3708 mm spindle turning speed range: 5-1800 U/min milling tool taper: 1500-6000 U/min feed: 0,5-5000 mm/min rapid traverse: 15 m/min feed power: 22000/10000 N Tool changer: 95 St. steady: CNC tail stock: CNC total power requirement: 50/69 kW weight of the machine ca.: 23,5 t dimensions of the machine ca.: 10x4x3,3 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, produc ...
Complete line for washing/sterilising/filling/sealing/labelling/stretch-banding open funnel/stem cut ampoules made of glas, consisting of: Bosch RRU 3063 washing machine Bosch HQL 2220 sterilising/pyrogenising tunnel Filling/capping machine Bosch ALF 4060 Labelling machine Bosch ERS 2010 (500) Folding box cartoning machine Bosch CUK 1060 for 12 ampoules/carton Skinetta ASK 450-bU banding machine Output max. 18,000 ampoules/h depending on size: - 1 ml, 18,000 ampoules/h - 2 ml, 18,000 ampoules/h - 3 ml, 16,800 ampoules/h - 5 ml, 13,500 ampoules/h - 10 ml, 9,900 ampoules/h - 20 ml, 6,000 ampoules/h Capacity for ERS 2010 max. 30,000 ampoules/h With format parts for 1 ml ampoule Ø 10.75 x H 65.0 mm (unfilled, open), H 45.0 mm (filled, closed) Menu languages English, Mandarin PLC Siemens S7-300 Danfoss VLT 2800 servo inverter CE decla ...
plate width: 5000 mm plate depth: 2000 mm plate height: 400 mm total power requirement: kW weight of the machine ca.: 9,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Aircooled chiller TECHNOTRANS OMEGA K 400L 55 KW Cooling capacity: 55 kW / 15.64 tons (13/18 — 35°C) Year of manufacture: 2018 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZR125KCE-TFD-455 (scroll) Type of refrigerant: R407c Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Grundfos MG100LC-F-H3-CML3A, buffer tank. Dimensions: 1.67x0.86x1.8 m. Weight: 700 kg. Condition: Good
1 x 6 x HSN skid, 1 oil cooler, 1 condenser, 2 x 50kw evaporators, 2 x 90kw evaporators, 1 electrical cabinet, 2 x Munters dehumidifiers.
A complete cut-off grinding system is available. System components: 1) Cut-off grinding machine Harald Baumgarten. 2) Bundle loader Sema Systemtechnik. 3) Bar breaking device. 4) Bar rotating drive and measuring station. 5) Weighing station with section sorting. 6) Extraction and filter system. 7) Soundproof cabin with safety fencing. 8) Four-column press Winter. 9) Hydraulic power unit with pumps. 10) Control cabinet and operator panel. Documentation available. An on-site inspection is possible.
Working width: 4040mm, max. sheet thickness steel/stainless steel: 5mm/3mm, back gauge: 1000mm, weight: approx. 7000kg, control system: Elgo, working hours: approx. 22051h. An on-site inspection is possible.
A Bystronic CNC laser cutting system is available. Travel X/Y/Z: 4020mm/2020mm/170mm, max. sheet weight: 1500kg, positioning speed: 60m/min, simultaneous speed: 80m/min, positioning accuracy: +/-0.1mm, repeat accuracy: +/-0.05mm, laser: CO2, laser source: ByLaser 4400, laser power: 4400W, overall system dimensions X/Y/Z: approx. 8000mm/15000mm/2.5mm, cutting time: 17469h, power on: 35200h. Including two spare cutting heads 7.5in and 5in as well as various spare parts. Documentation available. An on-site inspection is possible. Expected to be available from June 2026.
Kodak Magnus 400 F with stacker, using Kodak Sonora XTRA 3 process free plates, under power in print shop. Available immediately.
used
Cutting area round/square: 190/190 x 190 mm Cutting area in mitre 45° round/rectangle: 140/190 x 140 mm Saw blade dimensions: 400 x 32 x 1.5 mm 1 Lifting speed: 85/min Drive motor: 380 V, 0.37 kW Weight: 126 kg Space requirement: 1200 x 600 x 980 mm
x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm Control: M 730 BM MAPPS IV distance spindle center to table: 80 - 640 mm distance Spindlenose and center of table: 70 - 730 mm Main spindle:: max. spindle speed: 12.000 min/-1 power capacity - main spindel: 15 / 11 kW tool taper: SK 40 spindle diameter in front bearing: 80 mm pallet changer:: numbers of pallets: 2 pos. work height max.: 1.050 mm size of pallet: 400 x 400 mm max. workpiece weight: 400 kg max. workpiecediameter: 630 mm Max. workpiece - hight: 900 mm B-Axis: 0,001 ° Indexing-time 90°: 1,3 sec change time of pallets: 8,0 sec Tool-Presetter:: number of toolpositions: 60 pos. tool taper: SK 40 max. tool diameter: 70 mm max. tool-dia with free toolbox: 170 mm max. tool length: 450 mm max. tool weight: 8 kg change-time tool to tool: 0,9 sec change-time chip to chip: 2,8 - max. 9,9 sec feeds:: feed speeds: max. 60.000 mm/mi ...
