maho mh used for sale

sheet width: 4080 mm plate thickness: 2.0 mm ST thickness at Niro-steel: 0.8 mm Sheet thickness for ALU: 2.5 mm no. of strokes: 34 Hub/min cutting angle: 1.3 Grad distance between columns: 4310 mm back stop - adjustable: 15.0 - 750 mm table height: 820 mm Control: ELGO engine output: 9.0 kW weight of the machine ca.: 3600 kg. range L-W-H: 5250 x 2200 x 1400 mm Good condition () Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in  ...

Little-used guillotine shears, only occasionally 1.5 mm sheet thickness Stroke rate 56/ min. Power (Rm 400/mm) 3.5mm Rated power 4.0 kVA Weight 860 kg

Cabin dimensions X/Y/Z: 3500mm/3500mm/2500mm, door dimensions X/Y: 2800mm/2200mm, small door dimensions X/Y: 1000mm/2000mm, illumination: approx. 750Lux, rotary table diameter range: 1000mm/2500mm, max. workpiece height: 300mm, max. table load (centered): 300kg, horizontal stroke: 2800mm, vertical stroke: 400mm, nozzles: 3. Pressure blasting pot volume: 200l, operating pressure: 8bar, deduster air volume flow 1: 1800m³/h, filter area 1: 17m², deduster air volume flow 2: 3600m³/h, filter area 2: 30m². Overall system dimensions X/Y/Z: approx. 3660mm/3660mm/2650mm, control: Siemens KTP700. Documentation available. An on-site inspection is possible.

Bread slicer MHS creel BM 45 N Creel cutting machine floor model Model: MHS BM 45 N with crumb drawer at the bottom Machine mobile Connection 220V Used machine cleaned Option: Leasing & Rental Service Maintenance contract Delivery Instruction & Commissioning

Injector Manufacturer: Nowicki Stainless steel Multi-needle brine injector It has 39 needle sockets and can use up to 156 needles It has a closed brine circulation system with a multi-stage filtration system and a stainless steel centrifugal pump Brine pressure can be controlled up to 3 bar The machine can process between 500 and 3500 kg of product per hour, depending on the specific product Voltage: 400V / 50Hz

Sandblasting machine for glass manufacturer MHG Strahlanlagen GmbH Düsseldor plus linear beam pressure/shadow gradient vertically and horizontally plus level sensor plus Basic Mobil Fine Blasting Machine plus screw compressor from WEBER, model AMB 11-10 Plus. Window frames right and left Mass: Width 611.8 cm Height 283.3 cm Depth 138.1 cm Complete for immediate use

From a current recycling we offer you various bakery furnishings including baking proofer, bread slicer, freezer, stainless steel sink. Year of manufacture: various (including 2014/2015) First registration: / Condition: used. Functionality cannot be guaranteed Hours: / Asking price: 5.000,00 Euro VHB Factory Price: Equipment / accessories / other information: Back proofer, 15 chairs, bread slicer, stainless steel sink, freezer, filter proofer, POS system screen, cream climate cabinet Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 63607 Wächtersbach The sale is without warranty Subject to prior sale

sheet width: 1530 mm plate thickness: 4.0 mm thickness at Niro-steel: 2.0 mm no. of strokes: max. 34 Hub/min cutting angle: 2.70 Grad distance between columns: 1540 mm work height max.: 920 mm voltage: 400 V Control: konv. engine output: 3.2 kW weight of the machine ca.: 1115 kg. range L-W-H: 2275 x 2220 x 1400 mm Features: - Robust motorized swing-arm guillotine shear - Break-resistant, torsion-resistant welded steel construction - Compact and easy-to-use machine design - Manual backgauge, adjustable from the rear Stepless adjustment across the entire travel range - 1x hold-down bar - 1x freely movable foot switch - Front, extendable table extension - Rear safety device - Original operating instructions Optional accessories included: - Sheet metal holding device for thin sheet metal blanks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bread slicer MHS Compact Circular knife machine mobile Knives newly sharpened and coated Manual operation via membrane keypad simple, robust technology Dimensions: 600 x 730 x 1200 mm, WxDxH only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Spare blade Maintenance contract Delivery Service Package E-Box Instruction & Commissioning

