maho mh used for sale

x-travel: 800 mm y-travel: 450 mm z-travel: 500 mm Control: CNC 332 / TNC 355 total power requirement: 5,5 kW weight of the machine ca.: 4 t dimensions of the machine ca.: ca. 3 x 3 x 2,5 m No. 2213 Universal tool milling machine MAHO MH 800 T Working area: 800 x 450 x 500 (800 longitudinal / 450 vertical / 500 transverse) Drive: 5.5 kW Control: Heidenhain CNC 332 / TNC 355 Universal built-in rotary table Coolant device Chip tray Splash guard half cabin, tool clamp Technical documentation Tool holder ISO 40, Table clamping surface 600 x 900 m, max. table load 500 kg, quill stroke 80 mm Speed range 63 - 3150 rpm Feed rate 1 - 1500 mm/min Rapid traverse: 4.5 m/min Weight: approx. 4 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm total power requirement: 4 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2 x 3 x 3 m No. 2456 Universal tool milling machine MAHO MH 800 Working area: 700 x 450 x 450 Drive: 4 kW Digital display Mitutojo Universal built-in rotary table 1050 x 627 mm Quill feed gear 0.02 - 2 mm/rev Spindle ISO 40, Speed range 32 - 1600 1/min, feeds 5-500 mm/min, rapid traverse 1.4 (0.7) m/min Cross table movement by hand 225 mm, Table top rotation 360 ° Table swivel/tilting +- 30 ° each Space requirement approx. 2 x 3 x 3 m, Weight approx. 3.3 to. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mm y-travel: 800 mm z-travel: 800 mm Control: CNC 432 total power requirement: 22 kW weight of the machine ca.: 17 t dimensions of the machine ca.: 5 x 3,70 x 3 m Nr. 2754 Universal bed milling machine MAHO MH 1600 S Spindle SK-50, Speed range up to 4000 min-1 Max. workpiece weight 3000kg 35,000 switch-on hours, 10,0 0spindle hours, Dimensions 5 x 3.70 x 3 m, Weight 16 tonnes. Automatic swivelling milling head, Fixed table 1800 x 980 mm, 36-fold universal tool changer, Internal coolant supply with paper belt filter, chip conveyor, manual control bar. Working area: 1600 x 800 x 800 Drive: 22 kW Control: Philips CNC 432 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 500 mm z-travel: 500 mm Control: CNC 432 total power requirement: 10 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3 x 3 x 2,6 m No. 0052 Universal tool milling machine MAHO MH 700 C Working area: 700 x 500 x 450 Drive: 10 kW Control: Philips CNC-432 Fixed table Fully protected cabin with 3 sliding doors Tool holder: ISO-40. Speeds: 20-3150 min-1 Feed rate: 1-3000 mm/min, rapid traverse 6 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm total power requirement: 4 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2 x 3 x 3 m No. 1859 Universal tool milling machine MAHO MH 800 Working area: 700 x 450 x 450 Universal built-in rotary table 1050 x 627 mm, quill feed gear 0.02-0.2 mm/rev Spindle ISO-40, Speed range 32-1600 1/min, feeds 5-500 mm/min, rapid traverse 1.4 (0.7) m/min. Cross table movement by hand 225 mm, Table top rotation 360° Table swivels/tiltable +- 30° each. Space requirement approx. 2 x 3 x 3 m, Weight approx. 3.3 tons. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 375 mm z-travel: 250 mm table-size: 205 x 800 mm T-slots: 4 x 45 14 H7 speeds: 50 - 3150 U/min tool taper: 40 ISO quill stroke: 50,0 mm Feeds X + Z Axis: 5.0 - 1000 mm/min Feeds Y Axis: 5.0 - 670 mm/min rapid traverse: 2.4 / 1.6 m/min control: Heidenhain total power requirement: 5.1 kW weight: 950 kg range L-W-H: 1860 x 1790 x 1750 mm Machine from a vocational training center In good condition () Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN TNC 135 positioning/path control 3-axis manual data input control Programmable by the machine operator Convenient and easy operation - Electric motor-driven feed rates in all axes (X/Z/Y) X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min - Tiltable milling head to both sides - Tiltable T-slot universal table - Vertical c ...

