maho 800 cnc used for sale

800 mm bucket for JPC excavators (except HT25 mm), Ø25 mm coupler, never used Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-45834-422

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, WITHOUT Rema plug for batteries with 300-800Ah possible Delivery by freight forwarder possible on request. Auction-ID: A1-45450-4851

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, WITHOUT Rema plug officially for batteries with 300-500Ah, but works up to 800Ah Delivery by freight forwarder possible on request. Auction-ID: A1-45450-4850

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/F5jJKl9v-vc - Former Jungheinrich full-service machine - Battery: 10/2022 48V 5 PzS 625, very good performance measured with 49.7V - Triplex mast with full free lift - 3rd valve, sideshift - LED front work light - Warning light orange - Comfort seat - Attention: lifts, but does not drive at the moment (often sensor or cable) Auction-ID: A1-45450-109

Digital caliper MAHR MarCal 18 ESA 800 mm, calibration 2025-10, internal 291, wooden box

Digital Height Gauge MAUSER KGM 800

water-cooled Auction-ID: A1-43332-3

Pöttinger Jumbo 8000 loader wagon with 8-wheel chassis and Isobus Specifications: Brand: Pöttinger Model: Jumbo 8000 Year of construction: 2006 License Plate: LFJ-28D Chassis number: 05516101159 Volume: approx. 46.5 m³ Pickup width: approx. 2.0 meters Length: approx. 1135 cm Width: approx. 285 cm Height: approx. 385 cm Chassis: 8-wheeled Kurmann, 18 tonnes Tires: 8x 560/45 R22.5 Hitch: K80 towing eye Drive: PTO (wide) Features: Hydraulic scraper floor with 2 speeds Hydraulically retractable cutter bar (max. 45 blades) Hydraulically suspended chassis Guided chassis Isobus control Separate control box Particularities: Suitable for intensive contract work and agricultural use Large loading capacity Auction-ID: A1-40135-13

This lot has not been tested for functionality. Parts may be damaged or missing. The seller does not provide any warranty; Auction-ID: A1-45925-1

Trolley approx. 1200 x 800 mm 5 x Wood All with 2 swivel castors each Auction-ID: A1-45889-2693

Auction-ID: A1-45889-170

Stacking container, 1200 x 800 mm, 3 solid walls, 1 low longitudinal wall Auction-ID: A1-45889-2747

Auction-ID: A1-45889-2969

Bundeswehr pallet box green 1200 x 800 x 900 side opening Auction-ID: A1-45889-2678

Trolley approx. 1200 x 800 mm 3 x Wood 2 x Plastic All with swivel castors Auction-ID: A1-45889-2655

Spindle support for SUI 80 longitudinal direction

Maximum force 470 daN Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-3

Double swing gate complete set (height: 1,800 mm) Details: Description: Double bar mat fence gate complete set (height: 1,800 mm) Details: 1.8 m x 3 m, complete set including post and handle set/mounting material Colour: Anthracite (RAL 7016) Gate: Frame 60/40 (1,800 mm high and 3,000 mm wide) Posts for concreting: 2,400 mm (80/80) Door panel: 6/5/6 Mesh size: 50mm x 200mm Number of doors: 2 Number of posts: 2 Location: 32602 Vlotho Auction-ID: A1-46075-62

Slide size 1000x800 mm Slide stroke 100 mm Strokes per minute 40-100 Opening between uprights 520x260 mm Worktop size 1000x800 mm REEL Max reel width 600 mm RECTIFIER Max belt width 500 mm DISMANTLING AND LOADING COST: EURO XXXXXXXXXX The cost does not include any disposal of the oils present in the system, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-1

Double swing gate complete set (height: 1,800 mm) Details: Description: Double bar mat fence gate complete set (height: 1,800 mm) Details: 1.8 m x 3 m, complete set including post and handle set/mounting material Colour: Anthracite (RAL 7016) Gate: Frame 60/40 (1,800 mm high and 3,000 mm wide) Posts for concreting: 2,400 mm (80/80) Door panel: 6/5/6 Mesh size: 50mm x 200mm Number of doors: 2 Number of posts: 2 Location: 32602 Vlotho Auction-ID: A1-46075-44

