mag plastic used for sale

VACUUM MASSAGER, INJECT STAR TYPE: MAGNUM 2600 Technical description: Serial number: 559 Capacity: 2600 l Power supply: 380-440V/50-60 Hz, 3ph Power: 7 Kw Drum size: 1300 x 2450 mm Dimensions: 3200 x 1500 x 1950 mm

VACUUM MASSAGER, INJECT STAR TYPE: MAGNUM 2600 Technical description: Serial number: 3730 Capacity: 2600 l Power supply: 380-440V/50-60 Hz, 3ph Power: 7 Kw Tumbler dimensions: 1300 x 2450 mm Dimensions: 3270 x 1850 x 1900 mm With this machine you are in a position to massage meat at any time, fully automatically and at maximum, so that the general appearance and flavour is improved, as well as the structural loosening up of the meat and the essential assimilation of both the natural juices and injected brine, by binding in, is achieved. HOMOGENEOUS BRINE DISTRIBUTION Sealing-in of Protein: The binding of the surface cells, seals off the inner moisture and prevents drying out. Optimum Protein-Water-Ratio: Whether you massage ham, shoulder, loin, tongue, belly, brisket or rough and fine fillings for cooked, boiled, raw and preserved sausage, whole chickens or chicken parts, fish or othe ...

; Gross weight [kg]: 2950; Inspection Date: 2026-02-06; Amount of previous owners: 1; Lift height[mm]: 920; Maximum lift capacity [kg]: 200

Radial saw MAGH-OMGA RADIAL 700, engine hp 3 , reach 700mm Not to CE standards, for export

Cutting height: 60 mm saw-blade dia.: 350 mm Motor output: 5,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 530 mm y-travel: 600 mm z-travel: 300 mm 0: 7 bar Air consumption: 70-90 Nl/min. voltage: 120/230V+-5% kVA total power requirement: 1,5 kW weight of the machine ca.: 22 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wire-O closing machine Make JBI Model MAG C54 Year 1991 Workingwidth 540 mm Details for closing all sizes Available Direct

serial no.: 1800 Dimensions (L/W/H): 70x70x120 cm Wire-O-System (closer only) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ID2955 Key Maker Magic 1211 year/Year of construction 1984 Manhole finisher, 1 piece Magic 1211, with 2 Atlas 300 + 400 molds, 2 palisade molds, 1 built-in mold, 1 vibrator incl. FU, various base sleeves Shaft paver, 1 piece Magic 1211, with 2 pieces of moulds Atlas 300 + 400, 2 pieces of mould palisades, 1 piece of mould installed, 1 piece of vibrator incl. FU, various lower sleeves

Aluminium angled conveyor belt with substructure incl. adjustable feet as well as machine feet for levelling unevenness horizontal area: 1,500mm Rising Area: 4,000mm Angle of inclination in bend 45° Discharge height: 3,000mm Height of horizontal: 200mm Execution: Aluminum construction - 2-fold profile reinforced 90x45mm Drive roller + deflection roller S235 steel welded and machined Ø100x420mm convex overtightened, shaft fixed with tension bearings. Propulsion: Slip-on geared motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge PU petrol matt Conveyor belt width: 400mm 2 pcs. corrugated edges 50 high, 35mm wide, high-frequency welded 28 T-40 cleats, approx. 400mm pitch Belt mate ...

Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm Ziruu8vxy Rising area 2,400mm Angle in bend 45° Feed height: 300mm Discharge height 2,000mm Total conveyor belt length measured on the floor: 4,200mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Propulsion: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x35mm 25 pcs T-40 cleats - 396mm pitch 2-ply particularly transversely stable Usable width: 290mm, results as follows: Transverse arrangement 70+35+290+35+70mm ONLY AS LONG AS STOCKS LAST All our prices are net prices plus VAT. - can a ...

Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm Ziruu8vxy Rising area 2,400mm Angle in bend 45° Feed height: 300mm Discharge height 2,000mm Total conveyor belt length measured on the floor: 4,200mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Propulsion: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x35mm 25 pcs T-40 cleats - 396mm pitch 2-ply particularly transversely stable Usable width: 290mm, results as follows: Transverse arrangement 70+35+290+35+70mm ONLY AS LONG AS STOCKS LAST All our prices are net prices plus VAT. - can a ...

