129,017 used machines on RESALE, but how to find them? Machine Search
Key data: 500 mm, 200 mm, 77 mm
Binder 500x200 Complete System Electric 220V Magnet Clamping Plate Milling Grinding Total weight approx. 50 to 60 kg. Good used condition, full function. Includes switch and control cabinet. The connection on the control box can be connected directly to 220 volt luminous flux and can therefore also be used universally on the milling machine. The actual magnet has 110 volts. Very long power cord, about 7-8 meters. The rotary switch only works to the right. That is how it should be. Always switches every 180 degrees every function. You will receive an invoice in paper form. Differential taxation according to paragraph 25a of the German VAT Act. Therefore, no VAT is shown on the invoice.
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1000 liters Machine dimensions in cm: Length: 214 Width: 133 Height: 190 Electric power: 5 kW
Key data: 45 °, 3500 mm, 1350 mm
Basic Cutting length 3500 mm Cast iron sawing unit type Z5 Max. saw blade (not incl.) 500 mm, max. 350 mm with scoring saw blade Scoring unit 120 x 20 mm Cutting height 90°: 175 mm, 45°: 120 mm 3 speeds: 3000/4000/5000 t/min 8D9Kjux2Mt Cutting width between saw blade and Z4 rip fence 1350 mm Z5 Cross Table (1505x760 mm) with Telescopic with Z5 Mitre Stop with 2 Folding Stops Comfort Pack on Cross Table with Extendable Workpiece Roll Frame table with extendable support and degree grid index system with length compensation Motorized height adjustment and inclined position of the saw blade incl. special accessories: Motor 9.2 kW Start/stop in the sliding table
Battenfeld HM 500/3400 Clamping force: 500t Year of construction: 2007 Shot capacity: 1937g Injection unit .../3400 Screw diameter: 85 mm Injection pressure: 1574 bar Shot capacity: 1937 g L/D ratio: 22 Clamping unit 500/... Clamping force: 500 t Plate size: 1590 x 1470 mm Distance between tie bars: 1000 x 800 mm Max. plate spacing: 1600 mm Weight: 25000 kg Equipment: -1 x air valve -2 x core pull on the closing side, NW 6 -Interface for robot according to EUROMAP 67 -Integrated temperature control for the feed zone -Core pull movement and parallel ejection via DFEE auxiliary pump -Wear- and corrosion-protected plasticizing unit package -Potential-free contact parallel to the dosing unit
turning diameter over bed: ? mm turning diameter over slide rest: ? mm turning length: ? mm total power requirement: ? kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,511,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Automatic loading up to 6.5m LoadMaster tube 6,5m with bundle cavity Minimal scratches for LoadMaster tube 6,5m Tube diameter 15mm LoadMaster Tube 6,5 (12mm semi-automatic) Ejection station 3m (incl. conveyor belt) Piece length +1,5m Workpiece tray Nitroline FocusLine ControlLine Laser power control Programmable cutting gas Lens cutting head with 150? focal length SeamLine Tube with interior detection Adaptive clamping technology - feed station Adaptive clamping - sliding chuck - Max. outside diameter of round tubes: 152 mm - Max. outer circle diameter of rectangular tubes: 170 mm - Max. raw material length for automatic loading: 6.500 mm - Max. finished part length: 4.500 mm - Max. workpiece weight: 20 kg - Laser Output: 2 kW - Laser Type: fiber TruDisk 2001 - Maximum material thickness brass: 3 mm - Maximum material thickness cupper: 3 mm - Maximum material t ...
Used Bag-in-Box GANDRA TEC 500+ : 3L/ 5L / 10L / 20L Automatic. For automatic hot or cold bottling of fruit juices, vegetables, wines, etc. Supported packages: 3L, 5L, 10L, 20L. Bag Entry It is done automatically from the tape or manually. Vacuum generation and nitrogen input after pouring are standard. Equipped with a bag counter and a liter counter. Picking up the filled bags into the machines is done manually. Manufacturer: Gandra Model: TEC 500+ Year of manufacture: 2017 Recently, she poured NFC apple juice Capacity: Up to 500 bags with a capacity of 3 liters per hour • 400V/50Hz power supply; 2 kW • Air pressure 6 bar • Installed power – 1.5 kW
Key data: 300 mm, 500 t, 350 mm
Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy.
