maho mh 500 used for sale

Kat-No 09-1017 New Mash tanks made of V2A with agitator and cooling jacket with 4 x feet, very stable version • with manhole front DN 430 x 310 mm • with residual outlet DN 90 mm (DIN 11851) • with threaded connection connector DN 95 mm top floor "with stable agitator with 5 paddles refurbished • with cooling jacket with 2 x cooling zones - OBEN: 750 mm wide - UNTEN: 500 mm wide • with 2 x transport eyelets • with tap flap DN 37 mm Dimensions: Diameter Zyl:1600 mm Total diameter: 1800 x 1800 mm Total height:4000 mm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delive ...

Offer of a drive-in shelf with about 500 parking spaces. Max load per pallet approx. 800 kg More information against request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error a ...

Cold water set make Combitherm Germany, water-cooled, cca.400Kw.with 2 pcs. Screw compressor Bitzer Type CSH 7571-90Y, refrigerant R 407C, two circles 50/50%, with control Digital uwm. Y.O.M.2005.Little used.state like new. Model KWW 7500 R407C

Offer shelf storage: 500 plots Storage weight up to about 1 ton per pallet. The pictures are vopn of a similar plant. Very good condition can still be visited. We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded.  ...

Cat.-Nr. 11-2625 new Cat.-Nr. 11-2625 Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Tested up to 3,4 bar – working pressure + 2,0/- ,015 bar Upper Bottom: with strong stackable crown with manhole lid DN 400 with 6 x Screws with 1 x overpressure valve with 1 x CO² venting valve Cylindrical Body: with 4 x reinforcing rings for better pressure resistance Lower Bottom: with outlet DN 50 with conical bottom with 4 strong feet can be moved from all sides with forklift / truck pallet Measurements and Weight: Total Height: 1520 mm Diameter: 800 mm Weight: 92 kg Surcharges / each: Fermentation Lock DN 50 Sample Valve Blind Cap DN 50 Fermentation Fittings CIP Cleaning System The price is for one tank. The tank is also available in 300 litres. The price is 1535€ for one  ...

Cat.-Nr. 11-1045 Capacity: 500 up to 1000 Litres COMPLETE For producing juice and filling in from fruits and vegetables For Washing/Grinding, Pressing, Storing, Pasteurizing, Filling Complete Production Line with following machines: Cat-Nr 10-2346 - Eurolux Big-Box Dumper for emptying fruits and vegetables from wood or OVC boxes LxWxH: 1680 x 1480 x 1220 mm Cat-Nr 10-2347 – Eurolux Wash and Grinding Mill Unit Capacity: 2000 kg/h - Motor Power: 3,0 kW Cat-Nr 10-2337 – Eurolux Automatic Continuous Belt Press EL-500 for producing fruit juice and fruit wine, cider from apples, pears Capacity: 500 up to 1000 kg/h Cat-Nr 06-1101 – Eurolux Floating Lid Tanks 2 x 1000 Litres Floating Lid Tanks 2 x 500 Litres Floating Lid Tanks 2 x 300 Litres Floating Lid Tanks Cat-Nr 10-2350 – Eurolux Pasteurizing Machine EL-1500 with Plate Heat Exchanger Capacity: 10 ...

Ladies and gentlemen, in the offer is an investment that could be suitable for an online mail order business. approximately 20,000 or more shipments per day. If you are interested, please contact us. Pictures and plans of the plant are available. Intermediate sale and error are excluded. Yours sincerely Trade & Translations

Damrow Double-0 5,000 litre cheesevat. Closed model, CIP cleanable. With Build-in wheydrain suitable for production from Mozerella, Gouda, Tilsit, cheddar, etc. 1x double walled no leaks 1x single wall In good condition. 2 pieces available.

Kat. No. 12-2155 in a very good condition max. working pressure allowed: 1,8 bar max. temperature allowed: 130°C DxH: 1800 x 5000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

We have 500 kg Schraubnaegel, nails, screws, deck pencils on camp. are used, above all, in carpentries and in the palette construction. -for especially good hold. length 38 mms and 68 mms also to sell kilo way with questions all around the nails we stand to you with pleasure any time under the telephone number 09945 417 or by e-mail: autoteilekollmer@t on-line at the possession.

tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...

