maho 2000 used for sale

Machine number: 32250 Throat: approx. 1300 mm Speed: up to 1800 rpm Table dimensions: 1570 x 440 mm with one groove incl. matching accessories and documentation as well as gripper arm Auction-ID: A7-49089-373

Press brake, bending machine, swing bending machine, die bending machine -Manufacturer: LOTZE Swivel bending machine with segmented upper jaw type 1512000 3.5 -Drive: mechanical, cam control semi-automatic -Max. working width: 2000 mm -Max. sheet thickness: 3.5 mm -Max. intermediate dimension: 180/280 mm -Accessories: 12 segmented upper cheek splints, 3 upper cheek splints -Connected power: kW -Dimensions: 3350/1250/H1600 mm -Weight: kg

2000 KVA prime @ 50 Hz or 2500 KVA prime @ 60 Hz, Power (KVA): 2000, Working hours: 4004

2000 KVA prime @ 50 Hz or 2500 KVA prime @ 60 Hz, Power (KVA): 2000, Working hours: 4257

Manufacturing number: 160090 Operating voltage: 400 V Frequency: 50 Hz Rated current: 70 A Connection: 48 kVA Tip height: 260 mm Center width: 2000 mm Control: SIEMENS SINUMERIK Max. grinding length: 2000 mm Grinding wheel diameter: max. 520 mm Max. grinding length for plunge grinding: 125 mm Max. workpiece weight: 500 kg Tool holder: Taper 1:10 D=120 Drive power: 22 kW incl. belt filter system, extraction, various cones Auction-ID: A7-49089-356

robot: Kr220-2000 R2700 Axles: 6 Load capacity: 210 kg Reach: 2700 mm Control: Vkrc2 Serial Number: 623921 accessories: Control cable Power cable Control panel Auction-ID: A7-32339-1

Serial number: 0177 Operating voltage: 230 V Frequency: 50 Hz Reference: Alesco - Lot 100 Auction-ID: A7-49882-64

Jumberca MIL double jersey circular knitting machine. Year of manufacture: 2000. Serial number: 6858. Cylinder diameter: 33\" (838.2 mm). Gauge: 18. Number of needles: 1,860 + 1,860 (cylinder and dial), 3,720 needles in total. Maximum speed: 20 rpm. Maximum air pressure: 6 bar. Installed power: 8.4 kW. Electrical connection: 380 V, 50/60 Hz. Machine weight: 2,890 kg. Approx. overall dimensions (L x W x H): 2,900 x 2,200 x 2,800 mm. Equipped with Memminger-IRO Pulsonic 5.2 central lubrication unit. Pulsonic lubrication unit manufactured in 10/2007. CE marked. Made in Spain. Auction-ID: A1-49879-3

Used electric chain hoist with integrated electromagnetic brake. The drive motor is designed as a double-pole winding motor with two power levels (0.44 kW / 1.80 kW) and two speed stages (620 / 2770 rpm). The device is suitable for use as a hoist in production halls and warehouses, especially for moving and lifting loads on crane girders or rails. The device is used and shows normal signs of use due to use. Mechanically complete, with hook, chassis, control cables and cable remote control. Scope of delivery: 1 electric chain hoist with chassis 1 cable remote control (yellow) 1 junction box / control box connection cable and control cables Type: RF90L/8-2TS-PrB20 Serial number: 820691 Motor power: 0.44 / 1.80 kW Operating mode: S3-25% / 40% Speed: 620 / 2770 rpm Voltage: 400 V Y/Y Current consumption: 2.5 / 5.3 A Frequency: 50 Hz Power factor (cos φ): 0.68 / 0.78 Heat class: ...

This lot has not been tested for functionality. The seller does not assume any warranty for the condition and functionality, as well as for traffic and operational safety of this lot; The given dimensions, weights, other data, mileage and operating hours are to be understood as approximate guidelines. No guarantee is given for the accuracy of the information ; Auction-ID: A1-49880-11

Item number: 7100.2000.G , Serial number: VC1792 , for more details see photo of the nameplate Auction-ID: A7-49942-1118

For sale is a stable roller conveyor / gravity roller conveyor for industrial use. The roller conveyor is not driven and is suitable for manual transport of cartons, containers, workpieces and other piece goods. Technical data: Design: Roller conveyor / gravity roller conveyor Length: approx. 2,000 mm Width: approx. 500 mm Height: approx. 400 mm Numerous free-running plastic rollers Stable metal/steel frame construction with feet or brackets non-motorized Condition: used, with usual slight signs of wear The roller conveyor comes from our production plant and can be used, for example, in production, assembly, packaging, picking or warehouse/logistics. Viewing possible by arrangement. Auction-ID: A1-49948-22