Bread slicer MHS creel BM 45 N Creel cutting machine floor model Cutting thickness 10 mm Automatic Controls with crumb drawer at the bottom Stainless steel version, knife lubrication with original Teflon special knife Machine mobile with brake only DGUV V3 tested by us Connection 400V, 16A-CEE plug Dimensions: 600 x 750 x 1100 mm, WxDxH Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Leasing & Rental Service Maintenance contract Delivery Instruction & Commissioning

Bread slicer MHS Compact Circular knife machine mobile Knives newly sharpened and coated Manual operation via membrane keypad simple, robust technology Dimensions: 600 x 730 x 1200 mm, WxDxH only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Spare blade Maintenance contract Delivery Service Package E-Box Instruction & Commissioning

Dimensions (L/W/H): 7600x1400x1800 mm Weight: 2950 kg Total power requirement: 9,15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3960x1400x1800 mm Weight: 1200 kg total power requirement: 9,15 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6000x1400x1800 mm Weight: 2500 kg total power requirement: 8,05 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1400x1800 mm Weight: 2200 kg total power requirement: 9,15 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25507 Technical data: - Max. working width 2520 mm - Max. material thickness 2.0 mm - Cutting angle 2.2 ° - Stroke rate up to 25 1/min - Back gauge with ELGO positioning control up to 750 mm - Table height 850 mm - Front angle stop 2000 mm - 2 front support arms 1000 mm - pneum. Supported sheet metal hold-up - E-footswitch - Typing - Single stroke pre-selectable - Rear protection grille - Drive 400 V / 3 kW - Space requirement approx. W 3450 x H 1150 x D 2200 mm - Weight approx. 1600 kg

This machine is ideal for use in bakeries, restaurants, or grocery stores. It impresses with its robust construction, ease of use, and consistent slicing quality.

pressure: 100 t stroke: 380 mm table surface area: 1100x424 mm dayligth: 180/750 mm distance between columns: 1100 mm diameter of piston: 90 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 060 t stroke: 350 mm table surface area: 750x344 mm dayligth: 197/750 mm distance between columns: 750 mm diameter of piston: 75 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU288X384 MakeIka Werke TypeMHD 2000/05-ATEX No.200023306 Year of construction2020 Mounted on framecheck Main Features MaterialStainless steel Motor7.5 KW Rotor60 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 60x150 mm InletDN50 OutletDN32 Number of stages:2 Capacity700 l/h Motor7,5 kW, 400/690 volt, 2910 rpm, (Ex) Rotor speed6000 rpm MaterialStainless steel 1.4306 (304L) Information LocationBarneveld Floorspace0,70x0,40 m Total height1,20 m CEcheck ATEX compatiblecheck Extra SpecificationsTotal cap. 700 l/h, solids cap. Max 500 l/h.Inline high shear mixersIKA WerkeMixers > Inline high shear mixersBrand > IKA Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

Bread slicer MHS 2015 year

through-put width: - mm working heigth: - mm : - serial number: 2044 total power requirement: - kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer : MHS Model : BM 45 N mobile 400 Volt Cutting width 10mm Baker condition Details see picture

Bread Slicer Machine Creel GM 450 Manufacturer : MHS Model : GM 450 Mobile 400 Volt Cutting Width 11mm Baker Condition Details see picture

Bread slicer / bread slicer - used - in working order - Type MHS Ideal SB - year of construction 2013 - mounted on 4 wheels for easy change of location - for all types of bread - exterior dimensions width: 89 cm, d.: 73 cm, height: 112 cm

Bread slicer MHS Ideal SB Bread slicer - used - in working order - Type MHS Ideal SB - Year of manufacture 2011 - 3 adjustable cutting widths (10, 12 and 14 mm) - Exterior dimensions W.: 89 cm, D.: 73 cm, H.: 112 cm

Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, valve manifold -Solenoid valves: Type 525179 MHP4-MS1H-3/2G-1/4 RR-FTO-KC-2018-1055 -Battery block: MHA4-PR4-3-1/4 525235 -Individual components: see photos -Number: 7x valve manifolds available -Price/Fee: per unit -Dimensions: 260/155/H100 mm -Weight: 2 kg/pc.

