129,238 used machines on RESALE, but how to find them? Machine Search
Injection moulding machine Krauss Maffei KM 300-1900 C2 BJ 2000
Injection moulding machine Arburg 420S 1300-350 BJ 2000 without handling
Injector for Plastics. - 30 mm spindle - Laboratory sample mold - Engine: 10 hp (7.5 kw). - Electrical panel
GAMMAMECCANICA Compac 125 mm. Construction year 1998 Including Loading conveyor belt, Metal detector, Compactor with driven haul off for reels, master dosing unit Engin Plast, Extruder 125 mm diam. 36 L/D with degassing pump d.c. Ansaldo drive 197 kW, Total installed power 501 kW motor, BD plast non-stop screenchanger diam. 200 mm, hydraulic power station, water ring pelletizer M 8500, Electrical cabinet, Type of machine: GAMMAMECCANICA PLASTIC RECYCLING LINE 125 mm.
Year: 2007 - technically efficient, ready to work – after full service - SV 530 cleaning machine - AKS 1610 welding machine - TBA-F 26/25 cooling station - WT 530 turning station - Welding dimensions: 2300 x 3500 mm - Flash limit: 0.2 – 2 mm - Seal formers
Injection moulding machine Demag erg. 250/560 840 BJ 2001
Injection Molding Nose Demag ergotech 50/370-200 BJ 2000
Injection moulding machine Engel victory 200H/200V790 comb BJ 2018
Ideal for operating a business where power outages are not desired, for example injection molding R1334 Power Generator Emergency Power Generator POLYMA/DEUTZ 80 KVA installed in a truck trailer single-axle, was used on construction sites. Dirty outside by leaves and dirt Polyma Kassel 80KVA = 16A = 64 KW,Diesel engine Deutz type F6L912 7ßKW 95hp 2000 rpm., With diesel hand pump hose in canister and pump,With cable/plug 63 A, The trailer is not soundproofed, stood outdoors for years under canopy and is accordingly polluted More detailed pictures on request
injection molding machine Angel Type: Victory 330/80 Tech Machine No: 155871 Age : 2005
Injection moulding machine Krauss Maffei KM 200-1400 C2 BJ 2000
Key data: 20000 kN
Angebot/Offer: Engel Duo 17060/2000 Viper Robot 60 approx. 4900h YOC 2021
URBAN AMS 6010 very good condition fully operational
Key data: 6500 kN, 105 mm
Location is : Latino America !
Key data: 1500 kN, 415 g/PS, 55 mm
Built in 1999 Clamping force: 150 tons. Screw diameter: 55 mm Displacement: 456 cm³ Spray pressure: 1564 bar Very good condition!
Year: 2006 - technically efficient, ready to work – after full service - possibility of mounting 3 milling heads - top and bottom chiseling - control via PLC - automatic machining process
Year: 2000 - technically efficient, ready to work – after full service - 4 heads - support arms
PLASTIC WASHING. LINE for GRAVIMETRICAL SEPARATION, including:, collection hopper, auger, STAINLES STEEL GRAVIMETRICAL SEPARATION TANK, size mm.5.800 x 1.600 ca, n.4 moving rolls, sinking screw, drained screw for collection of floating material, n.2 additional sinking screws, lifting screw for sunk material, n.2 TECNOFER CENTRIFUGAL DRYERS in sequence, 18,5 kw, 720 x 1.500 mm, connection screws, collection hopper, sucking unit, The line is offered as is, where is, Vertical mixer available separately, capacity: ca.500 kg/h depending on material and contamination
Key data: 4000 kN, 763 g/PS, 60 mm
Year of Make: 2000 Clamping force: 400 tons. Shot volume: 848 cm³ Screw diameter 60 mm Injection pressure increased: 2,421 bar Good condition, immediately available
Key data: 450 kN, 80 g/PS, 30 mm
Year of Make: 2001 Clamping force: 45 tons. shot volume: 99 cm³ shot weight: 80 gr./PS Screw diameter: 30 mm good condition
Key data: 250 kN, 29 g/PS, 22 mm
Year of Make: 2005 Clamping force: 25 tons. Capacity: 38 cm³ Screw diameter: 22 mm Good condition
Key data: 500 kN, 95 g/PS, 30 mm
Year of Make: 2005 Clamping force: 50 tons. shot volume: 106 cm³ shot weight: 95 gr./PS Screw diameter: 30 mm with take off robot Good condition
3 x Ferromatik injection moulding machines Ferromatik K155, built in 1999 Ferromatik K275S, built in 2000 Ferromatik K200, built in 2000
Guillotine, reel slitters for paper and plastics 50 T, Working width 2.500 mm, Working height 850 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulik pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., See item [RES100](.germanplast.eu/listings/4115633-guillotine-reel-slitter) for full description., Force: 50 T
GUILLOTINE PAPER AND FILM REEL SLITTER 50 T, Working width 2.500 mm, Working height 1.250 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., See item [RES100](.germanplast.eu/listings/4115633-guillotine-reel-slitter) for full description., Force: 50 T