DR. HEINRICH SCHNEIDER WM1 Precision Measuring Microscope – Year 2000 For sale is a high-quality Dr. Heinrich Schneider WM1 precision measuring microscope, built in 2000, including existing accessories. The meter has been used only rarely and is in a very well-maintained and fully functional condition. The WM1 is designed for precise optical 2D measurements and quality inspections. The large precision cross measuring table enables the exact positioning and measurement of workpieces and component geometries. Technical data / equipment: Manufacturer: Dr. Heinrich Schneider Messtechnik Model: WM1 Year of Make: 2000 Measuring range X/Y: approx. 200 × 100 mm Measuring table: approx. 400 × 240 mm Max. table load: approx. 20 kg Magnification levels: 1× / 3× / 5× / 10× / 20× Telecentric optics Precision cross measuring table with glass support Digital Measurement/Evaluation Uni ...

Item number: 7100.2000.G , Serial number: VC1792 , for more details see photo of the nameplate Auction-ID: A7-49942-1117

Year: 2000 Weight (kg): 4000 Remarks: Used industrial railbreakers. Auction-ID: A1-49695-213

Consisting of: hefkiep. type Herkules HK600/3000, Head machine, type: T 6/5/4 S-1/1-70 9 (2000), with \"TRÖ\" pre-portioner with oil system, 6 rows, long former, scarifier unit, stamping unit, proofing cabinet, \"KGV\" type: RR610 SOHN-L-(B) 1035 (2000), Siemens S7 control. Auction-ID: A1-49547-103

Equipped with emergency stop button, bottom and top extraction 80 - 100 mm, milling guide with mutual left and right fine adjustment of the guides, A protected control cabinet for automatic control of the power supply, Thermal motor protection and door lock switch. Steff type 2033 feeder, Motor 380 volt, 0.75 Kw three rubber feed rollers D = 100 mm w = 50 mm. 8 supply speeds adjustable. Auction-ID: A1-48994-49

Technical data Manufacturer: BGU Maschinen / Südharzer Maschinenbau GmbH, Nordhausen Type: RLG 2000 Factory number: 37597406 Year of Make: 1999 Dimensions (L × W × H): 1500 × 1275 × 2200 mm Weight: 240 kg Power: 3.0 kW Rated current: 4.9 A Voltage: 400 V Frequency: 50 Hz Rated Speed: 2850 1/min Suction nozzle diameter: 140 mm Nominal volume flow: 1365 m³/h Minimum volume flow: 1107 m³/h Negative pressure: 1500 Pa Configuration Design: Mobile clean air dust extractor on chassis, version B1. Suitable for extracting combustible dusts of dust explosion classes St 1 and St 2. Auction-ID: A1-50026-33

Technical data Manufacturer: Knuth Werkzeugmaschinen Neumünster-Wasbek, Germany Type: KTB 32 Serial Number: 0002017 Year of Make: 2000 Power consumption: 1.5 kW Voltage: 400 V Frequency: 50 Hz, 3 phases Drilling capacity: 32 mm Table: 350 × 350 mm Quill stroke: 125 mm Projection: 230 mm Column diameter: 85 mm Spindle speeds: 190–1850 min⁻¹, 9 steps Spindle mount: MK 3 / MT 3 Height: 1780 mm Weight: 140 kg Configuration Version: Height-adjustable and swivelling work table, table adjustment via hand crank and rack, V-belt drive, adjustable quill retraction and lifting stop, machined machine foot with clamping options, machine vice. Auction-ID: A1-50026-26

Buffer tank size approximately 170x45øcm there are no tools available for loading this lot. Plot is being prepared for transport. Auction-ID: A1-47444-93

Year & Manufacturer: 2000 — SICAR Group Power supply: 400 V – 50 Hz Auction-ID: A1-50001-28

Number of heads: 2 Needles per head: 12 Type: industrial multi-head embroidery machine, suitable for tubular/flat embroidery and caps Head distance: 450 mm. The \"45\" in the type designation refers to approximately 450 mm of space per embroidery head. Embroidery field: 500 × 450 mm is specified for a used A-UK1202-45. Maximum speed: for the UK1202 series, the SWF manual mentions a maximum of about 1,000 stitches/minute for tubular work and caps; for border/flat work about 900 stitches/minute. Automatic functions: automatic color change and automatic thread cutter are supported by the SWF control. Caps: suitable for a cap driver; For example, a 2000 example came with a 270° wide cap driver. Storage/Control: Older machines in this series may still have a built-in disk drive/floppy drive. Year of construction 2000 Auction-ID: A1-47444-113

