maho mh 500 used for sale

Cutting width of up to 5000mm - used for cutting carpets - Width is adjustable (computer controlled) - Everything seen and tested in working condition - also remains until disassembly so that testing can be done before disassembling the machine. For questions about the machine, please send an email to info@troostwijkvavato.com stating the auction number and lot number. Auction-ID: A3-43519-16515

Machine number: 32099/90 BE Drive power: 8.5 kW Electrical connection: 380 V, 50 Hz for deburring various elongated components Lengths from 200 mm to approx. 900 mm (without guarantee) incl. extraction Auction-ID: A7-46287-168

Working width 5000mm - Adjustable width cutting blades (computer controlled) - Everything seen and tested in working condition - also remains in place until disassembly so that testing can be done before disassembling the machine. For questions about the machine, please send an email to info@troostwijkvavato.com stating the auction number and lot number. Auction-ID: A3-43519-16516

3 UNITS/SETS OF SDM0030 PACKED TOGETHER. A SINGLE SDM0030 CORRESPONDS TO: Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from \"0\"). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. Machine condition: unchecked. Approx. Transport dimension: LxWxH 745 x 350 x 145 mm; Approx. Weight: 7kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x SDM0030 PACKED TOGETHER: 745 x 1050 x h145 ...

Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 450 x 185 mm; Approx. Weight: 116kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-85

Pressure 5000 Kg (150x200 mm), Material: cast iron, Jaw width: 150 mm, Jaw height: 50 mm, Maximum opening: 200 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 480 x 200 x 180 mm; Approx. Weight: 32kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-165

3 UNITS/SETS OF ATT0010 PACKED TOGETHER. A SINGLE ATT0010 CORRESPONDS TO: Pressure 5000 Kg (150x200 mm), Material: cast iron, Jaw width: 150 mm, Jaw height: 50 mm, Maximum opening: 200 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 480 x 200 x 180 mm; Approx. Weight: 32kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0010 PACKED TOGETHER: 480 x 600 x h180 mm - 96 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-262

Serial number: A-0448 Load capacity: 500 kg Reel diameter: approx. 1300 mm Auction-ID: A7-46287-148

3 UNITS/SETS OF ATT0010 PACKED TOGETHER. A SINGLE ATT0010 CORRESPONDS TO: Pressure 5000 Kg (150x200 mm), Material: cast iron, Jaw width: 150 mm, Jaw height: 50 mm, Maximum opening: 200 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 480 x 200 x 180 mm; Approx. Weight: 32kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0010 PACKED TOGETHER: 480 x 600 x h180 mm - 96 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-53

Pressure 5000 Kg (150x200 mm), Material: cast iron, Jaw width: 150 mm, Jaw height: 50 mm, Maximum opening: 200 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 480 x 200 x 180 mm; Approx. Weight: 32kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-307

Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from \"0\"). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. Machine condition: unchecked. Approx. Transport dimension: LxWxH 745 x 350 x 145 mm; Approx. Weight: 7kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-278

Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 450 x 185 mm; Approx. Weight: 116kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-154

The Lora Pergola is ideal for luxury villas, hotel terraces and restaurants looking for a year-round outdoor solution, this model offers motorized blinds on two sides controlled by remote control. Key features and benefits Remote control: The slats are opened and closed by simply pressing a button via the remote control. Precise adjustment: You can precisely determine the angle of inclination of the slats to dose the amount of sun or completely close the roof in case of rain. Reinforced construction: Uses 150 x 150 mm square posts and wider double-layer slats that ensure exceptional strength. Wind: Certified resistance to winds of up to 35 m/s (approximately 120 km/h). Innovative drainage and electricity system: The posts are designed so that the water and electrical channels are separate. This allows cables to be hidden inside the post for a cleaner aesthetic and greater safety. Adjus ...

3 UNITS/SETS OF ATT0039 PACKED TOGETHER. A SINGLE ATT0039 CORRESPONDS TO: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 450 x 185 mm; Approx. Weight: 116kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0039 PACKED TOGETHER: 650 x 1350 x h185 mm - 348 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-129

The Lora Pergola is ideal for luxury villas, hotel terraces and restaurants looking for a year-round outdoor solution. Key features and benefits Remote control: The slats are opened and closed by simply pressing a button via the remote control. Precise adjustment: You can precisely determine the angle of inclination of the slats to dose the amount of sun or completely close the roof in case of rain. Reinforced construction: Uses 150 x 150 mm square posts and wider double-layer slats that ensure exceptional strength. Wind: Certified resistance to winds of up to 35 m/s (approximately 120 km/h). Innovative drainage and electricity system: The posts are designed so that the water and electrical channels are separate. This allows cables to be hidden inside the post for a cleaner aesthetic and greater safety. Adjustable ventilation and light: The upper slats are adjustable, allowing precise  ...

