mag used for sale

MÄGERLE FPA 12 S41 ist eine Flachschleifmaschine mit hoher Präzision und Zuverlässigkeit. Tisch 1250×240 mm, Schleiflänge 1200 mm, Breite 370 mm; X 1330 mm, Y 270 mm; Tisch–Spindel 130–600 mm. Scheibe Ø300×50 mm, Bohrung 127 mm, bis 2180 1/min; Tischgeschw. 3–30 m/min; 3x380 V 50 Hz; Gewicht ~4000 kg; Maschine 3700×1750×2450 mm. Zubehör: Magnetplatte 700×200 mm, Rollenprofilierer, Werkzeugschrank, Satz Schlüssel, automatische Zustellung. Erreicht enge Toleranzen bei Präzisionsteilen. Technische Daten ohne Gewähr

MAGNAGHI RSC 350 ist eine Spitzenloseschleifmaschine, konzipiert für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazität: Schleif-ø 2–85 mm; Hauptscheibe ø350×120 mm (Bohrung 200 mm); Regelscheibe ø250×120 mm (Bohrung 150 mm); Drehzahlen bis 1800 U/min, Regel 18–250 U/min. Daten: 50 Hz 3×380 V; Hauptmotor 10 CV; Gewicht ~2000 kg; Maße L1800×B1000×H1800 mm. Zubehör: Satz Lineale, Lampe, Auswuchtgerät Gt Elettronica VM 23, 2 Abrichtvorrichtungen. Erreicht enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

CHIRON FZ 08 KS Magnum ist ein 3-Achsen Bearbeitungszenter, ausgelegt für hohe Präzision, Genauigkeit und Zuverlässigkeit. Tisch 770×290 mm; Verfahrwege X450 Y270 Z310 mm; Bohren 12 mm; Magazin 24 Plätze, Ø Werkzeug 47/100 mm, Länge 160 mm. Spindel HSK-A40 bis 30.000 min-¹, Eilgang 75 m/min, Spindelmotor 7 kW, Leistung 14 kW (19 kVA), 3×400 V, Druckluft 6 bar; Abmess. 2308×1405×2447 mm, Gewicht ~3400 kg; Werkzeugwechsel 0,8/2,3 s, Chip-to-chip 2,2 s. Ausstattung: Werkzeugbruchkontrolle, RS232, Schaltschrankklimagerät, Zustandsleuchte. Für enge Toleranzen in Automotive, Luftfahrt, Medizintechnik, Uhrenbau und Werkzeugmaschinen Technische Daten ohne Gewähr

HEDELIUS RS 60 MAGNUM-2000 ist ein 5-Achsen Bearbeitungszenter, ausgelegt für präzise Bearbeitung, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazitäten: Tisch 1.200 x 600 mm (Ø 680 mm), max. Werkstückgewicht 300 kg; Verfahrwege X 2.000 (600) mm, Y 620 mm, Z 520 mm, Schwenkwinkel A +15 / -95°. Technische Daten: Spindelaufnahme SK40, 50–12.000 min-¹, Drehmoment 121 Nm; Vorschub 0–45.000 mm/min, Eilgang 45 m/min, Vorschubkraft 7.000 N; Anschluss 3x400 V 50 Hz, Gesamtleistung 25 kVA; Maschinengewicht ~11.000 kg, Abmessungen 5.400 x 4.300 x 3.000 mm; Werkzeugwechsel 3 s, Werkzeug Ø max 80 mm, Länge 330 mm, Gewicht 8 kg. Ausstattung: Werkzeugmagazin 56 Plätze, Kühlmitteleinrichtung 1.250 l, Hochdruck 80 bar, Renishaw Taster, Späneförderer, Ölnebelabsaugung, Schaltschranks-Klimatisierung, Vollverkleidung. Ermöglicht enge Toleranzen; geeignet für Automotive, Luftfahrt, M ...

