maho mh 500 used for sale

Lippert Belt Conveyor Riser with arch and straight GF 6150-650-500 RA1440 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveyor length (NL): 6150 mm (ascending conveyor 2310mm + upper straight 3840mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR):  ...

Lippert belt conveyor GF 780-650-500 RA1430 The Lippert conveyor belt is from 2001 and in good (used) condition. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 780 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): with frequency converte adjustable Drive: SEW gear motor R17DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-5E Year of construction: 2001 Optionally available: motor with MOVIMOT frequency inverter to control the speed Supports Side guide ...

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x93 mm -Dimensions: 144/144/H93 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x80 mm -Dimensions: 144/144/H80 mm -Weight: 0.7 kg

Lippert belt conveyor GF 1095-650-500 RA1431 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1095 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor R17 DT7 ...

Lippert belt conveyor GF 22250-650-500 RA1426 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 22.250 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of construc ...

Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings -Needle bearing: roller bearing -Inside: Ø 500 mm -Outer: Ø 549 mm -Width: 175 mm -Weight: 29 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo type DNU-80-500-PPV-A -Piston diameter: 80 mm -Stroke: 500 mm -Max. Pressure: 12 bar -Pneumatic damping: adjustable on both sides -Dimensions: 730/155/H95 mm -Weight: 6.9 kg

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 500 mm -Piston rod: Ø 20 mm -Number: 2 pieces available -Price: per piece -Dimensions: 685/65/H65 mm -Weight: 4.2 kg

Lippert belt conveyor GF 1300-650-500 RA1424 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1300 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB-5E Year of construction: 2 ...

Lippert belt conveyor GF 950-650-500 RA1409 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 950 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB-5E Year of construction: 2001 ...

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 500 mm -Length extended: 980 mm -Width: 22 mm/height: 69 mm -Price: per pair (left right) -Number: 2x pairs available -Weight: 4.45 kg

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Span width: approx. 500 mm -Clamping depth: approx. 200 mm -Dimensions: 650/290/H40 mm -Weight: 5.7 kg

Demolition hammer, chisel hammer, Bosch hammer, mortising hammer -Length: 500 mm -Dimensions: Ø 25 x 500 mm -Weight: 1.5 kg

Technical details: RA1025 Manufacturer: Caljan Type: belt curve 60° CC 080 XBK 641 / 054 Year of construction: 2008 Angle: 60° Direction: Left Nominal radius: approx. 600 mm Width: 500 mm Conveyor speed: v = 17 m / min v = 0.28 m / sec Top height cheek: 860 mm + 200 adjustment Strap type: E12/2 UO/U6S GSTR C black Number: 1 x (article no. 20140027) Condition: Used / fully functional Color: Blue (RAL 5002) More information: incl. 2 supports Gear motor Manufacturer: Lenze Features: Construction year: 2008 condition: very good (used) Nominal / inner radius in mm: 600 Belt width in mm: 500 angle: 60° Driven: YES Running direction: LEFT Engine type: Lenze Getriebemotor Conveyor speed m / s: 0,28 scope of delivery: including supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir  ...

Transnorm curved belt Conveyor 45° links 670-500 IR1100 RA1083 The Transnorm curved belt is from 2017. It is as good as new (used) and fully functional. It has an engine of the brand SEW. Columns are not included in the scope of delivery. These are optionally available. curved belts are often used in intralogistics for in-house transport of piece goods and are indispensable for modern distribution centers. Transnorm curved belts convince with performance and reliability. Long operating times are no problem thanks to a low-voltage drive over the entire belt width. Conical drums and a specially developed belt guidance system ensure maximum smooth running. Technical data: Manufacturer: Transnorm Type: TS 1600-105 FH2 curved belt 45° links Built: 2017 Condition: as good as new (used) Engine: fully functional Angle: 45° Running direction: left Inner radius (IR): 1100 mm Nominal/out ...

