maho mh 500 used for sale

Breadcrumb grater/mill, Fabr. Fomko, Grating Machine 500

Absolutely new belt dryer make New Eco Tec Woody 500-100-1.0 SP, built in 2019. Very well preserved, as good as new facility. Immediately available. Suitable for drying fines up to 1.5 to/h. Input moisture up to 50%. Water evaporation up to 500 kg/h! Heating medium warm air 90°C to 110°C. Takeover possible immediately!

CRAMMED FEEDING UNIT, reconditioned, This unit can be synchronized to feeding screw from buffer silo and horizontal screw in extruder to grant a uniform, continuous feeding, for light scraps, mounted on a 130 mm extrusion line, totally reconditioned, possible addition of mastebatch feeder, availability: in stock, conditions: reconditioned, type: for up to 700 kg/h extruders

Transnorm belt conveyor GF 4365-600-500 RA2493 Technical data: Conveyor length (NL): 4365 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 45 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 4365 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: 1,30 Co ...

DECOILER   design: twin reel   coil weight max.: 0.5 to   max. diameter of coil: 1600 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1500 mm   space requirements -front/back-: 2100 mm   total height: 2200 mm   total weight approx.: 1570 kg - Double reel - Load capacity 1600 kg - Spreading range 270 - 550 mm - max. sheet width 150 mm - 3 pressure arms - Speed approx. 20 m/min

Transnorm Rising falling Incline belt conveyor with leading belt GF 800+4650+560-600-500 RA2494 Technical data: Conveyor length (NL): 6100 mm ( 560 mm arch + 4650 mm riser segment + 800 mm leading ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 6100 ( 8 ...

Key data: 5000 kN, 80 mm

SANDRETTO 500 T Series 7 Type: 3270/500 Clamping Force: 500 T Screw Diameter: 80 mm Theoretical Injection Volume: 2110 cm³ Injection Weight (PS): 2050 g Screw Working Length (L/D): 20 m Plasticizing Capacity: 290 kg/h Heating Zones: 4 Total Heating Power: 31 kW Mold Thickness (Min/Max): 250-800 mm Opening Stroke (Platen Travel): 830 mm Distance Between tiebars: 720 x 720 mm Oil Tank Capacity: 500 L Dimensions: 9.0 x 1.80 x 2.50 m Total Weight: 25,000 kg

Year: 2017 - technically efficient, ready to work – after full service - split heads - pneumatic drive - maximum profile height: 160 mm - resistance unit lowered under the table - hydraulic lock for reversing the resistance unit

Stock number: 4029 Suction Manufacturer: 3NINE LINA, Type: LINA 500 Oilmist Separator Machine NO.: LI500-65-CC-543, Year of manufacture: 2006 Specifications: Fence effect 500m3/hour m/3 Motor power 0.55 Kw Cleaning oil mist (cutting fluid/coolant) Min./max Degree 5-50 Degree Height: 840 mm, Width: Dia. 480 mm, Weight: 30 kg

· Krones Monobloc VK2V 066-103/KK, serial number K090031, built in 1999, capacity 24,000 bottles per hour. · Krones labeller, model 720-18-86-130, serial number K090-C31, built in 1999, output 28,000 bottles per hour. · ZM Jerzy Robak, rinser, model PBSz-01-60, serial number 3.184, year of construction 2014. · Fischer pasteurizer, model 10Pl, serial number 99096, year of manufacture 1999. · Krones crate washer, model KKW-50, serial number 690-095, built in 1995. · Krones crate packer and unpacker, model Linapac, serial number K462-137, built in 1999. · Krones bottle washer, model KES-1-1-190/19-80, serial number 671-214, built in 1998, capacity 28,000 bottles per hour. · Krones conveyor belts with associated control cabinets and control panels

Transnorm conveyor belt GF 5650-600-500 RA2450 Technical data: Conveyor length (NL): 5650 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 41 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 5650 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 ...

Lippert belt conveyor GF 20000-650-500 RA1407 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 20.000 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of construc ...

Dimeco 1675/Dnbsp;straightener with CNC feed system (cybelec) - width: 500 mm - max thickness: 1,6 mm

This 5-axis Okuma LB 300M X 500 was manufactured in 2012. It features a maximum turning diameter of 340 mm and a turning length of 480 mm. The machine is equipped with a powerful spindle speed range of 45 - 3,800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma LB 300M X 500 horizontal turning machine we have for sale. Contact us for further details.

