made in italy used for sale

Factory liquidation mask production. Installation 2021, out of service since March 2022. The systems have already been dismantled and ready for delivery. Stationary industrial vacuum cleaner Power 2.2 KW Air flow rate 300 m/min Suction port 40/50 mm Weight 30 kg

Properties Volume 8100 L Material V2A (AISI 304) 1.4301 Vertical design Number of feet 3 Total height 3350 mm Height 2500 mm Diameter 2200 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 2000 kg Manufacturer: Gross Built in 1993 Working temperature 20 C Isolated design

Key data: 1300 kN, 475 g/PS, 55 mm

Technical data: Clamping force: 130 t Year of Make: 2008 Shot weight: 475.9 g Injection unit: 1000 Screw diameter: 55 mm Specific injection pressure: 1904 bar Displacement: 523 cc Clamping platens (dimensions): 745 x 745 mm Clear width (spar dimension): 470 x 470 mm Ejector force: 22.6 kN Tool installation height (min.): 300 mm Opening travel: 600 mm Max. panel spacing: 900 mm Weight: 8000 kg Control: MC5

200 ml bottle form set with shampoo nut

Key data: 10 liter, 8 liter, 1

available 10l tangential mixer Description attached!

Industrial Table Cooler – Van Spall Associates We are offering a Used industrial table cooler from Van Spall Associates, a division of CHP Engineering Services Ltd – built for durability and high-efficiency cooling in demanding industrial environments. Product Specifications: Model No: ABC 123 9303 - DTS Serial No: 0204 D 9351 Test Pressure: 20 BAR Design Pressure: 16 BAR Design Temperature: 90°C / 115°C Date Tested: 13/11/99 Condition: Fully functional, tested, and ready for deployment This robust table cooler is ideal for heat exchange and cooling applications in industrial and power generation settings. Available for immediate sale! For inquiries and pricing: financeukpowergeneratorsltd.com 07379 844145

Key data: 3500 kN, 70 mm

DEMAG Ergotech 350/710-2300 Concept • Clamping Force: ~3,500 kN (≈350 ton) • Injection Unit: • Screw Diameter: typically 70 mm • Injection Volume: ~1,212 cm³ • Injection Pressure: up to ~1,877 bar • Tie Bar Spacing: ~710 × 630 mm • Plate Dimensions: ~710 mm plate width • Opening Stroke: ~675 mm

Filling and packaging line for spirits in glass bottles (0.2 L, 0.5 L, 0.7 L, 1.0 L bottles with PP31.5), Pos.1:, 1 piece vacuum filler Seitz Compakta incl. vacuum, Solomaschine with 15 filling valves, Direction of rotation: right-left, Year of manufacture: not specified, Very good condition, Pos.2:, 1 piece Alcoa aluminum screw cap, Solomaschine mit einem Verschließkopf, Direction of rotation: right-left, Year of manufacture: not specified, Very good condition, Pos.3:, 1 piece TLG cap setter and BEER, Shrink wrap machine – never in operation, Pos.4:, 1 piece bottle handling system including accumulation table, Good condition, Pos.5:, 1 piece labeling machine KOSME for self-adhesive labels, with four bottle disc for abdomen, chest and, Back label, Year of construction: 2007, Very good condition, Pos.6:, 1 piece carton sealing machine Brand: Strapex /Switzerland, Type: Locktape 50, Yea ...

Transnorm Rising falling Incline with forerun belt conveyor GF 6000+800-600-500 RA2449 Technical data: Conveyor length (NL): 6800 mm (800 mm forerun + 6000 mm incline) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R27 DT80N4/BMG/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6800 ( 6000 + 800 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eu ...

Key data: 1800 kN

Clamping force: 180 t; 4-column toggle system; tie-bar spacing: 480×480 mm; platen size: 720×720 mm; mold height: 150–550 mm; opening stroke: 396 mm; ejector stroke: 130 mm; screw diameter: 60 mm (to be confirmed); injection volume: 678 cm³; 4 heating zones; power supply: 3×380 V–50 Hz; installed power: 45.3 kW; machine dimensions: 5950×1400×1920 mm; weight: 6700 kg; Machine No.: ED1020.