5000 ANSI Lumens, 1024x768 XGA, 3LCD; Video signal input: DVI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: White Auction-ID: A7-46311-23

5000 ANSI Lumens, 1,920x1,200 WUXGA, DLP; Video signal input: HDMI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: White Auction-ID: A7-46311-32

5000 ANSI Lumens, 1,920x1,200 WUXGA, DLP; Video signal input: HDMI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: White; Dimensions box: 59x49x26 cm (L/W/H), total weight: 14 kg Auction-ID: A7-46311-29

5000 ANSI Lumens, 1,920x1,200 WUXGA, DLP; Video signal input: HDMI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: White; Dimensions box: 59x49x26 cm (L/W/H), total weight: 14 kg Auction-ID: A7-46311-28

Technical Specifications Height of the tips: 500 mm Center spacing: 6000 mm Maximum turning diameter on bench: 1000 mm Maximum turning diameter on carriage: 310 mm Bar passing: 150 mm Accessories: Rapid feed on carriage ; Fixed steady rest ; Platform Item sold in unverified status Auction-ID: A1-44614-12

5000 ANSI lumens, 1,920x1,080 Full HD, DLP; Video signal input: HDMI, HDBaseT; electrical connection: 100-240 V - 50/60 Hz; Colour: Anthracite Auction-ID: A7-46311-18

5000 ANSI Lumens, 1,920x1,200 WUXGA, DLP; Video signal input: HDMI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: White; Dimensions box: 59x49x26 cm (L/W/H), total weight: 14 kg Auction-ID: A7-46311-31

Eppendorf Mastercycler Gradient 5331, 500W with power cord Unaudited Auction-ID: A7-46327-108

5000 ANSI lumens, 1,920x1,080 Full HD, DLP; Video signal input: HDMI, HDBaseT; electrical connection: 100-240 V - 50/60 Hz; Colour: Anthracite Auction-ID: A7-46311-17

Hilti Te 500 AVR Chisel Hammer Demolition Hammer Auction-ID: A7-46327-72

5000 ANSI Lumens, 1,920x1,200 WUXGA, DLP; Video signal input: HDMI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: White; Dimensions box: 59x49x26 cm (L/W/H), total weight: 14 kg Auction-ID: A7-46311-30

9500 ANSI Lumens, 3,840x2,160 4K UHD, DLP; Video signal input: HDMI, SDI, HDBaseT; electrical connection: 100-240 V - 50/60 Hz; Color: Black; Transport crate dimensions: 90x72x47 cm (L/W/H), total weight: 81 kg Auction-ID: A7-46311-9

Unused ; UWM 500 welding manipulator ; MIG/MAG CO2 and TIG ; capacity vertical 500 kg ; horizontal capacity 250 kg ; tiltable up to 135° ; table diameter 550 mm ; rotation speed 0–5 rpm ; 230 V ; foot control ; Machine weight approx. 220 kg Auction-ID: A1-45170-15

General overhauled, new seals etc. Auction-ID: A1-46315-42

Steel construction - mezzanine, 500kg/m2, approx. 2,000 m2 available - used - : Price from location: now only 79,000 € instead of 130,000 € (net), dismantled, packed and loaded. Particleboard is available for about 60% of the area – but in not so good condition! Manufacturer: Pro Man Type: Mezzanine Year of Make: 2007 Max. stage load: 500kg/m2 Floor height (upper edge of floor covering): 3,462mm Bottom edge beam: 3,230mm Dimensions: 71,000 mm x 28,000 mm. approx. 1,988 sqm OK Platform: 3,462 mm UK Stage: 3,220 mm Flooring 38 mm chipboard 1 pallet transfer station Wheelbase: 4 x 4m Stage covering was partly chipboard (38mm), partly gratings Bottom edge chipboard: white Condition: very good Available: immediately Location: Niedernberg near Aschaffenburg There are additional costs for the buyer: new screws, etc. Accessories (stairs, railings, pallet tr ...

Original LINCK chain conveyor with steel carriers length A-A approx. 6,500 mm