Functioning. The double screw is included. Vemag Robot 500 Filler is a commercial food processor designed for use in restaurants and food service establishments. With variable speed capabilities, this model allows for precise and efficient food preparation. Manufactured by Vemag, a trusted brand in commercial kitchen equipment, this robot filler is engineered to streamline processes and improve productivity in professional kitchen settings. Ideal for businesses looking to enhance their food preparation capabilities, the Vemag Robot 500 Filler offers reliability and performance in a compact design.

Convection oven Manufacturer: Memmert Type: ULE 500 Features: Material: Stainless Steel Electric heating, max. temperature: 220°C Electrical power: 2000 watts, at 230 volts - 50 Hz

Key data: 60 kVA

380V 64 A Plug Length 1.20 m Width 0.80 m Height 1.75 m Weight 350 kg Color: Green Compressed air for control Machine is unchecked.

HTST ARSOPI 500 Litres Pasteuriser built in 2020 by Dairy Machinery UK and Arsopi, This machine is self heated by heating element of 9kw , It is mounted on a stainless steel frame and comes with a control panel, balance tank, auto valves, product and water pump, 1 inlet and outlet pipes which also act as a CIP loop., The complete process is run automatecly with a divert valve to ensure pasteurisation temperatures and milk flow . The machine has hardly had any use and is in perfect condition. We can support this Pasteuriser in full starting from the controls all down to the gaskets of the PHE ., Volume capabilities (litres): 500 , Balance Tank: Included , PHE Temperatures: 4-45-55-65-72-4, Outlets: Separator and Homogeniser Outlets , Divert Valve: Included , Dimensions in cm : 160 x 80 x 200, Product Pump: Included, Hot Water Pump: Included , Comtrols: HMI Touch Screen , CIP: Program incl ...

HTST ARSOPI 500 Litres Pasteuriser built in 2020 by Dairy Machinery UK and Arsopi, This machine is self heated by heating element of 9kw , It is mounted on a stainless steel frame and comes with a control panel, balance tank, auto valves, product and water pump, 1 inlet and outlet pipes which also act as a CIP loop., The complete process is run automatecly with a divert valve to ensure pasteurisation temperatures and milk flow . The machine has hardly had any use and is in perfect condition. We can support this Pasteuriser in full starting from the controls all down to the gaskets of the PHE ., Machines that Can Be added with on extra sale are the below :, 1) SEPARATOR, Specifications Manufacturer :Seital/SPX, Model :SE05, Condition : Used, Stock Number:834, Manufacture:Seital, Capacity : 1200 L/h, Cleaning : Manual Cleaning, Tools : Included, Manual Book : Included, Base Frame : Include ...

These 4-axis Starrag Heckert HEC 500 H/V were manufactured in 2008 and 2009. They features a swivelling head configuration, with an X-axis travel of 800 mm, Y-axis travel of 800 mm, and Z-axis travel of 680 mm. The second machine features a swivelling head configuration, with an X-axis travel of 800 mm, Y-axis travel of 650 mm, and Z-axis travel of 680 mm. The machines include a pallet size of 500 x 500 mm and a maximum load per pallet of 1000 kg. If you are looking to get high-quality machining capabilities, consider these Starrag Heckert HEC 500 H/V horizontal machining centres we have for sale. Contact us for further details.

A heavy-duty pre-screening unit ABR for the mining industry for separating aggregates is available. Inclination: 15°, screen area X/Y: 5000mm/2000mm, number of decks: 1, screen area: 10m², machine dimensions X/Y/Z: approx. 5500mm/2400mm/1500mm, weight: approx. 10000kg. Without a screen. An on-site inspection is possible.

Transnorm Pneumatic Pusher 900-600-500 90° RA2092 Technical Specifications: External Dimensions of Mounting Frame: LxWxH=980x700x825 mm Maximum Product Width: 900 mm Maximum product height: 640 mm Maximum conveyor belt-frame width (NB): 600 mm Maximum conveyor belt-frame height (BH): 90 mm Support feet: available as an option Drive: Pneumatic cylinder Optionally available : Control system Prices net plus VAT from the central warehouse of Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Robot Fanuc S-500iB , R-J3iB with 7th axis/motor Year of manufacture: 8/2006 Control: R-J3iB Number of axes: 6 Max. load capacity: 15 kg max. working range: approx. 2757 mm Profibus Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Height=1.79 m, Overall length= 2.96 m, Overall width= 3.35 m, Net weight= 7000 kg,

Rated load capacity: 5t, clamp pressure/working pressure: 18/16MPa, front overhang: 575mm, center of gravity Px/Py: 480/810mm, weight: 2.1t. An inspection on site is possible.

