maho mh used for sale

x-travel:1.250 mm y-travel:710 mm z-travel:710 mm table surface area:1500 x 800 mm table load capacity:800 kg turning speeds:12000 1/min spindle drive:15 / 10 kW control:MILLPLUS iT HEIDENHAIN spindle taper:SK 40 tool change unit:60 Pos. capacity:44 kVA weight of the machine ca.:10,5 t dimensions of the machine ca.:3,5 x 2,65 x 2,65 m 5 axis simultaneously machining center, B-axis (-120° / +30°), NC-rotary-table integrated in rigid table, direct measuring system, 3D probe infrared, HEIDENHAIN TS 640, internal coolant supply 40 bar, 600l, flushgun, chipconveyor, mode 4, 3D quickset software (no hardware), Higher noise in rush on X-axis and roundtable approx. 48.500 hours "machine on" / approx. 18.000 hours "spindle on"

machine ready for transport and to be assessed on viewing day. 5 additional loading meters for chip conveyor / cooling container / leveling feet and books Auction-ID: A1-44905-11

Auction-ID: A1-45166-13

BIG bale fork with gripper, Technical data typical for: MHFRED34HD, - Load capacity: approx. 1,800 kg, - Dead weight: approx. 300 kg, - Number of tines: 3 main tines (for better grip of large bales), Area of application: Round and square bales, silage, hay

https://winradio.com/home/g33wsm.htm Sale with the following accessories: 1x Winradio WR-G33WSM, Receiver external, USB 1x Power Supply 1x WR-G33WM adapter for XLR 4pin 1x WR-G33WM USB Adapter 1x antenna with stand Auction-ID: A7-45172-153

Equipped with: leveling boom, hydraulic quick coupler (Eurosteel HCWG2), 4x4 drive, extra hydraulic function on boom, air suspension seat, sliding blade, 6 cylinder Deutz diesel engine, excavator bucket, work lights, side storage compartment Auction-ID: A1-40133-22

Good condition Unaudited Auction-ID: A7-45427-192

Good condition Auction-ID: A7-45427-165

Auction-ID: A1-45762-96

Control panel for MAHO Fraea machine 500W with Heidenhain control TNC 232; New

Keyboard for Maho machines Philips 432/9. Please note: Board and pot are not included in the offer; New

Replacement TFT monitor for MAHO machines with control of Philips CNC 432. Suitable for MAHO CNC 432/10 Philips control machines. Front panel aluminum black powder coated High quality anti-reflective glass Dimensions 400 x 308 mm front panel Technical data: TFT-LCD monitor 12.1 inch Display/Aufloessung 800 x 600 pixel brightness 400 cd/m2 Contrast ratio 500:1 Response time 8 ms Frequency 60 hz Display area 246 x 185 mm External power supply 12V Operating temperature-10 ° c + 60 ° c Power consumption of 30 W Max D-Sub 9pin connector. 2 row OSD control brightness, contrast ratio, auto adjustment Install phase position, clock, language, reset Included accessories: power adapter, Achschlusskabel 15-pol. D-Sub 24 months warranty!

; NEW

CNC vertical machining center for machining metal parts. Numerical control: Siemens 810D Strokes: X 630 mm / Y 500 mm / Z 500 mm Table: 800 × 500 mm Maximum table load: 500 kg Spindle cone: ISO 40 Spindle speed: 10,000 rpm

ul> CNC control: Heidenhain TNC 530 5-axis (B-axis head ±90°, C-axis table 360°) Strokes: X = 1060 mm, Y = 710 mm, Z = 710 mm Spindle speed: 20 – 12,000 rpm Spindle power: 15 kW Cone: ISO40 Fast feeds: 30 m/min Table: 1500 x 795 mm Max table load: 900 kg Tool magazine: 32 positions Spindle centre coolant + refrigeration unit + mist suction Lots sold as is, unchecked, without tools or tool holders.

Machine is disassembled into dimensions of truck, mega trailer needed for transport. 13 Loading Meter Machine pick-up by appointment, loading not possible on pick-up days Auction-ID: A1-44905-108

Sold with various tools and documentation. Technical Information Main training Maximum speed: 9,000 rpm Motor: AC Servo Motor 100% ED engine power: 4.96 kW Engine power at 40% ED: 6.94 kW Continuously programmable speed: 20 – 9,000 rpm Torque/power diagram Speed range: 20 – 9,000 rpm Axis drive AC servo motors for X, Y, Z axes Programmable feed rate: up to 10,000 mm/min Input Unit: 0.01 mm Fast (fast) speed: 12 m/min Measurement system X, Y, Z axis resolution: 0.001 mm Position Tolerance (Direct Measurement): 0.010 mm Work Area X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Work table Round table with swivel axis Clamping surface: Ø 700 x 500 mm T-slot spacing: 63 mm T-Slot Width: 14 H7 Centering bore: Ø 30 H7 Rotation range: 360° Table lock ...

