maho 800 cnc used for sale

CNC lathe for turning and machining metal parts. CNC control: Fanuc 16 T AA Max. turning diameter: 165 mm Turning length: 100 – 340 mm Diameter above bed: 220 mm Main spindle speed: 50 – 5,000 rpm Main spindle power: 5.5 / 7.5 kW Main spindle bar passing: 65 mm Sub-spindle speed: 50 – 5,000 rpm Sub-spindle power: 3.7 / 5.5 kW Sub-spindle bar passage: 42 mm C-axis: 0.001° Turrets: 2 Tool positions: 2 × 16 Motorized tools: 2 × 16 positions Strokes: X 175 mm / Z 240 – 680 mm Total power: 41 kVA Dimensions (mm): 3,500 × 2,800 × 2,000 Weight (kg): 5,500

Control: Siemens Acramatic A2100 Di Speed: 6,000 rpm Travel in X/Y/Z: 510/510/510 mm Spindle: Technology: Belt spindle Speed: 6,000 rpm Tool holder: SK40 Work table: Clamping area: 700 x 520 mm Table load (max.): 500 kg General: Tool magazine: 21 stations Rapid traverse in X/Y/Z: 24/24/24 m/min Equipment/accessories: Chip management: chip tray Coolant management: IKZ pump with filter and high pressure Tool Measurement: Pushbutton, Renishaw TS27R Setup operation: Electronic handwheel Other equipment: Div. gebr. Tool holder and 1 pc. machine vice (Allmatic HD 125), transformer ATTENTION: The machine is not wide and is sold as a parts carrier. According to the dispenser, the control (board) is defective.

" Manufacturer: Werth Messtechnik GmbH Type / Model: Scope-Check 400 × 400 × 150 3D CNC Machine type: Multi-sensor coordinate measuring machine (optical / tactile) • Year of manufacture: 2006 • Serial number: 06-00376 Condition • Used, well-maintained overall condition • Machine was in measurement operation until the end • Regular calibrations documented • No obvious damage to granite, guides or measuring system Accessories / Scope of Delivery • Granite machine with measuring glass and cover • CNC control with scope controller • Renishaw pushbutton (several probe inserts available) • PC workstation with: • Computer • Monitor(s) • Keyboard, mouse • Control panel / joystick • Documentation: • User manuals (WinWerth) • Calibration and test protocols • Folder with machine and measuring room documentation • Software and calibration data carrier (CD/DV ...

CNC vertical machining center for machining metal parts. Numerical control: Siemens Sinumerik 810D Powerline Strokes: X 640 mm / Y 600 mm / Z 500 mm Table: 850 × 600 mm Maximum table load: 600 kg Spindle taper: SK 40 (DIN 69871) Spindle speed: 1 – 8,000 rpm Fast feeds: X 70 m/min / Y 40 m/min / Z 40 m/min Tool changer: 30 positions Spindle motor power: 12 / 17 kW Energized hours: 43,000 h Operating hours: 15,000 h Note: Without tool holder

CNC Control: BROTHER CNC-A00 X/ Y/Z Axis Travels: 480 × 360 × 410 mm Table Dimensions: 600 × 300 mm Number of Tools: 14 Spindle Taper: BT30 Max. Spindle Speed: 16,000 RPM Spindle Motor Power: 7 kVA Drilling Capacities: Steel Ø 32 mm, Aluminum Ø 25 mm, Cast Iron Ø 25 mm Tapping Capacities: steel up to M16 Included equipment: 4 BT30 tool holders, lubrication tank with pump Weight (kg): 1800 Year & Manufacturer: 2007 – BROTHER

Manufacturer: FAMUP Year: 1994 Type: CNC vertical machining center Numerical control: FANUC Series O-M Strokes: X 600 mm / Y 400 mm / Z 400 mm Table: 400 × 400 mm – max. load 300 kg Spindle: ISO / SK 40 – 6,000 rpm – 11 kW Tool magazine: 18 positions – Max. tool Ø 75 mm – changeover time 2 s Chip conveyor: Yes Dimensions (mm): 3200 × 2900 × 2600 Weight (kg): approx. 3500 Notes: Italian-made CNC vertical machining center, suitable for general milling. Lots sold as is, unchecked, without tools or tool holders.

Machine number: A0045A0007 Operating voltage: 400 V Frequency: 50 Hz Connection: 17 kVA Rated current: 35 A Travel X-axis: 2015 mm Travel Y-axis: 1215 mm Max. material thickness: 6.4 mm Max. workpiece weight: 150 kg Max. punching force: 165 kN max. hold-down force: 10 kN Max. stroke sequences punching Hole spacing 1 mm: 600 rpm Signing: 1300 rpm Max. axis speed X-axis: 80 m/min Y-axis: 55 m/min simultaneous: 97 m/min max. acceleration X-axis: 10 m/qs Y-axis: 5 m/qs C-axis punching/thread forming: 175/min Number of positions in the linear magazine: 17 Number of tools/claws: 15/2 Number of tools when using multi-tool/claws: 15-150/2 Number of claws location/2: max. 2/3 Reject parts: max. part size via disc chute: standard 180 x 150 mm max. part size via disc chute with movable support table: 460 x 500 mm Accuracy position deviation: +- 0.1 mm Average position spreading width: +- 0.03 mm in ...