MAHO MH 400 ist eine CNC Fräsmaschine hoher Präzision, für grosse Genauigkeit und Zuverlässigkeit. Rundtisch Ø400 mm; Wege X 400 mm, Y 375 mm, Z 350 mm; max. Werkstückgewicht 160 kg. Spindelaufnahme ISO40; Drehzahlen 20–3150 t/min; Anschluss 3x380 V 50 Hz; Leistung 9 kVA; Gewicht ~1600 kg; Abmessungen 1600×2200×1670 mm. Erreicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Medizintechnik, Uhrenbau, Werkzeugmaschinenbau. Technische Daten ohne Gewähr

MAHO MH 500 W ist eine Universalfräsmaschine für präzise Bearbeitungen mit hoher Genauigkeit und Zuverlässigkeit. Tisch 800×360 mm (5 T-Nuten 14 mm, Abstand 65 mm); Verfahrwege X500/Y300/Z400 mm; max. Werkstücklast 250 kg; Rundtisch Ø250 mm. Spindel ISO40, stufenlos 63–4000 t/min; Vorschübe 1–3000 mm/min (X/Y/Z); Eilgang 5 m/min; 3×380 V 50 Hz; 5 CV; Gewicht ~1700 kg; Maße 1700×1300×1800 mm. Zubehör: Rundtisch, Bohr-/Fräskopf, Lampe. Erreicht enge Toleranzen; Einsatz: Automotive, Uhren, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

MAHO MH 800 P - Tool Milling Machine - Recording: ISO40 - X/Y/Z: 700 / 450 / 500 mm - Occasionally problems with the measuring system due to contamination - Occasional failures during rapid traverse - in this case the machine must be switched off and on - Year of construction 1980 Technical data Main Gear: - Sliding gear geometrically stepped: 1.25 - Number of gears: 18 Horizontal & vertical milling spindle: - Speed range: 40 - 2000 rpm - Tool holder: ISO 40 - Tool clamping: hydromechanical - Quill stroke vertical/horizontal: 100 mm Quill feed gear (vertical): - Autom. Quill feeds: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Workspace (manual & automatic): - Longitudinal adjustment (X-axis): 700 mm - Vertical adjustment (Y-axis): 450 mm - Headstock (Z-axis): 500 mm Feeds: - Infinitely variable in X/Z: 10 - 500 mm/min - Infinitely variable in Y: 5 - 250 mm/m ...

Maho MH 1000 S X: 1000 - Y: 560 - Z: 800 mm CNC Max longitudinal travel X-axe: 1000 mm Max cross-travel Y-axe: 560 mm Max travel Z-axe: 800 mm Power on spindle: 15 kW Admission in boring head (ISO): ISO 50 Spindlespeeds: 2000 rpm Table size: 1250 x 800 mm Control: Philips 432 Length: 4600 mm Depth : 2500 mm Height: 2300 mm Weight: 7,5 ton Toolholder: yes

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 720 x 410 mm spindle turning speed range: 40 - 2000 U/min : mm/min feeds Z-axis: mm/min tool taper: SK 40 total power requirement: 3,0 kW weight of the machine ca.: 1,4 t dimensions: 1,8 x 1,6 x 1,9 m Milling machine with - Toolmakers table - Heidenhain digital readout - Rapid traverse - Coolant system - Central lubrication - Machine feet - incl. drawer unit with contents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine Maho MH 300P

Wilo High Pressure Centrifugal Pump Economy MHIE 203N-2/V/3-2-2G,G1/G1,0.75kW 4171765

MAHO Milling Machine MH400 - Mounting SK40 - With digital display - Brake motor for work spindles: 2.2 kW - X-axis: 400 mm - Y-axis: 375 mm - Z-axis: 250 mm - Width: 150 cm - Depth: 120 cm - Height: 180 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Key data: 600 mm, 400 mm, 400 mm