Kragarmregal, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,295.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 each. Arms 1.20 m, 500 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf armseached carrying capacity at load centre 600 mm 500 kg per arm / 2610 kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 4,16m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.850.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 4160mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per stem with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 3,50m height, 1,20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 staenders 1.750.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 3.50m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 3500mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

used approx. 2.5 m³ / 2,500 litres polyester tank / GRP tank, transportation tank, Juno-tank, good condition Dimensions: L = 2.25 m; Ø = 1.30 m; H = 1.55 m (including bases) Aboveground, tank, incl. 2 steel bases, dome on the front, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks ...

Collar shelving, double-sided, 5, 18 m high, 1, 20 m arms, 500 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR2.295.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided measures 5.18 m, hot-dip galvanized IPE 180 / 80 with each 2 x 3 verstellb. Poor 1.20 m, 500 kg load capacity per arm with associations about 1.30 m Shelf stand double-sided about 5180 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2610 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!

Collar shelving, double-sided, 4, 16 m high, 1, 20 m arms, 500 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR1.850.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided about 4, 16 m high, hot-dip galvanized IPE 160 / 80 with each 2 x 3 verstellb. Poor 1.20 m, 500kg load capacity per arm with associations about 1.30 m Shelf stand double-sided about 4160 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2250 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!

Collar shelving, double-sided, 3, 50 m height, 1, 20 m arms, 500 kg per arm - new -: Price from site including loading! 1 shelf unit with 4 stand EUR1.750.-(net)! A cantilever rack system, hot-dip galvanized, consisting of: 4 shelf stand double-sided 3, 50 m high, hot-dip galvanized IPE 160 / 80 with each 2 x 3 verstellb. Poor 1.20 m, 500kg load capacity per arm with associations about 1.30 m Shelf stand double-sided approx. 3500 mm high, hot-dip galvanized Foot and arm depth 1200 mm with 3 adjustable shelf arms Load capacity at load Centre 600 mm 500 kg each arm / 2250 kg per stand with longitudinal and diagonal associations e = 1300 mm When a shelf set with 4 stands approx. 4000 mm long with all bolts and nuts, without ground anchor. Other configurations (frame height, arm length, arm types etc.) can be selected. Please speak to us! Photos of a similar rack!

; ready for operation

Manufacturer: Busch Type: Mink MI 1502 BV Engine: 9.2 KW ; DS 400V Status: Used, Partial overtaking Performance: 6 months Suction power: 500 m3/h final pressure: approx. 250 mbar (abs.) Geraeusch Level: 85 dBa Zubehoer: additional suction filter (changed) ; Operating manual Delivery time: approx. 1-2 Where.; ready for use

Installation consisting of 2 lifting tables (in the form of a staircase) each with 1,500 kg load capacity, lifting height: 1.2 m each, incl. base for the higher lifting table (1.5 m high), hydraulic unit and control cabinet. Tables can also be used individually.

Rectangular, stackable transport container in stainless steel 1.4301, filling volume: 500 l., permissible total weight: 1,197 kg, inlet: 560 mm , outlet via manifold with flange (without ball valve). Minimum wall thickness: 1.5 mm.

Attachment pocket filter with 12 m2 filter area (12 pockets, 500 mm x 1,100 mm each), 1.5 kW fan (1,500 m3/h) and jet cleaning, flange dimensions: 1,230 mm x 630 mm. Multiple identical units available.

Manufacturer: Risco Intestinal holding device of the company RISCO: Intestinal holding device type RS 153 for filling machine RS 1040 , RS 4000, RS 4001, RS 5001 Extra accessories: holding rollers, filling tube, mounting kit Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko biala USt-IdNo.: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

approx. 1500 m2 steel construction stage 1-storey Used goods, good condition, see pictures Manufacturer STOW Length approx. 58.5 m Width approx. 54.6 m Height lower edge 3.4 m Height top edge 3.7 m Load 500 kg/m2 C-Profiles and Sigma Profile Design fastened with screws and nut Grid distances adjustable in length Floor structure is 38 mm chipboard, highly compacted, groove and spring Underside white, top grey coated Negotiation price: Offer on request! Partial sale possible! Disassembled and loaded Goods are in stock. Transport costs possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from s ...