SPECIFICATIONS Inlet opening mm: 1000 x 720 Installed capacity KW: 18.5 Voltage: 380 volts Hourly output: 300 kg Screen diameter mm: 10 Hydraulic pump 13 cm3 - 1000 rpm Complete with control cabinet and cover

Wire electrode, welding wire -Welding wire: without type designation -Diameter: 1.0 mm -Dimensions: Ø 300/100 mm -Weight: 15.3 kg

Aluminium angular conveyor belt with substructure incl. adjustable feet as well as machine feet for levelling horizontal area: 2,500mm Rising Area: 800mm Angle of inclination in bend: 40° Conveyor belt total length: 3,100mm Discharge height: 700mm Height of horizontal: 320mm PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Propulsion: Motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz IP54 protection Drive etc. ready for connection, motor 2 pcs. scalloped edges 80x45mm 2-ply particularly transversely stable Usable width 370mm

Permanent Overbelt Magnetic Separator TYPE PEM1200 1200 x 550 x 200mm = 4x eyebolt for suspension Drive roller + deflection roller S235 steel welded and machined Ø150x300mm convex overtightened, shaft fixed with tension bearings. Two-hole flange bearing UCFL with grease nipple, sealed bearing cage Propulsion: Slip-on geared motor GEMOTEG 0.18KW, speed 0.4m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt endless GB30 black matt 7 x T20 cleats high-frequency welded High-quality 3-fold aluminum construction 2 side mudguards V4A Magnet dimensions: 700x230x120mm magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole shoes.

Aluminium Z-conveyor belt incl. substructure Horizontal range 1,200mm (customizable) Rising range 3,000mm (customizable) 2nd horizontal range: 1,200mm (customizable) Angle in the bend 45 degrees each Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable (can be moved) Conveyor belt width 700mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 80x50mm T-65Studs - 150mm 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is currently ap ...

Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium flat conveyor belt without substructure Horizontal area 6,000mm (customizable) Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable, machine feet Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PVC conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control Scalloped edge: 80x50mm flush with both sides Centrally welded T75 studs 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is currently approx. 2-3 w ...

Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium flat conveyor belt incl. substructure Horizontal range 5,000mm (customizable) Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable, machine feet Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Scalloped edge: 80x50mm flush with both sides 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is curr ...

Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure Horizontal area 800mm Rising range 2,000mm Angle in the bend 45° Feed height: 300mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edges, blue FDA- Food compliant, food certificate is included Drive: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional Freely steerable transport rollers incl. parking brake Scalloped edge: 50x35mm T-40 cleats - approx. 300mm pitch 2-layer particularly transversely stable Usable width: 290mm, results as follows: Cross arrangement 70+35+290+35+70mm All our prices are net prices plus VAT. - can also be viewed under power after consultation!

Aluminium Z conveyor belt incl. mobile substructure Horizontal range 800mm (customizable) Rising range 2,000mm (customizable) 2. Horizontal range 800mm (customizable) Angle in the bend variable, infinitely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 0.55KW ( customizable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 Cleat - 400mm pitch 2-layer particularly transversely stable The delivery time of an individual system is currently approx. 3-4 weeks, depending on the production effort. Our core competence lies  ...

Bottle filler, make MAG, type: RPe 12/3, for 2.000 bph, short pipe filler pre-evac, runs on 0,5 lt. EURO-bottles, l ->r, built 1994.

Labeller, make. MAG, for 2,000 bph, with 1 unit, run on 0.5 lt. EURO bottles, l -> r, built 1994.

wire electrode, welding wire, welding wire -Manufacturer: Magmaweld, MAG wire electrode SG 2 CY 4243 -Type: MG 2 Ø 1.2mm -Dimension: Ø 300 /100 mm -Weight roll: 15.5 kg -Number: 1 piece available

Magnopro I-CUT12090 Fully automatic die-cutting + creasing of folding cartons Year of construction 2022 Connection 230 V Material thickness depending on model: 10 mm Data format PLT, DXF, HP/GL, PDF, EPS Feeder Sheet feeder for suction air/unwinding device (opt.) max. format: 90 x 120 cm Dimensions W x D x H: 320 x 150 x 115 Alignment CCD Camera System Speed up to 1000 mm/sec Positioning suction belt Programming barcode reader, QR code Accuracy +/- 0.1 mm Bow and roller feeder !