-Manufacturer: Trotec - Model: Speedy100c-8063 -Date of manufacture: August 2022 -Serial number: S1-7145 -45 watts CO2 -230 V -50 Hz -with autofocus -with air conditioning - with 2.0" lens -with cutting table 12.7 mm -with performance upgrade -with X-axis with 2 carriages -Rulers in mm incl.: -Suction -Manufacturer: Aigner/Trotec -Model: 8401 Atmos Cube Speedy 230 V - Serial number: 01732-18928 -8247 Exhaust Connection Cable -Suction operating hours: approx. 1639h Shipping available on request. Sale only to tradespeople.

Key data: 1280 kN

Clamping force: 128 t. Tie-bar spacing: 410 × 410 mm. Machine no. 13A350 Platen size: 650 × 652 mm. Mold height (min–max): 140–440 mm. Opening stroke: 360 mm. Ejector stroke: 95 mm. Ejector force: 4 t. Screw diameter: 42 / 47 / 53 mm. L/D ratio: 21.9 / 19.6 / 17.4 Diam. 42: 216 g. Diam.47: 271 g. Diam.53: 344 g. Injection volume: 235 / 295 / 375 cm3. Injection pressure: 2005 / 1600 / 1260 kg/cm2. Injection stroke: 170 mm. Screw rotation speed: 0–200 rpm. Machine dimensions (L × W × H): 5.0 × 1.2 × 1.88 m Machine weight: 4500 kg.

Key data: 800 kN

Clamping force: 80 t. Clamping type: Toggle system. Tie-bar spacing: 270 × 310 mm. Platen size: 310 × 310 mm. Mold height: 150–270 mm. Opening stroke (approx.): 310 mm. Ejector stroke: 70 mm. Screw diameter: 26 mm (to be confirmed), Injection volume: 124 cm³. Injection weight (PS): 60–103 g. L/D ratio: 19–22:1. Approx. machine dimensions: 3500 × 1200 × 1600 mm. Weight: 3000–4000 kg. Machine No.: 200000800292.

incl. 20 m roller conveyor, brand Laeisz & Lüders, with new S7 control unit (Teyfel) from the year 2015, Process for Big Bag filling:, - You program the desired setpoint on the big-bag scale., - On the roller conveyor 3.1 empty pallets are placed on and moved over the button, Palette” acknowledged on an external control unit., - The empty pallet is driven onto the scale of the roller conveyor 3.2 and the BigBag scale is tared to zero, - An empty big bag must be hooked into the load hooks and the, Fill nozzle pulled over the puff hose on the fill pipe (external switch S6), Expansion hose., - The Start Big-Bag button starts the filling:, · The filling head moves to the top position, · The filling flap opens and the dosing chute feeds in the coarse/fine flow the, Target quantity in the big bag, · After reaching the fill level, the fill flap closes., · Open the load hooks and deflate  ...

1 dedusting with ring ionization with the option of installing the system on an existing transport. Cleaning perpendicular to the direction of flow of the automatic spray gun. With integrated electro-mechanical linear drive. 2 compressed air-operated, rotating blow nozzles move in an oscillating manner across the direction of the workpieces. The dedusting is provided with two side exhaust hoods through which the dust-free air is removed from the workpieces. 1 ring ionization for the elimination of static charges on the workpiece surfaces, attached to the oscillating / rotating Nozzle holder, including high-voltage power pack (not in EX) with voltage display and connection cable between ionizing bar and power pack The dust extraction system must be connected to a dust extraction system, min. 5,000 sqm / h. - Producer Venjakob - Year of construction 2009 - Working width 1300 mm - Feed sp ...

Key data: 1500 kN

Clamping force: 150 t. Clamping type: Toggle system. Tie-bar spacing: 470 × 470 mm. Platen size: 700 × 700 mm. Mold height (min–max, approx.): 180–500 mm. Opening stroke: 420 mm. Ejector stroke: 130 mm. Injection volume: 320 cm³. Screw diameter: 42/45 mm (to be confirmed). Heating zones: 4. Machine dimensions: 5000 × 1400 × 2000 mm. Machine weight: 6000–7000 kg.

Clamping force 135 t, toggle clamping system with 4 tie bars, tie-bar spacing 400 × 400 mm, mold height 150–500 mm, opening stroke 400 mm, ejector stroke 150 mm, screw diameters 45/50/55 mm, injection volume 286–427 cm³, injection pressure 1210–1800 bar, 4 heating zones, installed power 31 kW, overall dimensions approx. 4,900 × 1,200 × 2,050 mm, weight approx. 5,000–5,700 kg. Machine No. 959.