Key data: 750 mm, 750 mm, 725 mm
GENERAL Project No.: 905674 Quantity: 1 pcs. Manufacturer: HECKERT (STARRAG) Type: HEC 500 D Control: Siemens 840 D solutionline Year of Make: 2011 Condition: Used machine Layers approx.: 2-3 layers DESCRIPTION MILL Travel in X 750 mm Travel in Y 750 mm Travel in Z 725 mm Max. rapid traverse speed in X/Y/Z 100/100/100 m/min Max. acceleration in X/Y/Z 11/14/11 m/s2 Tool holder HSK 63 Max. speed milling spindle 15000 1/min Max. power at ED 10-40/100% 31/– kW Max. torque at ED 10-40/100% 200/– Nm Spindle diameter in the front bearing 75 mm 1 pc. horizontally arranged milling spindle/s Torque support for multi-spindle drill heads Tool magazine 60 stations Max. tool diameter 160 mm Max. tool length 400 mm Max. tool weight 10 kg Chip to chip time 2.7 s Rotary pallet changer 2-fold Pallet size 500×630 mm Max. workpiece weight per pallet 600 kg Rotary ...
Used machine in good condition. Available for immediate delivery. - Laser Type: CO2 - Max. workpiece weight: 120 kg - Laser Output: 3 kW - Maximum material thickness mild steel: 8 mm - Maximum material thickness stainless steel: 4 mm - Maximum material thickness aluminium: 4 mm - Control: CNC - Weight: 17.500 kg - Dimensions (long x wide x high): 18.725 x 6.635 x 2.500 mm
Key data: 5000 mm, 275 mm, 310 mm
Urban AP 5000 F - Travelling column milling machine - Heidenhain track control TNC 410 M, control panel can be moved over the entire processing length - Robust basic construction as a welded frame construction - Ball rail guides on all axes - Milling spindle unit: 80 - 6000 rpm, tool holder SK30 - X-axis with rack and pinion drive (30 m/min) - Y/Z axis with ball screw (20 m/min) - 2 chip drawers - Swivelling clamping device for 4700 mm workpiece length - 10 Pneumatic workpiece clamps - Manually operated central lubrication - Moving disc tool changer for 8 tools - Micro-Spray - Cooling emulsion pump - Machine light - Safety bumper - Machine guard pneumatically vertical opening - Year of construction 2005 - Control on: 26910h - Program run: 9185h - Spindle on: 6557h Defects: - Air hoses of the tensioners have to be partially replaced - Contact cables of the cylin ...
Large Format 3000x1500 Sort Master / ToolMaster SheetMaster No Grip or shearMaster - Max. workpiece weight: 220 kg - Punch diameter max: 76,2 mm - Axis speed [Y axis] max: 60 m/min - Control type: Siemens SINUMERIK 840 D - Simultaneous positioning speed (X / Y): 116 m/min - Operating hours: n/a - Axis speed [X axis] max: 100 m/min - Punching force: 220 kN - Working area max: 3.050 x 1.550 mm - Material thickness (punching) max: 8 mm - Power: installed max: 9,5 kW - Weight: 19.300 kg - Dimensions (long x wide x high): 7.600 x 8.171 x 2.072 mm
Used machine in good condition. Available for immediate delivery. - Screw diameter: 30 mm - Shot weight max: 97 g - Injection volume: 106 cm? - Clamping force: 500 kN - Daylight between platens max: 550 mm - Platen size (h x v): 446 x 446 mm - Distance between tie-bars (h x v): 320 x 320 mm - Power: installed max: 21,5 kW - Dimensions (long x wide x high): 3.410 x 1.475 x 1.990 mm - Weight: 2.330 kg
Buchrückenrundemaschine - Book Back Rounding Machine La Fornigrafica Dorsi 500 Year 2005 Working width max. 500mm Thickness of books 0 - 100mm Output 400 - 600 Blocks/hour Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
turning diameter over bed: - mm turning diameter over slide rest: - mm turning length: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press HAMADA 500 CDA Serial-No. HR-6462 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Book Back Rounding Machine Tränklein BRM 500 Year 1985 - Serial-No. 1421/66/6 Working width max. 540mm Thickness of books 0 - 100mm Output 400 - 600 Blocks/Stunde 2 side tables left - right Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
End mill, end mill, cutter, shell cutter -Manufacturer: Reishauer, end mill with longitudinal groove, 2 pieces -Type: 75 x 75H Sp 5000 KHSS-E 75x75x27 -Hole: Ø 27 mm -Cutting material: HSS-E -Price/Fee: complete -Transport dimensions: 150/75/H75 mm -Weight: 2.9 kg
Pressure: 10 bar Motor: 5,5 kW Free air delivery: 0,815 m³/min Measurement (WxHxD): 1890 x 1520 x 854 Weight: 437 kg Compressed air connection: 1/2