CNC vertical machining center for machining metal parts. Numerical control: Siemens 810D Strokes: X 630 mm / Y 500 mm / Z 500 mm Table: 800 × 500 mm Maximum table load: 500 kg Spindle cone: ISO 40 Spindle speed: 10,000 rpm Auction-ID: A1-44765-248

machine Manufacturer: DECKEL MAHO Type: DMU 35 M Year of Make: 2001 Machine type: CNC universal milling center (3+2 axes) data Feed drive: AC servo motors for X, Y, Z axis Feed speed X/Y/Z: infinitely programmable up to 5,000 mm/min Rapid traverse X/Y/Z: 5 m/min Input unit X/Y/Z: 0.001 mm Work table: rotary table with swivel axis Clamping surface: 400 × 280 mm T-slot spacing / size: 50 / 12 H7 Centering bore: Ø 30 H6 Rotary table rotation range: 360° Desktop clamping: mechanical Swivel range: 105° / 15° Permissible load rotary table (centre of the table): 100 kg Dimensions Travel X/Y/Z: 350 × 240 × 340 mm Weight: approx. 1,700 kg Electrical details Voltage: 400 V Power: approx. 15 kVA Auction-ID: A7-45416-2143

Cabinet dimensions: H: 2000 W: 600 L: 1000 Auction-ID: A7-45416-101

Auction-ID: A7-45416-2157

MAHO MH 500 E2 CNC universal milling machine with dialog control Manufacturer: MAHO AG, Pfronten (Germany) Model: MH 500 E2 Serial Number: 53855 Control: Philips / Heidenhain Dialog (older version) Design: Vertical milling machine with cross table Cladding: Machine enclosure with front door, plexiglass Table size: approx. 700 x 400 mm (estimated) Travels: X/Y/Z estimated approx. 500 x 350 x 400 mm Spindle holder: ISO/SK40 (common for this type) Connection: 3 x 400 V, coolant connection available Condition: • Used, functionally complete • Screen, emergency stop, controls available • Control not tested • Spindle & table mechanically complete Auction-ID: 038-WFW-5

MAHO M800 CNC Milling Machine Manufacturer: MAHO Model: M800 Type: Vertical CNC Milling Machine with Rotary Table Condition: Used – working overall condition, but uncleaned, with no known malfunctions Year: Not known (estimated: late 1980s – early 1990s) Technical data (as far as known): • Travels: X ≈ 500 mm / Y ≈ 400 mm / Z ≈ 400 mm (estimated, please check) • Rotary table with T-slots • Spindle mount: ISO or SK (please check exact standard) • Control via separate control panel • Coolant connection available • Doors with viewing windows (safety glazing) Auction-ID: 038-WFX-5

Heidenhain TNC 426/430M control Racing and Board: X-axis (longitudinal): 1,000 mm Y-axis (Transverse): 600 mm Z-axis (Vertical): 600 mm Table surface: 1,200 x 600 mm Maximum Table Load: 800 kg Speed 10,000 rpm (belt or direct drive) Tool Mount: SK 40 / BT 40 Spindle power: approx. 9 - 13 kW (S1/S6) Torque: ~82 Nm Fast Feeds: 30 m/min (X/Y/Z) Tool magazine: 24 spaces (basket or chain configuration with exchange arm) Tool Change Time: ~1.6 - 2.5 seconds (T-to-T) Total Weight: approx. 6,500 kg Floor space approx. 3,500 x 2,400 x 2,800 mm TOOLS NOT INCLUDED Auction-ID: A7-44885-2

CNC control: Heidenhain TNC 530 Machine 5 simultaneous axes Strokes: X = 730 mm, Y = 560 mm, Z = 560 mm Spindle speed: up to 12,000 rpm Cone: SK40 Feeds: 20 – 20,000 mm/min Fast feeds: 30 m/min Table: 1000 x 600 mm Max load table: 800 kg Tool changer: 24 / 30 positions Machine hours≈ 31,481 h Spindle hours≈ 25,087 h Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-44765-203

