129,243 used machines on RESALE, but how to find them? Machine Search
specifications: - Drilling capacity approx. 32mm - Drilling spindle holder MK 3 - Projection 70 mm - Hub approx. 175mm - 8 speeds approx. 10 - 420 rpm - Drive 42 V / 960 watts - Magnetic base 100 x 220 mm - Magnetic base left + right swivel drill carrier - Space required approx. W 300 x H 700 x D 460 mm - Weight approx. 49 kg - Safety transformer – separating transformer make FEIN , type ESB 1000 - Primary current 220 V - Secondary current 42 V - Space required approx. W 300 x H 350 x D 350 mm - Weight 27 Kg
Fixing plate, magnetic table pair for sale. It can be attached with screws to an injection molding machine, machine tool or elsewhere. This allows an injection mold or other iron with a maximum size of 245x230 mm to be attached.
El. Magnetic clamping plate, magnetic disk Magnetic table, clip Magnetic clamping plate Dimensions: Width x Length x Height (approx. 250 x 500 x 190 mm)
width: 395 mm length: 2960 mm output height: 130 mm efective widths: 385 mm Pole center: 400 mm drive motor: Drehstrom The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 300 mm width: 150 mm height: 90 mm voltage: 24 V weight of the machine ca.: t dimensions of the machine ca.: m Power connection 24V / 2,8 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
-Thermal oil magnetic pump with motor -Pump manufacturer Sterling Fluid Systems Model: ZTTZ 40160 / AP 1EO 1B 2 Engine see pictures
Butterfly valve, flap valve, solenoid valve, solenoid valve -Manufacturer: Asco, two-way solenoid valve -Type: SCG262C022 -Connection: 1/4 -Number: 1x valve available -Dimensions: 70/40/H60 mm -Weight: 0.4 kg
Magnetic drill, hand drill -Magnetic base: Magnetor type PS 32 L -Drilling machine: AEG type HBE-IV - Recording: MK2 -Max. Drill: Ø 23 mm -Connection: 265V/200Hz -Dimensions: 700/300/H670 mm -Weight: 49 kg
Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, slide valve, directional valve -Magnetic valve -Type: 10897 MFH-5/3E-1/4-D-1 -Working pressure: 3.5-10 bar -Number: 8x valves available -Price: per piece -Dimensions: 165/90/H40 mm -Weight: 0.6 kg/piece
Magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Clamping surface: 100 x 100 x 300 mm -Dimensions: 100/100/H360 mm -Weight: 18.4 kg
electric magnetic plate, chuck, magnetic chuck, magnetic chuck -Clamping surface: 1000 x 255 mm -Connection: 100 volts DC -Dimensions: 1000/255/H98 mm -Weight: 140 kg
Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, directional control valve -Magnetic valve -PN: 2-10 bar -Number: 2x available -Price: per piece -Weight: 0.2 kg/piece
new
Boring power: 35 mm turning speeds: max. 810 U/min core drilling diameter max.: 35 mm tool taper: Weldon 19,05 mm bore stroke: 210 mm weight: 11 kg connected load frequency: 230 V engine output: 1,6 kW Dimensions (LxWxH): 0,4 x 0,25 x 0,275 m Magnetic drill with: 2-speed motor. Coolant system. Robust mobile storage / carrying bag. MAGNET HOLDING FORCE 1800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, directional control valve -Magnetic valve -PN: 2-10 bar -Number: 2x available -Price: per piece -Weight: 0.06 kg/piece
Safety control, protective door switch magnetic -Type: PSEN2.1p-21/PSEN2.1p-20 -Number: 1x available -Price: per piece -Weight: 0.1 kg
Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Manufacturer: Festo -Type: MFH-5/2-D-2-FR C -Magnetic valve -PN: 3-10 bar -Number: 1x valve available -Price: per piece -Weight: 0.62 kg
Magnetic coil, electromagnet, traction magnet -Type: MSFG-24/42-50/60-0D -Connection: 24 V DC 4.5 W -Price: per piece -Number: 14 available -Minimum order quantity: 3 pieces -Weight: 0.1 kg
Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Magnetic valve -Series: W402 -Weight: 0.9 kg
Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate -Magnetic plate: clamping surface 800 x 250 mm -Voltage: 110V 1.7A -Transport box: included -Quantity: 1 piece available -Dimensions box: 1160/480/H250 mm -Weight: 112kg
5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve -Manufacturer: Festo, solenoid valve -Type: CPE14-M1BH-5J-1/8 -PN: 2 - 8 bar -Dimension: 135/15/H40 mm -Weight: 0.1 kg
5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve -Manufacturer: Festo, solenoid valve -Type: VMPA1-M1H-NP Mat. no. 533348 S302 -PN: 3 - 10 bar -Dimension: 110/40/H15 mm -Weight: 0.1 kg
Calamit Magnet Weight: approx. 65 kg Dimensions : 300 x 200 x 165 mm Shipping is of course possible. Shipping is subject to freight and packaging costs, depending on size and weight. (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
Magnetic chuck, permanent magnetic round chuck, magnetic clamp, magnetic chuck -Magnetic chuck: Permanent magnetic round chuck chuck size Ø 305 mm -Hole circle: Ø 170 mm -Receptacle: short cone 8 / cone 135 - 139 mm -Weight: 54 kg
Key data: 1000 mm, 600 mm, 90 mm
4 pieces of magnetic clamping plates with control unit
Sensor, probe, immersion probe, float switch, magnetic switch, magnetic float switch, level switch, magnetic lock switch -Manufacturer: Igema, magnetic lock switch -Type: M 510-60 -Voltage: 6-230V AC / 6-42V DC -Quantity: 2x switches available -Price per piece -Dimensions: 110/50/H170 mm -Weight: 0.4 kg
Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, magnetic holder, magnetic table -Manufacturer: Thyssen, magnetic table with pipe holder -Type: 105 662 -Pipe diameter: 45 mm -Dimensions: 220/180/H260 mm -Weight: 13.3 kg
Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, magnetic holder, magnetic table -Manufacturer: Thyssen, magnetic table with pipe holder -Type: 105 662 -Pipe diameter: 42 mm -Dimensions: 150/130/H245 mm -Weight: 5.3 kg
electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Manufacturer: Elsterwerda, magnetic clamping plate type ED 215 -Clamping surface: 200 x 150 mm -Connection: 220 Volt DC -Dimensions: 370/150/H80 mm -Weight: 14.3 kg
Magnetic roller, magnetic roller, magnetic separator, cooling water skimmer -Magnetic roller: Magnetic separator with rubber roller -Magnetic roll: Ø 130 x 310 mm -Rubber roller: Ø 68 x 310 mm -Dimensions total: 440/400/H240 mm -Weight: 26 kg
electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate, magnetic prism, magnetic prism -Magnetic prism: Magnetic measuring and clamping prism -Clamping surface: Length 120 mm -Prisms/Clamping surface: see photos -Magnet: can be switched on and off -Dimensions: 120/75/H105 mm -Weight: 4.5 kg
• Stirring volume max. 200 l • Stirring speeds 100-1,000 rpm • Mounting plate 180 x 180 mm • Effective power 80 W • Max. Shaft torque 50 Ncm • Control unit Cimarec Telemodul 40 M (stirring start, stirring time, speed) • Mounted on a mobile stainless steel frame with inclined mounting plate with counter support (format part) for mounting a vessel with Ø 235 mm • Drive 230V/50-60Hz
Stop magnet, pull magnet, eject magnet, stop magnet, locking unit -Type: 50 003-06C1 -Connection: 220 V -Magnetic force: 6.5N Price: per piece -Quantity: 2 available -Weight: 0.4 kg
Stop magnet, pull magnet, eject magnet, stop magnet, locking unit -Type: GHUZ050E13A0 -Connection: 24 VDC -Stroke: 20 mm Price: per piece -Quantity: 3 available -Weight: 1.6 kg
Magnetic coil, electromagnet, traction magnet -Type: MSN1G-24V -Connection: 24 V DC 2.5 W Price: per piece -Number: 14 available Minimum order quantity: 3 pieces -Weight: 0.1 kg
Magnetic flat bases For Nyloprint Sheets Thickness: 22.6 mm Condition: Used Format: A4 / 215 x305 mm Format: A6 / 105 x 155 mm Format: A7 / 75 x 105 mm Format: 18 x 154 mm Format: 18 x 55 mm Format: 18 x 36 mm
NON-FERROUS METAL SORTER - with vibrating feed conveyor and magnetic drums - For sorting e.g. iron, aluminium and copper - Conveyor width 500 mm - 14-pole concentric separation drum - Sturdy PVC strap - With control cabinet, 2 frequency converters for the band and the separation drum - Color according to customer requirements - New machine made in the EU
Key data: 500 mm, 200 mm, 77 mm
Binder 500x200 Complete System Electric 220V Magnet Clamping Plate Milling Grinding Total weight approx. 50 to 60 kg. Good used condition, full function. Includes switch and control cabinet. The connection on the control box can be connected directly to 220 volt luminous flux and can therefore also be used universally on the milling machine. The actual magnet has 110 volts. Very long power cord, about 7-8 meters. The rotary switch only works to the right. That is how it should be. Always switches every 180 degrees every function. You will receive an invoice in paper form. Differential taxation according to paragraph 25a of the German VAT Act. Therefore, no VAT is shown on the invoice.
TECHNE MCS-102L 2-Position Magnetic Laboratory Shaker New equipment in its original packaging Reference : MCS-102L This magnetic stirrer is designed for optimal suspension cell culture and the use of micro-carriers. The MCS-102L accommodates 2 x 1 liter culture flasks Speed range from 0 to 80 rpm Soft start and stop for slow acceleration and deceleration Interval setting option Stainless steel stirrer platform with culture flask markings Designed to operate in an incubator up to 40°C and 95% relative humidity Type: magnetic, rotary Display: Analog Applications: of biological samples Rotational speed: Max: 80 rpm (503 rad.min-1) Min: 0 rpm (0 rad.min-1) Temperature range: 40°C (104°F)
Magfuge HEATHROW Centrifuge / Magnetic Stirrer - Grey / Purple New equipment in its original packaging 3L centrifuge and magnetic stirrer in one device Part Number: 120581 Dimensions: 23.5 x 18.5 x 12 cm Ambient conditions: Operating temperature: 2 to 40 °C Weight: 1.85 kg Colour: Grey / Purple Agitator detail: Plate Ø: 130 mm Stirring capacity: 3 l Speed: 50-999 rpm (1 increment); 1000-2500 rpm (5 increments) Timer: -> shake mode 30 seconds to 60 minutes or continuous (5 second increments) Oscillation mode -> 1 second to 60 minutes or continuous Oscillation mode -> 30 seconds to 15 minutes Centrifuge Detail: Rotor 12 tubes 1.5/2ml or rotor 6 tubes 5ml Speed: 500-999 rpm(1 increment); 1000-5000 rpm (5 increments); 5000-12500 rpm (25 increments) Timer: 30 seconds to 30 minutes (5 seconds increment) Comes with: a rotor for magnetic stirring 1 rotor for ...
diameter:400 mm total power requirement:110 V, 125 W weight of the machine ca.:72 kg
Equipped with: 3x magnetic drill, 1x toolbox with contents of various drills
maximum number of results exceeded
please refine your search
10 € 