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Surface: very good -Width: 500 mm -Length: 800 mm -Height: 175 mm -Plate thickness: 26 mm -with: support ribs -Weight: 90 kg

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Mecman type: 167-05 5000-1 -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Stroke: 370 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 63/63/600 mm -Weight: 2.75 kg

Lippert belt conveyor GF 780-650-500 RA1450 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 780 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB 5 E Year of construction: 20 ...

Lippert belt conveyor GF 1290-650-500 RA1392 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1290 mm Frame width (NB): approx. 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37  ...

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -External diameter: 500 mm -Width: 50 mm -Inside diameter: 127 mm -Naxos Union: NK 16/11 P -Weight: 23 kg

Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -with: holes -Width: 400 mm -Length: 500 mm -Height: 30 mm -Weight: 45 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Drive from forklift: Still type EFG 1.0 / 5002 -Motor: 24 V -Power: 4 kW -Pole circle: O 270 mm M16 -Dimensions: 740/405 / H375 mm -Weight: 157 kg

Lippert belt conveyor GF 1090-650-500 RA1393 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1090 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB 5 E Year of construction:  ...

Lippert belt conveyor GF 1045-650-500 RA1367 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1045 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor R17 DT7 ...

V-belt pulley, belt pulley -Diameter: 508 mm -Total width: 120 mm -Straps: 6 -V-belt width: 17 mm -Socket: Ø 59 mm -Pulley: balanced -Weight: 46 kg -other pulleys: in stock

Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling: 0 - 3 mm -Drive: 0.45 kW -Angle: adjustable -Dimensions: 485/345/H250 mm -Weight: 18.2 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -stable tool cabinet -2x shelves: extendable -Dimensions: 500/600/H830 mm -Weight: 36 kg

Rolling curve 45° curve conveyor Conveyor angle: 45° Conveyor width: 500 mm Total width outside: 560 mm Role: slide stored with conical plastic molding Installed power: 0.18 kW constant conveyor speed: v = 0,3 m/sec. Support: ask without support, if needed Shipping weight: 70 kg on euro pallet Transportmasze: L x B x H = 850 x 800 x 500 mm Features: condition: very good (used) Nominal / inner radius in mm: 1030 Nominal / outside width in mm: 560 Roll width in mm: 500 angle: 45° Driven: YES KW: 0,18/S1 Conveyor speed m / s: 0,3 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. ...

Dematic roll curve 90° , curve conveyor Year of manufacture: 2007 Conveyor angle: 90° Conveyor width: 430 mm Total width outside: 500 mm Inner radius: 1270 mm Role: slide stored with conical plastic molding Support: ask without support, if needed Shipping weight: 100 kg on euro pallet Transportmasze: L x B x H = 1800 x 800 x 400 mm Features: Construction year: 2007 condition: very good (used) Nominal / inner radius in mm: 765 Nominal / outside width in mm: 500 Roll width in mm: 430 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,25/S1 Ampere: 1,19/0,68 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freu ...

Rolling curve 45° with a criminal Conveyor curves, drive Centre Make: Transnorm Type: TS 2712 Year of construction: 1995 Project A49993 POS. 665 Conveyor angle: 45° Width: 500 mm constant speed V = 0.78 m/sec Role: slide stored with conical plastic molding and metal rollers without posts Optional columns Shipping weight: 120 kg on euro pallet Transportmasze: L x B x H = 1800 x 700 x 400 mm Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

90° roller curve right Make: Dematic Direction: 90° right serial Width: 440 mm Nominal width (overall width incl. sidewalls): 500 mm Inner radius of the curve: 765 mm Guide on both sides including 2 support: optionally available Height role OK 800 +/-100 mm Features: Running direction: RIGHT condition: very good (used) Nominal / inner radius in mm: 765 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Micrometer, micrometer screw -Measuring range: 400 - 500 mm -Also other sizes: available -Weight: 8.7 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 500 x 200 mm -4x T slots: 14 mm -Clamping angle: rotatable, swiveling, tiltable -Foot recording: mm -Dimensions: 500/300/H210 mm -Weight: 50.5 kg

Bandwidth. 500 mm Strip thickness.. 0.3-2.5mm Coil weight. 5,000 kg Velocity. 70 - 120 m/min. Coil I Diameter.. 508 mm Coil A diameter. 1,500 mm

Transnorm conveyor belt GF 6600-600-500 RA2137 Technical data: Conveyor length (NL): 6600 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R32DT71D4 Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 6600 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentrala ...

Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Mouth size: Ø 500 mm -Short taper mount for: bayonet disc attachment, taper size 8 -Bolt circle: Ø 171.4 mm -Weight: 96 kg

Faceplate, faceplate chuck -Mouth size: Ø 500 mm -Camlock: Short taper flange, taper size 11, bolt circle Ø 235 mm -Weight: 67 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 500 mm -Short taper mount for: bayonet mount -Cone size 6, bolt circle: Ø 133.4 mm -Weight: 73 kg

Key data: 2 mm

Bandwidth... 1,550 mm Strip thickness 0.5-3.0 mm Coil weight. 15,000 kg Coil I Diameter 508 mm Coil A Diameter... 1,600 mm Straightening rollers 23 pcs. Execution. 6 high Stainless steel / aluminium

Transnorm conveyor belt GF 1000-600-500 RA2125 Technical data: Conveyor length (NL): 1000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,75 Drive: SEW gear motor, R17 DRS71S4/MM05/LN Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 1000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m ...

Tool setting device, tool presetting device, cutter setting device -Presetting device for: milling tools -maximum hob diameter: 500 mm -maximum height of the cutters: 500 mm -Dimensions: 800/400/H1600 mm -Weight: 242 kg

Specifications Maximum pressure: 54 tons Power supply: 400V / 7.5 kW Press force: 5.62 kg/cm² Year of construction: 2005 Bale size: 1200x800x1200 mm Productivity: approx. 2 bales/hr Bale weight: approx. 500 kg Price: on request Machine is fully functional, after technical supervision. Price also includes paint renovation.

Ref. -No.: 10201 Manufacturer: AXA Year of construction: 2007 Type of control: CNC Control: Siemens 840D Storage location: Halberstadt Country of origin: Deutschland X-Travel: 5000 mm Y-Travel: 600 mm Z-Travel: 800 mm Machine length: 9400 mm Machine width: 3500 mm Machine Height: 3300 mm Table Dimensions (Lengthxwidth): 6325 x 1050 mm Swivelling: +/-90 ° Numbers Of Tools In Magazin: 120 Turning Speeds: 30-9000 RPM Tool changer: SK 50 Drive Capacity - Spindle Motor: 45 kW Weight Of The Machine Ca.: 23 t Tool change time: 6 s Vertical working height: 0-740 mm Working height horizontal: 250-1050 mm Space requirement (LxWxH): 11000 x 5090 x 3300 mm Feed rate: X/Y/Z: 40 m / min

Pallet truck, pallet truck, stacker, pedestrian pallet truck, forklift truck -Load capacity: 500 kg -Lifting height: 1490 mm -Dead height: 1920 mm -Width: 630 -Length: 1000 mm -Platform: 600 x 600 mm -with: hand pump -Dimensions: 630/1000/H1920 mm -Weight: 114 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 500 mm -Length: 500 mm -Height: 125 mm -with supporting ribs -Plate thickness: 40 mm -Weight: 66 kg

Ref. -No.: 10258 Manufacturer: SCHAERER Type of control: Konventionell Storage location: Halberstadt Country of origin: Germany Lining: Forkardt F315 Brand Machine length: 3.800 mm Machine width: 1.300 mm Machine Height: 1.500 mm Weight Of The Machine Ca.: 4 t Tool holder type: Multifix Typ C Turning Length: 1.800 mm Turning Diameter Over Bed: 520 mm Turning Diameter Over Slide Rest: 320 mm Spindle Bore: 62 mm Bezel diameter (inside): 270 mm Hole in the jaw chuck: 84 x 120 mm

Net auger D500 mm, SEW 7.5 KW, 91 rpm Tel. 01715213204

Make : Tetra Pak / FBF Model : 500 Capacity : 500 litres per hour stages : 2 Bar : 250 Location : Dairy Machinery UK Condition : Good