Transnorm Rising falling Incline belt conveyor with leading belt GF 5800+1000-600-600 RA2454 Technical data: Conveyor length (NL): 6800 mm ( 5800 mm riser segment + 1000 mm forerun) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,35 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6800 ( 5800 + 1000 ) Nominal / outside width in mm: 600 Belt width in mm ...

Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement.

Two identical compressors with integrated refrigerated dryer are offered. Pressure dew point: +3°C, rated power: 30kW, delivery rate (FAD): 5.31m³/min at 8bar, 4.77m³/min at 10bar, 3.86m³/min at 13bar, control: Boge Autotronic, fully automatic operation. Inspection is possible by arrangement.

Technical data according to Muller Martini

Radio Shuttle pallet rack, 2 blocks of 312 storage spaces (total 624 spaces), max. pallet weight 1.000kg, for Euro and industrial pallets, 3 pcs Shuttles Stow Atlas 3.1 – used -: Price for 2 blocks and 3 radio shuttles from the location: 49.950.-€ (net), incl. dismantling etc.! Price for purchase of 1 block and 1 radio shuttle: 25.000.-€ (net) incl. dismantling etc.! Price Extra Radio Shuttle: 15.000.-€ (net). Manufacturer shelf: Stow Type: Atlas Shuttle 3.1 / Radio Shuttle Regal Year of Make: 2021 Stand Type: PLFB 15 Pallet type: Euro or industrial pallet Clear shelving width: 1,350mm Truss Type: SRBH 0488 Channel rail type: SRR 0130 Stand height: 6,300mm Number of channels / Euro pallets on top of each other: 4 Number of Euro pallets in a row per channel: 13 (11 industrial pallets) Permissible pallet load: 1,000kg Permissible shelf load (sum of channel  ...

Two custom made but expandable and convertible rotary indexing tables for the soldering process are available: 1) Load capacity: approx. 10kg-15kg, mounting points: 4, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2000mm, weight: approx. 500kg, year of manufacture: approx. 2000. The battery is empty. An on site inspection is possible.

Some older plastic injection molding machines from Arburg, Demag and Stübbe are available. 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, mol ...

Intensive batch mixer with a usable filling per batch of 150 l. / 240 kg (max.), emptying via central bottom flap (hydraulically operated), tools: star whirler and wall-to-bottom scraper. Agitator drive: 11.0 kW via V-belt, drum drive: 3.0 kW via two-track friction wheel, hydraulic power unit: 0.75 kW for bolt actuation. Includes control cabinet with programmable control.

- Fully automatic proofing cabinet for trays - Manufacturer: Gram (Bäkoline) - Type: GA 86 CCG L - Cooling, freezing, heating - With support rails - for 60x40cm trays and also 60x80cm trays - Year of construction: 2021 - Refrigerant: R290 - 230 Volt/ 50Hz 1778W - External dimensions: 238x82x106.5cm HxWxD - Interior dimensions: 147.2x67.8x86.5cm HxWxD - Temperature range: -25 °C to +40°C - Cooling capacity: 882W at -25°C - Weight: 178.6 kg

This line is an automatic filling line designed for the aseptic filling of products with low pH (4.5), such as fruit juices with or without pulp, nectars and other non-carbonated fruity beverages, into 500 ml, 750 ml and 1000 ml barrier carton containers at ambient temperature and further packaging of the containers in cartons for distribution. These products have the same shelf life as Tetra Pak technology. This line has a capacity of 8100 cartons/hour, but can also be set to 7000 and 6000 cartons/hour. Elopak S-PS80HA 2009 Elopak E-PLA-S30 2009 Elopak E-PLA-S30 2009 Elopak E-PLA-S30 2009 Meurer CM/TP 25B 2010 Elopak CSFS 2009 Bottle Conveyor 2009

Krones Triblock (rinser, filler and capper) / 20,000 bph / 1.5l The Krones Triblock from 2005 is a high-performance filling line with an output of up to 20,000 bottles per hour in 1.5-litre containers. The machine is designed for the filling of still and carbonated beverages. It processes bottles with 28 mm closures and integrates the process steps of bottle handling, filling and capping in a compact machine design. The system stands for reliable technology and an efficient production process.

This machine is used for inline inspection of bottles or containers with regard to fill level, closure and labeling.