CNC vertical machining center for machining metal parts. Numerical control: Heidenhain TNC 426 (3D) Strokes: X 1,000 mm / Y 600 mm / Z 600 mm Table: 1,250 ×,800 mm Tool changer: 30 positions Spindle taper: SK 40 (DIN) Spindle speed: up to 15,000 rpm Spindle motor power: 18 / 15 kW IKZ / CTS: 40 bar Equipment: Chip conveyor, air blowing, closed cab Auction-ID: A1-44765-243

ul> CNC control: Heidenhain TNC 530 5-axis (B-axis head ±90°, C-axis table 360°) Strokes: X = 1060 mm, Y = 710 mm, Z = 710 mm Spindle speed: 20 – 12,000 rpm Spindle power: 15 kW Cone: ISO40 Fast feeds: 30 m/min Table: 1500 x 795 mm Max table load: 900 kg Tool magazine: 32 positions Spindle centre coolant + refrigeration unit + mist suction Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-44765-207

DMG MORI DMU 50 – 5-axis CNC machining center Manufacturer: DMG MORI / Deckel Maho Type: DMU 50, year of construction approx. 2013 5-axis machining center (simultaneous)CNC control: Siemens Sinumerik (ERGOline Panel) Travel: approx. X 500 mm / Y 450 mm / Z 400 mm Spindle: up to approx. 10,000 rpm, tool holder SK40 Tool magazine: approx. 30 places (chain magazine) incl. approx. 25 tool holders (used) Spindle condition good, machine accuracy good Operating hours: approx. 28,000 h Machine functional, currently energized Coolant system available Chip conveyor available Complete machining center incl. peripherals Ideal for 5-axis machining in tool and mould making as well as general machining Auction-ID: 04K-92D-1

DMG MORI DMU 50 – 5-axis CNC machining center Manufacturer: DMG MORI / Deckel Maho Type: DMU 50, year of construction approx. 2013 5-axis machining center (simultaneous)CNC control: Siemens Sinumerik (ERGOline Panel) Travel: approx. X 500 mm / Y 450 mm / Z 400 mm Spindle: up to approx. 10,000 rpm, tool holder SK40 Tool magazine: approx. 30 places (chain magazine) incl. approx. 25 tool holders (used) Spindle condition good, machine accuracy good Operating hours: approx. 28,000 h Machine functional, currently energized Coolant system available Chip conveyor available Complete machining center incl. peripherals Ideal for 5-axis machining in tool and mould making as well as general machining

MAHO MH 500 E2 CNC universal milling machine with dialog control Manufacturer: MAHO AG, Pfronten (Germany) Model: MH 500 E2 Serial Number: 53855 Control: Philips / Heidenhain Dialog (older version) Design: Vertical milling machine with cross table Cladding: Machine enclosure with front door, plexiglass Table size: approx. 700 x 400 mm (estimated) Travels: X/Y/Z estimated approx. 500 x 350 x 400 mm Spindle holder: ISO/SK40 (common for this type) Connection: 3 x 400 V, coolant connection available Condition: • Used, functionally complete • Screen, emergency stop, controls available • Control not tested • Spindle & table mechanically complete

Sold with various tools and documentation. Technical Information Main training Maximum speed: 9,000 rpm Motor: AC Servo Motor 100% ED engine power: 4.96 kW Engine power at 40% ED: 6.94 kW Continuously programmable speed: 20 – 9,000 rpm Torque/power diagram Speed range: 20 – 9,000 rpm Axis drive AC servo motors for X, Y, Z axes Programmable feed rate: up to 10,000 mm/min Input Unit: 0.01 mm Fast (fast) speed: 12 m/min Measurement system X, Y, Z axis resolution: 0.001 mm Position Tolerance (Direct Measurement): 0.010 mm Work Area X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Work table Round table with swivel axis Clamping surface: Ø 700 x 500 mm T-slot spacing: 63 mm T-Slot Width: 14 H7 Centering bore: Ø 30 H7 Rotation range: 360° Table lock ...

CNC control: Heidenhain TNC 530 Machine 5 simultaneous axes Strokes: X = 730 mm, Y = 560 mm, Z = 560 mm Spindle speed: up to 12,000 rpm Cone: SK40 Feeds: 20 – 20,000 mm/min Fast feeds: 30 m/min Table: 1000 x 600 mm Max load table: 800 kg Tool changer: 24 / 30 positions Machine hours≈ 31,481 h Spindle hours≈ 25,087 h Lots sold as is, unchecked, without tools or tool holders.