Missing cassette Condition: second-hand equipment, sold as is Auction-ID: A1-50069-70

Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Handover: in its current condition as inspected -Condition: Problem with the lead screw -Manufacturer: Strunguri Arad, lead screw and feed screw lathe type SNA560x2000 -Turning length: 2140 mm -Turning diameter over bed: 600 mm -Turning diameter over support: 330 mm -Spindle bore: Ø 65 mm Spindle speeds: 16 - 1600 rpm -Three-jaw chuck: Ø 310 mm -Tailstock mount: MK5 -Drive motor: 11 kW Accessories included, see photos -Dimensions: 3700/1050/H1400 mm -Weight: 3600 kg

inv 4815 - Bowl Manufacturer: Gama Year: 2000 Serial Number: 00.018 Stainless steel Bowl diameter: 600 mm Footprint diameter: approx. 14.6 mm Overall dimensions (W x D x H): 920 x 750 x 1740 mm Weight: 80 kg Auction-ID: A1-49706-66

inv 6201 - Stainless steel tank 2000 liters Manufacturer: Bionaz Year: 1972 Propeller type agitation Bauer gearbox, 1400 RPM / 122 RPM, ATex ATex Tank bottom valve On 4 feet Overall dimensions: Ø 1220 x h 3260 mm Weight: 380 kg Auction-ID: A1-49706-132

Including license plate. Hours: 11000. LED headlights Auction-ID: A1-41961-43

inv 6202 - 2000 liter tank Manufacturer: Bionaz Year: 1972 Propeller type agitation Siemens 2840 RPM motor + Bauer gearbox + Rayneri Dynabloc CB25 device (year 1998) Tank bottom valve On 4 feet Overall dimensions (W x D x H): Ø 1340 x h 3350 mm Weight: 380 kg Auction-ID: A1-49706-133

inv 7203 : In-line colloidal crusher Manufacturer: IKA – Werke Gmbh&Co Model: MK 2000/5 Year: 2009 Overall dimensions (W x D x H): 1060 x 686 x 1400 mm CE compliant Manufacturer data: • Max capacity ref H2O: 2500 l/h • Output Speed: 5800 1/min • Engine power: 4kW • Input connection: DN40 • Output connection: DN32 • Also includes: • Stainless steel trolley Auction-ID: A1-49706-254

inv 4972 - Hoist Manufacturer: Unepal Year: 2000 Capacity: 1600 kg Hook Travel: 4.5 m CE compliant Auction-ID: A1-49706-75

inv 6336: Water Treatment System Water Purifier Manufacturer: MILLIPORE Model: Direct-Q 5 Year: 2000 Serial Number: F5PN06070 Overall dimensions (W x D x H): 350x260x500 Auction-ID: A1-49706-147

inv 3119- Sterilizer Manufacturer: Logi-Ste Model: Logi Ste 1 Year: 2000 Serial Number: 18 Auction-ID: A1-49706-18

inv 7045 : Filling Pumps Manufacturer: SSC Model: were installed on an SPC UAD 2 Micro 6P7A dosing module – year 2000 Quantity: 14 Overall dimensions of the set (W x D x H): 550 x 360 x 500 mm Equipment weight: 40 kg Incoterm: FCA Auction-ID: A1-49706-233

inv 4303 - Cartoning Machine Manufacturer: Marchesini Model: BA300 Year: 2000 – refurbished by Mipco in 2022 n/n: 121.19 REVISED 2000 For Bottle Carton format: A – 25 to 100 mm / B – 13 to 70 mm / H – 78 to 200 mm Max speed: approx. 300 cartons/min Formats: Vial screws Ø 27, vial screws Ø 30, vial screws Ø 32, vial screws Ø 75 Current cap size:  = 32mm and h = 23mm With roll leaflet ROTALEAFLET GUK R21/760 - Minimum format: 60x105mm / Maximum format: 210x315mm - Leaflet distributor: o Chuck length: 200mm o Chuck diameter: 70-80mm o Overall dimensions (LxWxH): 200x500x2000mm Overall dimensions of electrical cabinet (LxWxH): 800x600x2050mm Overall Dimensions (LxWxH): 5120x1700x1930mm Power: 3x380V+N+PE, 50Hz, 8kW Auction-ID: A1-49706-41

