made in italy used for sale

Hydraulic injection moulding machine manufactured in 2014. This Arburg 470 H 1000-170 features a closing force of 100 tons and a screw diameter of 15/25 mm. It includes a selection unit and a single platen design, with a beam spacing of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 470 H 1000-170 machine we have for sale. Contact us for further details.

Offer Rickmeier Gear Pump for sale. Suitable for part no. 1248201

B&A REF: 9253 TON: 55 SCREW DIAMETER: 32MM SHOT WEIGHT: 92.3 STROKE VOLUME: 96.5CM3 INJECTION PRESSURE: 2127AR PLATEN SIZES: 565 X 540MM DBTB: 360 X 335 MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 400MM MAX DAYLIGHT: 650MM EJECTOR STROKE: 80MM CONTROLS: ALPHA MOTOR: 11 SERVO HEATING CAPACITY: 7.7KW

Offer water pump with drive for sale. Part. 401920

Binder heating system Wood chip heating Type RRK 640-850 Year of construction 2013 For steam and hot water production Heating capacity up to 850 kW Maximum operating temperature up to 150 °C Maximum operating overpressure 12 bar Water capacity 1520 litres Hydraulic insertion from the right front side (instead of stoker auger) Heat exchanger separately Without material feed from the bunker Flue gas cleaning via cyclone

Mawera heating system Wood chip heating Type FU 550 RIA Year of manufacture 2001 Heating system for wood chips Insertion with feed screw Stoker screw Heating capacity up to 550 kW Including dismantling and loading

Bottling plant with canteen kitchen, which is located in a complete enclosure, is sold due to site closure. 7 pieces of Schneider cooking kettles in V2A double-walled heated with a 24KW) 400 litres (together 2800 litres!) and a Nüssler extraction system and a Novapack filling system (rotary machine) with LFA air filter system and complete equipment for filling currently 500 gram cups with UV disinfection solution for cups and circuit boards. Plastic lids are placed fully automatically after capping. See photos for details. Various accessories and spare parts are also sold as the site is closed. The facility has been proven to have been used very little and can still be visited until the end of March 2026. System available immediately from site. Lead time for optional dismantling and delivery and assembly currently approx. 2 weeks. A bottling plant with a commercial kitchen, housed in a ...

Key data: 2500 kN, 700 g/PS, 60 mm

Year of construction 2002 Screw diameter 60mm Shot volume 735cm³ Clamping force 250t Min. mould installation height: 250 mm 2 Core pulls 1 air valve handling/robot ENGEL ECR 52/1-EA,RC100 6 integrated hot runner zones Operating hours only 14,109 h

OPTREL PWL, SEMI-AUTOMATIC INSPECTION MACHINE Semi-automatic inspection machine for small volumes and products requiring inspection. Particles and imperfections are visually checked by an operator with a high-magnification lens and a brightness-adjusted setup. Built in 2003. CHARACTERISTICS Wide product range (ampoules, vials and cartridges for injectable liquid products) Change parts optimized for quick change over and small footprint (size: 2250 x 1750 x 2100 mm) Output: 100 units/min Working height: 900 ± 25 mm

Hydraulic injection moulding machine manufactured in 1999. This Engel ES 16050/1100 DUO features a clamping force of 1100 T and a screw diameter of 150 mm. It has an opening stroke of 1800 mm and a total weight of 77,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 16050/1100 DUO machine we have for sale. Contact us for further details.

Offer B&R EX 481 + AF104 equipped with AO352 and AI774 for sale.

KEG wash and fill, 7-10 KEG/h, manual, new

Key data: 8000 kN, 3743 g/PS, 105 mm

Year of Make: 1999 Clamping force: 800 tons Screw diameter: 105 mm Injection weight: 3743 gr./hp incl. Removal robot Wittmann Protective enclosure The machine has been regularly serviced and is in good working condition

KEG wash and fill, 20-30 KEG/h, automatic, new

Manufacturer: KraussMaffei Model: KM 350-2700 C2 Year of Manufacture: 1998 Type of Machine : Injection Moulding Machine Machine Weight: 16,000 kg CE Certified: Yes Find more here - / Contact us at -