Cell wheel lock made of noble steel unused KREISEL Environmental Technology Type: ADG 630 x 800 x 21-24 Z Built: 2005 Inlet opening: approx. 800 x 500 mm Outlet opening: approx. 800 x 500 mm Cell wheel diameter: 630 mm Number of cells: 12 Cell depth: approx. 200 mm Cell wheel made of stainless steel Housing made of steel Geared motor : SEW-EURODRIVE Type :RF107 AR132S/MWEX/II3GD DV132M4/TFII36D 7.5 kW 24 rpm 230/400 V IP65 Motor Ex protected! Total dimensions: approx. 2700 x 800 x 800 mm

Bandwidth / strip width 1,500 mm Strip thickness / strip thickness 0.4 - 1.5/2.0 mm Number of straightening rollers / no. of straightening rolls 6 pcs./no. Number of feed rollers / no. of feeding rolls 4 pcs./no. Longitudinal shears 3 pairs Speed 20 m/min Cross shears 1,500 x 2.0 mm Straightening rolls 100 mm Foil coating on top / foil coating on top

Technical data : Bandwidth / strip width 1,500 mm Strip thickness / strip thickness (420 N/mm2) 0.5 - 2.0 mm Coil weight 7,000 kg Longitudinal sections • 2 mm: 4 pcs. • 1.5 mm: 8 pcs. • 0.6 mm: 10 pcs. Shranded. / speed 20 m/min Length tolerance / length tolerance ± 0.5 mm Power / power 19.5 kW

screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 62 mm injection shot weight in Polysterol: 903 g/PS closing pressure: 3300 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 84 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 440 kN volumn: 1660 volt: V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Expanded In rotating condition due to new motorization wirt sold and pictured

Engine A1050024 Motor for BOFA suction systems: Type: AD 500 IQ, AD 1000 IQ , AD 1500 IQ Engine A1050024 MA-201067 New original engine

500L EMULSIFYING MACHINE 1. Capacity: 500KG/batch 2. Agitator: 5HP x 415V x 50Hz x 4P. TECO induction motor. Output speed 0 to 110 RPM. 3. Tank: Full capacity 640L, Mixing capacity 150 to 500L, SUS 304 heater 6kx4 unit. Max product heating temp 950C 4. Lobe pump: 2HP x 415V x 50Hz x 4P speed 1500L/Hr 2 bar. 1000L EMULSIFYING MACHINE 1. Capacity: 1,000KG/batch 2. Agitator: 7.5HP x 415V x 50Hz x 4P. TECO induction motor. Output speed 0 to 120 RPM. 3. Tank: Full capacity 1300L, Mixing capacity 300 to 1,000L, 4. Lobe pump: 2HP x 415V x 50Hz x 4P speed3000L/Hr 2 bar. 5. Material machine: Contact Part (inside tank) SUS 316, others SUS 304 6. Thickness: ≥3mm

Chemineer Ltd PD5M mixing tanks Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph

Chemineer Ltd PD5M mixing tanks Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph

Fully refurbished intensive annular tray mixer with 1,500 l. net batch capacity and 1,000 l. hardened concrete output. The mixer is equipped with 2 agitators which are driven by the main drive, and with 1 discharge gate.

Technical data: - Year of manufacture 2009 - transport length: 2.500 mm - working width, usable: 1.300 mm - Roller length 1,450 mm - Working height: 900 +-20 mm - Roll diameter: 64 mm - roller pitch: 125 mm - Feed rate adjustable (manual): 3-15 m/min - Installed power: 0,37 KW - Producer Superfici Elmag - Year of construction 2009 - Location, in stock

Technical data: - Year of manufacture 2009 - transport length: 2.500 mm - working width, usable: 1.300 mm - Roller length 1,450 mm - Working height: 900 +-20 mm - Roll diameter: 64 mm - roller pitch: 125 mm - Feed rate adjustable (manual): 3-15 m/min - Installed power: 0,37 KW - Producer Superfici Elmag

Key data: 4200 mm, 1090 , 70

Screw diameter: 70 mm Injection weight in polystyrene: 1090 g Clamping force: 4200 kN Screw diameter: 70 mm Stroke volume: 1212 cm³ Injection weight in polystyrene: 1090 g/hp Injection pressure: 1,877 bar Clamping force: 420 t Lights Tie bar spacing H x V: 810 x 710 mm Tool installation height - min.: 380 mm Opening distance: 710 mm Microprocessor control: NC4 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 45 kW Total connected load: 82.4 kW Total weight: 20,000 kg Total size: 7.9 x 2.3 x 2.5 m Payment terms: 100 % before taking over the machine, net only