Guillotine, reel slitters for paper and plastics 2500x850mm, Working width 2.500 mm, Working height 850 mm, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T
Guillotine, reel slitters for paper and plastics 35 T, constructed in sturdy painted steel,, Working width 2.500 mm, Working height 1.250 mm, No.2 pumps 30+30 lt/min Volume 21+21 ccm, Speed up : 84 mm/sec, Speed down : (80 Bar) 40-20 mm/sec, Oil tank 175 lt, Cutting force 2x17,5 Ton., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Increased speed system, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T
Guillotine, reel slitter for paper and plastics 25 T, Working width 1.500 mm, Working height 850 mm, Cutting force 1x25 Ton., 7,5 Kw drive 400V 50 Hz, No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, OIl tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 25 T
Guillotine, reel slitters for paper and plastics 50 T, Working width 3.000 mm, Working height 1.250 mm, No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 41-20 mm/sec, Oil tank 255 lt., Cutting force 2x25 Ton., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50To, installed power - used power in work: about 60-65% : 15
Guillotine, reel slitters for paper and plastics 30T, Working width 1.500 mm Working height 1.250 mm Cutting force 1×30 Ton., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt. Single piston with 2-sides racks to avoid any oscillations and swaying 7,5 Kw drive 400V 50 Hz Safety devices included : Emergency STOP button+ pull-rope STOP+ Knife protection + 2-hands operation + protection grids + hydraulic knife locking system. hydraulic pack can be lodged on top for space saving Complete with control panel User’s manual, drawings, CE compliance for overseas transport, you will need an out-of-gauge 20’fcl Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Size for transport: LxWxH 2,5 x 1,5 x 2,50 m. + 0,8 x 0,6 x 1,0 m. (hydrauluc pack), Force: 30 T, width: 1.500 mm.(59.06), height (cutting): 1.250 ...
Guillotine, reel slitter for paper and plastics 60 T, Working width 3.000 mm, Working height 1.500 mm, Increased speed system, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T
Guillotine, reel slitters for paper and plastics 60 T, Working width 3.500 mm, Working height 1.500 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15
Guillotine, reel slitters for paper and plastics 60 T, Working width 3.500 mm, Working height 2.000 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T
Guillotine, reel slitters for paper and plastics 35 T, Working width 2.000 mm, Working height 1.500 mm, Increased speed system, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T
Guillotine, reel slitter for paper and plastics 35 T, Working width 2.000 mm, Working height 1.250 mm, Increased speed system, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T, availability: now in stock, working width: 2000 mm, conditions: new machine, type: compliant with EU safety regulations
Guillotine, reel slitters for paper and plastics 35 T, Working width 2.000 mm, Working height 850 mm, No.2 pumps flow 30+30 lt/min, Pumps volume 21 + 21 ccm, Speed up to 84 mm/sec, Speed down:(80 Bar) 20-40 mm/sec, Cutting force 2x17,5 Ton., 9 Kw drive 400V 50 Hz, Oil tank 175 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T
Guillotine, reel slitters for paper and plastics 30 T, Working width 1.500 mm, Working height 850 mm, Cutting force 1x30 Ton., 7,5 Kw drive 400V 50 Hz., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 30 T
Guillotine, reel slitters for paper and plastics 25 T, Working width 1.500 mm, Working height 1.250 mm, Cutting force 1x25 Ton., 7,5 Kw drive 400V 50 Hz, No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, OIl tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 25 T
Guillotine, reel slitters for paper and plastics, - These reel splitters are particularly recommended to reduce the size of scraps before a further recycling process. They are ideal for paper, plastic, fabric, rubber, polylaminated, AL foil, in the shape of REELS, BALES, LOOSE MATERIAL, FIBERS, and more., - Proposed in different standard dimensions and cutting forces, or bespoke to project, these machines feature a sturdy steel structure, top quality components and are constructed according to the strictest EU regulations to perform at their best and keep their value in the years with the simplest maintenance., - Sturdy and reliable, these guillotines give excellent performances even on lower tonnage, for paper and plastic film reels., - with increased speed system, our guillotines can double the work done, compared with other models., - One operator is needed to work in full safety cond ...