CNC Control: FANUC Series 18-T Number of axes: 3 (including C-axis) Maximum machining diameter: 200 mm Distance between tips: 300 mm Max. spindle speed: 3,000 rpm Spindle power: approx. 17.5 kW Turret: 12 fixed positions + 6 rotating positions Chuck: Ø 200 mm Spindle: direct collet mounting possible Weight (kg): approx. 4200 Year & Manufacturer: 1993 – HARDINGE

Manufacturer: DOOSAN Year: 2008 Type: CNC Vertical Machining Center Numerical Control: FANUC 0i-M Series Strokes: X 1020 mm / Y 510 mm / Z 525 mm Fast Feeds: X/Y 36 m/min – Z 30 m/min Spindle: 12,000 rpm – 11 kW (continuous) Tool magazine: 30 tools Table: 1200 × 500 mm – max. load 799 kg Accuracy: ±0.005 mm – repeatability±0.003 mm Dimensions (mm): 2795 × 2850 × 2275 Weight (kg): 6500

Strokes: X = 635 mm, Y = 510 mm, Z = 460 mm Spindle speed: 20 – 12,000 rpm Spindle power: AC 13/9 kW Fast feeds: 30 m/min Taper: SK40 DIN69871 Tool changer: 20 positions (disc magazine) + 30 position option Table dimensions: 560 x 790 mm RENISHAW probe: OMP40-2, OTS, OMI-2T module Machine hours: 21,788 h Spindle hours: 8,654 h Lots sold as is, unchecked, without tools or tool holders.

A Mazak CNC 5-axis machining center with a dual pallet changer is available. Spindle power: 22kW, speed: 10000rpm, rapid traverse: 42m/min, tool positions: 80, tool holder: SK50, coolant pressure: 70bar, control system: Mazatrol Matrix. Including CNC option package Performance, preparation for Monitoring System B, Mayfran Consep 2000 chip conveyor and tool length measuring device. Documentation available. An on-site inspection is possible.

Star SB-20R type GYear of manuf. : 2022 Control : Fanuc 0i-TF ____________Description:Mainspindle:Technology:MotorspindleSpeed (max.):10.000 rpmPower (max.):3,7 kWBarcapacity:20 mmMovement in Z (Longturning mode):205 mmWorkpiececlamping:Collet chuckGuide Bush: Running synchronouslySubspindle:Technology:MotorspindleSpeed (max.):9.000 rpmPower (max.):1,1 kWWorkpiececlamping:Collet chuckEjector:PneumaticLinearslide:Number of stations lathe tools:6Taper:12 x 12 mmNumber of stations Drilling unit:4Tooldrive:8.000 U/minNumber of stations front drilling quill holder:4Taper:Ø22 mmRear attachment:Number of stations:4Taper:Ø22 mmTooldrive:8.000 rpmEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Coolant pump with FilterRaw-material feed:Barlaoder, FMB minimag 20Finished-part-removal:Conveyor belt with collection trayToolholder:Misc. static and driven toolholderFurther Equi ...

Control Fanuc 0i-TF Main spindle: Motor spindle technology Speed (max.) 10,000 rpm Power (max.) 3.7 kW Bar passage 20 mm Travel in Z (longitudinal turning mode) 205 mm Workpiece Clamping Collet Chuck Guide Bush Synchronous Running Sub-spindle: Motor spindle technology Speed (max) 9,000 rpm Power (max.) 1.1 kW Workpiece Clamping Collet Chuck Pneumatic ejector Linear slides: Number of lathe chisel stations 6 Tool holder 12 x 12 mm Number of stations drilling rig 4 Tool drive 8,000 rpm Number of stations frontal drill quill holder 4 Tool holder Ø22 mm Residual apparatus: Number of stations 4 Tool holder Ø22 mm Tool drive 8,000 rpm Equipment/accessories: Chip Management Chip Conveyor Coolant management coolant pump with filter Raw material feed loading magazine, FMB minimag 20 Precast Removal Conveyor Belt with Drip Tray Tool holders Div. rigid and  ...

Key data: 4200 mm, 2300 mm, 1250 mm

Control Siemens ... Sinumerik 840 D Clamping table surface ... 1600x4000mm Axis X ... 4200mm Stand passage... 2100mm Max. table load ... 10 000kg Axis Y ... 2300mm Axis Z ... 1250mm Spindle mount... ISO 50 Spindle speed ... 40-6000 rpm Max. spindle torque ... 1050/1435Nm Rapid traverse ... 10m/min Main engine power ... 30/41kW Total power requirement ... 79kVA Machine weight ... 51000kg L x W x H ... 10480 x 5200 x 6120mm Incl. milling heads - C50 and N75 The machine is in good condition, possible to test under power.