Key data: 3500 mm, 810 , 60

Screw diameter: 60 mm Injection weight in polystyrene: 810 g Clamping force: 3500 kN Screw diameter: 60 mm Stroke volume: 891 cm³ Injection weight in polystyrene: 810 g/hp Injection pressure: 2,420 bar Clamping force: 350 t Lights Tie bar spacing H x V: 720 x 720 mm Tool installation height - min.: 350 mm Opening distance: 730 mm Microprocessor control: NC5 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 55 kW Total connected load: 78.1 kW Total weight: 17,300 kg Total size: 7.4 x 2.0 x 2.4 m Payment terms: 100 % before taking over the machine, net only

Key data: 2500 mm, 521 , 55

Screw diameter: 55 mm Injection weight in polystyrene: 521 g Clamping force: 2500 kN Screw diameter: 55 mm Stroke volume: 570 cm³ Injection weight in polystyrene: 521 g/hp Injection pressure: 2,470 bar Clamping force: 250 t Lights Tie bar spacing H x V: 630 x 630 mm Tool installation height - min.: 300 mm Opening distance: 550 mm Microprocessor control: Selogica direct Screen text: German Instruction manual: German FHK interface for robots: Euromap 67 Core pull: 1 x Without material hopper / Without water battery: -/- all-electric injection moulding machine Total weight: 14,500 kg Total size: 6.7 x 2.1 x 2.3 m Payment terms: 100 % before taking over the machine, net only

Key data: 3200 mm, 287 , 50

Screw diameter: 50 mm Injection weight in polystyrene: 287 g Clamping force: 3200 kN Screw diameter: 35 or 50 mm Stroke volume: 141 /314 cm³ Injection weight in polystyrene: 154 / 287 g/hp Injection pressure: 2,500/1280 bar Clamping force: 320 t Lights Tie bar spacing H x V: 720 x 720 mm Tool installation height - min.: 300 mm Opening distance: 600 mm Microprocessor control: Selogica direct Screen text: german Instruction manual: german FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- all-electric injection moulding machine Total weight: 14,500 kg Total size: 6.5 x 2.1 x 2.2 m Payment terms: 100 % before taking over the machine, net only

Metal band saw blade, band saw blade, metal saw band -Metal saw band: unused -Dimensions: 5000 x 34 x 1.07 x 2/3 - VPVR -Weight: 1.4 kg

Lippert roller cam right or left 90°-570-500 IR765 RA1820 Make: Lippert Running direction: 90° right running/ left running Roller width (RB): 500 mm conical, plastic coating Nominal/outer width (NB): 570 mm Inner radius (IR): 765 mm Side guides included on both sides Scope of delivery: without supports (please enquire if required) Optional Features: Running direction: links/ rechts Construction year: 2012 Antrieb: 2 Stück nominal voltage: 24V condition: good (used) Nominal / inner radius in mm: 765 Nominal / outside width in mm: 570 Roll width in mm: 500 angle: 90° Driven: YES Engine type: Trommelmotor KW: - Ampere: - Conveyor speed m / s: regelbar scope of delivery: including side guides without supports For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to  ...

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: 1.5 Nm -Speed: 0-500 rpm -Shaft: Ø 19 x 30 mm -Construction: B5 -Dimensions: 230/230/H200 mm -Weight: 10.5 kg

Linear drive, linear gear, screw jack, spindle drive -Manufacturer: ORIGA -Type: P120 SO -Stroke: max. 500 mm -Piston: Ø 40 mm -pneumatically operated -p. Max. Pressure 8 bar -Number: 8x cylinders available -Price: per piece -Dimensions: 800/70/H100 mm -Weight: 5 kg

High Speed Counter 25/500 kHz, PLC control, counter module, counter assembly -Manufacturer: Siemens, Simatic S5 High Speed Counter 25/500 kHz Ovp -Type: 6ES5 385-8MB11 -Number: 3x High Speed Counter available -Price: per package -Dimensions box: 140/110/H60 mm -Weight: 0.3 kg/piece

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: TA 8.5 Nm -Speed: 500 rpm -Shaft: Ø 24 mm -Construction: B3 -Number: 3x available -Price: per piece -Dimensions: 320/235/H185 mm -Weight: 23 kg

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Performance: TA 2.0 Nm -Speed: 500 rpm -Shaft: Ø 24 mm -Construction: B3 -Number: 1x available -Price: per piece -Dimensions: 285/235/H176 mm -Weight: 16.5 kg