Stapelauslage / Stacking Delivery Palamides Alpha 700 Plus Baujahr / Year 2011 - Serial-No. 2502 Minimalformat / Size minimum 120mm x 90mm Maxmimalformat / Size max. 330mm x 510mm Stapelhöhe / Stack height 10 - 160mm Geschwindigkeit / Speed 15 - 200m7min Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Pressure: 15 bar Motor: 11 kW Free air delivery: 1,319 m³/min Measurement (WxHxD): 2125 x 1730 x 820 Weight: 550 kg Compressed air connection: 1 1/4
Buchrückenrundemaschine - Book Back Rounding Machine Tränklein BRM 500 Serial-No. 1586/74/1 Working width max. 540mm Thickness of books 0 - 100mm Output 400 - 600 Blocks/Stunde Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Stapelwender / Pile Turner Baumann BSW 2-500 Year 1998 - Serial-No. 7356 Bogenformat / Sheet Size max. 550 x 750mm Stapelgewicht / loading capacity max. 500kgs Innenmaß Plattform / Interior platform size 620 x 940mm Öffnungsweite Plattform / Opening of platforms min. 460mm - max. 1220mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Controllo: SELOGICA; Euromap: 500-150; spessore stampo: 225; corsa piano mobile: 350.
Schwertfalzwerk / Mobile Knife Folding Unit GUK ZG 500 Year 1999 Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 40m/min - max. 160m/min Produktivität / Productivity 20.000 cycles/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Blockleimpresse / Block Gluing Machine Müro 4 x 5000 A3 WT 2 1 Pressing stations with stack high of 50cm 1 Drying hot air blower Stapelhöhe / Stack high max. 52,5cm Pressenbreite / Press width max. 52,5cm Pressentiefe / Press deep max. 32cm Gewicht / Weight approx 60 KG Power supply 230 V - 1100/2150 W Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
turning diameter over bed: 400 mm turning diameter over slide rest: - mm turning length: 1000 mm total power requirement: 9 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,511,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 990 mm, 1730 , 1200
Machine type: EVK 500 Manufacturer: ERBA Heating element kW: 4.0 Total volume: 500 lt. Description: With the ERBA Granulate Dryer EVK 500, workpieces can be easily separated from the granulate with the integrated screening device. It has excellent drying ability, a direct heating system and digital temperature control. The working tank is completely sprayed with polyurethane on the inside. The EVK 350 can be linked to other machines. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for out-of-court online ...
macchina bi-iniezione iniezione verticale con vite diametro 20mm paranco portata 200kg altezza da terra 3800mm
Locker changing room 1800 x 1200 x 500 RA2221 Manufacturer: unknown width: 1200 mm Height: 1800 mm depth: 500 mm different versions available 3 x 2, 2 x 2, 3 x 4 and 2 x 4 (horizontal x vertical) lockers benches also available Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics
Drilling method ELB Full drilling 4-33mm Drilling depth max 737mm Spindle antrib 7,5 kw Spindle speed 550-6400rpm Working feed 35-320mm/min Rapid traverse 3500mm/min Coolant High Pressure Pump, Paper Filter, Chip Conveyor, Magnetic Separator Connection 20 KW Dimensions 4100 x 1650 x 1850mm Weight 3500 KG
Transnorm belt curve conveyor left GKF 90°-800-600-IR400 - Exhibit RA2318 Technical data: Frame width (NB): 800 mm Frame width with Bearing cover and motor: 1000 mm belt width (GuB): 600 mm height (BH): 200 mm height with motor (MH): 350 mm Inner radius (IR): 400 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,38-1,14 m/s Drive: Nord gear Motor with Frequency converter for stepples speed controll Electrical data: 50Hz V380-500, kW 0,37 / S1 Year of construction: 2020 Incl. 2 supports, current height 810mm Optionally available: Support, if deviating from the currently installed Sideguides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2020 condition: Ausstellungsstück Nominal / inner radius in mm: 400 Nominal / outside width in mm: 800 Belt width in mm: 600 angle: 90° Driven: YES R ...
Transnorm Rising falling Incline belt conveyor with leading belt GF 4600+3300-600-600 RA2202 Technical data: Conveyor length (NL): 7900 mm ( 4600 mm riser segment + 3300 mm forerun) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7900 ( 4600 + 3300 ) Nominal / outside wid ...
maximum number of results exceeded
please refine your search