MAHO MH 600 E CNC milling machine – used, functional (only for commercial use) For sale is a MAHO MH 600 E CNC milling machine from 1989 in used condition. The machine shows signs of wear and tear according to its age, but is basically in functional condition and is currently under power, so that an inspection and demonstration during operation is possible at any time by arrangement. Technical data: Travels: X 600 mm / Y 450 mm / Z 450 mm Spindle speed: max. 4,000 rpm Tool holder: SK40 Condition / Notes: Machine running and ready for use All axes can be moved Control system functional Z-axis clearly audible during the process (according to the fitter's statement, not unusual for this type) Slipper clutch of the Z-axis is oily and should be replaced when the opportunity arises Note: Sale only to tradespeople Under exclusion of any warranty and guarantee N ...

x-travel: 500 mm y-travel: 350 mm z-travel: 380 mm table-size: 790x360 mm spindle turning speed range: 63-4000 U/min spindle taper ISO: 40 quill stroke: 50 mm range L-W-H: 1600x2000x1850 mm digital readout: PHILIPS weight of the machine ca.: 1.4 t Active Digital read out Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 210 mm z-travel: 340 mm table-size: 600 x 400 mm spindle turning speed range: 40-2000 U/min spindle taper ISO: 40 quill stroke: 60 mm range L-W-H: 1200x2000x1700 mm digital readout: PHILIPS weight of the machine ca.: 1.4 t Active Digital read out Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

8-color format: 70 x 100 cm<br><br><br><><<br>Verf Gbar: Instant

8 color size 70 x 100 cm<br><br><br><br>Available: immediately

The small laboratory press MHSP5 can perform very well with the round stamp (70 mm diameter) deformations of many materials. By delivering fine (0.5 mm per wheel revolution), deformations are carried out very accurately. Small punching or stamping operations are possible. The press is driven by a worm gear screw jacks, which requires minimal hand strength by high reduction ratio. The pressing frame consists of stable-dimensioned polyamide PA6G. Here are some technical data:-static force 5 KN (0.5 to) - portable presses frame made of polyamide PA 6 G, very stable design, with FEM program added - spindle manual jacks 20 mm, pitch 5 mm - with Handwheel diameter 120 mm and handle - gear ratio 1:10, per the Handwheel 0.5 mm screw - table size 235 195 mm - clearance width 190 mm - stamp size diameter 70 mm with 4 holes 8 mm for mounting a major stamp Very easy operation with spindle and w ...

Plate press - table press - Laboratory Press - Universal Press MHSP522 Press area 230 230 mm Clear width 200 mm Manual drive with worm gear screw jacks 5 KN Pressure 5 KN (0.5 tons) Weight 55 kg Per sensor revolution 0.5 mm path, this little manual force with great force, very fine deliverable. Pressing force is long maintained by self-locking.

Manual Heating Press Reitz MHSP5H - Manual Lifting Screw Press Static Press Force 5 KN (0.5 to) - Portable press frame made of polyamide PA 6G - Manual screw jack with spindle 20 mm, pitch 5 mm - With handwheel diameter 120 mm and handle - Gear reduction ratio 1 : 10, 0.5 mm spindle travel per handwheel revolution, thus only very little hand force required for high pressure. - Table size 100150mm - Clear width 60 mm - Punch size diameter 70 mm with 4 holes 8 mm to attach the Hotplate - Very easy operation due to spindle and worm gear - Total weight approx. 25 kg With 2 electric aluminum heating plates 1200 watts, heating area approx. 150 100 mm to 250°C, connection 230 V. With sensor and temperature control. Pressure-resistant insulating panels at the top and bottom for use in presses. Suitable for pressing, welding and gluing.

Technical data: Max height of 4,500 mm / 4,600 mm Maximum throat depth 4,500 mm / 4,000 mm Welding source ESAB, LCA1200 / ESAB TAF 1250DC Welding machine carrier 1 x without welding equipment broken demotiert Type: MH45. 2 / BODE DSCN 3109

Manufacturer: Homag CPU , Type: SPS II 12 MHz 1MB RAM, Serial number: 2-083-01-5044,

Ribbon system Covema-Schwabe Y.O.M. 1994 User manual with functional overview - Machine control elements - Program overview - Commissioning and storing removal Reel MHM 2 - hydraul. Spreading (motor 1.5 kW / 1500 U) - hydraul. Pressure roller - with drive max. coil weight - 2 t Coil outside through. - 1650 mm Coil inner throughm. - 350 - 460 mm Bandwidth - 400 mm Feed machine VRMA 32/96 Bandwidth 320 mm Straightening roller sifm. - 40 mm, 7 pcs Straightening head can be done by hydraul. to open Intermediate air central. Controller more info on request

XXL Large tire detwulster for OTR tires up to 1600 mm inner diameter! Mobile on rolling frame. Transport with unrolling tipper. Weight approx. 9500 kg, length approx. 6500 mm. Very good condition!