Miho David 2001 Empty Control System automatically inspects glass bottles for foreign bodies, dirt, liquid residues and bottle defects before filling. Only flawless bottles are filled. Robust design and reliable performance increase process reliability and product quality in beverage production lines. - Up to 25,000 bottles/hour - from left to right

This fully automated line is designed for sorting, repositioning and palletizing mixed beverage crates and has an integrated ERP connection. - Pallet unloader Robogrip 4A-0795 - Modulpal PRO 2A pallet loader - Higher-level control - MultiCo S container transport - Pallet transport Pal CO S - Film wrapper Fabr.Haloila - 2xPallet labeller Fabr. Logopak - Network technology - Site Pilot Line Diagnostick with IT hardware - Electrical energy distributors - Technical documentation

This aseptic Krones line from 2015 offers a state-of-the-art solution for the aseptic filling of sensitive, non-carbonated products such as juice, tea and dairy products. With an impressive output of 18,000 bottles per hour with a bottle volume of 1 liter, this complete line ensures maximum efficiency and productivity while maintaining product quality. Thanks to the dry aseptic technology (dry), the line not only guarantees the highest hygienic standards, but also saves valuable resources such as water and cleaning agents, which makes it particularly environmentally friendly. The line is specially designed for use with PET bottles and offers flexibility in processing different types of closures: flat caps (PCO 1810) with a diameter of 38 mm and 28 mm. As part of Krones' portfolio, this line combines state-of-the-art technology with robust, durable processing to ensure reliable, ase ...

This complete KHS Krones aseptic line from 2005 is specially designed for safe and Hygienic filling of beverages into PET bottles. It offers a fully aseptic process that is suitable for ensures maximum product safety and extended shelf life. The system is suitable for both still and carbonated soft drinks. carbonated soft drinks, with a capacity of 30,000 bph for 0.5l bottles. It supports flat caps with a size of 28 mm (PCO1810) and 38 mm DS 38/15 2T SFB CA (3504). It also allows the use of sleeve labels. The combination of cutting-edge technology and precise control makes this line the ideal choice for manufacturers who value quality and efficiency.

Technical data and specifications This complete production line is suitable for silent and carbonated products. Sterilization with isolator technology STERILJET 2.160-60-113 Ventilation technology isolator aseptic Aseptic rinser with insulator technology VARIOJET 2.880-80-113 Aseptic filler with isolator technology VOLUMETIC VODM-PET 320-120-113 Capper Control unit CHECKMAT 731 FM-X+L Bottle labeling machine CONTIROLL HS 720-15 Control unit CHECKMAT 731 EM Packer VARIOPAC PRO FS Palletizer MODUPAL 1A PCS process control system container transport / conveyor belt SYNCO S container transport / conveyor belt SYNCO S Handle applicator bottle air conveyor AIRCO S MULTICO S package conveyor Pallet conveyor PALCO S Process validation AQUA VARIO DOS CAF-LIQUID ASEPTIC Hygiene Centre Sterile water treatment AQUA ASEPT L 10 m³/h CIP system VARIO CLEAN F AUT-10.000L, 45 m³/h ...

3 x Injection moulding machines Stork 440 to 1 x Injection moulding machine Stork 660 to 2 x Injection moulding machine Stork 900 to

Complete aseptic PET line from Krones for still products – 30,000 bottles per hour / 0.5 l Capacity : 0.5L : Over 30,000 bottles/hour || 1.0L : 25,000 bottles/hour Closure type : 28mm Flat Cap PCO1810 Products : Still beverages such as iced tea and juice Process Type : Wet Aseptic State-of-the-art aseptic beverage production line - built in 2011 - ideal for still products such as iced tea and juices The reliable and powerful Krones aseptic line, built in 2011, is specially designed for the filling of still beverages such as iced tea and juices. With the proven wet-aseptic process, it ensures the highest hygiene standards and optimum product quality. This line is ideal for companies looking for a reliable and flexible solution for the production of premium beverages. Key features Aseptic technology: Ensures maximum product safety through sterile filling processe ...

Complete Krones aseptic PET filling line for still and carbonated products / 25,000l/h Bottle sizes :0.33l, 0.5l, 0.75l, 1l, 1.25l, 1.5l Capacity : 25.000l/h Products : Co² and still beverages Closure type : 28mm PCO 1810 Labeling : OPP Labels (Hot Melt) Filling process : Wet aseptic Number of employees to run the line : 4-5 employees Condition : As good as new This complete Krones aseptic line, manufactured in 2016, is specially designed for the safe and hygienic filling of beverages into PET bottles. It offers a fully aseptic process that ensures maximum product safety and extended shelf life. The line is suitable for both still and carbonated soft drinks with a capacity of 25,000 liters per hour. It supports closures with a size of 28 mm (PCO1810) and allows the use of sleeve labels. The combination of state-of-the-art technology and precise control makes t ...