CHIRON FZ 08 KS Magnum ist ein 5-Achsen Bearbeitungszenter, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Verfahrwege X450×Y270×Z310 mm; Bohren 12 mm; Gewinden M8. Magazin 24 Plätze, Ø Werkz. max 47 mm (100 mm frei), L 160 mm, Werkz.-Gew. 1,2 kg. HSK-A40 0–36000 rpm; Spindel 7 kW; Eilgang 75 m/min; 3×400V 50Hz; Druckluft 6 bar; Leistung 14 kW (19 kVA); Gewicht ~3400 kg; Maße 2308×1405×2447 mm. Ausstattung: Werkzeugbruchkontrolle, RS232, Klimagerät Schaltschrank, Statusleuchte. Eignet sich für enge Toleranzen in Automotive, Luftfahrt, Medizintechnik, Uhrenbau Technische Daten ohne Gewähr

COLCHESTER Magnum L.B.800-4000 ist eine Mechanikerdrehbank hoher Präzision, für gesteigerte Genauigkeit und Zuverlässigkeit. Kapazität: Spitzenhöhe 380 mm; Spitzenweite 4000 mm; Drehdurchmesser 520/740 mm; Spindelbohrung 168 mm; Pinolenhub 190 mm. Daten: Spindel Ø95 mm; 20 Stufen 10–800 t/min; Motor 15 kW; Gewicht ~5200 kg; L5920×B1200×H1500 mm. Ausstattung: digitale Anzeige 2 Achsen; 3-Backenfutter Ø500 mm; aufklappbare Lünette; Kühlung; Schnellwechsel MULTIFIX; Lampe; Bohrreiter; Drehfutterschutz. Für enge Toleranzen; Einsatz: Automotive, Luftfahrt, Werkzeugbau, Medizin, Uhren Technische Daten ohne Gewähr

Technical Parameters Category: Used butchering machines Subcategory Mechanical processing of meat Type Frozen Meat Slicers / Guillotines Height 1750 mm Width 1100 mm Length 2550 mm Electrical Supply: 400V 50Hz 3N Main Material Stainless Steel, Acid Resistant Description Working width 500 mm

AGICOM recycling machine trade: Used eddy current separator Eddy Current from Goudsmit

Height=1.8 m, Overall length= 1.83 m, Overall width= 1.12 m, Net weight= 762 kg,

- Producer Elmag Superfici - Type Magnum 3.2.2 - Year of construction 2008 (2010) - Working width 1.350 mm - Working height 900 mm + - 20 mm - Operating side, right - Actual condition, machine is not overhauled - Duo gun drive system - Spraying gun carrier independently controllable - Dry filter system - Exhaust air 13.500 m³/h - Transport belttransport System - Feed speed adjustable bis 18 m/min - 2 belt cleaning units - Belt cleaning system with roller - Belt cleaning system, behind the machine - Lacquer reclaiming system with v -belt - Gun control system - PLC control with touch screen - Number of installed lacquer circles 2 Stk. - Supply air box - Length ~ 6.680 mm - Width 4.455 mm - Total connection power ~ 26.3 KW - Voltage / HZ 400 / 50 - Location, not on stock - Voltage fluctuation max. +/ - 5 %

We are selling here a remaining stock of underfloor heating hose from our new halls. A total of 408 meters. Brand: Uponor Magna Pipe Plus, 20x2,0mm. On pallet. We will be happy to answer any further questions you may have. We have placed more ads under ETW. In the CHP area.

CNC Machining Center Hedelius Forte 7-2600 Magnum Control: Heidenhain TNC 640 Year of Make: 2020 Availability: in stock Internal machine no. 73 Travels: X-axis 2,600 mm Y-axis 750 mm Z-axis 800 mm Pendulum operation: 2 x 1,000 mm Total clamping surface 2x 1,490 x 750 mm Table load: approx. 2,500 kg Mount: HSK 63 Tool magazine: 50 compartments Spindle speed: 50 - 18,000 rpm Drive power: 35 kW Facilities - Inclined bed coolant system 900 l - Chip conveyors - 2x dishwashing gun - Electronic handwheel - Partition wall prepared - High pressure pump 60bar - 0-point clamping platens - Vises and tools as required - Prepared for work space partition wall