Yaskawa Robot Motoman MH180 We have a Yaskawa Robot Motoman MH180 7 axis, with a 16.6 m rail and table thta we are going to sell now

MHME twin lane decorer / florette machine - used for broccoli In good working condition

Fully automatic bread slicer MHS Type: MHS BASIC L Technical data: Cutting Gate Bread Slicer Cutting thicknesses: 10 mm Bread passage: H 17 cm x W 45 cm x D 34 cm Bread rack to bag 230 Volt / 0.75 kW / 3 A Weight: 200 kg Total dimensions: H 114 cm x W 59.5 cm x D 73 cm Mobile on 4 pulleys with 2 brakes Cuts almost all types of bread (including yeast braids) Soft feed for particularly gentle cutting Lubrication without oil pump Minimal maintenance costs due to high ease of maintenance Simply click out the used felt and dispose of it The new felt is simply hooked into the existing guide Year of Make: 2015 Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.

Brotschneidegatter, Fabr. MHS, model BM 45 NU

MIG/MAG hose package -MIG/MAG hose package: water-cooled -Length: 3.0 m -Weight: 3.1 kg

Key data: 13 KW

Manufacturer: Rexroth Model No.: MHD112C-035-PG3-BN 4000 min-1 Part No. 294649 IP: 65 13.3 kW 48 kg More engines new and used - you can find them in our shop! International shipping costs on request!

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Holch MHS 501-Super water-cooled -Length: 6.35 m -Weight: 5.1 kg

Drawer module Transfer and centering module Interchangeable 2-point double gripper standard Robot Cell Data: Dimensions (L x W x H) 2500 x 2000 x 2373 mm Dimensions: 5000 x 3000 mm Operating voltage: 3 x 400 V, 50 Hz Control voltage: 24 V DC Power consumption: max. 1.5 kVA Technical data robot control: Type: FS100 Dimensions (H x W x D) 470 x 200 x 420 mm Cooling system: indirect cooling Interface: USB interface (2.0), RS232C and LAN (100 Base-TX710 Base-T)

Key data: 250 mm, 1 t, 1200 mm

Sheet thickness max. 2 mm Largest belt width 250 mm Coil Outer Diameter 1200 mm Coil inner diameter 430 -550 mm Max. coil weight 2 x 1600 kg

Offer 24467 Specifications: - Max. pressing force 10 t - Max. ram stroke approx. 550 mm - Tool holder thread M 16 - Stand width approx. 1000 mm - Stand depth approx. 500 mm - Min. / max. installation height 450 / 1350 mm - Height-adjustable table - Space requirement approx. W 1600 x H 2650 x D 850 mm - Weight approx. 350 kg

Two identical screen printing machines are available, max. frame dimensions: 750x1100mm, compressed air connection: 8bar, indexer connected load: 2.5kW, squeegee connected load: 0.6kW, an on-site inspection is possible.

Offer 24482 Specifications: - Max. working width 1020 mm - Max. material thickness 4.0 mm - Cutting angle 2.4 ° - Single stroke – continuous stroke can be preselected -one. Back gauge up to 700 mm - Front angle stop - Front pull-out sheet metal support - Drive 400 V / 3.4 kW - Space requirement approx. W 1450 x H 1180 x D 1400 mm - Weight approx. 900 kg

MHG pressure blasting machine SMG 100-100 incl Dust Extractor 1703-1,5

sheet width: 125 mm coil weight: 2x 0,8 t coil internal dia.: 300-500 mm coil outside dia.: 1200 mm weight of the machine ca.: 0,7 t dimensions of the machine ca.: BxTxH 2000x2000x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.