Key data: 3200 mm, 2 mm

Motorized guillotine shears, can be operated from the front with manual depth stop 750 mm, with digital display Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 3200 mm Sheet thickness steel: 2.0 mm Sheet thickness aluminium: 2.5 mm Sheet thickness front: 1.5 mm Farbe/Colour weiß/blau Total power requirement: 32 A Machine weight: 2220 kg Dimensions: 3700 x 2500 x 1600 mm without cutting gap adjustment Connected voltage: 3 x 400 V/50 hz Connected load :5.0 kVA Projection: 750 mm Min. back gauge: 750 mm Machine number: 2300840

Sandblasting machine MHG SMG 45K -Working space 1000x600x750mm -Work gloves -Two side doors, dustproof closing -Double-walled, noise-absorbing foamed -On/Off Suction & Lighting -Pressure regulators, pressure gauges and foot switches -Viewing panel Dimensions: LxWxH 1.5x1.5x1.8 / Weight 380Kg

MHS Ideal SB Year of manufacture 2019, from dissolved Real Markt Machine is in good condition, but should be thoroughly cleaned before use. Three different cutting thicknesses can be set. Ideal for the self-service area in the store. Voltage: 230V Dimensions: 95x72x128H Weight: 190kg Power: 1000W Video about test run available

used SB Ideal Bj. 2015 bread slicer MHS â Product description âœ" Manufacturer: MHS Schneidetechnik GmbH âœ" Type: MHS Ideal SB âœ" Material: stainless steel âœ" Condition: used, cleaned, tested âœ" Year of manufacture: 2015 âœ" Cutting width adjustable (10, 12 and 14 mm) âœ" for all types of bread âœ" on rolls, mobile âœ" External dimensions W.: 89 cm, D.: 73 cm, H.: 112 cm âœ" Power: 230 V+N+PE / 4.8 A / 1.01 kW See pictures for details. Is the right item not listed? We have a wide range of machines and accessories for bakeries, pastry shops and the

used bread slicer SB year 2014 MHS Ideal â Product description âœ" Manufacturer: MHS Schneidetechnik GmbH âœ" Type: MHS Ideal SB âœ" Material: stainless steel âœ" Condition: used, cleaned, tested âœ" Year of construction: 2014 âœ" Cutting width adjustable (10, 12 and 14 mm) âœ" for all types of bread âœ" on wheels, mobile âœ" External dimensions W.: 89 cm, D.: 73 cm, H.: 112 cm âœ" Performance: 230 V+N+PE / 4.8 A / 1.01 kW See pictures for details. Is the right item not listed? We have a wide range of machines and accessories for bakeries, pastry shops and the

used MHS Ideal bread slicer SB year 2013 â Product description âœ" Manufacturer: MHS Schneidetechnik GmbH âœ" Type: MHS Ideal SB âœ" Material: stainless steel âœ" Condition: used, cleaned, tested âœ" Year of manufacture: 2013 âœ" Cutting width adjustable (10, 12 and 14 mm) âœ" for all types of bread âœ" on wheels, mobile âœ" External dimensions W.: 89 cm, D.: 73 cm, H.: 112 cm âœ" Performance: 230 V+N+PE / 4.8 A / 1.01 kW See pictures for details. Is the right item not listed? We have a wide range of machines and accessories for bakeries, pastry shops and the