For sale is a well-preserved bottle washing machine of the MAG brand. The machine was in use until about 4 months ago and is available now. Specifications: - Capacity: 9,000 - 18,500 bottles/hour - Year: ca. 1985 - Bottle cells for 0.5 litres, NRW, Vichy - Water baths/headboard made of stainless steel - Dimensions (LxWxH): 8,800x2,900x3,1600mm

Maximum plate format 1422 x 1804 mm, incl. Automatic Pallet Loader APL 1 segment, inline punch, online processor Glunz & Jensen 165 HDX Immediately available, price ex location on request, delivery worldwide

Vacuum pump, rotary vane pump -Drive: 1.1 kW -Flow rate: m³/h -Max. Pressure: mbar -Speed: 2800 rpm -Input: 2x Ø 35 mm -Output: 2x Ø 35 mm -Price: per piece -Number: 1x available -Dimensions: 470/300/H315 mm -Weight: 33 kg

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Cutting jaws: 1/2 , 3/4, 1 , 1 1/4, 1 1/2 -Dimensions: 510/360 / H240 mm -Weight: 64 kg

Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1/4 - 2 -Dimensions: 510/360/H240 mm -Weight: 64 kg

Oil filter system, oil purification system, oil transfer system, hydraulic unit, hydraulic pump, hydraulic pump, hydraulic test pump -Magnetic filter -for: hydraulic and other oils -electrical control -Dimensions: 820/420/H1030 mm -Weight: 70 kg

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Solideal, solid rubber tires Magnum with rim -Tire size: 18x7-8 -Bolt circle: Ø 140 x 18 mm -Recess: Ø 100 mm -Number: 2x tires available -Shipping/Price: complete -Dimensions: Ø 380 x 160 mm -Weight: 23 kg/pcs

Vertical CNC Machining Center Chiron FZ 08K S Magnum SK with NC swivel head, rotary table package, bar loader, and removal device. - Operating Hours: 30,682 h - Last Spindle Replacement: 10/2021 Technical Data: - Control System: Siemens 840D (PCU 20 / NCU 572.4) - NC Swivel Head: Swivel Range -20° / +115° - Motor Spindle: Water-cooled, 15,000 RPM - Travel Paths: X 450mm / Y 270mm / Z 310mm - Rapid Traverse (X/Y/Z): 75 m/min. / Acceleration X 1g / Y 1.5g / Z 2g - Tool Slots: 40, HSK-A 40, Span-to-Span Time 2.6 sec. vertical Additional Equipment: - Preparation for Bar Processing - Rotary Table Package: AWU 160 with D105mm (Positioning Axis) - Collet Chuck: Hainbuch Spanntop D100 - Additional Device: 6th Side - Handling and Removal Device for Finished Parts - Bar Loader: IRCO SiMag 100.1-3000 (Round and Profile Material) - Flushing Gun - Machine Preparation for IKZ - High Pressure: 7 ...

We have two Marking Machines ( bar code ) available for sale Manufacturer : MAGNEMAG Year of Manufacture : 2011 Mechanical and electrical parts are from Magnemag - The writing / ink part of Videojet Romtrust Printers SA (currently Multitech Industrial SRL) Spare Parts for MAGNEMAG Marking Machine - ARTICULATION - Drawing No: 0.36.202.092 - Quantity: 1 - ARTICULATED ARM - Drawing No: 0.36.202.091 - Quantity: 1 - ARTICULATION SUPPORT - Drawing No: 0.36.202.090 - Quantity: 1 - SUPPORT 2 - Drawing No: 0.36.202.124 - Quantity: 2 - SUPPORT 1 - Drawing No: 0.36.202.121 - Quantity: 2 - CAMERA SUPPORT - Drawing No: 0.36.202.088 - Quantity: 1 - CONSOLE - Drawing No: 0.36.202.103 - Quantity: 1 - ARM - Drawing No: 0.36.202.101 - Quantity: 1 - FRAME - Drawing No: 0.36.202.085 - Quantity: 1 - LEG - Drawing No: 0.36.202.100 - Quantity: 1 Find more here - / Contact us at -

1984 Schlüsselbauer Magic 1211 Manufacturer Information: Name: Maschinenbau Schlüsselbauer Machine Details: Model: Schlüsselbauer Magic 1211 Year of Building : 1984 Voltage : 380 V Control Voltage : 24 V Connected Wattage : 50 kW Frequency : 50 Hz Weight Total : 16,000 kg Country of Manufacture: Made in Austria 1984 Ernst Wagner KG Reutlingen HGU 3000 Type: HGU 3000 Load capacity: 3,000 kg Year of construction: 11 / 1984 Weight without battery: 4,410 kg Weight with battery: 6,410 kg Battery weight: min 200 kg / max 200 kg Find more here - / Contact us at -