Each micrometer features two easily interchangeable anvils. This model features a 700-800 mm measurement range. Graduation: 0,01 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 800 x 1090 x 105 mm; Approx. Weight: 17kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-68

Motor power: 5kW. Auction-ID: A1-45979-123

Lot consisting of gerner trays p9cm 15-hole 1 pallet 2100 pieces, 1 pallet 2100 pieces, 1 pallet 1200 pieces and 1 pallet 2600 pieces Auction-ID: A3-43520-17314

Serial Number: 00826 Voltage: 400 V Max. Power: 230 kVA Auction-ID: A7-46287-5

Sanding diameter: 800mm, Table tilt. Auction-ID: A1-45979-113

Two recooling plants of the same size, each with a recooling capacity of 850 KW

Equipped with swivel wheels, height adjustable, interval timer Auction-ID: A1-43992-316

granulate drying installation, to be combined with lot 23/24/25, Please note! Pick up by appointment Auction-ID: A1-43992-292

Equipped with control box and remote control Auction-ID: A1-43992-71

Good condition Auction-ID: A7-46327-93

Extra options : Spoon adjuster , All-round lighting , recently inspected , radio , ventilation , closed cabin , Deutz engine Auction-ID: A1-43890-10

Festo - DGC-63-800-KF-YSRW-A - linear cylinder 1x Auction-ID: A1-46070-160

Festo - DGC-63-800-KF-YSRW-A - Batch of linear actuators 4x Auction-ID: A1-46070-304

Control: SIEMENS 840D Max.turning length: 450 mm Max swing diametr over bed/Slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l M

Control: Heidenhain Max.turning length: 450 mm Max swing diameter over bed/slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l Ma

with 2 pcs. roller conveyor Auction-ID: A7-45452-19

CNC LATHE Inv. No. 12.711C1 Make MONDIALE Model GALLIC 420 CNC Control FANUC 10TF Serial number CNCG1685B17GE Centre distance 870 mm Max. swing over Bed Ø 420 mm Max. swing over Cross Slide Ø 214 mm Spindle bore Ø 69 mm R.P.M. 45 – 2500 (inf. var.) kW 11 Volts 400 Cycles 50 Including: 6 Pos. turret Coolant

CNC Week Homag; 6.00 m in the X-axis; incl. rich accessories such as milling cutters; saws; swivel tools; etc. Then there are some controlled vices; many material suckers / suction pads. The main spindle was renewed once. There was also a software update. Stands unused for about 6 months. Auction-ID: A7-45983-6

CNC LATHE Inv. No. 12.711C1 Make MONDIALE Model GALLIC 420 CNC Control FANUC 10TF Serial number CNCG1685B17GE Centre distance 870 mm Max. swing over Bed Ø 420 mm Max. swing over Cross Slide Ø 214 mm Spindle bore Ø 69 mm R.P.M. 45 – 2500 (inf. var.) kW 11 Volts 400 Cycles 50 Including: 6 Pos. turret Coolant Auction-ID: A1-45737-114

CNC LATHE Inv. No. 12.710C1 Make MONDIALE Model GALLIC 420 CNC Control FANUC 10TF Serial number CNCG16AC Centre distance 870 mm Max. swing over Bed Ø 420 mm Max. swing over Cross Slide Ø 214 mm Spindle bore Ø 69 mm R.P.M. 45 – 2500 (inf. var.) kW 11 Volts 400 Cycles 50 Including: 6 Pos. turret Coolant Auction-ID: A1-45737-113