We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95. The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box. Also some tool pots are damaged. Can be repaired or used as spare parts

faceplate diameter:800 mm power requirement:110 kW weight of the machine ca.:37.000 / total 52.000 t transport measurements machine:5,07 x 2,98 x 3,90 m clamping diameter:800 mm :Ø 800 x 720 mm Tool bore:Capto C6 tools in tool magazin:2 x 80 With C-Axis

travel -x axis:800/1825 mm travel -y axis:800/460 mm travel -z axis:600 mm Feeding X,Y,Z up to:0 - 40/40/40 mm/min. swival range +/-:+10 bis -90 x 360 Grad Rotary-table:800 x 630 mm number of T-slots:5 T-slot - distance:125 mm T-Slots:18 mm center hole:30H7X15 mm swival range +/-:90 Grad turning speed:20 m/min. Number of axles:3-7 St. Spindle RPM:12.000 1/min max. tool weight:10 kg max. tool length:330 mm diameter of tools max.:80 mm tool changing time:4 sec CNC control with 15.1" color flat-screen 19" machine control panel PCU 50 with Intel Pentium II Windows XP 10.0 GB hard drive

Sliding Belt Magnetic Conveyor, Magnetic Slide Conveyor GÖSSLING Z-Conveyor, Sliding Belt System, Conveyor Belt, Magnetic Belt ConveyorMasch. No: 21113628 02 / 2053405 60 Year of construction 2002 / 2016 overhauledSlide width 255 mmDistance of permanent magnets 270 mmInsertion length approx. 1000 mmInsertion height 200 mmSlide-in width 390 mmConveying height - discharge height approx. 1000 mmConveying speed approx. 15 meters/min. Motor power belt drive approx. 0.55 kWNe-connection 400 volts, 50 Hz- Circulating chain equipped with permanent magnets- Overall height

Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbHZ conveyor, sliding belt system, conveyor belt, magnetic belt conveyorType no.: MBF 326P31,75 Containment no.: 44489-10 Year of construction 2017Slide width 300 mmDistance of permanent magnets 250 mmInsertion length approx. 3400 mm (up to assembly box)Insertion length approx. 3900 mm (without assembly box)Insertion height 210 mmSlide-in width housing 370 mm Insertion width Thread mounts for adjustable feet 410 mm Insertion width on the assembly box 470 mm Discharge head - discharge height approx. 1040

Auction-ID: A7-49124-21

Length: 350 mm Width: 150 mm Polarity ~ 9 mm Space requirement approx.: L: 440 x W: 210 x H: 135 mm Voltage: 24V Power: 2,04A

sell used pallet magazine by Kettner, very good condition

Tiede Universal U550 GW Magnetic Electric Crack Detector Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic Electric Crack Detector Rated operating current I 5400 A AC seats or 3800 A AC effective, adjustable in 8 steps Flow Ø: 8000 Aw full wave DC. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetization coil lights Ø 800 Bushing Ø: 5000 Aw with alternating current adjustable in 8 stages, chamois according to DIN 54131 Year of construction 1984 Accessories/special equipment Electronic magnetization controls Degaussing device Support rolls Blackout cabin Main machine dimensions Total length mm 8.000 Total width mm 2,500 Total height mm 2.500 Scope of work Remarks Nominal diameter mm ~5.500 Field of application: Testing of crankshafts. Item condition: used Further technical data can be found on the machine  ...

Magnetic flow filter, MagnaClean CMX Nano, FL1-03-05010, Adey, new Special price The current price of a similar product is appr. € 3.000. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Residential and commercial magnetic flux filters for heating & cooling water. Treatment Maximum operating temperature: 150°C Maximum operating pressure: 10 bar Recommended flow rate: 30l/min to 225l/min The 316L stainless steel MagnaClean CMX filters offer adaptable, market-leading water system filtration and a fully flexible, customised approach to commercial and industrial heating and cooling water system requirements. 6 months warranty We give you 6 mo ...

Saeed empty pallet magazine with roller conveyor

Machine type MIG/MAG welding system Make Merkle Type RedMIG 1600 K Connection voltage 1 x 230 volts Setting range 25 - 160 amperes Switch-on time 30% ED at 160 amperes 60% ED at 130 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roll drive Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 620 mm Weight 65 kg Age 12 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire, D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece glass 90 x 110 mm white 1 piece protective glass 90 x ...

Magnetic plates for letterpress; 3x A4 available (format 306x217x22mm); 3x A5 available (format 217x153x22mm); 6x A6 available (format 153x108x22mm).; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 3000 D Connection voltage 3 x 400 volts Setting range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current setting 14 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Execution of mobile industrial plant with separate DV case Wire feed 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 940 x 445 x 1,040 mm Weight 140 kg Special accessories VB-cable 1.6 mtr. Long Age 9 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece pro ...