Key data: 2500 kN, 579 g/PS, 60 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET250-840 Concept Year of Make: 2004 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Max. displacement: 636 cm³ Moulded part weight: 579 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W633-931 2 pcs core train

Key data: 3000 kN, 679 g/PS, 60 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM300-1900C2 Year of Make: 2005 Clamping force: 300 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Max. displacement: 754 cm³ Moulded part weight: 679 g/hp Control: MC5 Equipment: 2 pcs core train Interface Robot Cavity pressure measurement 24-fold hot zone channel control Interface temperature control unit Approx. 76,000 operating hours

Key data: 3000 kN

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM300-1900CX Year of Make: 2011 Clamping force: 300 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Maximum displacement: 769 cm³ Moulded part weight: 692 g/hp Control: MC6 Equipment: 3 pcs. core train Interface Robot 45-fold hot zone channel control Interface temperature control unit Approx. 51,000 operating hours

Key data: 5000 kN, 2 g/PS, 90 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM300-1900CX Year of Make: 2011 Clamping force: 300 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Maximum displacement: 769 cm³ Moulded part weight: 692 g/hp Control: MC6 Equipment: 3 pcs. core train Djbr Rvoxyrc Isf Nysul Interface Robot 45-fold hot zone channel control Interface temperature control unit Approx. 51,000 operating hours

Key data: 2000 kN, 352 g/PS, 50 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2000 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 450 mm Opening travel: 700 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 352 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control

Key data: 2000 kN, 216 g/PS, 40 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2001 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 550 mm Opening travel: 700 mm Screws DN 1: 40 mm Max. displacement: 251 cm³ Moulded part weight in hp: 216 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control

Key data: 2000 kN, 216 g/PS, 40 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2004 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 500 mm Opening travel: 750 mm Screws DN 1: 40 mm Max. displacement: 251 cm³ Moulded part weight in hp: 216 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control

Key data: 600 kN, 94 g/PS, 30 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET60-200 Concept Year of Make: 2003 Clamping force: 60 tons Spar spacing 420 x 420 mm Screws DN: 30 mm Max. displacement: 106 cm³ Moulded part weight: 94 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W621-1381 2 pcs core train

Key data: 4200 kN, 2 g/PS, 80 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM420-4300CX Year of Make: 2012 Clamping force: 420 tons Spar spacing 800 x 800 mm Screws DN: 80 mm Max. displacement: 1,810 cm³ Moulded part weight: 1,647 g/hp Control: MC6 Equipment: 2 pcs core train Interface Robot 12-way hot zone channel control Interface temperature control unit

Key data: 2500 kN, 476 g/PS, 55 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM250-1000CX Year of Make: 2017 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 55 mm Max. displacement: 523 cm³ Moulded part weight: 476 g/hp Control: MC6 Equipment: 2 pcs core train Interface Robot 12-way hot zone channel control Interface temperature control unit

INDUSTRIAL TUMBLER DRYER MACHINE DE CROWN SST-200 BODY MATERIAL: STAINLESS STEEL SUS304/MILD STEEL. CAPACITY (MAX.WET) : 90KG DIMENSION: 2050mm(L) x 1800mm(W)x2200mm(H) POWER SUPPLY: 415VAC 3PH 50HZ. DRUM DIMENSION: 1480mm (OD) x 990mm(L) DRUM SPEED: 29 RPM. CONDITION : MOTOR DAMAGED NEED TO REPLACEMENT THE NEW MOTOR

INDUSTRIAL TUMBLER DRYER MACHINE DE CROWN SST-200 BODY MATERIAL: STAINLESS STEEL SUS304/MILD STEEL. CAPACITY (MAX.WET) : 90KG DIMENSION: 2050mm(L) x 1800mm(W)x2200mm(H) POWER SUPPLY: 415VAC 3PH 50HZ. DRUM DIMENSION: 1480mm (OD) x 990mm(L) DRUM SPEED: 29 RPM. information contact: Ms.Supawadee Kumpone, Manager Procurement, F6 email: supawadeegreatglove.com Tel : +6693-7478585 Office : +6676-620190 Ext : 194 Ms.Wilawan Sakulsongboonsisri, DGM Finance,F6 Tel : +6689-1969222 Office : +6676-620190 Ext : 111

Injection Molding Machine FCS SD 6000 BJ 2016