Machine Name: Decanter Centrifuge Manufacturer: Alfa Laval NX 4045 Type: 919B-31G Year of Make: 1993 Max. Drum Speed: 3250 1/rpm Material: Stainless Steel Drive motor: 18.5 / 21 kW Inner diameter drum: 353 / 198 Inner drum length: 1200 mm Permissible. Sediment density: 1.2 kg/dm3 Dimensions: Length 3000 x Width 1000 x Height 1150 mm Curb weight: 2500 kg Tech. Documentation: Yes Remark: Eddy current brake Accessories: A control cabinet Condition: Used Price: On request
x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm Control: M 730 BM MAPPS IV distance spindle center to table: 80 - 640 mm distance Spindlenose and center of table: 70 - 730 mm Main spindle:: max. spindle speed: 12.000 min/-1 power capacity - main spindel: 15 / 11 kW tool taper: SK 40 spindle diameter in front bearing: 80 mm pallet changer:: numbers of pallets: 2 pos. work height max.: 1.050 mm size of pallet: 400 x 400 mm max. workpiece weight: 400 kg max. workpiecediameter: 630 mm Max. workpiece - hight: 900 mm B-Axis: 0,001 ° Indexing-time 90°: 1,3 sec change time of pallets: 8,0 sec Tool-Presetter:: number of toolpositions: 60 pos. tool taper: SK 40 max. tool diameter: 70 mm max. tool-dia with free toolbox: 170 mm max. tool length: 450 mm max. tool weight: 8 kg change-time tool to tool: 0,9 sec change-time chip to chip: 2,8 - max. 9,9 sec feeds:: feed speeds: max. 60.000 mm/mi ...
Key data: 400 KW, 500 kVA, 230 V
New CUMMINS gas generator. 400 kW in a soundproof container. Price is for the generator in the container. (Can be equipped with heat exchanger equipment) K19N-G4 engine; Leroy Somer TAL-A473 generator Voltage 230/400 Volts
Unused Bowl Spindle for an Alfa Laval MRPX 409 SGV Separator., Type of Machine: Bowl Spindle, Drive line: 50 Hz
Overview This sleeve labeling machine was manufactured in 2007 by the Italian company CLEVER Machines. The machine is in very good condition, has been regularly serviced with original spare parts, and is currently dismantled and stored in a dry warehouse. It comes with an integrated shrink tunnel. Technical data Capacity: 18,000 bottles per hour Label positions: Full bottle sleeve or partial bottom sleeve Additional components: Shrink tunnel CLEVER Machines STJ 3 Scope of Delivery CLEVER Machines GS 4001 sleeving unit Shrink tunnel CLEVER Machines STJ 3
grinding diameter: 850 mm grinding length: 4.000 mm centre height: 525 mm workpiece weight max. betw. centres with steady: 5.000 kg control: SINUMERIK 840 D Feeds & travels: - feed Z-axis: 0,01 – 6.000 mm/min feed X-axis: 0,01 – 6.000 mm/min Travel Z-axis (table): 4.500 mm Travel X-axis (grinding spindle): 650 mm Grinding wheel: - Max. Dimension: Ø1.060x60x304,8 mm grinding wheel speeds: 1.100 min-1 peripheral speed: 45 m/sec power: 22 kW tail stock: - Taper: MK 6 quill travel: 100 mm diameter of quill: 115 mm Workpiece spindle: - Taper: MK 6 Speed range workpiece: 10 - 120 min-1 torque of the drives: 41,5 NM control: total power requirement: 52 kW weight of the machine ca.: 25,5 t Equipment & Accessories CNC cylindrical grinding machine in most robust design for heavy workpieces • Scope of geometric retrofit: • Slideways of X- and Z-axis regrinded, intermediate table and top ...
spindle passage: 80 mm max. turning diameter: 395 mm Max. Turning length: 750 mm control: System TX 8H max. Spindle speed: 3.150 U/min. CNC lathe | TRAUB - TNA 400 The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA400 | TNA-400 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton
Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton
Model: PLT-400 Year: 2022 Condition: Used Serial Number: 10492297 Stock Number: 3190J Belt width: 400 mm Product thickness 3 - 51 mm Belt speed: 0.36 - 24 m/min Compressed air: 0.7 l/min Power: 3 x 400V, 50Hz, 3kW Dimensions: 3300 x 1100 x 1500 mm Weight: 650 kg With extra long infeed conveyor of 1600 mm
Work table AT 4000 with beech wood top mobile Stainless steel work table AT 4000 with beech wood worktop bottom with shelf Drawer block left Dimensions: 4000 x 800 x 900 mm WxDxH Used device cleaned
Work table AT 4000 with beech wood top mobile Stainless steel work table AT 4000 with beech wood worktop bottom with shelf Drawer block left Dimensions: 4000 x 800 x 900 mm WxDxH Used device cleaned
maximum number of results exceeded
please refine your search