MHS Ideal Bread Slicer SB Year 2012 used â Product description âœ" Manufacturer: MHS Schneidetechnik GmbH âœ" Type: MHS Ideal SB âœ" Material: stainless steel âœ" Condition: used, cleaned, tested âœ" Year of construction: 2012 âœ" Cutting width adjustable (10, 12 and 14 mm) âœ" for all types of bread âœ" on rolls, mobile âœ" External dimensions W.: 89 cm, D.: 73 cm, H.: 112 cm For details see pictures. Is the right item not listed? We have a wide range of machines and accessories for bakeries, pastry shops and restaurants. Feel free to contact us or take a look at

used bread slicer MHS Ideal SB year 2011 â Product description âœ" Manufacturer: MHS Schneidetechnik GmbH âœ" Type: MHS Ideal SB âœ" Material: stainless steel âœ" Condition: used, cleaned, tested âœ" Year of construction: 2011 âœ" Cutting width adjustable (10, 12 and 14 mm) âœ" for all types of bread âœ" on rolls, mobile âœ" External dimensions W.: 89 cm, D.: 73 cm, H.: 112 cm For details see pictures. Is the right item not listed? We have a wide range of machines and accessories for bakeries, pastry shops and restaurants. Feel free to contact us or take a look at

used bread slicer MHS Ideal SB year 2010 â Product description âœ" Manufacturer: MHS Schneidetechnik GmbH âœ" Type: MHS Ideal SB âœ" Material: stainless steel âœ" Condition: used, cleaned, tested âœ" Year of construction: 2010 âœ" Cutting width adjustable (10, 12 and 14 mm) âœ" for all types of bread âœ" on rolls, mobile âœ" External dimensions W.: 89 cm, D.: 73 cm, H.: 112 cm For details see pictures. Is the right item not listed? We have a wide range of machines and accessories for bakeries, pastry shops and restaurants. Feel free to contact us or take a look at

ID3751 Caterpillar MH3040 year/Year of construction 2022 approx. 6.200 hours/hours Material handler, elevating cab, with 4 outriggers, with grab Material handler, elevating cab, with 4 outriggers, with grab

; NEW

Maho UIniversaltisch

Various sub-equipment from a training workshop, to hand over individually, e.g. lid sub-device with upper beam and counter holder, Universal part apparatus with initial division Walter UTA150E with counter holder and rotary chuck 3 partial discs with parts see above, Part apparatus Walter can be swivelled without initial division. Furthermore Luenetten standing and running, on request please Specify the tip height and distance mid prism to mid plan area. Rest according to photo. Other sub-equipment susengar, Direct division Indirect division, various large sum. Please ask Sub-discs for UTA 150 E 22 24 29 36 37 49 57 63 16 30 33 36 39 51 57 63 16 27 30 33 41 47 53 61 Special price

Key data: 500 , 520 , 380

Bearing number 1105-02750 Machine Type Machining Center - Universal Make DMG DECKEL-MAHO Type DMU 50 eV / 5 axes Built in 2001 Control type CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight base EX WORK Technical details x-way 500 mm y-way 420 mm z-way 380 mm Control HEIDENHAIN TNC 430 Spindle cone SK 40 Speeds 18,000 rpm Spindle motor 15 kW Rapid speed 50 m/min Table clamping area 500 per m. x 380 mm Feed range up to 20 000 mm/min Tool change device 32 fold Total power requirement 38 kVA Machine weight approx. 5.9 t Information - CNC - CONTROL of the display of HEIDENHAIN TNC 430 - 5-axis machine with B + C axis - Spindle on: 22 800 h - Current on: 38 000 h - Machine documents spaenefoerderer

Control cabinet for MAHO 600 - MAHO had manual transmission damage and was therefore exploited. - Are also other parts in stock. Please inquire! Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Control type: CNC Sinumerik 840D-SL x-way 1135 mm y-way 1050 mm z-way 750 mm table size 1400 x 1050 mm Table load 2500 kg max. workpiece size LxWxH 1400 x 1240 x 750 mm Speed 10000 rpm feed speeds X/Y/Z Axis 40000 mm/min Expressspeeds x/y/z 40000 mm/min Tool holder HSK-A100 HSK Number of places in the tool magazine 30 places max. tool weight 20 kg max. tool length 395 mm max. tool diameter 110 mm Machine height 3294 mm Drive power - spindle motor 44 kW machine weight approx. 17.9 t Space requirements approx. 15 m2 Information: Universal milling machine in mono BLOCK design (3-axis) - available September 2019 - only 3800 spindle hours, 13400 power-on hours Equipment / Accessories: - Coolant system - High-pressure pump - Chip conveyor - Hand-held panel - BALLUFF option - Documentation