inv 4569 - Thermoforming machine Manufacturer: Farmo Res Model: K260/N Year: 2000 Maximum throughput: 20 cycles/minute Min/max forming depth: 11 mm / 35 mm Maximum width of the forming coil: 290 mm Maximum forming width: 267 mm Maximum feed pitch: 260 mm Minimum feed pitch: 50 mm PLC: Siemens S7-300 PLC HMI: Siemens OP17 Power consumption: 8 kW Power supply: 400V + N + PE / 50 Hz Compressed air: 6 bar, 1200 l/min Overall dimensions (W x D x H): 7000 x 2000 x 1630 mm (bulb magazine mounted) Weight: 1300 kg Moulds available (see plans in photos for dimensions): 2 x 3 trays of 2 ampoules 5741/BA 2 x 3 trays of 6 bulbs 5741/6A 2 x 3 trays of 5 bulbs 5741/7A Auction-ID: A1-49706-61

Used, functional. Including automatic roller conveyor (4000 x 1000 x 12500 mm) Including automatic chip removal (3000 x 250 x 1500 mm) Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-5

Extra options : All around LED lighting , Blue spot , Half cabin , fire extinguisher , Beacon Auction-ID: A1-40399-32

Extra options : All around LED lighting , Blue spot , Half cabin , fire extinguisher , Beacon Auction-ID: A1-40399-16

Welding table / hole table: Hole diameter: 28mm Hole spacing 100mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Ribbed underside for reinforcement. Table length 4000 mm Table width 2000 mm Hole diameter 28 mm Table height 815 mm Machine weight approx. 1.3 t Auction-ID: A7-50084-118

Machine type: Vertical machining center Control: Heidenhain, Table load: 500 kg Tool magazine: 24 places The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself. Auction-ID: A1-50085-3

Extra options : Non-marking tires , Blue spot , All-round LED lighting , Fingertip control Auction-ID: A1-40399-18

Extra options : Red spot , Non-marking tires , Led lighting front and rear , Blue spot Auction-ID: A1-40399-23

Welding table on lift table: Hole diameter: 28mm The table is made of 15mm thick steel S355 The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Sidewalls 150 x 10mm Ribbed underside for reinforcement. Table length 2000 mm Table width 1000 mm Load capacity 2000 kg Lifting height max. 1525 mm Total connected load 1.5 kW Connection voltage 400 V Condition: never used / new (5) Auction-ID: A7-50084-2

Lifting magnets 2 pcs. Load capacity 2000Kg, Magnetic area 350 x 150mm See pictures. Condition: never used / new (5) Auction-ID: A7-50084-111

Extra options : Blue spot , random lighting , Joy stick control , fire extinguisher Auction-ID: A1-40399-13

Welding Table / Perforated Table incl. accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, Plasma nitriding steel S355J2+N (St 52/3) Surface hardness 850 Vickers Grinded surfaces, Planed. Hole diameter: 28mm, Holes lowered 3mm. Grid 100 x 100mm Sidewalls 200mm Bore spacing in the sidewalls 50mm, Diagonal grid. Height adjustable from approx. 830 - 890mm Substructure reinforced with flat steel 140 x 15mm incl. bottom bearing diameter 110mm Table length 2000 mm Table width 1000 mm Table height 900 mm Table load 3000 kg Machine weight approx. 0.45 t Dimensions L x W x H 2.0 x 1.0 x 0.9 m Auction-ID: A7-50084-78

Belt sander with - Contact disc: 600 x 150 mm Belt width 150 mm Belt length 2000 mm Belt speed 33 m/sec Total power requirement 4 kW Machine weight approx. 100 t Space requirements approx. 1.2 x 0.5 x 0.85 m Condition: never used / new (5) Auction-ID: A7-50084-95

Belt sander with - Contact disc: 200 x 75 mm - Continuous surface grinding table: 75 mm Belt width 75 mm Belt length 2000 mm Belt speed 37 m/sec Total power requirement 3 kW Machine weight approx. 0.105 t Space requirement approx. 1.2 x 0.5 x 1.0 m Condition: never used / new (5) Auction-ID: A7-50084-207

Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Very stable base, This allows the table with pallet truck. The accessories shown are optional Table length 2000 mm Table width 1000 mm Table height 850 - 900 mm Machine weight approx. 0.45 t Condition: never used / new (5) Auction-ID: A7-50084-88

Welding table / straightening table - Panel thickness 150mm - M20 thread on the plate and in the sidewalls Table length 2000 mm Table width 1000 mm Table height 660 mm Machine weight approx. 0.98 t Dimensions L x W x H 2.0 x 1.0 x 0.66 m Auction-ID: A7-50084-150