CNC MILLING MACHINE Inv. No. 12.565J Make TOS Model FGS 40/50 CNC Mach. No. 43400083 Control Heidenhain TNC 355 Table 400 x 1,250 mm Longitudinal Travel (X) 850 mm Cross Travel (Y) 500 mm Vertical Travel (Z) 500 mm Taper ISO 50 R.P.M. 35 – 1.800 kW 7,5 Volts 380 Cycles 50 Auction-ID: A1-45737-198

Complete mixed lot of CNC tooling from industrial use. Sale includes all tools shown in the pictures. Assorted tool holders, boring bars, cutters, drills, indexable tooling and accessories. Used condition, sold as one package only. Ideal for resale, spare stock, or workshop use Auction-ID: A7-46285-2

Doosan (Daewoo) Lynx 220 CNC lathe – a compact and very popular turning centre for serial production and precision machining. Key information • Manufacturer: Doosan Infracore Co., Ltd. (Korea) • Model: Lynx 220 (designation on nameplate: Lynx 220…) • Control system: FANUC (panel marked FANUC Series” visible in the photos) • Year of manufacture (from nameplate): 2005/10 • Power supply (from nameplate): AC 200/220 V, 3~, 50/60 Hz • Rated power (from nameplate): 11.0 kW • Max. load (from nameplate): 23.68 kVA • Full load current (from nameplate): 92.1 A • Short-circuit / interrupting current (from nameplate): 17,000 A • Serial number (from nameplate): 1422006821 (read from the photo) Equipment / accessories visible in the photos • SEI Filtration oil mist extractor / filtration unit mounted on the machine is not included in the sale. Auction-ID: A7-46 ...

Visible features: • ELCON 5 control • enclosed working area • 3-jaw chuck • coolant nozzle / hose • operator panel • tailstock / support unit visible Condition: Used machine, sold as seen / as shown in the photos. Inspection possible by arrangement Auction-ID: A7-46285-8

Complete mixed lot of used CNC tooling and tool holders from industrial use. Sale includes all tools shown in the pictures. Assorted taper tool holders, drill holders, arbors, milling tools, reamers, indexable tooling and accessories. Used condition, sold as one package only. Ideal for resale, spare stock, or workshop use Auction-ID: A7-46285-3

: Doosan (Daewoo) Lynx 220 CNC lathe – a proven, compact turning centre for serial production and precision machining. Key information • Manufacturer: Doosan Infracore Co., Ltd. (Korea) • Model: Lynx 220 • Control system: FANUC • Serial number: L220122651 (read from the photo) • Year of manufacture: 2006/07 • Power supply: AC 200/220 V, 3~, PE, 50/60 Hz • Rated power: 11.0 kW • Max. load: 26.68 kVA • Full load current: 62.13 A • Short-circuit / interrupting current: 17,000 A Important note The SEI Filtration oil mist extractor / filtration unit mounted on the machine is not included in the sale. Auction-ID: A7-46285-12

Technical data: Turning diameter over bed: 1260 mm Turning diameter at opening: 2700 mm Turning diameter at the pit: 3800 mm Turning diameter via slide: 900 mm Turning length: 4000/5000 mm

The machine is equipped with controlled B-axis smallest delivery 0.001, swivel range 340, controlled workpiece spindle stick (C-axis)smallest delivery 0.05, max. 42 rpm, equipped with an external grinding spindle (left and right spindle end), 1 internal grinding spindle. For an additional charge, a second internal grinding spindle can be delivered. Z-way 680 mm, X-way 255 mm, smallest delivery of the axles 0.001 mm. Tip height 175 mm, W.-stock MK 5, step. adjustable 1 - 1200 rpm, external grinding spindle 1000 - 3000 rpm, max. grinding wheel perm. 300 mm. The machine is suitable for ideal for the processing of carbide and technical ceramics (SIC and Al 2). Intermediate sale:reservations Delivery time:4-6 months

Technical data: Diameter over bed: 625 mm Turning length: 1500 mm Diameter via slide: 325 mm Spindle head shape: Cam-Lock Spindle drilling diameter: 105 mm

Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!