Engel injection moulding machine ES 1350 / 275 HL built in 2000 for sale.
Year: 2007 - technically efficient, ready to work – after full service - disc cutter: 250 mm - 4 CNC axes - working height: 200 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/outfeed table
TECHNICAL DATA OF THE MACHINE General Clamping force: 50 t Year of manufacture: 2006 Control: NC4 Weight: 2,700 kg Dimensions (L × W × H): 3.8 × 1.1 × 2.1 m Injection unit – .../200 Screw diameter: 22 mm Injection volume: 41.8 cc Specific injection pressure: 2,800 bar Closing system – 50/... Clamping force: 50 t Tool plate dimensions: 520 × 520 mm Clearance between columns: 355 × 355 mm Tool height: 210 mm Opening Distance: 400mm Maximum Plate Distance: 610mm
Line for filling delicatessen products into plastic - trays, consisting of:, Vessel filling system, brand Waldner, type 12.3, year 2011, 2-track (2 different formats) – however, only single-track operation is possible., Format section 1: Round cup diameter 100mm (including edge) height 80mm and 60 mm, Format section 2: rectangular cup 185mm long 135 mm wide (incl. edge) 35mm deep, The shells are sealed with film from the roll, Roll magazine about 500mm long, 400mm wide, Space requirement Waldner: approx.: 2,100 m 2,100 mm, Discharge belt of Waldner: approx 1,800 mm, Dosing of liquid and free-flowing components:, The plant has two filling heads, which are filled via piping directly from the boiler., The pipe system can be fully purged., The toad line and Maso – Sinus Pump, type SPS 3, are included in the scope of delivery., Feeding of the multi-head weigher using two belt conveyors:, ...
used screening machine, function-tested, immediately available
Injection Molding Machine Specifications 1. Main Machine Parameters Clamping force: 25 t Tool clamping system: 25 / ... Tool plate dimensions: 400 × 400 mm Clearance between columns: 220 × 220 mm Maximum Plate Distance: 425mm Ejector stroke: 95 mm Ejector force: 18 kN Year of manufacture: 2001 Weight: 2000 kg Dimensions (L × W × H): 2.9 × 0.9 × 1.9 m 2. Injection Unit Injection Unit: ... / 60 Screw diameter: 18 mm Injection volume: 20cc Injection weight: 18 g Specific injection pressure: 2500 bar Screw L/D ratio: 24.5 3. Controls Control System: Selogica
Year: 2006 - technically efficient, ready to work – after full service - 2 pneumatic motors (top + bottom) - disc cutter: 250 mm - 2 CNC axes - working height: 140 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/Outfeed table
Extruder + electric cabinet output: 200 kg Heads not included Winder not included
A Cyklop strapping machine is being sold. Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded. Price is net Loading facilities available All information without guarantee
We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 3500t of clamping force and the relocation of industrial plants throughout Europe. Offered: Krauss Maffei 125-520 C2 injection moulding machine Machine Specifications General information Year of manufacture: 2004 Controls: MC4 Weight: 6000kg Dimensions (L × W × H): 4.5 × 1.5 × 2.2 m Clamping force: 125 t Tool Clamping System: 125 / ... Tool plate dimensions: 745 × 770 mm Ground clearance between columns: 470 × 470 mm Tool height: 300 mm Opening Distance: 600mm Maximum Plate Distance: 900mm Ejector force: 22 kN Ejector stroke: 150 mm Injection Unit: ... / 520 Screw diameter: 45 mm Injection volume: 275cc Injection weight: 250 g Specific Injection Pressure: 1878 bar ...
Key data: 2000 kN
Clamping unit very well preserved, see pictures, also fits 570A as a spare part
maximum number of results exceeded
please refine your search