Pipe belt conveyor in mint condition VECOPLAN type VRF 500 P. Never used before! Including drive station and deflection station, without belt! Drive station with 15 kW Flow rate approx. 200 m³/h Length approx. 65 running metres, diameter 500 mm

Key data: 400 mm, 500 mm

Fixed setting stick with roller quills for PBR 500

Block size press Müro 5000/A4 WT; cleaned and tested; insertion width 350mm; Insertion height 520mm; 1x dryer. Padding press Müro 5000/A4 WT; cleanded and checked; width 350mm; hight 520mm; one heater.

ESCHER Spiral Mixer M-500 R-P - Used machine, little used, year of manufacture: 2021 - for 300 kg flour or 500 kg dough, kettle volume 700 litres, Boiler, kneading arm and middle rod in stainless steel, Boiler lock and boiler drive by patented cone system, two timers, two speeds, automatic switching from low to high speed, hydraulic lifting and lowering of the machine head, closed flour dust protection hood made of stainless steel, Machine incl. two tank cars

Deduster Manufacturer: PharmaFlex Type PF 500 Suitable for tablets/effervescent tablets Dedusting technology: Vibrating ascending spiral Air jet: None Deburring option: None Micro tablets diameter 2.5 mm: 0 Small tablets diameter 5 mm: 3000000 Medium tablets diameter 13 mm: 500000 Effervescent tablets diameter 20 mm: 150000 Small capsules T 4: 750000 T0 Large Capsules: 300000 Inlet Height: 736.0 mm Outlet Height: 1150.0 mm

Homogenizing Mixer Manufacturer: Becomix Type RW 500 CD Capacity 500 litres Homogenizing mixer with agitator and wall scraping coolable and heated, pressure- and vacuum-resistant, homogenizer Included: - 500 litre pre-phase tank MV with dissolver agitator - 3 energy and supply frames including vacuum pump - Valve manifold including flow meter - Control cabinet with PLC 7 control (was converted to PLC 7 in 2008) - Control cabinet with FU - 3-part working platform with stairs The process vessel and the pre-phase vessel are placed on weighing cells. Height open 3.66 m

Homogenizing Mixer Manufacturer: Becomix Type RW 500 CD Capacity 500 litres Homogenizing mixer with agitator and wall scraping coolable and heated, pressure- and vacuum-resistant, homogenizer Included: - 500 litre pre-phase tank MV with dissolver agitator - 3 energy and supply frames including vacuum pump - Valve manifold including flow meter - Control cabinet with PLC 7 control (was converted to PLC 7 in 2008) - Control cabinet with FU - 3-part working platform with stairs The process vessel and the pre-phase vessel are placed on weighing cells. Height open 3.66 m

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4300 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It has a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4300 CX machine we have for sale. Contact us for further details.

Key data: 500 mm

Max. saw blade diameter: 500 mm Automatic positioning of length and angle (90° or 45°), intermediate mitres adjustable from the front Moving roller conveyor Material support pneumatically folds up Minimum quantity spraying device USB Port Instruction manual Weight: 1400 kg

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4000 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It offers a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4000 CX machine we have for sale. Contact us for further details.

turning diameter over bed: 1600 mm turning diameter over slide rest: 1280 mm turning length: 5000 mm centre height: 800 mm spindle turning speed range: 1 - 200 U/min spindle bore: 105 mm spindle diameter in front bearing: 120 mm main drive motor: 75 kW max. workpiece weight between centres: 30000 kg workpiece weight in steadies max.: 40000 kg bed slide rapid adjustment: 4000 mm/min. total power requirement: ca. 100 kW weight of the machine ca.: 52 t Refurbished in 2020 and equipped with: - 4-jaw faceplate Ø 1600 - thread cutting - 4-fold heavy duty tool holder - Hardened tracks - tailstock diffenret Steadies, chip conveyor and other accessories, available upon request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1500 mm greates pass round over bed: 490 mm turning dia. over face-slide: 280 mm control: Heidenhain Manual Plus Speed range - up to: 3000 U/min spindle bore: 65 mm power capacity - workpiece power: 12/16 (100/60%) kW weight of the machine ca.: 3,5 t Equipment/Accessories: - Steady rest - Chuck - Tool holders - Drill bits - Tips - Multifix holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500 mm turning diameter over slide rest: 330 mm turning diameter in the gap: 600 mm turning length: 3000 mm bed width: 505 mm spindle bore: 72 mm spindle head: DIN 55022 Gr. 8 taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/min power requirement: 18,5 kW dimensions: 5,3 x 1,75 x 1,53 m weight of the machine ca.: 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix C toolholder system - some toolholders - steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 60 mm -Transport width: 500 mm -Photographs: 15/12 mm see photos -Quantity: 48 pieces available -Price: per piece -Dimensions: Ø 60 x 530 mm -Weight: 2.2 kg/pc.