Knives for bread slicers NEW

Machine details Location 1105-02917 Machine type Machining Center - Vertical Make DECKEL-MAHO DMG Type DMC 63 V Built 2001 Control type Cnc Location France Origin Germany Delivery JULY 2020 Freight base from stock, freely loaded Price On request Technical details x-Way 630 mm y-way 500 mm z-way 500 mm Table size 800 x 500 mm Spindle mount ISO 40 Range 0 - 8000 rpm Feeds - longitudinal/transverse/vertical 1 - 30000 mm/min Rapids - longitudinal/transverse/vertical 30 m/min Number of tool magazine slots 24 Tool diameter at full assembly 80 mm Tool diameter at 2 free spaces 140 mm Tool length max. 300 mm Tool weight max. 7 kg Table load 500 kg Spindle motor 9 / 13 kW Control Siemens 810 D Total performance requirements 30 kVA Machine weight approx. 4.2 t Information Tested machine ready for demonstration under current YEAR OF ...

Machine details 1105-02953 Machine type Machining Center - Vertical Make DECKEL-MAHO (DMG) Type DMC 64V Built 2002 Control type Cnc Location Haguenau Origin Germany Delivery Right away Freight base from stock Price On request Technical details x-Way 640 mm y-way 600 mm z-way 500 mm Control HEIDENHAIN TNC 530 Machine weight approx. 8 t Information 1 gebr. CNC vertical BAZ Fabr. DECKEL-MAHO Type DMC 64V linear, Y.O.M. 2002 1 used CNC Vertical Milling Center DECKEL-MAHO type DMC 64V linear, built 2002 WITH 2 AXIS PART APPARAT INCLU CNC Control HEIDENHAIN TNC 530 30-fah tool changer Conveyor 30-fold ATC chip conveyor Technical data / technical details: X-Way / X-travel 640 mm Y-way / Y-travel 600 mm Z-way / Z-travel 500 mm Spindle holder / spindle taper SK40 Speed range / spindle speed 0-12000 rpm Feed range X , Y , Z / feed range X , ...

-X-Way-700mm -Y-way-700mm -Z-way-700mm -Control-ITNC 530 -Spindle holder HSK A63 -Spindle speed-12000rpm -Plate changer with 7 pallets -Tool magasin with 120 -Internal cooling feeder-40bar -Spindle motor-20kW -Pallet size 500x500mm -Machine weight approx.16t -Top condition,to be visited under electricity

Universal - Swivel - Tilting table for MAHO MH 1000 Clamping area: 1050 mm x 630 mm The Universal - Swivel - Tilting Table is in good condition

Deckel Maho DMG DMU 70eVolution 5Axis simultaneous Machining center CNC Hersteller [manufacturer]: DMG Deckel Maho Type [ type]: 70eVolution Control unit: Heidenhain iTNC 530 Incl. handwheel Baujahr[construction year]: 12/2006 - Renewed/renewed spindle - IKZ integrated cooling system for water 40bar and air (both possible) Travel X/Y/Z 750/600/520 mm B-axis 0 to 180° degrees C-axis n x +-360° degrees Table load up to 350kg Spindle speed range 20 to 18,000 1/min. Tool holder SK 40 DIN 69871 Weight [weight]: 10.000kg Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Tel. 017621834834Price, from stock here plus VAT Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted.  ...

Fully functional used CNC milling machine Deckel Maho DMU 60 with rotary table Built in 1999 Heidenhain Control We would like to point out that this machine is in excellent technical and well-maintained condition for its age (due to the IATF certification). Regular maintenance is already required on the basis of the certification and the machine therefore works 100% perfectly. The machine is still energized and can be viewed and tested at any time. All maintenance logs are in place. The machine will have to leave the hall in the first quarter of 2025. This means that the machine could remain energized until mid-March 2025 to demonstrate it under power. Of course, the machine would also be available immediately. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your answer and interest in adv ...