Manufacturer: Engel Model: 330/75 HL Year of Manufacture: 2002 Type of Machine : Injection Moulding Machine Machine Weight: 5,850 kg Find more here - / Contact us at -

Manufacturer: Engel Model: ES 200/90 HL Year of Manufacture: 1999 Type of Machine : Injection Moulding Machine Machine Weight: 5,900 kg Find more here - / Contact us at -

A Krauss-Maffei large-format injection molding machine without robots, conveyors, protective housing and attachments is available. Clamping force: 1300t, injection volume: approx. 8000cm³. Total system dimensions X/Y/Z: approx. 13000mm/3550mm/2850mm, machine weight: approx. 83000kg, operating hours: 73259h, production hours: 57753h. Documentation available. On-site inspection is possible. Expected to be available from Q1/2026.

Four Engel injection molding machines are available. 1) Engel ES 750/150 HL, year of manufacture: 2006, core pulls: 2, screw diameter: 55mm, shot volume: 511cm³, injection pressure: 1616bar/2052bar, nozzle stroke: 350mm, nozzle contact force: 67kN, clamping force: 1500kN, opening stroke: 606mm, ejector force: 60kN, ejector stroke: 150mm, min. mold installation height: 294mm, platen dimensions X/Y: 750mm/520mm, weight: approx. 9500kg, control system: CC100, operating hours: approx. 79000h. Including Engel HLi automation robot. 2) Engel ES 80/30 HL, year of manufacture: 1995, core pulls: 2, screw diameter: 22mm, shot volume: 38cm³, injection pressure: 1500bar/2050bar, nozzle stroke: 200mm, nozzle contact force: 28kN, clamping force: 300kN, opening stroke: 330mm, ejector force: 24kN, ejector stroke: 70mm, min. mold installation height: 110mm, platen dimensions X/Y: 550mm/380mm, weight: ap ...

Key data: 40000 , 8100 , 130

KRAUSS MAFFEI KM4000 - 19000 MC Clamping force: 4000 T / 40000 KN Year : 1998 Screw diameter : 130 mm Injectable volume : 8100 gr Distance between tie bar : 2240 x 1800 mm Platen dimensions : 3340 x 2940 mm Min / max mold thickness: 1100 / 2000 mm Opening stroke: 4200 mm Stroke of the ejection unit : 350 mm Weight : 255 T   + KUKA robot

Manufacturer: Demag Model: Ergotech 110/470-310 concept Year of Manufacture: 2005 Type of Machine : Injection Molding Machine Find more here - / Contact us at -

Presse à injecter SANDRETTO Micro 30T E SANDRETTO micro 30T E247 Version 2 GEFRAN Interface robot Euromap 12 Boite à eau 4 voies Tableau de prises

Sandretto Serie 9 type 4170/500 - 500 T Year : December 2002 Clamping Force : 500 T Screw Diameter : 80mm Injection Volume : 2056 cm3 Injection Pressure : 2027 bar Platen Sizes : 1300 x 1300 mm Distance Between tie bars : 900 x 900 mm Tie Bar Diameter : 150mm Min/max mold high : 300 / 1000 mm Moving Platen Stroke : 950mm Ejector Stroke : 380mm Oil Filling : 900 Litres Dimensions : 8520x2660x2165 mm Weight : 21,000Kg

Internal grinding machine VOUMARD 52A

Injection moulding machine Engel DUO 4550/800 BJ 2004

Key data: 2600 kN, 950 g/PS, 70 mm

Year of manufacture 2005 Clamping force: 260 tons. Screw diameter: 70 mm Operating hours: 125,000 h incl. removal robot: Engel ERC 55/O-E Good condition, regular maintenance, energized

Key data: 1500 kN, 380 g/PS, 50 mm

Year of manufacture 2005 Clamping force: 150 tons. Screw diameter: 50 mm Operating hours: 117,426 h incl. removal robot: Engel ERC 34/1-E The machine is in good condition, and has been regularly serviced