For sale is a bottle cleaning machine from the manufacturer MAG. The machine is fully functional and runs without any problems. The system has been regularly serviced and is ready for immediate use. Specifications: - Manufacturer: MAG – Schymanski - Type designation: E-SPLX 12-D - Year of construction: 1998 - Capacity: approx. 5,000 bph -Wreath: 0.50 l Euro bottle 0.50 l NRW bottle 0.50 l swing-top bottle 0.33 l gourmet bottle 0.33 l longneck bottle 0.33 l Vichy bottle - Material: complete V²A - Equipment: continuous operation – rotating spray shafts - Water softening system

Height 2000 mm Width 1900 mm Length 4000 mm Capacity 2600 l Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant Barrel Aeration Valve Yes, Manual Valve Variable speed control of the tumbler Smooth adjustment of the barrel speed Tumbler with cooling jacket No Loading Loading integrated into the machine Load 1800 kg

Control: Heidenhain iTNC 530 Travel: X-axis F/H: 3,220 / 2,600 mm Y-axis 800 mm + 65 mm Z-axis F/H 850 / 1,000 mm T-slots 7 pieces Mount: SK 40 Tool magazine: 100 – compartment Spindle speed: 50 - 12,000 rpm Equipment - Internal cooling (IKZ) 20 bar - Belt filter coolant 1250 l -Conveyor - Laser Tool Control System TM200 - Rinsing gun - Electrostatic exhaust air filters - Electronic handwheel -Partition - 2x LTA suction - Prepared for 5th axle

Manufacturer: Steinert Type of Machine: Wet Drum Magnetic Separator Year of Manufacture: 2015 Model: WDS 92 92 [without CE package] Find more here - / Contact us at -

Burn-Drilling Rig Panel Processing Center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of manufacture: 2018 CNC Control Power source Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Auto. Revolver Tool holder: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring scribing marking: 5 to 40 mm Sheet metal dimensions min.: 1,500 x 300 mm (750 x400 mm with restriction ) Minimum dimensions of finished parts: 80 x 80 mm Sheet weight max.: 2,600 kg and 650 kg/m Feed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-position cross conveyor Number of cars: 2 pliers NC feed carriage, placed on the side 4 collets (2+2) 3 Short Stroke Cross Conveyors Working height: 1,000 mm Removal page: Discharge roller conveyor with lowerable unloading table with chute in Material c ...

Technical Specification, Will be added soon, magnetic drum separators, Mizars semi-magnetic drum separators offer ideal solutions for separating ferrous metals from bulk materials and transported products. The MDS series is easy to operate and maintain and offers energy efficiency with low running costs.

DOBOT collaborative robot Magician E6 Weight: 7.2 kg Payload: 500g Reach: 450mm Axles: 6 Repeats: ±0.1 mm New

Technical specification, Will be added soon, Overband magnetic separator, Magnetic blocks are designed to effectively remove unwanted metals such as iron and steel prior to the granulation process. They attract and remove metal particles as the materials pass underneath, maintaining product purity and protecting machinery from ferrous residue. Mizars OMS series magnetic separators offer durability and high performance in continuous operation, providing a reliable solution for industry.

Gewinde-Ø: 52 mm threading length: 500 mm thread pitch: entsprechend Hohlspindel -Ø: 54 mm spindle turning speed range: 25 - 140 U/min turning speeds:: 6 Stufen voltage: 380 V / 50 Hz main drive motor: 3 kW total power requirement: 4,5 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 1,0 x 1,8 x 1,4 m • with driven workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder,size: Z52/2B, + 21B • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Indramat Permanent Magnetmotor , Type: MAC093C-0-FS-4HC/110-A-0/WI634LX, FREETEXT1: Atlanta Getriebe, FREETEXT2: Atlanta 5844097, FREETEXT3: P 4,25, FREETEXT4: 2,9 kg, FREETEXT5: N1 1500 U/min,

Manufacturer: Ferrocontrol , Type: MAG 21/1, FREE TEXT: Diskettenlaufwerk defekt, Free text 1: ansonsten wie auf den Bildern,

Manufacturer: Siemens Permanent Magnetmotor, Type: 1 FT5076 1AF711 , Model: NOE H210 0577 S7 001,