This 4-axis DOOSAN NHP 5000 was manufactured in 2019. It features impressive axis travels of 730 mm in both X and Y directions, and 880 mm in Z. The machine is equipped with a FANUC 31i-B control system and offers rapid traverses of 60 m/min. If you are looking to get high-quality machining capabilities, consider the DOOSAN NHP 5000 horizontal machining centre we have for sale. Contact us for further details.

Inv. Num. : 9160 Type: Trumatic 500R Producer: Trumpf Created: 2003 Parameters: Compressive force: 22 t

Bread slicer Rego Rotec 500 Year of Make: 2012 Condition: cleaned & tested Passage width: 230 mm Passage height: 140 mm Insertion depth: 500 mm Cutting thickness: 3-25 mm Max. number of slices: 145 per min. Dimensions WxDxH: 1127 x 705 x 1090 mm

CFS CUTMASTER 325V & 500V

Dosing unit Gorreri DVG 500 Year of Make: 2011 Condition: functional Suitable for filling, spraying or decorating various types of products from doughs, creams, jams and other liquid products Output: max. 40 strokes per min Compressed air: 250 l/min (6 bar) Dimensions LxWxH: 1200 x 600 x 1850 mm Weight: 80 kg

max. format 52 x 52 cm Year of construction 2002 Block Glue Press manual block gluing machine for cold glue Table model Delivery date: short-term

General SKU265Y405 MakeGoavec Serial03AQ 023 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume500 Ltr. Motor1.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity677 l. ( 500 l. ) Vessel sizesDia. 900x1186 mm Dished bottomcheck Dished top sidecheck ManholeDN400 Top connectionscheck OutletDN60 Half coil jacketedcheck Max. temperature-5/+95°c With propellor stirrercheck Motor1,5 kW (400V, 1461/161 rpm (Ex)) Speed mixing shaft161 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) General Year of construction2003 Mounted on legscheck LocationBarneveld Floorspace1,2 x 1,2 m Total height2,8 m Weight350 kg CEcheckOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemical ...

Lippert roller conveyor 1620-570-500 RA2511 Make: Lippert Roller width (RB): 500 mm Nominal width/outer width (NB): 570 mm Length: 1420, 1620, 2100 or 2700 mm Roller diameter: 50 mm Distance between rollers: 76 mm Drive motor: Interroll Drummotor Electrical data: 24 V Frame height: 105 mm Conveyor speed: Speed controll with Interroll Motorcontroller Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) nominal voltage: 24V Conveying length in mm: 1420, 1620, 2100, 2700 Nominal / outside width in mm: 570 Roll width in mm: 500 Roll division in mm: 76 Driven: YES Engine type: Interroll Trommelmotor Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone o ...

This 3-axis Matsuura LV-500 was manufactured in 2017. It features a maximum spindle speed of 46,000 rpm and a robust table size of 540 x 350 mm with a maximum table load of 100 kg. The machine is equipped with a tool magazine capacity of 10 tools and rapid traverse rates of 90 m/min. If you are looking to get high-quality machining capabilities, consider the Matsuura LV-500 vertical machining center we have for sale. Contact us for further details.

Key data: 800 kN

Engel Victory 500/80 Tech / Production line with the Engel Viper 12 robot Year of Make: 2011 Injection unit: Screw diameter: 45 mm Injection weight: approx. 295 g Spray pressure: 1598 bar Dosing volume: 318 ccm Clamping unit: Clamping force: 80 t Spar spacing: 0x0 mm Size of the clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface Hydraulic core pull x 3 Hardened injection unit - Bimetal Robot Angel Viper 12 Year of Make: 2014 5-axis robot: 4 axes are driven by servo motors (electric); Axis A - pneumatic Touch control panel Robot with adapter and protective housing with part separator Purchase of the robot at an additional cost Dimensions: Weight: 5300 kg Length/Width/Height: 4.57x1.48x2.38 m Drive: Pumps/motor: 15 kW All off ...

Key data: 500 kN

Arburg 320A 500-170 with the Sprue Picker / Electric Machine Year of Make: 2005 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit : Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Hardened injection unit - Bimetal Central lubrication Machine with built-in Arburg conveyor belt and original sorting flap Dimensions: Weight: 3500 kg Length/Width/Height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating capacity: 5.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the sele ...