Empty Bottle Inspector Heuft InLine reflexx Release 9, Pre-sorting of the Heuft Spectrum SX TB 72 and the associated Gateway II (network connection) (output max. 72,000 bph; Built in 2009). The following types of bottles can currently be checked: • 0.33 l ale / green / KK • 0.33 l Ale / brown / KK • 0.50 l NRW / brown / KK • 0.50 l NRW / clear / SV • 0.50 l Euro / brown / KK • 0.33 l swing-top bottle / brown / embossing • 0.50 l swing-top bottle / brown The following checks are carried out: • Pre-sorting Heuft Spectrum SX TB 72: - Bottle shape - Bottle height • Empty bottle inspector Heuft InLine reflexx Release 9: - Sidewall inspection (inlet and outlet) - Muzzle inspection - Thread inspection - Soil inspection - Residual liquid (IR/HF) - Additional detection in the outlet for any sticking labels in the neck area - Test bottle detection T ...

Wheel type disc atomizer with high speed belt driven motor. Motor power: 22 kW - 30 HP. Can be used for a spray dryer with an output up to 1.000 kg/h of powder. Wheel diameter: 210 mm. Stainless steel AISI316L wheel. Sanitary execution. Weight 400 kg., Type of Machine: Atomizer, Capacity: Used for a spray dryer with an output up to 1.000 kg/h of powder, Wheel diameter: 210 mm, Motor: 22 kW - 380 V - 42,5 A - 2.935 rpm - 50 Hz - 3 Ph, Dimensions: 120 x 120 x 235 cm, Weight: 400 kg

The GEA Nu-Con CV 375 C is a Convey Through Sanitary Rotary Valve (Airlock) for use in gravity or pneumatic conveying systems, handling food, dairy, pharmaceutical, nutritional products and other dry ingredients. Quick disassembly without tools allows for rotor removal and access to all product contact areas for inspection and cleaning. The rotary valve has 8 bladed cylindrical rotors and accurately gauged clearances are maintained between the rotor tips and ends within the valve bore. Blow through (CV) with product entering at the top and discharging horizontally at 90 ° to inlet via a pneumatic conveying line, either vacuum or pressure. Previously used for transporting of Casein in a dairy factory. Material: SS SS AR. Drawing No. A3-33456-01. Motor: 0,25 kW - 220-240 / 380-415 V @ 50 Hz or 240-266 / 415-460 V @ 60 Hz - 1.300/27 rpm or 1600/34 rpm - 1,27/0,73 Amp or 1,15/0,66 Amp - 3 P ...

The GEA Nu-Con CV 375 C is a Convey Through Sanitary Rotary Valve (Airlock) for use in gravity or pneumatic conveying systems, handling food, dairy, pharmaceutical, nutritional products and other dry ingredients. Quick disassembly without tools allows for rotor removal and access to all product contact areas for inspection and cleaning. The rotary valve has 8 bladed cylindrical rotors and accurately gauged clearances are maintained between the rotor tips and ends within the valve bore. Blow through (CV) with product entering at the top and discharging horizontally at 90 ° to inlet via a pneumatic conveying line, either vacuum or pressure. Previously used for transporting of Casein in a dairy factory. Material: SS SS AR. Drawing No. A3-33456-01. Motor: 0,25 kW - 220-240 / 380-415 V @ 50 Hz or 240-266 / 415-460 V @ 60 Hz - 1.300/25 rpm or 1600/30 rpm - 1,27/0,73 Amp or 1,15/0,66 Amp - 3 P ...

The NETZSCH NM031BY02S12B NEMO® pump is a progressing cavity pump (also known as a mono or screw pump), engineered for the continuous and gentle transfer of challenging media. This pump operates on the well-proven progressing cavity principle, consisting of two primary components: a precision-machined helical rotor and a resilient elastomer stator. The rotor features a single-helix design with a large pitch, deep thread profile, and small core diameter. As the rotor rotates eccentrically within the stator, sealed cavities are formed that convey the product continuously and pulsation-free from inlet to outlet. This pump is previously used in a dairy factory. Motor: 0,75 kW - 230/400 V - 50 Hz - 1.375 rpm - 3,64/2,10 A. Connections on the inlet/outlet: DN 50. Current capacity: 70 - 400 ltr/h. Pressure: up to 8 bar. Rotor speed: 30 - 150 rpm., Key Advantages:, - Valve-free design with stab ...