Manufacturer: Verleimteil IMA, Ersatzteil aus Maschine: Neuwertig,

Length: 600 mm Width: 300 mm

Manufacturer: Homag Sonderverleimteil Schrägkante, Spare part from machine: Homag, Type: Verleimteil, Year: 1999, Year :1999

Manufacturer: IMA, Spare part from machine: IMA AVM, Type: Verleimteil, Gluing part left side: yes,

Manufacturer: IMA, Spare part from machine: IMA Compact, Type: Verleimteil, Gluing part left side: yes,

Manufacturer: IMA, Spare part from machine: Compact, Type: Verleimteil, Roller size: 0,8 l, Gluing part left side: yes,

Magnetic chip conveyor of a PFAUTER PA320 can be used universally. Length 135cm

Manufacturer: IMA, Spare part from machine: Compact, Type: Verleimteil, Roller size: 0,8 l, Gluing part left side: yes,

Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 320 K Plant No. 118.362 Connection voltage 3 x 400 volts Setting range 25 - 320 amperes Switch-on time 40% ED at 300 amperes 60% ED at 270 amperes 100% ED at 240 amperes Current setting infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Design portable assembly system Wire feed gearbox 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Weight 32 kg Age 6 months Condition workshop-tested new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 pie ...

Electrical magnet size 1000 x 300m 110 volt supply IP 66

Used Electromagnetic clamping plate , from ABA grinding machine Technical data: Length: 600 mm Width: 300 mm

Machine type MIG/MAG welding system Make Merkle Type RedMIG 1600 K Connection voltage 1 x 230 volts Adjustment range 25 - 160 amperes Switch-on time 30% ED at 160 amperes 60% ED at 130 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 2-roll drive Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 620 mm Weight 65 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr long, 25 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll of welding wire, D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of lens 90 x 110 mm white 1 piece of protecti ...

MIG/MAG hose package -MIG/MAG hose package: water-cooled -Length: 4.0 m -Weight 3.4 kg

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2800 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 30% ED at 280 amperes 60% ED at 210 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 80 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box, kpl ...

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Adjustment range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 2-roll drive Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch, 3 mtr. Long 1 piece ground cable 4 mtr. Long 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box ...

Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Plant No. 123.035 Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 2 years Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon w ...

Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 12 months Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon with 2 pressure gau ...

Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 180 K Connection voltage 1 x 230 volts Adjustment range 25 - 180 amperes Switch-on time 20% ED at 180 amperes 60% ED at 110 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 2-wheel transmission Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special accessories ColdMIG welding process E-welding, MIG soldering Filling wire welding Weight 17 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-200 coil, 5 kg 1 can  ...

Machine type MIG/MAG inverter welding system with bi-power setup Make Merkle Type MobiMIG 280 K - BiPower Connection voltage 230/400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Bi-Power Setup Weight 27 kg Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reduc ...

MIG/MAG hose package -MIG/MAG hose package: water-cooled -Length: 3,45 m -Weight 3 kg

MIG/MAG hose package -MIG/MAG hose package: water-cooled -Length: 4.2 m -Weight 3,8 kg

Machine type MIG/MAG welding system Make CEBORA Type MIG STAR 550 S Plant No. 991502 Connection voltage 3 x 400 volts Setting range 40 - 500 amperes Switch-on time 60% ED at 500 amperes 100% ED at 390 amperes Current setting 32 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed gearbox 4-wheel drive Fuse 32 Ampere Dimensions L x W x H 1,000 x 500 x 1,250 mm Weight 190 kg Age approx. 25 years Condition workshop-tested, good, incl. UVV test protocol Special accessories 3 x throttle pick-ups Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 piece user manual Warr ...

MIG/MAG hose package -MIG/MAG hose package: water-cooled -Length: 4.0 m -Weight 3.5 kg

Machine type MIG/MAG welding system Make Merkle Type CompactMIG 220 K Connection voltage 3 x 400 volts Setting range 25 - 220 amperes Switch-on time 40% ED at 220 amperes 60% ED at 170 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-wheel gearbox DV 26 Fuse 16 Ampere Dimensions L x W x H 870 x 480 x 740 mm Weight 90 kg Special Accessories Display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield  ...