CONTROLS   CNC controls MOULD CLAMPING UNIT   locking force: 350 to   die opening stroke max.: 350 mm EJECTOR (TABLE EJECTOR)   stroke: 150 mm INJECTION UNIT   stroke of screw: 80 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3700 mm   space requirements -front/back-: 1300 mm   total height: 2100 mm   total weight approx.: 2300 kg Features: - Includes pellet dryer: Labotek DDM 60 ALB3 units available

1 of used column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Posifil PFC, new 2015! (excellent condition). Standard column 2.000 mm tall with 500 mm extension. Designed for a maximum lifting load of 125/155 lbs (56.7/70.31 kg). Maximum radius 3.000 mm. Vertical stroke 1.800 mm. With operating console for reel-gripper (vacuum, with booster) or safety hook (originally used for lifting rolls of labels). Operating manual (English) with pneumatic diagram and parts list available (as pdf). Two devices available. Visible frame is for transport purposes only and not included.

2 x Battenfeld injection moulding machines type: TM 180/750 BJ 2010

Code: 0072 Brand: T.O.P. ITALIA Model: FS 850 - CE Standard Drilling and inserting gluing machine + dowel pins on horizontal workpieces for furniture, custom-made furniture, kitchens, bathroom furniture - CE Standard - Year 2018 Technical data: Maxworkable length mm 1600 Max workable height 850 Panel thickness mm 8 - 50 Independent drilling aggregate: Rotation speed 6000-18000 rpm - Max drilling depth mm 35 - Drilling depth adjustment - Hole cleaning system Glue + dowel insertion unit: Dowel dimensions mm 8 x 30 - Max dowel protrusion 15 mm Glue and water system: Container for automatic glue feeding and system cleaning Feeder for automatic pin loading Numerical control and operator interface: Albatros numerical control for 4-axis control - Touch screen supervisor PC - Monitor 12" TFT - Windows operating system - Parametric CAD 3D TPAEdi32 Compressed air 6 bar Overall  ...

Throughput capacity: 6000kg/h, injection rate: 40mm/stroke, belt width: 690mm, needle rows: 2, infeed height: 280mm, injection volume: 3-70%, ambient temperature: 2-40°C, pressure: 0.3-4.2bar, connected load: 10.1kW, current: 21.4A, length: 1394mm, width: 1298mm, height: 1954mm, weight: 550kg. An on-site inspection is possible.

Robot KUKA KR3 R540 sixx KRC4 complete profinet only 582 hours Year of manufacture: 47/2016 Number of axes: 6 Max. load capacity: 3 kg Max. working range: approx. 540 mm Scope of delivery: robot, controller, cable, teach panel 2 weeks commissioning warranty. No further warranty In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Freely loaded / ex works. Shipping costs abroad on request. Please enter your country, city and zip code.

B&A REF: 9275 TON: 200 SCREW DIAMETER: 55MM SHOT WEIGHT: 451 STROKE VOLUME: 475CM3 INJECTION PRESSURE: 1741AR PLATEN SIZES: 780 X 780MM DBTB: 530 X 530MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 440MM MAX DAYLIGHT: 940MM EJECTOR STROKE: 130MM CONTROLS: VPC 20000E AIR VALVES: 1 HEATING CAPACITY: 12.9KW

B&A REF: 9265 TON: 220 SCREW DIAMETER: 55MM SHOT WEIGHT: 523 STROKE VOLUME: 575CM3 INJECTION PRESSURE: 1550AR PLATEN SIZES: 770 X 770MM DBTB: 510 X 510MM MIN MOULD HEIGHT: 210MM MAX MOULD HEIGHT: 630MM MOULD OPENING STROKE: 550MM MAX DAYLIGHT: 1180MM EJECTOR STROKE: 190MM CONTROLS: E-ONE CORE PULLING: 1 AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 14.6KW SCREW DRIVE: HYDRAULIC

B&A REF: 9235 TON: 320 SCREW DIAMETER: 55MM SHOT WEIGHT: 434 STROKE VOLUME: 474CM3 INJECTION PRESSURE: 1650AR PLATEN SIZES: 1040 X 1040MM DBTB: 720 X 720MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 800MM MOULD OPENING STROKE: 600MM MAX DAYLIGHT: 1400MM EJECTOR STROKE: 250MM CONTROLS: SELOGICA TOUCH CORE PULLING: 1 AIR VALVES: 1 MOTOR: ALL SERVO DRIVES SCREW DRIVE: ELECTRIC

B&A REF: 9289 TON: 320 SCREW DIAMETER: 60-35-30MM SHOT WEIGHT: 607H / 132P / 97S STROKE VOLUME: 644 / 144 / 106CM3 INJECTION PRESSURE: 2000 / 2000 / 2500 AR PLATEN SIZES: 1040 X 1040MM DBTB: 720 X 720MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 700MM MOULD OPENING STROKE: 700MM MAX DAYLIGHT: 1400MM EJECTOR STROKE: 250MM CONTROLS: SELOCIA TOUCH CORE PULLING: 3 AIR VALVES: 2 MOTOR: SERVO HEATING CAPACITY: 22 + 7.7 + 7.7KW ROBOT INTERFACE: EUROMAP 67 ROBOT: MULTILFT SELECT 15KG QUER SCREW DRIVE: ELECTRIC HOT RUNNER: 18 ZONE ACCYMULAQTED: 6

B&A REF: 9259 TON: 370 SCREW DIAMETER: 70MM SHOT WEIGHT: 1060 STROKE VOLUME: 1175CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 1070 X 990MM DBTB: 710 X 630MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE: 710MM MAX DAYLIGHT: 1460MM EJECTOR STROKE: 275MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 2 AIR VALVES: 1 MOTOR: 37 HEATING CAPACITY: 27KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC

High-pressure injection system for your filler between filler outlet and infeed of the capping machine consisting essentially of: - High-pressure pump including frame - Heating system as well as valves - Nozzle unit - Electrical control cabinet - Pressure tank A technical description including pictures can be found in the attachment by an offer.

Awaiting refurbishment at our headquarters in Northamptonshire is this Engel VC500/120 injection moulding machine with double pneumatic and single hydraulic core pull. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Inc ...

Awaiting refurbishment at our headquarters in Northamptonshire is this Boy 22AVV injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and ad ...

Awaiting refurbishment at our headquarters in Northamptonshire is this Engel VC500/120 injection moulding machine with double pneumatic and single hydraulic core pull. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Inc ...

Ingredient trolley with 8x Werit plastic tubs 25 l Newâœ" Ingredient trolley:âœ" Condition: Newâœ" Material: stainless steel, heavy quality, very robustâœ" with welded stainless steel lidsâœ" On four swivel castorsâœ" with 8 shelves/supportsâœ" Inner dimensions: 61.5 x 46.5 cm (WxD)âœ" Outer dimensions: 67 x 47 x 177 cm (WxDxH)âœ" Container:âœ" Manufacturer: WERITâœ" Condition: Newâœ" Material: HDPEâœ" Colour: White 25 lâœ" Version: Bottom closed, sides closed, handle stripâœ" Outer dimensions 61 x 44 x 15 cm (WxDxH)Details see pictures.Is the right item not listed? We

Ingredient Container Plastic Containers / Plastic Tubs 25 l Newâ â Product Descriptionâœ" Manufacturer: WERITâœ" Condition: Newâœ" Material: HDPEâœ" Colour: Whiteâ€Ó" Volume: 25 lâœ" Weight: 1.3 kgâœ" Version: Bottom closed, Sides closed, Handle stripâœ" Stackableâœ" Inner dimensions: 55 x 37.5 x 14.5 cm (WxDxH)âœ" Outer dimensions: 61 x 44 x 15 cm (WxDxH)âœ" The price is for 5 piecesDetails see pictures.Is the right item not listed? We have a wide range of machines and accessories for bakeries, pastry shops and restaurants. Feel free to contact us or

Conveyor belt inclined conveyor 230 V 50Hz 0.12kW On rollers Dimensions : W:64cm D: 113cm H: 70cm Belts width 40cm Details see picture